Impact of slag refractory lining reactions on the formation of inclusions in steel.pdf
Refractory Lining
Transcript of Refractory Lining
Granden Hex Steel Company is one of the leading manufacturers and suppliers of refractory lining
products and services. It has become design, development, manufacture and sales of industrial
enterprises.
Our main products range:
Metal hex grid
Hex steel grid, hex mesh
Hex metal & flex metal
Tortoise shell mesh, turtle shell mesh
Hex metal & flex metal anchor accessories
Our hex steel products are excellent choice of refractory linings in furnaces, reactors, cyclones,
ducts and flues. It is widely used in power plant, cement plant, steel, petroleum, chemical industry,
power generation and other large devices. The hex metal can largely improve the heat erosion and
abrasion resistance.
Our commitment:
We produce quality standard Metal Hex Grid Refractory Lining products. And we provide best
services to meet our customers' requirements and satisfaction.
If there is something you are looking for but can't find on our website or need more information
about metal hex grid refractory lining products, please contact us.
http://www.refractorylining.net [email protected]
Metal Hex Grid Refractory Lining With Hexagon Big Mud Claw , Carbon Steel or Stainless Steel
Metal Hex grid is also known as hex metal, hex metal grating, hex steel mesh, Hex steel grill or
hex steel grid. Metal Hex grid provides surface framework for reinforcement of the refractory or
concrete material in linings. They are made of pressed strips riveted to each other to form the
hexagonal apertures.
Hex metal refractory lining is a hexagonal cellular mesh grating specifically designed for
reinforcing both linings and flooring. The hex steel mesh acts as a surface framework to hold
cement or refractory in position, and relieves stress in the lining's upper crust, which prevents
spalling and cracking. As a result of hex metal's strength and unique design, abrasion and
corrosion are retarded and refractory life is significantly extended. Even hot gaseous substances
cannot erode the refractory because they are reflected away from the surface by the metal cellular
grid.
Specifications:
Thickness: 1.2cm-2.5cm
Hole Shape: Tortoise
Excellency: Hexagon Big Mud Claw Tortoise Shell Mesh reinforces effectively
Anchor ability and interlink strength with liner material. It can prevent the layer break from anti-
heat and heat preservation, thus enhancing the unite strength of liner.
Materials: A General Carbon Steel, A3, OCr13,1Cr13,0Cr18Ni9,1Cr18Ni9Ti , Cr25Ni20 SUS304
SUS316etc,.
Features of hex metal: protecting refractory materials ,corrosion and abrasion resistance, high
temperature stability.
Application:
As refractories, hex steel mesh has Flexibility, high strength and erosion resistant characteristics.
Hex steel mesh is an excellent choice of refractory linings in furnaces, reactors, cyclones, ducts
and flues. It is mainly used in power plant, cement plant, Steel, petroleum, chemical industry,
power generation and other large devices. The hex metal can largely improve the heat erosion and
abrasion resistance.
Hex mesh used for floors, hex mesh provides long term protection for armor applications in
industrial floors. Specifically: Loading docks, ramps, high traffic aisles for forklifts and trucks, hot
floors for foundry, forge and steel mills, refuse disposal plant floors and almost anywhere floors
are subject to severe impact and rolling loads will benefit with Hex mesh.
Since Hex Metal's flexibility allows it to be rolled, it easily conforms to circular shapes. It is ideal
for lining Ducts, Furnaces, Reactor Vessels, Cyclones, Flue Gas Lines and other high temperature
equipment of virtually any shape or configuration. Hex metal and flex metal refractory linings are
both flexible, mesh grating used in reinforcing linings, floors and any cement structures needing
added support.
Metal Hex Grid
Hex Metal Side View
Hex Metal Cells
Flex Hex Metal
Flex Metal Refractory Lining allows free form rolling to very small diameters
Hex metal refractory lining is a hexagonal cellular mesh grating specifically designed for
reinforcing both linings and flooring. It acts as a surface framework to hold cement or refractory
in position, and relieves stress in the lining's upper crust, which prevents spalling and cracking. As
a result of hex metal's strength and unique design, abrasion and corrosion are retarded and
refractory life is significantly extended. Even hot gaseous substances cannot erode the refractory
because they are reflected away from the surface by the metal cellular grid.
Since hex metal's flexibility allows it to be rolled, it easily conforms to circular shapes. It is ideal
for lining ducts, furnaces, reactor vessels, cyclones, flue gas lines and other high temperature
equipment of virtually any shape.
Hex metal and flex metal refractory linings are both flexible, mesh grating used in reinforcing
linings, floors and any cement structures needing added support.
Flex metal refractory lining is the direct counterpart of hex metal, it performs all the same
functions of reinforcement of thin wall refractory linings, while its design allows free form rolling
to very small diameters. Hex metal becomes impractical to use when the section of plant being
protected is of small diameter, the free rolling capabilities of flex metal allows plant as small as
150mm to lined. Typical applications include air distributors, fan cases and all plants where the
practicality of free rolling material is beneficial to maintenance activities.