Reflective Interrupter Version 1.5 SFH 9206...Version 1.5 SFH 9206 2015-12-22 9 Recommended Solder...

2015-12-22 1

2015-12-22

Reflective Interrupter

Version 1.5

SFH 9206

Ordering Information

Features:

• 940nm emitter in combination with a silicon NPN phototransistor

• Optimal operating distance 1 mm to 5 mm

• Daylight cut-off filter

• Emitter and detector electrically isolated

• Soldering Methode: IR Reflow Soldering

• Product complies to MSL Level 4

Applications

• Position reporting

• End position switch

• Speed monitoring and regulating

• Motion transmitter

Type: Collector-emitter current Ordering Code

IPCE [µA]

Kodak neutral white testcard with

90% reflection; IF = 10 mA, VCE = 5 V,

d = 1 mm

SFH 9206 160 ... 2000 Q65111A3179

SFH 9206-4 160 ... 320 -

SFH 9206-5/6 250 ... 800 Q65111A3177

SFH 9206-6/7 400 ... 1250 Q65111A3178

SFH 9206-8 1000 ... 2000 -

2015-12-22 2

Version 1.5 SFH 9206

Maximum Ratings (TA = 25 °C)

Characteristics (TA = 25 °C)

Parameter Symbol Values Unit

Emitter

Reverse voltage VR 5 V

Forward current IF 50 mA

Surge current

(tp ≤ 10 μs, D=0)

IFSM 0.7 A

Power consumption Ptot 100 mW

Thermal resistance junction - ambient 1) page 14 RthJA 495 K / W

Detector

Collector-emitter voltage VCE 16 V

Collector-emitter voltage

(t ≤ 2 min)

VCE 30 V

Emitter-collector voltage VEC 7 V

Collector current IC 10 mA

Total Power dissipation Ptot 100 mW

Thermal resistance junction - ambient 1) page 14 RthJA 495 K / W

Interrupter

Operating and storage temperature range Top; Tstg -40 ... 100 °C

Ambient temperature range TA -40 ... 100 °C

Total power dissipation Ptot 150 mW

Electrostatic discharge VESD 2 kV


Emitter

Peak wavelength

(IF = 50 mA, tp = 20 ms)

(typ) λpeak 950 nm

Forward voltage

(IF = 50 mA, tp = 20 ms)

(typ (max)) VF 1.45 (≤ 1.8) V

Reverse current

(VR = 5 V)

IR not designed for

reverse operation

µA

Detector


2015-12-22 3

Capacitance

(VCE = 0 V, f = 1 MHz, E = 0)

(typ) CCE 5 pF

Dark current

(VCE = 16 V, E = 0)

(typ (max)) ICE0 1 (≤ 50) nA

Photocurrent (ambient light sensitivity)

(VCE = 5 V, EV = 1000 lx)

(typ) IPCE 1 mA

Interrupter

Collector-emitter current

(Kodak neutral white testcard with 90% reflection;

IF = 10 mA, VCE = 5 V, d = 1 mm)

(min)

(typ)

(max)

IPCE

IPCE

IPCE

160

600

2000

µA

µA

µA

Collector-emitter saturation voltage

(Kodak neutral white testcard with 90% reflection; IF

= 10 mA, IC = 55 µA, d = 1 mm)

(typ (max)) VCEsat 200 (< 600) mV

Switching Times

Turn-on time 2) page 14

(VCC = 5 V, IC = 100 µA, RL = 1 kΩ)

(typ) ton 40 µs

Rise time 2) page 14

(VCC = 5 V, IC = 100 µA, RL = 1 kΩ)

(typ) tr 30 µs

Turn-off time 2) page 14

(VCC = 5 V, IC = 100 µA, RL = 1 kΩ)

(typ) toff 45 µs

Fall time 2) page 14

(VCC = 5 V, IC = 100 µA, RL = 1 kΩ)

(typ) tf 40 µs


2015-12-22 4


Mechanical test setup

Test Circuit for Switching and Response Time

OHM02257

d

Reflectorwith 90% reflexion(Kodak neutral whitetest card)

OHM02258

Ι FVCC

R L

Ι COutput


2015-12-22 5

Collector Current 3) page 14

IC / ICmax = f(d), TA = 25°CCollector Current 3) page 14

IC = f(IF), d = 1 mm, 90% reflection, TA = 25°C

Photocurrent 3) page 14

IC = f(VCE), d = 1 mm, 90% reflection, TA = 25°CRelative Spectral Emission 3) page 14

(typ) Irel = f(λ), TA = 25°C

0

OHF05610

IC max

d0

CI

20

40

60

80

%100

1 2 3 4 mm 5

Kodak neutralwhite test card

Mirror

70

50

30

10

OHF05611

CI

00

1

2

3

4

5

6

FI5 10 15 20 25 30 35 mA 50

mA

OHF05612

0210

CEV10101010-1 V

IC

0.5

1.0

1.5

2.0

2.5

mA

I = 15 mA

IF = 10 mA

= 5 mAFI

= 20 mA

= 25 mA

FI

IF

F

8000

nm

%

OHF04134

20

40

60

80

100

Irel

λ850 900 950 1025

2015-12-22 6


Forward Current 3) page 14

IF = f(VF), single pulse, tp = 100 µsMax. Permissible Forward Current

IF = f(TA)

Permissible Pulse Handling Capability

IF = f(tp), TA = 25 °C, duty cycle D = parameterPermissible Pulse Handling Capability

IF = f(tp), TA = 85 °C, duty cycle D = parameter

OHF03828

FI

10-4

0.5 1 1.5 2 2.5 V 3

100

A

0

FV

-110

5

5

10-2

-3

5

10

00

˚CT

IFmA

OHF05614

A

20 40 60 80 100

10

20

30

40

50

60

210-1-2-3-4-5 1010 1010 10tp

10 10s100

TtA

IF D = IP

T

F

PtOHF05615

10.5

0.01

0.050.10.2

0.02

0.005D =

0.05

0.10

0.15

0.20

0.25

0.30

0.35

0.40

0.45

0.50

0.55

0.60

0.75

210-1-2-3-4-5 1010 1010 10tp

10 10s100

TtA

IF D = IP

T

F

PtOHF05616

10.5

0.01

0.050.10.2

0.02

0.005D =

0.05

0.10

0.15

0.20

0.25

0.30

0.35

0.40

0.45

0.50

0.55

0.60

0.75


2015-12-22 7

Dark Current 3) page 14

ICEO = f(TA), VCE = 20 V, E = 0Collector-Emitter Capacitance 3) page 14

CCE = f(VCE), f = 1 MHz, E = 0, TA = 25°C

Relative Spectral Sensitivity 3) page 14

Srel = f(λ), TA = 25°CPhotocurrent 3) page 14

IPCE / IPCE(25°C) = f(TA), VCE = 5 V, If=10mA

T

OHF01530

A

CEOΙ

-110

10 0

10 1

10 2

10 3

-25

nA

0 25 50 75 100˚CV

OHF01528

CE

-210

CEC

10 -1 10 0 10 1 10 20

V

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

5.0

pF

OHF05686

-60 ˚C

AT

0

(25 ˚C)Ipce

Ipce

0.2

0.4

0.6

0.8

1.0

1.4

-40 -20 0 20 40 60 80 120

2015-12-22 8


Pinning

Package Outline

Dimensions in mm.

Pin Description

1 Anode

2 -

3 Emitter

4 Collector

5 -

6 Cathode

Package

Reflective Interrupter

Approximate Weight:

40.0 mg


2015-12-22 9

Recommended Solder Pad

Dimensions in mm (inch).

Reflow Soldering Profile

Product complies to MSL Level 4 acc. to JEDEC J-STD-020D.01

00

s

OHA04525

50

100

150

200

250

300

50 100 150 200 250 300

t

T

˚C

St

t

Pt

Tp240 ˚C

217 ˚C

245 ˚C

25 ˚C

L

2015-12-22 10


Taping

Dimensions in mm (inch).

OHA04612

Profile Feature

Profil-Charakteristik

Ramp-up rate to preheat*)

25 °C to 150 °C2 3 K/s

Time tS TSmin to TSmax

tS

tL

tP

TL

TP

100 12060

10 20 30

80 100

217

2 3

245 260

3 6

Time25 °C to TP

Time within 5 °C of the specified peaktemperature TP - 5 K

Ramp-down rate*TP to 100 °C

All temperatures refer to the center of the package, measured on the top of the component

* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range

Ramp-up rate to peak*)

TSmax to TP

Liquidus temperature

Peak temperature

Time above liquidus temperature

Symbol

Symbol

Unit

Einheit

Pb-Free (SnAgCu) Assembly

Minimum MaximumRecommendation

K/s

K/s

s

s

s

s

°C

°C

480


2015-12-22 11

Tape dimensions [mm]Tape dimensions in mm

Reel dimensions [mm]Reel dimensions in mm

Barcode-Product-Label (BPL)

Tape and Reel

12 mm tape with 1000 pcs. on ∅ 180 mm reel

W P0 P1 P2 D0 E F

12 + 0.3 / - 0.1 4 ± 0.1 4 ± 0.1

or

8 ± 0.1

2 ± 0.05 1.5 ± 0.1 1.75 ± 0.1 5.5 ± 0.05

A W Nmin W1 W2max

180 12 60 12.4 + 2 18.4

D0

2P

P0

1P

WFE

Direction of unreeling

N

W1

2W

A

OHAY0324

Label

Leader:Trailer:

13.0

Direction of unreeling

±0.2

5

min. 160 mm *

min. 400 mm *

*) Dimensions acc. to IEC 60286-3; EIA 481-D

OHA04563

(G) GROUP:

1234567890(1T) LOT NO: (9D) D/C: 1234

(X) PROD NO: 123456789

(6P) BATCH NO: 1234567890

LX XXXX

RoHS Compliant

BIN1: XX-XX-X-XXX-X

MLX

Temp STXXX °C X

Pack: RXX

DEMY XXX

X_X123_1234.1234 X

9999(Q)QTY:

SemiconductorsOSRAM Opto

XX-XX-X-X

EXAMPLE

X_X123_1234.1234 XX_X123_1234.1234 X

EXAMPLE

EXAMPLE

EXAMPLE

XXXXXX

X_X123_1234.1234 XX_X123_1234.1234 X

XX-XX-X-XXX-XX-X-X

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

XXXXXX

X_X123_1234.1234 XX_X123_1234.1234 X

XX-XX-X-XXX-XX-X-X

EXAMPLE

Pack: RXX

XXX

X_X123_1234.1234 XX_X123_1234.1234 X

XX-XX-X-X

EXAMPLE

Pack: RXXPack: RXX

DEMY DEMY

EXAMPLE

12341234

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

(9D) D/C:(9D) D/C: 12341234

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

1234

EXAMPLE

Pack: RXXPack: RXX

DEMY

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

(9D) D/C:(9D) D/C:

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

(9D) D/C:(9D) D/C: 1234

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

(9D) D/C:

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

12345678901234567890EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

(6P) BATCH NO:(6P) BATCH NO: 12345678901234567890

SemiconductorsSemiconductors

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

EXAMPLE

(6P) BATCH NO:(6P) BATCH NO: 12345678901234567890EXAMPLE

SemiconductorsSemiconductorsOSRAM OptoOSRAM Opto

EXAMPLE

EXAMPLE

1234567890

X_X123_1234.1234 X

Pack: RXX

DEMY

X_X123_1234.1234 X

(9D) D/C: 1234(9D) D/C:

1234567890(6P) BATCH NO: 1234567890

OSRAM Opto

XXX

X_X123_1234.1234 X

XX-XX-X-X

Pack: RXX

DEMY

Semiconductors

2015-12-22 12


Dry Packing Process and Materials

Note:

Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.

Regarding dry pack you will find further information in the internet. Here you will also find the normative

references like JEDEC.

Transportation Packing and Materials

Dimensions of transportation box in mm

Width Length Height

195 ± 5 195 ± 5 30 ± 5

OHA00539

OSRAM

Moisture-sensitive label or print

Barcode label

Desiccant

Humidity indicator

Barcode label

OSRAM

Please check the HIC immidiately afterbag opening.

Discard if circles overrun.Avoid metal contact.

WET

Do not eat.

Comparatorcheck dot

parts still adequately dry.

examine units, if necessary

examine units, if necessary

5%

15%

10%bake units

bake units

If wet,

change desiccant

If wet,

Humidity IndicatorMIL-I-8835

If wet,

Mois

ture

Level 3

Flo

or tim

e 168 H

ours

Mois

ture

Level 6

Flo

or tim

e 6

Hours

a) H

umid

ity In

dicato

r C

ard is

> 1

0% w

hen read a

t 23 ˚

C ±

5 ˚C

, or

reflo

w, v

apor-phase r

eflow

, or equiv

alent p

rocessin

g (peak p

ackage

2. Afte

r th

is b

ag is o

pened, devic

es that w

ill b

e subje

cted to

infrare

d

1. Shelf

life in

seale

d bag: 2

4 month

s at <

40 ˚

C a

nd < 9

0% rela

tive h

umid

ity (R

H).

Mois

ture

Level 5

a

at facto

ry c

onditions o

f

(if b

lank, s

eal date

is id

entical w

ith d

ate c

ode).

a) M

ounted w

ithin

b) S

tore

d at

body tem

p.

3. Devic

es require

bakin

g, befo

re m

ounting, i

f:

Bag s

eal date

Mois

ture

Level 1

Mois

ture

Level 2

Mois

ture

Level 2

a4. If b

aking is

require

d,

b) 2a o

r 2b is

not m

et.

Date

and ti

me o

pened:

refe

rence IP

C/J

ED

EC

J-S

TD

-033 fo

r bake p

rocedure

.

Flo

or tim

e see b

elow

If bla

nk, see b

ar code la

bel

Flo

or tim

e > 1

Year

Flo

or tim

e 1

Year

Flo

or tim

e 4

Weeks10%

RH

.

_<

Mois

ture

Level 4

Mois

ture

Level 5

˚C).

OPTO

SEM

ICO

NDUCTORS

MO

ISTURE S

ENSITIV

E

This b

ag conta

ins

CAUTION

Flo

or tim

e 72 H

ours

Flo

or tim

e 48 H

ours

Flo

or tim

e 24 H

ours

30 ˚C

/60%

RH

.

_<

LE

VE

L

If bla

nk, see

bar code la

bel

OHA02044

PACKVAR:

R077Additional TEXT

P-1+Q-1

Multi TOPLED

Muste

r

OSRAM Opto

Semiconductors

(6P) BATCH NO:

(X) PROD NO:

10

(9D) D/C:

11(1T) LOT NO:

210021998

123GH1234

024 5

(Q)QTY: 2000

0144

(G) GROUP:

260 C RT240 C R

3

220 C R

MLBin3:Bin2: Q

-1-20

Bin1: P-1-20

LSY T6762

2a

Temp ST

R18DEMY

PACKVAR:

R077Additional TEXT

P-1+Q-1

Multi TOPLED

Muste

r

OSRAM Opto

Semiconductors

(6P) BATCH NO:

(X) PROD NO:

10

(9D) D/C:

11(1T) LOT NO:

210021998

123GH1234

024 5

(Q)QTY: 2000

0144

(G) GROUP:

260 C RT240 C R

3

220 C R

MLBin3:Bin2: Q

-1-20

Bin1: P-1-20

LSY T6762

2a

Temp ST

R18DEMY

OSRAM

Packing

Sealing label

Barcode label

Mois

ture

Level 3

Flo

or tim

e 168 H

ours

Mois

ture

Level 6

Flo

or tim

e 6

Hours

a) H

umid

ity In

dicato

r C

ard is

> 1

0% w

hen read a

t 23 ˚

C ±

5 ˚C

, or

reflo

w, v

apor-phase r

eflow

, or equiv

alent p

rocessin

g (peak p

ackage

2. Afte

r th

is b

ag is o

pened, devic

es that w

ill b

e subje

cted to

infrare

d

1. Shelf

life in

seale

d bag: 2

4 month

s at <

40 ˚

C a

nd < 9

0% rela

tive h

umid

ity (R

H).

Mois

ture

Level 5

a

at facto

ry c

onditions o

f

(if b

lank, s

eal date

is id

entical w

ith d

ate c

ode).

a) M

ounted w

ithin

b) S

tore

d at

body tem

p.

3. Devic

es require

bakin

g, befo

re m

ounting, i

f:

Bag s

eal date

Mois

ture

Level 1

Mois

ture

Level 2

Mois

ture

Level 2

a4. If b

aking is

require

d,

b) 2a o

r 2b is

not m

et.

Date

and ti

me o

pened:

refe

rence IP

C/J

ED

EC

J-S

TD

-033 fo

r bake p

rocedure

.

Flo

or tim

e see b

elow

If bla

nk, see b

ar code la

bel

Flo

or tim

e > 1

Year

Flo

or tim

e 1

Year

Flo

or tim

e 4

Weeks10%

RH

.

_<

Mois

ture

Level 4

Mois

ture

Level 5

˚C).

OPTO

SEM

ICO

NDUCTORS

MO

ISTURE S

ENSITIV

E

This b

ag conta

ins

CAUTION

Flo

or tim

e 72 H

ours

Flo

or tim

e 48 H

ours

Flo

or tim

e 24 H

ours

30 ˚C

/60%

RH

.

_<

LE

VE

L

If bla

nk, see

bar code la

bel

Barcode label


2015-12-22 13

Disclaimer

Language english will prevail in case of any discrepancies or deviations between the two language wordings.

Attention please!

The information describes the type of component and shall not be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances.

For information on the types in question please contact our Sales Organization.

If printed or downloaded, please find the latest version in the Internet.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any

costs incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose!

Critical components* may only be used in life-support devices** or systems with the express written approval of

OSRAM OS.

*) A critical component is a component used in a life-support device or system whose failure can reasonably be

expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that

device or system.

**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or

maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be

endangered.

2015-12-22 14


Glossary

1) Thermal resistance: Mounting on PC-board with > 5 mm2 pad size

2) IC as a function of the forward current of the emitting diode, the degree of reflection and the distance between

reflector and component (d)

3) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or

calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily

correspond to the actual parameters of each single product, which could differ from the typical data and calculated

correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data

will be changed without any further notice.

Reflective Interrupter Version 1.5 SFH 9206...Version 1.5 SFH 9206 2015-12-22 9 Recommended Solder...

Documents

Transcript of Reflective Interrupter Version 1.5 SFH 9206...Version 1.5 SFH 9206 2015-12-22 9 Recommended Solder...