Thermal Deformation Analysis of Automotive Disc Brake Squeal
References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P.,...
Transcript of References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P.,...
![Page 1: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/1.jpg)
References
186
References
ABAQUS Manual Version 6.4, Hibbit, Karlsson & Sorensen, Inc., 2003.
Abendroth, H. and Wernitz, B., “The integrated test concept dyno-vehicle;
performance and noise”, S.A.E Technical Paper 2000-01-2774, 2000.
Akay, A., “Acoustics of friction”, J. Acoust. Soc. Am., Vol. 111, No. 4, pp. 1525-
1548, 2002.
Archard, J. F., “Contact and rubbing of flat surfaces”, Journal of Applied Physics,
Vol. 24, No. 8, pp. 981-988, 1953.
Auweraer, H. V., Hendricx, W., Garesci, F. and Pezzutto, A., “Experimental and
numerical modelling of friction induced noise in disc brakes”, S.A.E. Technical
Paper 2002-01-1192, 2002.
Baba, H., Wada, T. and Takagi, T., “Study on reduction of brake squeal caused by
in-plane vibration on rotor”, S.A.E. Technical Paper 2001-01-3158, 2001.
Bae, J. C. and Wicket, J. A., “Free vibration of coupled disk-hat structures”, Journal
of Sound and Vibration, Vol. 235, No. 1, pp. 117-132, 2000.
Baillet, L., Linck, V., D’Errico, S., Laulagnet, B. and Berthier, Y., “Finite element
simulation of dynamic instabilities in frictional sliding contact”, Journal of
Tribology, Vol. 127, No. 3, pp. 652-657, 2005.
Bajer, A., Belsky, V. and Kung, S., “The influence of friction-induced damping and
nonlinear effects on brake squeal analysis”, S.A.E. Technical Paper 2004-01-2794,
2004.
Bajer, A., Belsky, V. and Zeng, L. J., “Combining a nonlinear static analysis and
complex eigenvalue extraction in brake squeal simulation”, S.A.E Technical Paper
2003-01-3349, 2003.
![Page 2: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/2.jpg)
References
187
Berger, E. J., “Friction modelling for dynamic system simulation”, Applied
Mechanics Reviews, Vol. 55, No. 6, pp. 535-577, 2002.
Bergman, F., Eriksson, M. and Jacobson, S., “The effect of reduced contact area on
the occurrence of disc brake squeals for an automotive brake pad”, Proc. Instn.
Mech. Engrs, Vol. 214, Part D, pp. 561-568, 2000.
Blaschke, P., Tan, M. and Wang, A., “On the analysis of brake squeal propensity
using finite element method”, S.A.E. Technical Paper 2000-01-2765, 2000.
Brooks, P. C., Crolla, D. A., Lang, A. M. and Schafer, D. R., “Eigenvalue sensitivity
analysis applied to disc brake squeal”, IMechE, C444/004/93, pp. 135-143, 1993
Chan, S. N., “ Analysis of disks with friction loading”, PhD Thesis, Department of
Engineering, University of Liverpool, December 1993.
Chargin, M. L., Dunne, L. W. and Herting, D. N., “Nonlinear dynamics of brake
squeal”, Finite Elements in Analysis and Design, Vol. 28, pp. 69-82, 1997.
Chen, F., AbdelHamid, M. K., Blaschke, P. and Swayze, J., “On automotive disc
brake squeal Part III: Test and evaluation”, S.A.E. Technical Paper 2003-01-1622,
2003a.
Chen, F., Tan, C. A. and Quaglia, R. L., “On automotive disc brake squeal Part I:
Mechanisms and causes”, S.A.E. Technical Paper 2003-01-0683, 2003b.
Chen, F., Tong, H., Chen, S. E. and Quaglia, R. L., “On automotive disc brake squeal
Part IV: Reduction and prevention”, S.A.E. Technical Paper 2003-01-3345, 2003c.
Chen, G., Zhou, Z., Kapsa, P. and Vincent, L., “Effect of surface topography on
formation of squeal under reciprocating sliding”, Wear, Vol. 253, pp. 411-423, 2002.
![Page 3: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/3.jpg)
References
188
Chowdhary, H. V., Bajaj, A. K. and Krousgril, C. M., “An analytical approach to
model disc brake system for squeal prediction”, Proceedings of Design Engineering
Technical Conference, DETC2001/VIB-21560, pp. 1-10, September 2001.
Chung, C. and Donley, M., “Mode coupling phenomenon of brake squeal dynamics”,
S.A.E. Technical Paper 2003-01-1624, 2003.
Chung, C., Steed, W., Dong, J., Kim, B. S. and Ryu, G. S., “Virtual design of brake
squeal”, S.A.E. Technical Paper 2003-01-1625, 2003.
Chung, C., Steed, W., Kobayashi, K. and Nakata, H., “A new analysis method for
brake squeal Part 1: Theory for modal domain formulation and stability analysis”,
S.A.E. Technical Paper 2001-01-1600, 2001.
Crolla, D. A. and Lang, A. M., “Brake noise and vibration – The state of the art”,
Vehicle Tribology Leeds-Lyon Tribology Series, No. 18, pp. 165-174, 1991.
Cunefare, K. A. and Graf, A. J., “Experimental active control of automotive disc
brake rotor squeal using dither”, Journal of Sound and Vibration, Vol. 250, No. 4,
pp. 579-590, 2002.
D’souza, A. F. and Dweib, A. H., “Self-excited vibrations induced by dry friction
Part I: Experimental study”, Journal of Sound and Vibration, Vol. 137, No. 2, pp.
163-175, 1990a.
D’souza, A. F. and Dweib, A. H., “Self-excited vibrations induced by dry friction
Part II: Stability and limit cycle analysis”, Journal of Sound and Vibration, Vol. 137,
No. 2, pp. 177-190, 1990b.
Dessouki, O., Drake, G., Lowe, B. and Chang, W. K., “Disc brake squeal: Diagnosis
and prevention”, S.A.E. Technical Paper 2003-01-1618, 2003.
Dom, S., Riefe, M. and Shi, T. S., “Brake squeal noise testing and analysis
correlation”, S.A.E. Technical Paper 2003-01-1616, 2003.
![Page 4: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/4.jpg)
References
189
Dunlap, K. B., Riehle, M. A. and Longhouse, R. E., “An investigation overview of
automotive disc brake noise”, S.A.E. Technical Paper 1999-01-0142, 1999.
Earles, S. W. E. and Soar, G. B., “Squeal noise in disc brakes”, IMechE, C101/71,
pp. 61-69, 1971.
El-Butch, A. M. and Ibrahim, I. M., “Modelling and analysis of geometrically
induced vibration in disc brakes considering contact parameters”, S.A.E. Technical
Paper 1999-01-0143, 1999.
Eriksson, M. and Jacobson, S., “Friction behaviour and squeal generation of disc
brakes at low speeds”, Proc. Instn. Mech. Engrs, Vol. 215, Part D, pp. 1245-1256,
2001.
Eriksson, M., “Friction and contact phenomenon of disc brakes related to squeal”,
PhD Thesis, Faculty of Science and Technology, Uppsala University, 2000.
Eriksson, M., Bergman, F. And Jacobson, S., “Surface characterization of brake pads
after running under silent and squealing conditions”, Wear, Vol. 232, No. 2, pp. 163-
167, 1999.
Ewins, D. J., “Modal testing: theory and practice”, Research Studies Press,
Letchworth, 1984.
Fieldhouse, J. D. and Newcomb, P., “The application of holographic interferometry
to the study of disc brake noise”, S.A.E. Technical Paper 930805, 1993.
Fieldhouse, J. D. and Newcomb, T. P., “An investigation into disc brake noise using
holographic interferometry”, IMechE, C427/11/213, 1991.
Fieldhouse, J. D., “A study of the interface pressure distribution between pad and
rotor, the coefficient of friction and calliper mounting geometry with regard to brake
![Page 5: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/5.jpg)
References
190
noise”, Proc. of IMechE International Conference on Brakes 2000 Automotive
Braking, Professional Engineering Publishing Ltd, pp. 3-18, 2000.
Fieldhouse, J. D., Steel, W. P., Talbot, C. J. And Siddiqui, M. A., “Brake noise
reduction using rotor asymmetric”, Proc. of IMechE International Conference-
Braking 2004, Professional Engineering Publishing Ltd, pp. 209-222, 2004.
Flint, J. and Hulten, J., “Lining-deformation-induced modal coupling as squeal
generator in a distributed parameter disc brake model”, Journal of Sound and
Vibration, Vol. 254, No. 1, pp. 1-21, 2002.
Fosberry, R. A. C. and Holubecki, Z., “An investigation of the cause and nature of
brake squeal”, M.I.R.A. Technical Report, No. 1955/2, 1955.
Fosberry, R. A. C. and Holubecki, Z., “Disc brake squeal: Its mechanism and
suppression ”, M.I.R.A. Technical Report, No. 1961/2, 1961.
Ghesquiere, H. and Castel, L., “High frequency vibrational coupling between an
automobile brake-disc and pads”, IMechE, C427/11/021, 1991.
Goto, Y., Amago, T., Chiku, K., Matsushima, T. And Ishihara, T., “Experimental
identification method for interface contact stiffness of FE model for brake squeal”,
Proceedings of IMechE International Conference- Braking 2004, Professional
Engineering Publishing Ltd, pp. 143-155, 2004.
Guan, D. and Huang, J., “The method of feed-in energy on disc brake squeal”,
Journal of Sound and Vibration, Vol. 261, No. 2, pp. 297-307, 2003.
Guan, D. and Jiang, D., “A study on disc brake squeal using finite element methods”,
S.A.E. Technical Paper 980597, 1998.
Hamzeh, O. N., Tworzydlo, W. W., Chang, H. J. and Fryska, S. T., “Analysis of
friction-induced instabilities in a simplified aircraft brake”, S.A.E. Technical Paper
1999-01-3404, 1999.
![Page 6: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/6.jpg)
References
191
Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of
the damping material”, Proc. of IMechE Int. Conf. on Auto. Brakes – Braking 2002 ,
Professional Engineering Publishing Ltd, 2002.
Hoffmann, N. and Gaul, L., “Effects of damping on mode-coupling instability in
friction induced oscillations”, ZAMM Z. Angew. Math. Mech., Vol. 83, No. 8, pp.
524-534, 2003.
Hoffmann, N., Fischer, M., Allgaier, R. and Gaul, L., “A minimal model for studying
properties of the mode-coupling type instability in friction induced oscillations”,
Mechanics Research Communications, Vol. 29, pp. 197-205, 2002.
Hoffmann, N., Wagner, N. and Gaul, L., “Quenching mode-coupling friction-
induced instability using high-frequency dither”, Journal of Sound and Vibration,
Vol. 279, Nos. 1/ 2, pp. 471-180, 2005.
Hohmann, C., Schiffner, K. And Brecht, J., “Pad wear simulation”, S.A.E. Technical
Paper 1999-01-3392, 1999.
Hohmann, C., Schiffner, K., Oerter, K. and Reese, H., “Contact analysis for drum
brakes and disk brakes using ADINA”, Computers and Structures, Vol. 72, pp. 185-
198, 1999.
Hu, Y. and Nagy, L. I., “Brake squeal analysis by using nonlinear transient finite
element method”, S.A.E. Technical Paper 971510, 1997.
Hu, Y., Mahajan, S. and Zhang, K., “Brake squeal DOE using nonlinear transient
analysis”, S.A.E. Technical Paper 1999-01-1738, 1999.
Ibrahim, R. A., “Friction-induced vibration, chatter, squeal and chaos Part II:
Dynamics and modelling”, Appl. Mech. Rev., Vol. 47, No. 7, pp 227-249, 1994.
![Page 7: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/7.jpg)
References
192
Ibrahim, R. A., Madhavan, S., Qiao, S. L. and Chang, W. K., “Experimental
investigation of friction-induced noise in disc brake system”, Int. J. of Vehicle
Design, Vol. 23, Nos. 3/4, pp. 218-240, 2000.
Ichiba, Y. and Nagasawa, Y., “Experimental study on disc brake squeal”, S.A.E.
Technical Paper 930802, 1993.
Ioannidis, P., Barton, D. C. and Brooks, P. C., “Noise and vibration characterisation
of cast iron and siliconised carbon composite brake rotors”, S.A.E. Technical Paper
2005-01-2313, 2005.
Ioannidis, P., Brooks, P. C. and Barton, D. C., “Drum brake contact analysis and its
influence on squeal prediction”, S.A.E. Technical Paper 2003-01-3348, 2003.
Ishihara, N., Nishiwaki, M. and Shimizu, H., “Experimental analysis of low-
frequency brake squeal noise”, S.A.E. Technical Paper 962128, 1996.
James, S., “An experimental study of disc brake squeal”, PhD Thesis, Department of
Engineering, University of Liverpool, May 2003.
Jang, H., Ko, K., Kim, S. J., Basch, R. H. and Fash, J. W., “The effect of metal fibers
on the friction performance of automotive brake friction materials”, Wear, Vol. 256,
pp. 406-414, 2004.
Jibki, T., Shima, M., Akita, H. and Tamura, M., “A basic study of friction noise
caused by fretting”, Wear, Vol. 251, pp. 1492-1503, 2001.
Kido, I., Kurahachi, T. and Asai, M., “A study on low-frequency brake squeal
noise”, S.A.E. Technical Paper 960993, 1996.
Kim, N. M., Won, D., Burris, D., Holtkamp, B., Gessel, G. R., Swanson, P. and
Sawyer, W. G., “Finite element analysis and experiments of metal/metal wear in
oscillatory contacts”, Wear, Vol. 258, Nos. 11-12, pp. 1787-1793, 2005.
![Page 8: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/8.jpg)
References
193
Kinkaid, N. M., O’Reilly, O. M. and Papadopolous, P., “Review of automotive disc
brake squeal”, Journal of Sound and Vibration, Vol. 267, pp. 105-166, 2003.
Kumamoto, F., Kawai, K. and Baba, H., “A study on relationship between pad
restraint condition and brake squeal generation“, S.A.E. Technical Paper 2004-01-
2801, 2004.
Kung, S., Dunlap, K. B. and Ballinger, R. S., “Complex eigenvalue analysis for
reducing low frequency brake squeal”, S.A.E. Technical Paper 2000-01-0444, 2000.
Kung, S., Steizer, G., Belsky, V. and Bajer, A., “Brake squeal analysis incorporating
contact conditions and other nonlinear effects”, S.A.E. Technical Paper 2003-01-
3343, 2003.
Lang, A. M. and Smales, H., “An approach to the solution of disc brake vibration
problems”, IMechE, C37/83, 1983.
Lee, H. and Kikuchi, N., “Sensitivity analysis of complex eigensolutions for brake
noise”, S.A.E. Technical Paper 2003-01-1626, 2003.
Lee, Y. S., Brooks, P. C., Barton, D. C. and Crolla, D. A., “A study of disc brake
squeal propensity using a parametric finite element model”, IMechE, C521/009/98,
pp. 191-201, 1998.
Liles, G. D., “Analysis of disc brake squeal using finite element methods”, S.A.E.
Technical Paper 891150, 1989.
Limpert, R., “Brake design and safety”, 2nd
Edition, Society of Automotive Engineers,
Inc, Warrendale, 1999.
Liu, T., Rhee, S. K. and Lawson, K. L., “A study of wear rates and transfer films of
friction materials”, Wear, Vol. 68, No. 1, pp. 1-12, 1980.
![Page 9: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/9.jpg)
References
194
Liu, W. and Pfeifer, J., “Reducing high frequency disc brake squeal by pad shape
optimization”, S.A.E. Technical Paper 2000-01-0447, 2000.
Lou, G., Wu, T. W. and Bai, Z., “Disk brake squeal prediction using the ABLE
algorithm”, Journal of Sound and Vibration, Vol. 272, pp. 731-748, 2004.
Mahajan, S. K., Hu, Y. and Zhang, K., “Vehicle disc brake squeal simulations and
experiences”, S.A.E. Technical Paper 1999-01-1738, 1999.
Massi, F. and Baillet, L., “Numerical analysis of squeal instability”, International
Conference on Emerging Technologies of Noise and Vibration Analysis and Control,
NOVEM2005, pp. 1- 10, April 2005.
Matsuzaki, M. and Izumihara, T., “Brake noise caused by longitudinal vibration of
the disc rotor”, S.A.E. Technical Paper 930804, 1993.
McDaniel, J. G., Moore, J., Chen, S. and Clarke, C. L., “Acoustic radiation models of
brake systems from stationary LDV measurements”, Proceedings of International
Mechanical Engineering Congress and Exposition, IME99, pp. 1-8, November 1999.
McMillan, A. J., “A non-linear friction model for self-excited vibrations”, Journal of
Sound and Vibration, Vol. 205, No. 3, pp. 323-335, 1997.
Millner, N., “An analysis of disc brake squeal”, S.A.E. Technical Paper 780332,
1978.
Mills, H. R., “Brake squeak”, Institution of. Automobile Engineers, Technical Report
9000B, 1938.
Moirot, F. and Nguyen, Q. S., “Brake squeal: a problem of flutter instability of the
steady sliding solution?”, Arch. Mech., Vol. 52, Nos. 4-5, pp. 645-661, 2000.
Moirot, F., Nehme, A. and Nguyen, Q. S., “Numerical simulation to detect low-
frequency squeal propensity”, S.A.E. Technical Paper 2000-01-2767, 2000.
![Page 10: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/10.jpg)
References
195
Murakami, H., Tsunada, N. and Kitamura, T., “A study concerned with a mechanism
of disc brake squeal”, S.A.E. Technical Paper 841233, 1984.
Nack, W. V., “Brake squeal analysis by finite elements”, Int. J. of Vehicle Design,
Vol. 23, Nos. 3/4, pp. 263-275, 2000.
Nagy, L. I., Cheng, J. and Hu, Y., “A new method development to predict brake
squeal occurrence”, S.A.E. Technical Paper 942258, 1994.
Nakajima, T. and Okada, Y., “Study on reduction method of brake squeal”, S.A.E.
Technical Paper 973029, 1997.
Nishiwaki, M., “Generalised theory of brake noise”, IMechE Technical Paper, pp.
195-202, 1993.
Nishiwaki, M., Harada, H., Okamura, H. and Ikeuchi, T., “Study on disc brake
squeal”, S.A.E. Technical Paper 890864, 1989.
Nitta, I., “Measurements of real contact areas using PET films (thickness, 0.9µm)”,
Wear, Vols. 181-183, pp. 844-849, 1995.
North, M. R., “Disc brake squeal - a theoretical model”, Motor Industry Research
Association (MIRA) Research Report 1972/5, 1972.
North, M. R., “Disc brake squeal”, IMechE, C38/76, pp. 169-176, 1976.
Nossier, T. A., Said, M. A. R., ElNahas, N. S. and AbuElFetouh, G., “Significance of
squeal in disc brake design”, Int. J. of Vehicle Design, Vol. 19, No. 1, pp. 124-133,
1998.
Oldfield, M. J., “Harmonic excitation of bolted joints”, PhD thesis, Department of
Engineering, University of Liverpool, February 2004.
![Page 11: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/11.jpg)
References
196
Ouyang, H. and Mottershead, J. E., “Unstable travelling waves in the friction-
induced vibration of discs”, Journal of Sound and Vibration, Vol. 248, No. 4, pp.
768-779, 2001.
Ouyang, H., Cao, Q., Mottershead, J. E. and Treyde, T., “Vibration and squeal of a
disc brake: modelling and experimental results”, Proc. Instn. Mech. Engrs, Part D: J.
Automobile Engineering, Vol. 217, pp. 867-875, 2003a.
Ouyang, H., Chan, S. N., Mottershead, J. E., Friswell, M. I. And Cartmell, M. P.,
“Parametric vibrations in discs: point-wise and distributed loads, including rotating
friction”, ASME Design Engineering Technical Conference, Vol. 84-1, pp. 1125-
1133, 1995.
Ouyang, H., Mottershead, J. E. and Li, W., “A moving-load model for disc-brake
stability analysis”, Journal of Vibration and Acoustics, Vol. 125, No. 1, pp. 53-58,
2003b.
Ouyang, H., Mottershead, J. E., Brookfield, D. J., James, S. and Cartmell, M. P., “A
methodology for the determination of dynamic instabilities in a car disc brake”,
International Journal of Vehicle Design, Vol. 23, Nos. 3-4, pp. 241-262, 2000.
Ouyang, H., Mottershead, J. E., Cartmell, M. P. and Friswell, M. I., “Friction-
induced parametric resonances in discs: effect of a negative friction-velocity
relationship”, Journal of Sound and Vibration, Vol. 209, No. 2, pp. 251-264, 1998.
Ouyang, H., Nack, W. V., Yuan, Y. and Chen, F., “Numerical analysis of automotive
disc brake squeal: a review”, Int. J Vehicle Noise and Vibrations, Vol. 1, Nos. 3-4,
pp. 207-230, 2005.
Papinniemi, A., Lai, J. C. S., Zhao, J. and Loader, L., “Brake squeal: a literature
review”, Applied Acoustics, Vol. 63, pp. 391-400, 2002.
![Page 12: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/12.jpg)
References
197
Pau, M., Baldi, A., Orr, P. F., and Ginesu, F., “Experimental investigation on contact
between cylindrical conformal surfaces”, J. Strain Analysis, Vol. 39, No. 3, pp. 315-
328, 2004.
Podra, P. and Andersson, S., “Simulating sliding wear with finite element method”,
Tribology International, Vol. 32, pp. 71-81, 1999.
Popp, K. and Rudolph, M., “Brake squeal”, Final Report of a Joint Research Project,
pp. 197-225, Aachen, 2001.
Qiao, S. L. and Ibrahim, R. A., “Stochastic dynamics of systems with friction-
induced vibration”, Journal of Sound and Vibration, Vol. 223, No. 1, pp. 115-
140,1999.
Quinn, A. M., Drinkwater, B. W. and Dwyer-Joyce, R. S., “The measurement of
contact pressure in machine elements using ultrasound”, Ultrasonics, Vol. 39, pp.
495-502, 2002.
Reeves, M., Taylor, N., Edwards, C., Williams, D. and Buckberry, C. H., “A study of
brake disc modal behaviour during squeal generation using high-speed electronic
speckle pattern interferometry and near-field sound pressure measurements”, Proc.
Instn. Mech. Engrs, Part D, Vol. 214, pp. 285-295, 2000.
Rhee, R. K., Jacko, M. G. And Tsang, P. H. S., “Role of friction film in friction,
wear and noise of automotive brakes”, Wear, Vol. 146, No. 1, pp. 89-97, 1991.
Rhee, S. K., “Wear equation for polymers sliding against metal surfaces”, Wear, Vol.
16, pp. 431-445, 1970.
Richmond, J. W., Smith, A. C., Beckett, P. B. and Hodges, T., “The development of
an integrated experimental and theoretical approach to solving brake noise
problems”, Advances in Automotive Braking Technology, Design Analysis and
Material Developments, pp. 3-23, 1996.
![Page 13: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/13.jpg)
References
198
Ripin, Z. B. M., “Analysis of Disc Brake Squeal Using the Finite Element Method”,
PhD Thesis, Department of Mechanical Engineering, University of Leeds, 1995.
Rumold, W. and Swift, R. A., “Evaluation of disc brake pad pressure distribution by
multibody dynamic analysis”, Proc. of International Conference on Vehicle Brakes,
Ed. D Barton and B Shilton, Professional Engineering Publishing Ltd., Bury St
Edmund, UK, 2002.
Saka, H. and Wada, T., “Study of brake squeal- classification for vibration modes of
mounting bracket”, S.A.E. Technical Paper 2003-01-3344, 2003.
Samie, F. and Sheridan, D. C., “Contact analysis for a passenger car disc brake”,
S.A.E. Technical Paper 900005, 1990.
Sherif, H. A., “Effect of contact stiffness on the establishment of self-excited
vibrations”, Wear, Vol. 141, No. 2, pp. 227-234, 1991.
Sherif, H. A., “Investigation on effect of surface topography of pad/disc assembly on
squeal generation”, Wear, Vol. 257, Nos. 7-8, pp. 687-695, 2004.
Shi, T.S., Dessouki, O., Warzecha, T., Chang, W. K. and Jayasundera, A.,
“Advances in complex eigenvalue analysis for brake noise”, S.A.E. Technical Paper
2001-01-1603, 2001.
Shin, K., Brennan, M. J., Oh, J. E. and Harris, C. J., “Analysis of disc brake noise
using a two-degree-of-freedom model”, Journal of Sound and Vibration, Vol. 254,
No. 5, pp. 837-848, 2002.
Sinclair, D., “Frictional vibrations”, Journal of Applied Mechanics, pp. 207-214,
1955.
Singh, R., Sheikh, A. A. and Mitchell, M. J., “Viscoelastic damping to control disc
brake squeal”, Sound and Vibration: Noise and Vibration Control, Vol. 32. No. 10,
pp. 18-22, 1998.
![Page 14: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/14.jpg)
References
199
Sinou, J., Thouverez, F. and Jezequel, L., “Application of a nonlinear modal
instability approach to brake systems”, Journal of Vibration and Acoustics, Vol. 126,
pp. 101-107, 2004.
Soom, A., Dargush, G. F. and Serpe, C. I., “Understanding the effects of friction and
surface roughness on noise generation from elastic components in sliding contact”,
Proceedings of STLE/ASME Joint International Tribology Conference, 2003-TRIB-
261, pp. 1-3, 2003.
Spurr, R. T., “A Theory of Brake Squeal”, Proc. of the Automotive Division, Inst.
Mechanical Engineers, Vol. 1, pp. 33-40, 1961-1962.
Spurr, R. T., “Brake squeal”, IMechE, C95/71, pp. 13-16, 1971.
Steel, W. P., Fieldhouse, J. D., Talbot, C. J. and Crampton, A., “In-plane vibration
investigations of a noise brake”, Proc. of IMechE International Conference- Braking
2004, Professional Engineering Publishing Ltd, pp. 103-112, 2004.
Tamari, J., Doi, K. and Tamasho, T., “Prediction of contact pressure of disc brake
pad”, JSAE Review, Vol. 21, pp. 136-138, 2000.
Tarter, J. H., “Disc brake squeal”, S.A.E. Technical Paper 830530, 1983.
Tirovic, M. and Day, A. J., “Disc brake interface pressure distributions”, Proc. Instn.
Mech. Engrs, Vol. 205, pp. 137-146, 1991.
Travis, M. H., “Nonlinear transient analysis of aircraft landing gear brake whirl and
squeal”, ASME Design Engineering Technical Conference, DE-84-1, Vol. 3, Part A,
pp. 1209-1216, 1995.
Triches, M., Gerges, N. Y. and Jordan, R., “Reduction of squeal noise from disc
brake systems using constrained layer damping”, Journal of the Brazilian Society of
Mechanical Sciences and Technology, Vol. XXVI, No. 3, pp. 340-348, 2004.
![Page 15: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/15.jpg)
References
200
Tumbrink, H. J., “Measurement of load distribution on disc brake pads and
optimization of disc brakes using the ball pressure methods”, S.A.E. Technical Paper
890863, 1989.
Tworzydlo, T. T., Becker, E. B. and Oden, J. T., “Numerical modelling of friction-
induced vibrations and dynamic instabilities”, Appl. Mech. Rev., Vol. 47, No. 7, pp.
255-274, 1994.
Tworzydlo, W. W., Hamzeh, O. N., Zaton, W. and Judek, T. J., “Friction-induced
oscillations of a pin-on-disk slider: analytical and experimental studies”, Wear, Vol.
236, pp. 9-23, 1999.
Tzou, K. I., Wickert, J. A. and Akay, A., “In-plane vibration modes of arbitrary thick
disks”, Journal of Vibration and Acoustics, Vol. 120, pp. 384-391, 1998.
Vadari, V., Albright, M. and Edgar, D., “An introduction to brake noise
engineering”, Sound & Vibration, July 2001.
von Wagner, U., Hochlenert, D., Jearsiripongkul, T. and Hagedorn, P., “Active
control of brake squeal via smart pads”, S.A.E. Technical Paper 2004-01-2773, 2004.
von Wagner, U., Jearsiripongkul, T., Vomstein, T., Chakraborty, G. and Hagedorn,
P. Brake squeal: modeling and experiments. VDI-Report 1749, pp.173-186, 2003.
Watany, M., Abouel-Seoud, S., Saad, A. and Abdel-Gawad, I., “Brake squeal
generation”, S.A.E. Technical Paper 1999-01-1735, 1999.
Yamaguchi, K., Uchida, M. and Abraha, P., “Measurement of the pressure
distribution on contact surfaces by detection of a transferred oil film”, Surface
Sciences, Vols. 377-379, pp. 1015-1018, 1997.
Yang, M., Afaneh, A. H. and Blaschke, P., “A study of disc brake high frequency
squeals and disc in-plane/out-of-plane modes”, S.A.E. Technical Paper 2003-01-
1621, 2003.
![Page 16: References - Universiti Teknologi Malaysiaarahim/bibliography.pdf · References 191 Heppes, P., “Noise insulators for brake squeal reduction- influence and selection of the damping](https://reader033.fdocuments.in/reader033/viewer/2022050612/5fb35407a1b32c039255ac2b/html5/thumbnails/16.jpg)
References
201
Yang, S. and Gibson, R. F., “Brake vibration and noise: reviews, comments and
proposals”, Int. J. Mater. Product Tech., Vol. 12, Nos. 4-6, pp. 496-513, 1997.
Yuan, Y., “A study of the effects of negative friction-speed slope on brake squeal”,
ASME Design Engineering Technical Conference, DE-Vol. 84-1, Vol. 3, pp. 1153-
1162, 1995.
Yuan, Y., “An Eigenvalue analysis approach to brake squeal problems”, Proceedings
of the Dedicated Conference on Automotive Braking System, 29th
ISATA, June 1996.
Zhang, L., Wang, A., Mayer, M. and Blaschke, P., “Component contribution and
eigenvalue sensitivity analysis for brake squeal”, S.A.E. Technical Paper 2003-01-
3346, 2003.