147

REFERENCES

1. Abdulla, M. H. and Yusoff, A. N. “Frequency dependence of the

complex impedances and dielectric behaviour of some Mg-Zn ferrites”,

J. Mater. Sci., Vol. 32, pp. 5817-5823, 1997.

2. Aiping Chen, Guang Yang, Hua Long, Fang Li, Yuhua Li, Peixiang

Lu. “Nonlinear optical properties of laser deposited CuO thin films”,

Thin Solid Films, Vol. 15, pp. 4277-4280, 2009.

3. Ameer Azam, Faheem Ahmed, Nishat Arshi, Chaman, M., Naqvi, A.

H. “Formation and characterization of ZnO nanopowder synthesized

by sol–gel method”, J. Alloys Compd., Vol. 496, pp. 399-402, 2010.

4. Amit Kumar Chawla, Davinder Kaur and Ramesh Chandra. “Structural

and optical characterization of ZnO nanocrystalline films deposited by

sputtering”, Opt. Mater., Vol. 29, pp. 995-998, 2007.

5. Anie Roshan, S., Cyriac Joseph and Ittyachen, M. A. “Growth and

characterization of a new metal-organic crystal: potassium thiourea

bromide”, Mater. Lett., Vol. 49, pp. 299-302, 2001.

6. Arnold, M. S., Avouris, P., Pan, Z. W. and Wang, Z. L. “Field-effect

transistors based on single semiconducting oxide nanobelts”, J. Phys.

Chem. B, Vol. 107, pp. 659-663, 2003.

7. Arora, S. K., Vipul Patel, Brijesh Amin and Anjana Kothar. “Dielectric

behaviour of strontium tartrate single crystals”, Bull. Mater. Sci.,

Vol. 27, No. 2, pp. 141-147, 2004.

8. Ashour, A., El-Kadry, N. and Mahmoud, S.A. “On the electrical and

optical properties of CdS films thermally deposited by a modified

source”, Thin Solid Films, Vol. 269, pp. 117-120, 1995.

9. Audrey Frenot and Ioannis S. Chronakis. “Polymer nanofibers

assembled by electrospinning”, Curr. Opinion in Colloid and Interface

Sci.,Vol. 8, pp. 64-75, 2003.

10. Aussawasathien, D., Sahasithiwat, S. and Menbangpung, L.

“Electrospun camphorsulfonic acid doped poly(o-toluidine)–

polystyrene composite fibers: Chemical vapor sensing”, Synth.

Met., Vol. 158, pp. 259-263, 2008.

148

11. Austin, I. G. and Mott, N. F. “Polarons in crystalline and non-

crystalline materials”, Adv. Phys., Vol. 18, pp. 41-102, 1969.

12. Avinash Baji, Yiu-Wing Mai, Qian Li and Yun Liu. “Nanoscale

investigation of ferroelectric properties in electrospun barium

titanate/polyvinylidene fluoride composite fibers using piezoresponse

force microscopy”, Composites Sci. and Technol., Vol. 71, No. 11,

pp. 1435-1440, 2011.

13. Azizi, A. and Sadrnezhaad, S. K. “Synthesis of Fe–Ni nano-particles

by low-temperature hydrogen reduction of mechanically alloyed

Ni-ferrite”, J. Alloys Compd., Vol. 485, pp. 484-487, 2009.

14. Bai, X. D., Wang, E. G., Gao, P. X. and Wang, Z. L., “Dual-mode

mechanical resonance of individual ZnO nanobelts”, Appl. Phys. Lett.,

Vol. 82, pp. 4806-4808, 2003.

15. Balendu S. Jha, Raymond J. Colello, James R. Bowman, Scott A. Sell,

Kangmin D. Lee, John W. Bigbee, Gary L. Bowlin, Woon N. Chow,

Bruce E. Mathern and David G. Simpson, “Two pole air gap

electrospinning: Fabrication of highly aligned, three-dimensional

scaffolds for nerve reconstruction”, Acta Biomaterialia, Vol. 7,

pp. 203-215, 2011.

16. Barsoum, M. “Fundamentals of Ceramics”, Mc Graw-Hill, New York,

p. 543, 1977.

17. Baumgarten, P. K. “Electrostatic spinning of acrylic microfibers”,

J. Colloid Interface Sci., Vol. 36, pp. 71-79, 1971.

18. Bhuvaneswari, M. S., Bramnik, N. N., Ensling, D., Ehrenberg, H.,

Jaegermann, W. “Synthesis and characterization of Carbon Nano

Fiber/LiFePO4 composites for Li-ion batteries”, J. Power Sources,

Vol.180, pp. 553-560, 2008.

19. Bin Ding, Eiji Kimura, Tomokazu Sato, Shiro Fujita and Seimei

Shiratori. “Fabrication of blend biodegradable nanofibrous nonwoven

mats via multi-jet electrospinning”, Polymer, Vol. 45, pp. 1895-1902,

2004.

20. Bin Ding, Hak-Yong Kim, Se-Chul Lee,Chang-Lu Shao, Douk-Rae

Lee, Soo-Jin Park, Gyu-Beom Kwag. and Kyung-Ju Choi. “Preparation

and characterization of a nanoscale poly(vinyl alcohol) fiber aggregate

produced by an electrospinning method”, J. Polym. Sci. Part B: Polym.

Phys., Vol. 40, pp. 1261-1268, 2002.

149

21. Bin Ding, Jinho Kim, Yasuo Miyazaki and Seimei Shiratori.

“Electrospun nanofibrous membranes coated quartz crystal

microbalance as gas sensor for NH3 detection”, Sens. and Actuators B,

Vol. 101, pp. 373-380, 2004.

22. Boomadevi, S., Mittal, H. P. and Dhansekaran, R. “Synthesis, crystal

growth and characterization of 3-methyl 4-nitropyridine 1-oxide

(POM) single crystals”, J. Cryst. Growth, Vol. 261, pp. 55-62, 2004.

23. Capula Colindres, S., Vargas García, J. R., Toledo Antonio, J. A. and

Angeles Chavez C. “Preparation of platinum-iridium nanoparticles on

titania nanotubes by MOCVD and their catalytic evaluation”.

J. Alloys Compd.,Vol.483, pp. 406-409, 2009.

24. Chambers, S. A., Droubay, T. C., Wang, C. M., Rosso, K. M., Heald,

S. M., Schwartz, D.A., Kittilstved, K. R. and Gamelin, D. R.

“Ferromagnetism in oxide semiconductors”, Mater. Today, Vol. 9,

pp. 28-35, 2006.

25. Chan Kim, Sang-Hee Park, Wan-Jin Lee and Kap-Seung Yang.

“Characteristics of supercapacitor electrodes of PBI-based carbon

nanofiber web prepared by electrospinning”, Electrochimica Acta.,

Vol. 50, pp. 877-881, 2004.

26. Chan Kim, Yeong-Og Choi, Wan-Jin Lee and Kap-Seung Yang.

“Supercapacitor performances of activated carbon fiber webs prepared

by electrospinning of PMDA-ODA poly(amic acid) solutions”,

Electrochimica Acta., Vol. 50, pp. 883-887, 2004.

27. Chan Kim. “Electrochemical characterization of electrospun activated

carbon nanofibres as an electrode in supercapacitors”, J. Power

Sources, Vol. 142, pp. 382-388, 2005.

28. Chandra S. Sharma, Hari Katepalli, Ashutosh Sharma and Marc

Madou. “Fabrication and electrical conductivity of suspended carbon

nanofiber arrays”, Carbon, Vol. 49, No. 5, pp. 1727-1732, 2011.

29. Chang, Y. Q., Wang, P. W., Tang, R. H., Sun, Q. L. and Long, Y.,

“Synthesis and Room Temperature Ferromagnetism of Flower-shaped

Mn Doped ZnO Nanostructures”, J. Mater. Sci. Technol., Vol. 27,

No. 6, pp. 513-517, 2011.

30. Chemla, D. S. and Zyss, J. “Non-linear Optical Properties of Organic

Molecules and Crystals”, Vol. 1, Academic Press, London, 1987.

150

31. Christo Balarew and Rumen Duhlev. “Application of the hard and soft

acids and bases concept to explain ligand coordination in double salt

structures”, J. Solid State Chem., Vol. 55, pp. 1-6, 1984.

32. Christos C. Chamis. “Meso Mechanics for Fiber Reinforced

Composites with Nano Fiber Reinforced Matrix”, Procedia Eng.,

Vol. 01, pp. 43-46, 2009.

33. Chung-Hsin Lu, Baibaswata Bhattacharjee and Shih-Yen Chen.

“Microwave synthesis of manganese-ion-doped zinc sulfide

nano-phosphors using a novel monomer”. J. Alloys Compd., Vol. 475,

pp. 116-121, 2009.

34. Chunmei Ban, Natalya A. Chernova and Stanley Whittingham, M.

“Electrospun nano-vanadium pentoxide cathode”, Electrochemistry

Commun., Vol. 11, pp. 522-525, 2009.

35. Chunmei Li, Charu Vepari, Hyoung-Joon Jin, Hyeon Joo Kim and

David L. Kaplan. “Electrospun silk-BMP-2 scaffolds for bone tissue

engineering”, Biomater., Vol. 27, pp. 3115-3124, 2006.

36. Comini, E., Faglia, G., Sberveglieri, G., Pan, Z. W. and Wang, Z. L.

“Stable and highly sensitive gas sensors based on semiconducting

oxide nanobelts”, Appl. Phys. Lett., Vol. 81, pp.1869-1872, 2002.

37. Dalton, A. B., Collins, S., Mun˜ oz, E., Razal, J. M., Ebron, V. H.,

Ferraris, J. P., Coleman, J. N., Kim, B. G. and Baughman, R.H.

“Super-tough carbon-nanotube fibres”, Nature, Vol. 423, pp. 703-705,

2003.

38. Dana A. Schwartz, Nick S. Norberg, Quyen P. Nguyen, Jason M.

Parker and Daniel R. Gamelin. “Magnetic Quantum Dots: Synthesis,

Spectroscopy and Magnetism of Co2+

- and Ni2+

-Doped ZnO Nano

crystals”, J. Am. Chem. Soc., Vol. 125, No.43, pp.13205-13218, 2003.

39. Dar, M. A., Ahsanulhaq, Q., Kim, Y. S., Sohn, J. M., Kim, W. B. and

Shin, H. S. “Versatile synthesis of rectangular shaped nanobat-like

CuO nanostructures by hydrothermal method; structural properties and

growth mechanism”, Appl. Surf. Sci., Vol. 255, pp. 6279-6284, 2009.

40. de Leeuw, N. H. and Purton, J. A. “Density-functional theory

calculations of the interaction of protons and water with low-

coordinated surface sites of calcium oxide”, Phys. Rev. B, Vol. 63,

pp. 195417-195425, 2001.

151

41. Deitzel, J. M., Kleinmeyer, D., Hirvanen, J. K., Tan, N. C. B.

“Controlled deposition of electrospun poly(ethylene oxide) fibers”,

Polymer, Vol. 42, pp. 8163-8170, 2001.

42. Deitzel, J. M., Kleinmeyer, J., Harris, D. and Tan, N. C. B. “The effect

of processing variables on the morphology of electrospun nanofibers

and textiles”, Polymer, Vol. 42, pp. 261-272, 2001.

43. Deitzel, J. M., Kosik, W., McKnight, S. H., Tan, N. C. B.,

Desimone, J. M. and Crette, S. “Electrospinning of polymer nanofibers

with specific surface chemistry”, Polymer, Vol. 43, pp. 1025-1029,

2002.

44. Deka, S., Pasricha, R. and Joy, P. A. “Experimental comparison of the

structural, magnetic,electronic, and optical properties of ferromagnetic

and paramagnetic polycrystalline Zn xCoxO (x = 0, 0.05, 0.1)”, Phys.

Rev. B, Vol. 74, pp. 033201-033204, 2006.

45. Demir, M. M., Yilgor, I., Yilgor, E. and Erman, B. “Electrospinning of

polyurethane fibers”, Polymer, Vol. 43, pp. 3303-3309, 2002.

46. Deraz, N. M. “Size and crystallinity-dependent magnetic properties of

copper ferrite nano-particles”, J. Alloys Compd., Vol. 501,

pp. 317-325, 2010.

47. Deyi Wang, Jian Zhou and Guizhen Liu, “The microstructure and

photoluminescence of Cu-doped ZnO nano-crystal thin films prepared

by sol–gel method”. J. Alloys Compd., Vol. 487, pp. 545-549, 2009.

48. Dietl, T. “Ferromagnetic semiconductors”, Semicond. Sci. Technol.,

Vol. 17, pp. 377-392, 2002.

49. Dietl, T., Ohno, H. and Matsukura, F. “Hole-mediated ferromagnetism

in tetrahedrally coordinated semiconductors”, Phys. Rev. B, Vol. 63,

pp. 195205-195209, 2001.

50. Dietl, T., Ohno, H., Matsukura, F., Cibert, J. and Ferrand, D. “Zener

Model Description of Ferromagnetism in Zinc-Blende Magnetic

Semiconductors”, Science, Vol. 287, pp.1019-1022, 2000.

51. Dinesha, M. L., Jayanna, H. S., Mohanty, S. and Ravi, S. “Structural,

electrical and magnetic properties of Co and Fe co-doped ZnO

nanoparticles prepared by solution combustion method”, J. Alloys

Compd., Vol. 490, pp. 618-623, 2010.

152

52. Doshi, J. and Reneker, D. H. “Electrospinning process and

applications of electrospun fibers”, J. Electrost., Vol. 35, pp. 151-160,

1995.

53. Duvail, J. L., Re´tho, P., Garreau, S., Louarn, G., Godon, C. and

Demoustier-Champagne, S. “Transport and vibrational properties of

poly(3,4-ethylenedioxythiophene) nanofibers”, Synth. Metals,

Vol. 131, pp. 123-128, 2002.

54. Escobar, M., Giuliani, L., Candal, R. J., Lamas, D. G., Caso, A.,

Rubiolo, G., Grondona, D., Goyanes, S. and Márquez, A. “Carbon

nanotubes and nanofibers synthesized by CVD on nickel coatings

deposited with a vacuum arc”, J. Alloys Compd., Vol. 495,

pp. 446-449, 2010.

55. Eun Ju Ra, Kay Hyeok An, Ki Kang Kim, Seung Yol Jeong and Young

Hee Lee. “Anisotropic electrical conductivity of MWCNT/PAN

nanofiber paper”, Chem. Phys. Letters, Vol. 413, pp. 188-193, 2005.

56. Everett E. Carpenter, Charles J. O’Connor and Vincent G. Harris.

“Atomic structure and magnetic properties of MnFe2O4 nanoparticles

produced by reverse micelle synthesis”, J. Appl. Phys., Vol. 85,

pp. 5175 -5177, 1999.

57. Fahrettin Yakuphanoglu. “Electrical and photovoltaic properties of

cobalt doped zinc oxide nanofiber/n-silicon diode”, J. Alloys Compd.,

Vol. 494, pp. 451-455, 2010.

58. Farghali, A. A., Moussa, M. and Khedr, M. H. “Synthesis and

characterization of novel conductive and magnetic nano-composites”,

J. Alloys Compd., Vol. 499, pp. 98-103, 2010.

59. Feng, J. J. “Stretching of a straight electrically charged viscoelastic

jet”, J. Non-Newtonian Fluid Mech., Vol. 116, pp. 55-70, 2003.

60. Feng, L., Li, S., Li, H., Zhai, J., Song, Y., Jiang, L. and Zhu, D.

“Super-Hydrophobic Surface of Aligned Polyacrylonitrile Nanofibers”,

Angew Chem Int Ed., Vol. 41, No. 7, pp. 1221-1223, 2002.

61. Fong, H. and Reneker, D. H. “Electrospinning and formation of

nanofibers”, In: Salem DR, editor. Structure formation in polymeric

fibers. Munich: Hanser, pp. 225-246, 2001.

62. Fong, H., Chun, I. and Reneker, D. H. “Beaded nanofibers formed

during electrospinning”, Polymer, Vol. 40, No. 16, pp. 4585-4592,

1999.

153

63. Formhals A. US patent 1, 975, 504, 1934.

64. Formhals A. US patent 2, 160, 962, 1939.

65. Formhals A. US patent, 2, 187, 306, 1940.

66. Formhals A. US patent, 2, 323, 025, 1943.

67. Formhals A. US patent, 2, 349, 950, 1944.

68. Furukawa, T., Takahashi, Y. and Nakajima T. “Recent advances

in ferroelectric polymer thin films for memory applications”, Current

Applied Physics, Vol. 10, No. 1, pp. e62-e67, 2010.

69. Fuzhan Song, Xiangqian Shen, Mingquan Liu and Jun Xiang.

“Formation and characterization of magnetic barium ferrite hollow

fibers with high specific surface area via sol–gel process”, Solid State

Sci., Vol. 12, No. 9, pp. 1603-1607, 2010.

70. Gu, S. Y., Ren, J. and Vancso. G. J., “Process optimization and

empirical modeling for electrospun polyacrylonitrile (PAN) nanofiber

precursor of carbon nanofibers”, European Polym. Journal, Vol. 41,

pp. 2559-2568, 2005.

71. Gui-Ping MA, Dong-Zhi Yang, Bin-ling Chen, Shu-Min Ding,

Guo-Qiang Song, Jun Nie. “Preparation and characterization of

composite fibers from organic-soluble chitosan and

poly-vinylpyrrolidone by electrospinning”, Front. Mater. Sci. China,

Vol. 4, No. 1, pp. 64–69, 2010.

72. Hailiang Wang and Limin Qi. “Controlled Synthesis of Ag2S, Ag2Se,

and Ag Nanofibers by using a General Sacrificial Template and their

Application in Electronic Device Fabrication”, Adv. Funct. Mater.,

Vol. 18, pp. 1249-1256, 2008.

73. He, X., Zhang, Y. Q. and Zhang, Z. D. “Magnetic and Electrical

Behavior of MnTe xSbx Alloys”, J. Mater. Sci. Technol., Vol. 27,

No. 1, pp. 64-68, 2011.

74. Heidi L. Schreuder-Gibson and Phil Gibson, “Cooperative Charging

Effects of Fibers from Electrospinning of Electrically Dissimilar

Polymers”, International Nonwovens Journal, Vol. 13, No. 4,

pp. 39-45, 2005.

75. Hendricks Jr., C. D., Carson, R. S., Hogan, J. J. and Schneider, J. M.

“Photomicrography of electrically sprayed heavy particles”, AIAA, J.,

Vol. 2, No. 4, 733-737, 1964.

154

76. Hessien, M. M. and Khedr, M. H. “Catalytic activity and

magnetic properties of barium hexaferrite prepared from barite ore”,

Materials Research Bulletin, Vol. 42, No. 7, pp. 1242-1250, 2007.

77. Hewitt, T. D., Gao, R. and Roy, D. “Effects of surface charge on the

second harmonic generation from a Cu electrode, Surf. Sci., Vol. 291,

No. 1-2, pp. 233-241, 1993.

78. Hohman, M. M., Shin, M., Rutledge, G. and Brenner, M. P.

“Electrospinning and electrically forced jets I: stability theory”, Phys.

Fluids, Vol. 13, No. 8, pp. 2201-2220, 2001.

79. Hohman, M. M., Shin, M., Rutledge, G. and Brenner, M. P.

“Electrospinning and electrically forced jets II: Applications”, Phys.

Fluids, Vol. 13, pp. 2221-2236, 2001.

80. Hongyu Guan, Changlu Shao, Bin Chen, Jian Gong and Xinghua

Yang. “A novel method for making CuO superfine fibres via an

electrospinning technique”, Inorg. Chem. Commun., Vol. 6, No. 11,

pp. 1409-1411, 2003.

81. Hongyu Guan, Changlu Shao, Shangbin Wen, Bin Chen, Jian Gong

and Xinghua Yang. “Preparation and characterization of NiO

nanofibres via an electrospinning technique”, Inorg. Chem. Commun.,

Vol. 6, pp. 1302-1303, 2003.

82. Hualin Wang, Wenjuan Wang, Suwei Jiang, Shaotong Jiang, Linfeng

Zhai and Qin Jiang. “Poly(vinyl alcohol)/Oxidized Starch Fibres via

Electrospinning Technique: Fabrication and Characterization”, Iranian

Polym. Journal, Vol. 20, No. 7, pp. 551-558, 2011.

83. Huang, J. C. A., Hsu, H. S., Sun, J. H., Chiu, S. L., Lee, C. H., Liao, Y.

F. and Chou, H. “Study of the local environment diversity between

Co- and Mn-doped ZnO single crystal film by multilayer growth

technique”, J. Appl. Phy., Vol.103, pp. 07 D128-131, 2008.

84. Huges, W. and Wang, Z. L. “Nanobelts as nanocantilevers”, Appl.

Phys. Lett. ,Vol. 82, pp. 2886-2888, 2003.

85. Hussain, M., Mazhar, M., Hussain, T. and Khan, N. A. “High

Efficiency ZnO Nano Sensor, Fabrication and Characterization”,

J. Iran. Chem. Soc., Vol. 7, pp. S59-S69, 2010.

155

86. Ian D. Norris, Manal M. Shaker , Frank K. Ko and Alan G.

MacDiarmid. “Electrostatic fabrication of ultrafine conducting fibers:

polyaniline / polyethylene oxide blends”, Synth. Metals, Vol. 114,

pp. 109-114, 2000.

87. Idrish Miah, M. “Nano-confined and copper defect in wide-band gap

semiconductors”, Opt. Commun., Vol. 284, No. 21, pp. 5199-5202,

2011.

88. Indulal, C. R. and Raveendran, R. “Synthesis,characterization and

dielectric studies of cerium phospho iodate and cadmium doped cerium

phospho iodate in nano form”, Indian J. Pure and Appl. Phys.,

Vol. 48, pp. 121-126, 2010.

89. Ioannis S. Chronakis, Sven Grapenson and Alexandra Jakob.

“Conductive polypyrrole nanofibers via electrospinning:Electrical and

morphological properties”, Polymer, Vol. 47, No. 5, pp. 1597-1603,

2006.

90. Ioannis S. Chronakis. “Novel nanocomposites and nanoceramics based

on polymer nanofibers using electrospinning process - A review”,

J. Mater. Process. Technol., Vol. 167, pp. 283-293, 2005.

91. Islam M. R. and Podder, J. “Optical properties of ZnO nano fiber thin

films grown by spray pyrolysis of zinc acetate precursor”, Cryst. Res.

Technol., Vol. 44, No. 3, pp. 286-292, 2009.

92. Jason Lyons, Christopher Li and Frank Ko, “Melt-electrospinning part

I: Processing Parameters and Geometric Properties”, Polymer, Vol. 45,

pp. 7597-7603, 2004.

93. Jayakumar, O. D., Salunke, H. G., Kadam, R. M., Manoj Mohapatra,

Yaswant, G. and Kulshreshtha, S. K. “Magnetism in Mn-doped ZnO

nanoparticles prepared by a co-precipitation method”,

Nanotechnology, Vol. 17, pp. 1278-1285, 2006.

94. Jeerapong Watthanaarun, Varong Pavarajarn and Pitt Supaphol.

“Titanium (IV) oxide nanofibers by combined sol–gel and

electrospinning techniques: preliminary report on effects of preparation

conditions and secondary metal dopant”, Sci. and Technol. of Adv.

Mater., Vol. 6, pp. 240-245, 2005.

95. Jeong Rae Kim, Sung Won Choi, Seong Mu J., Wha Seop Lee and

Byung Chul Kim. “Electrospun PVdF-based fibrous polymer

electrolytes for lithium ion polymer batteries”, Electrochimica Acta.,

Vol. 50, pp. 69-75, 2004.

156

96. Jeppe C. Dyre. “The random free-energy barrier model for ac

conduction in disordered solids”, J. Appl. Phys., Vol. 64 , No. 5,

pp. 2456-2468, 1988.

97. Jesse T. McCann, Manuel Marquez, and Younan Xia. “Melt Coaxial

Electrospinning: A Versatile Method for the Encapsulation of Solid

Materials and Fabrication of Phase Change Nanofibers”, Nanoletters,

Vol. 6, No. 12, 2868-2872, 2006.

98. Jian Li, En-hui Liu, Wen Li, Xiang-yun Meng and Song-ting Tan.

“Nickel/carbon nanofibers composite electrodes as supercapacitors

prepared by electrospinning”, J. Alloys Compd., Vol. 478,

pp. 371-374, 2009.

99. Jianguo Zhao, Changwen Jia, Huigao Duan, Hui Li and Erqing Xie.

“Structural properties and photoluminescence of TiO2 nanofibers were

fabricated by electrospinning”, J. Alloys Compd., Vol. 461,

pp. 447-450, 2008.

100. Ji-Huan He and Yu-Qin Wan. “Allometric scaling for voltage and

current in electrospinning”, Polymer, Vol. 45, pp. 6731-6734, 2004.

101. Ji-Huan He, Hong-Mei Liu. “Variational approach to nonlinear

problems and a review on mathematical model of electrospinning”,

Nonlinear Analysis, Vol. 63, pp. e919-e929, 2005.

102. Ji-Huan He, Yue Wu and Wei-Wei Zuo. “Critical length of straight jet

in electrospinning”, Polymer, Vol. 46, pp. 12637-12640, 2005.

103. Ji-Huan He, Yu-Qin Wan, Jian-Yong Yu. “Application of Vibration

Technology to Polymer Electrospinning”, International Journal of

Nonlinear Sciences and Numerical Simulation, Vol. 5, No. 3,

pp. 253-262, 2004.

104. Jonscher, A. K. “The 'universal' dielectric response”, Nature, Vol. 267,

pp. 673-679, 1977.

105. Junhan Yuh, Juan C. Nino and Wolfgang M. Sigmund. “Synthesis of

barium titanate (BaTiO3) nanofibers via electrospinning”, Mater.

Letters, Vol. 59, No. 28, pp. 3645-3647, 2005.

106. Junwu Zhu, Haiqun Chen, Hongbo Liu, Xujie Yang, Lude Lu and

Xin Wang. “Needle-shaped nanocrystalline CuO prepared by liquid

hydrolysis of Cu(OAc)2”, Mater. Sci. and Eng.: A, Vol. 384, No. 1-2,

pp. 172-176, 2004.

157

107. Kankate, L., Balzer, F. Niehus, H., Rubahn, H.-G. “Organic

nanofibers from thiophene oligomers”, Thin Solid Films, Vol. 518,

pp. 130-137, 2009.

108. Kim, S. H., Lee, J. S., Choi, H. C., and Lee, Y. H. “The fabrication of

thin-film bulk acoustic wave resonators employing a ZnO/Si composite

diaphragm structure using porous silicon layer etching”, IEEE Electron

Dev. Lett., Vol. 20, pp. 113-115, 1999.

109. Kittilstved, K. R. and Gamelin, D. R. “Activation of High-TC

Ferromagnetism in Mn2+

-Doped ZnO using Amines”, J. Am. Chem.

Soc., Vol. 127, pp. 5292-5293, 2005.

110. Koski, Yim, K. and Shivkumar, S. “Effect of molecular weight on

fibrous PVA produced by electrospinning”, Mater. Letters, Vol. 58,

pp. 493-497, 2004.

111. Kulkarni, D. and Wachs, I. E. “Isopropanol oxidation by pure metal

oxide catalysts: Number of active surface sites and turnover

frequencies”, Appl. Catal. A, Vol. 237, pp. 121-137, 2002.

112. Kulyk, B., Sahraoui, B., Figà, V., Turko, B., Rudyk, V. and

Kapustianyk, V. “Influence of Ag, Cu dopants on the second and third

harmonic response of ZnO films”, J. Alloys Compd, Vol. 481,

No. 1-2, pp. 819-825, 2009.

113. Kurtz, S. K. and Perry, T. T. “A Powder Technique for the

Evaluation of Nonlinear Optical Materials”, J. Appl. Phys., Vol. 39,

pp. 3798-4013, 1968.

114. Kwon, I. K., Kidoaki, S. and Matsuda, T. “Electrospun nano- to

microfiber fabrics made of biodegradable copolyesters: structural

characteristics, mechanical properties and cell adhesion potential”,

Biomater., Vol. 26, pp. 3929-3939, 2005.

115. Kwon, Y. J., Kim, K. H., Lim, C. S. and Shim, K. B.

“Characterization of ZnO nanopowders synthesized by the

polymerized complex method via an organochemical route”,

J. Ceram. Process Res., Vol. 3, pp. 146-149, 2002.

116. Lee, K. H., Kim, H. Y., Bang, H. J., Jung, Y. H. and Lee, S. G. “The

change of bead morphology formed on electrospun polystyrene fibers”,

Polymer, Vol. 44, pp. 4029-4034, 2003.

158

117. Lee, K. H., Kim, H. Y., Khil, M. S., Ra, Y. M. and Lee, D. R.

“Characterization of nano-structured poly( -caprolactone) nonwoven

mats via electrospinning”, Polymer, Vol. 44, pp. 1287-1294, 2003.

118. Lei Li. and You-Lo Hsieh. “Ultra-fine polyelectrolyte fibers from

electrospinning of poly(acrylic acid)”, Polymer, Vol. 46,

pp. 5133-5139, 2005.

119. Li, P. G., Lei, M., Tang, W. H., Guo, X. and Wang, X. “Facile route to

straight SnO2 nanowires and their optical properties”, J. Alloys

Compd., Vol. 477, pp. 515-518, 2009.

120. Li-Dong Zhao, Bo-Ping Zhang, Jing-Feng Li, Min Zhou, Wei-Shu Liu

and Jing Liu. “Thermoelectric and mechanical properties of nano-

SiC-dispersed Bi2Te3 fabricated by mechanical alloying and spark

plasma sintering”, J. Alloys Compd., Vol. 455, pp. 259-264, 2008.

121. Ling Liu, Yaomin Zhao, Nengqin Jia, Qin Zhou, Chongjun Zhao,

Manming Yan and Zhiyu Jiang. “Electrochemical fabrication and

electronic behavior of polypyrrole nano-fiber array devices”, Thin

Solid Films, Vol. 503, pp. 241-245, 2006.

122. Lin-Jer Chen , Jiunn-Der Liao, Yu-Ju Chuang and Yaw-Shyan Fu,

“Polyvinylbutyral assisted synthesis and characterization of

chalcopyrite quaternary semiconductor Cu(InxGa1_x)Se2 nanofibers by

electrospinning route”, Polymer, Vol. 52, pp. 116-121, 2011.

123. Liu, G. J., Ding, J. F., Qiao, L. J., Guo, A., Dymov, B. P.,

Gleeson, J. T., Hashimoto, T. and Saijo. K. “Polystyrene-block-poly

(2-cinnamoylethyl methacrylate) nanofibers-Preparation,

characterization, and liquid crystalline properties”, Chem-A European

J., Vol. 5, pp. 2740-2749, 1999.

124. Lord Rayleigh, “On the equilibrium of liquid conducting masses

charged with electricity”, Philos. Mag., Vol. 14, pp.184-186,1882.

125. Ma, P. X. and Zhang, R. “Synthetic nano-scale fibrous extracellular

matrix”, J. Biomed. Mat. Res., Vol. 46, pp. 60-72, 1999.

126. Mahajan, R. P., Patankar, K. K., Kothale, M. B. and Patil, S. A.

“Conductivity, dielectric behaviour and magnetoelectric effect in

copper ferrite–barium titanate composites”, Bull. Mater. Sci., Vol. 23,

No. 4, pp. 273-279, 2000.

159

127. Manjula G. Nair, Nirmala, M., Rekha, K. and Anukaliani A.

“Structural, optical, photo catalytic and antibacterial activity of ZnO

and Co doped ZnO nanoparticles”, Mater. Letters, Vol. 65, Issue

12, pp. 1797-1800, 2011.

128. Manoj K. Gupta and Binay Kumar. “Enhanced ferroelectric, dielectric

and optical behavior in Li-doped ZnO nanorods”, J. Alloys

Compd, Vol. 509, No. 23, pp. L208-L212, 2011.

129. Manoj K. Gupta, Nidhi Sinha, Singh, B. K. and Binay Kumar.

“Synthesis of K-doped p-type ZnO nanorods along (100)

for ferroelectric and dielectric applications”, Mater. Letters, Vol. 6,

No. 16, pp. 1825-1828, 2010.

130. Martin, C. R., “Membrane-based synthesis of nanomaterials”, Chem.

Mater., Vol. 8, pp. 1739-1746, 1996.

131. Martin, L. W., Chu, Y.-H. and Ramesh, R. “Advances in the growth

and characterization of magnetic, ferroelectric, and multiferroic oxide

thin films”, Mater. Sci. and Engineering: R: Reports, Vol. 68,

No. 4-6, pp. 89-133, 2010.

132. Mathe, V. L., Patankar, K. K., Lotke, S. D., Joshi, P. B. and Patil, S.A.

“Structural, dielectric and transport properties of Pb(Mn0.5W0. 5)O3”,

Bull. Mater. Sci., Vol. 25, No. 4, pp. 347–350, 2002.

133. Medvedkin. G. A., Ishibashi, T., Nishi, T., Hayata, K., Hasegawa,Y.

and Sato. K. “Room Temperature Ferromagnetism in Novel Diluted

Magnetic Semiconductor Cd1-xMnxGeP2”, Japan. J. Appl. Phys.,

Vol. 39, pp. L949-L951, 2000.

134. Mekprasart, W., Jarernboon, W., Pecharapa, W., “TiO2/CuPc hybrid

nanocomposites prepared by low-energy ball milling for dye-sensitized

solar cell application”, Mater. Sci. Eng. B, Vol. 172, pp. 231-236,

2010.

135. Minedys Mac ´as, Ann Chacko, John P. Ferraris and Kenneth J. Balkus

Jr. “Electrospun mesoporous metal oxide fibers”, Microporous and

Mesoporous Materials, Vol. 86, pp. 1-13, 2005.

136. Ming Yin and Stephen O’Brien. “Synthesis of Monodisperse

Nanocrystals of Manganese Oxides”, J. Am. Chem. Soc., Vol. 125,

pp. 10180-10181, 2003.

160

137. Min-Hua Zhao, Zhong-Lin Wang and Scott X. Mao, “Piezoelectric

Characterization of Individual Zinc Oxide Nanobelt Probed by

Piezoresponse Force Microscope”, Nano Letters, Vol. 4, No. 4,

pp. 587-590, 2004.

138. Min-Kang Seo and Soo-Jin Park. “Electrochemical characteristics of

activated carbon nanofiber electrodes for supercapacitors”, Mater. Sci.

Eng. B, Vol. 164, pp. 106-111, 2009.

139. Mit-uppatham, C., Nithitanakul, M. and Supaphol, P. “Ultrafine

electrospun polyamide-6 fibers: effect of solution condition on

morphology and average fiber diameter”, Macromolecular Chem. and

Phys., Vol. 205, pp. 2327-2338, 2004.

140. Mo Chi-Mei, Zhang Lide and Wang Guozhong. “Characteristics of

dielectric behavior in nanostructured materials”, Nanostructured

Mater., Vol. 6, pp. 823-826, 1995.

141. Mohammad Amin Alavi and Ali Morsali. “Ultrasonic-assisted

synthesis of Ca(OH)2 and CaO nanostructures”, J. of Experimental

Nanosci., Vol. 5, No. 2, pp. 93-105, 2010.

142. Moumita Ghosh, Kanishka Biswas, Sundaresan. A. and Rao, C. N. R.

“MnO and NiO nanoparticles: Synthesis and magnetic properties”,

J. Mater. Chem., Vol. 16, pp. 106-111, 2006.

143. Nataraj, S. K., Yang, K. S., Aminabhavi, T. M. “Polyacrylonitrile-

based nanofibers—A state-of-the-art review”, Progress in Polym. Sci.,

doi:10.1016/j.progpolymsci. 2011.07.001, 2011.

144. Nick S. Norberg, Kevin R. Kittilstved, James E. Amonette, Ravi K.

Kukkadapu, Dana A. Schwartz and Daniel R. Gamelin. “Synthesis of

Colloidal Mn2+:ZnO Quantum Dots and High-TC Ferromagnetic

Nanocrystalline Thin Films”, J. Am. Chem. Soc., Vol. 126, No. 30,

pp. 9387-9398, 2004.

145. Nikodem Tomczak, Shuying Gu, Mingyong Han, Niek F. van Hulst.

and Julius Vancso, G. “Single light emitters in electrospun polymer

nanofibers: Effect of local confinement on radiative decay”, European

Polym. Journal, Vol. 42, pp. 2205-2210, 2006.

146. Ning Wang, Jie Ding, Guicun Li, and Hongrui Peng . “Synthesis and

properties of PbGeO3 nanostructures”, Cryst. Res. Technol., Vol. 45,

pp. 316-320, 2010.

161

147. Nisha. J. Tharayil, Raveendran, R., Alexander Varghese Vaidyan and

Chithra, P. G. “Optical, electrical and structural studies of nickel-cobalt

oxide nanoparticles”, Indian J. Eng. Mater. Sci., Vol. 15, pp. 489-496,

2008.

148. Nishio, Y. and Manley, R. S. J. “Cellulose-poly(vinyl alcohol) blends

prepared from solutions”, Macromol., Vol. 21, pp. 1270-1277, 1988.

149. Noh Soo Han, Hyeong Seop Shim, Seung Min Park, and Jae Kyu

Song. “Second-harmonic Generation and Multiphoton Induced

Photoluminescence in ZnO”, Bull. Korean Chem. Soc., Vol. 30,

No. 10, 2199-2200, 2009.

150. Norton, D. P., Pearton, S. J., Hebard, A. F., Theodoropoulou, N.,

Boatner, L.A. and Wilson, R. G., “Ferromagnetism in Mn-implanted

ZnO:Sn single crystals”, Appl. Phys. Lett., Vol. 82, pp. 239-242, 2003.

151. Ohno, Y., Young, D. K., Beshoten, B. Matsukura, F., Ohno, H. and

Awschalom, D. I. “Electrical spin injection in a ferromagnetic

semiconductor heterostructures”, Nature, Vol. 402, pp. 790-792, 1999.

152. Ondarcuhu T. and Joachim C. “Drawing a single nanofibre over

hundreds of microns”, Europhys Lett., Vol. 42, No. 2, pp. 215-220,

1998.

153. Padyath, R., Seth, J. and Babu, S.V. “Deposition of copper oxide films

by reactive laser ablation of copper formate in an r.f. oxygen plasma

ambient”, Thin Solid Films, Vol. 239, pp. 8-15, 1994.

154. Pan, Z. W., Dai, Z. R. and Wang, Z. L., “Nanobelts of semiconducting

oxides”, Science, Vol. 291, pp. 1947-1949, 2001.

155. Park, W. H., Jeong, L., Yoo, D. I. and Hudson, S. “Effect of chitosan

on morphology and conformation of electrospun silk fibroin fibers”,

Polymer, Vol. 45, pp. 7151- 7157, 2004.

156. Parveen Kumar, Sangeeta Singh, Juneja, J. K., Chandra Prakash,

Raina, K. K. “Ferroelectric properties of substituted Barium titanate

ceramics”, Physica B: Condensed Matter, Vol. 404, No.12-13,

pp. 1752-1756, 2009.

157. Paul D. Dalton, Doris Klee, Martin Mo¨ller. “Electrospinning with dual

collection rings”, Polymer, Vol. 46, pp. 611-614, 2005.

162

158. Pearton, S. J., Abernathy, C. R., Overberg, M. E., Thaler, G. T.,

Norton, D. P., Theodoropoulou, N., Hebard A.F., Park Y.D., Ren F.,

Kim. J., and Boatner. L.A. “Wide band gap ferromagnetic

semiconductors and oxides”, J. Appl. Phys., Vol. 93, pp. 1-13, 2003.

159. Peter Barber, Shiva Balasubramanian, Yogesh Anguchamy, Shushan

Gong, Arief Wibowo, Hongsheng Gao, Harry J. Ploehn and

Hans-Conrad zur Loye. “Polymer Composite and Nanocomposite”,

Dielectric Materials for Pulse Power Energy Storage Mater., Vol. 2,

pp. 1697-1733, 2009.

160. Pinto, N. J., Carrión, P. and Quiñones, J. X. “Electroless deposition of

nickel on electrospun fibers of 2-acrylamido-2-methyl-1-

propanesulfonic acid doped polyaniline”, Mater. Sci. and Eng. A,

Vol. 366, pp. 1-5, 2004.

161. Pratibha Singh, Sangeeta Singh, Juneja, J. K., Chandra Prakash, Raina,

K. K., Vinod Kumar and Pant, R. P. “Synthesis and ferroelectric

properties of La-substituted PZFNT”, Physica B, Vol. 405, pp.10-14,

2010.

162. Presmanes, L., Capdeville, S., Bonningue, C., Datas, L. and Tailhades,

Ph. “Magnetic and semi-conducting nano-composite films of spinel

ferrite and cubic zinc oxide”, Thin Solid Films, Vol. 515,

pp. 6676-6681, 2007.

163. Promsong, L. and Sriyudthsak, M. “Thin tin-oxide film alcohol-gas

sensor”, Sens. Actuators B, Chem., Vol. 25, pp. 504-506, 1995.

164. Qing-Ming Wang, and Cross, L. E. “Analysis of High Temperature

Reduction Processing of RAINBOW Actuator”, Mater. Chem. and

Phys., Vol. 58, No. 1, pp. 20-25, 1999.

165. Reneker, D. H. and Chun, I. “Nanometre diameter Fibres of Polymer

Produced by Electrospinning”, Nanotechnol., Vol. 7, pp. 216-223,

1996.

166. Roberto Ed. Schmid, “Nanoparticles: From Theory to Application”,

Gu¨nter Schmid, editor , Weinheim: Wiley-VCH ; pp. 199-230, 2004.

167. Robinette E. J. and Palmese G. R. “Synthesis of polymer–polymer

nanocomposites using radiation grafting techniques”, Nuclear

Instruments and Methods in Physics Research B, Vol. 236,

pp. 216-222, 2005.

163

168. Ronald F. Gibson. “A review of recent research on mechanics of

multifunctional composite materials and structures”, Compos. Struct.,

Vol. 92, No. 12, pp. 2793-2810, 2010.

169. Rouhollah Jalili, Seyed Abdolkarim Hosseini. and Mohammad

Morshed. “The Effects of Operating Parameters on the Morphology of

Electrospun Polyacrilonitrile Nanofibres”, Iran. Polym. Journal,

Vol. 14, No. 12, pp. 1074-1081, 2005.

170. Royal Kessick, John Fenn and Gary Tepper. “The use of AC potentials

in electrospraying and electrospinning processes”, Polymer, Vol. 45,

pp. 2981-2984, 2004.

171. Ruilai Liu, Huiyan Ye, Xiaopeng Xiong and Haiqing Liu. “Fabrication

of TiO2/ZnO composite nanofibers by electrospinning and their

photocatalytic property”, Mater. Chem. Phys., Vol. 121, pp. 432-439,

2010.

172. Ruilai Liu, Yingxing Huang, Aihua Xiao and Haiqing Liu.

“Preparation and photocatalytic property of mesoporous

ZnO/SnO2 composite nanofibers”. J. Alloys Compd., Vol. 503,

pp. 103-110, 2010.

173. Ruirui Yang, Jihuan He, Lan Xu and Jianyong Yu. “Bubble-

electrospinning for fabricating nanofibers”, Polymer, Vol. 50,

pp. 5846-5850, 2009.

174. Rutledge, S. L., Shaw, H. C., Benavides, J. B., Yowell, L. L., Chen,

Q., Jacobs, B. W., Song, S. P. and Ayres V. M. “Self assembly and

correlated properties of electrospun carbon nanofibers”, Diamond and

Related Mater., Vol. 15, No. 4-8, pp. 1070-1074, 2006.

175. Sachiko Sukigara, Milind Gandhi, Jonathan Ayutsede, Michael

Micklus. and Frank Ko. “Regeneration of Bombyx mori silk by

electrospinning—part 1: Processing parameters and geometric

properties”, Polymer, Vol. 44, pp. 5721-5727, 2003.

176. Sajeev, U. S., Anoop Anand, K., Deepthy Menon and Shanthi Nair.

“Control of nanostructures in PVA, PVA/chitosan blends and PCL

through electrospinning”, Bull. Mater. Sci., Vol. 31, No. 3,

pp. 343-351, 2008.

177. Sang Mo Yang, Jong-Gul Yoon and Tae Won Noh. “Nanoscale studies

of defect-mediated polarization switching dynamics in ferroelectric

thin film capacitors”, Curr. Appl. Phys., Vol. 11, No. 5,

pp. 1111-1125, 2011.

164

178. Sanyo M. Mathew, Shubhangi B. Umbarkar and Mohan K. Dongare.

“NOx storage behavior of BaO in different structural environment in

NSR catalysts”, Catalysis Commun., Vol. 8, pp. 1178-1182, 2007.

179. Sasanka Deka and Joy, P. A. “Synthesis and magnetic properties of

Mn doped ZnO nanowires”, Solid State Commun., Vol. 142, No. 4,

pp. 190-194, 2007.

180. Sato, K. and Yoshida, H. K. “First principles materials design for

semiconductor spintronics”, Semicond. Sci. Technol., Vol. 17,

pp. 367-376, 2002.

181. Satoru Kidoaki, Il Kuen Kwon and Takehisa Matsuda. “Mesoscopic

spatial designs of nano- and microfiber meshes for tissue-engineering

matrix and scaffold based on newly devised multilayering and mixing

electrospinning techniques”, Biomater., Vol. 26, pp. 37-46, 2005.

182. Seung-Wook Baek, Jihoon Jeong, Yu-Mi Kim, Jung Hyun Kim,

Sungmin Shin and Joongmyeon Bae. “Metal-supported solid oxide

fuel cells with barium-containing in-situ cathodes”, Solid State

Ionics, Vol. 192, No. 1, pp. 387-393, 2011.

183. Shah M.A. Baten, Alan G. Taylor and Paul Wilde C. “A second

harmonic generation study of the oxidation of copper electrodes”,

Electrochemistry Commun., Vol. 9, No.9, pp. 2393-2396, 2007.

184. Shanker, R. “Crystallization of acicular platelet particles of W-type

hexagonal strontium ferrite for magnetic recording applications”, J.

Mater Sci., Vol. 25, pp. 2465-2470, 1990.

185. Shibata, T., Unno, K., Makino, E., Ito, Y. and Shimada, S.

“Characterization of sputtered ZnO thin film as sensor and actuator for

diamond AFM probe”, Sens. Actuators A: Physical, Vol. 102,

pp. 106-113, 2002.

186. Shun Hua Xiao, Wei Fen Jiang, Kun Luo, Jin Hong Xia, Lin Zhang.

“Structure and ferroelectric properties of barium titanate films

synthesized by sol–gel method”, Mater. Chem. and Phys.,

Vol. 127, No. 3, pp. 420-425, 2011.

187. Siddheswaran, R., Sankar, R., Ramesh Babu, M., Rathnakumari, M.,

Jayavel, R., Murugakoothan, P. and Sureshkumar, P. “Preparation and

characterization of ZnO nanofibers by electrospinning”, Cryst. Res.

Technol., Vol. 41, pp. 446-449, 2006.

165

188. Son, W. K., Youk, J. H., Lee, T. S. and Park, W. H. “The effects of

solution properties and polyelectrolyte on electrospinning of ultrafine

poly(ethylene oxide) fibers”, Polymer, Vol. 45, pp. 2959-2966, 2004.

189. Song, Y. P., Wang, P. W., Zhang, X. H. and Yu, D. P. “Retracted:

Ferromagnetic GaMnN nanowires with Tc above room temperature”,

Physica B .,Vol. 368 , pp. 16-24, 2005.

190. Soon-Ki Min, Cha-Hwan Oh,_ Geon Joon Lee and YoungPak Lee

Sun-Ki Min and Sung-Hwan Han. “Nonlinear Optical Properties of

ZnO Nanorods Prepared by Using the Electro-deposition Method”,

J. Korean Phys. Soc., Vol. 55, No. 3, pp. 1005-1008, 2009.

191. Stoneham, A. M. “Why model high-k dielectrics?”, J. Non-Cryst.

Solids, Vol. 303, pp. 114-122, 2002.

192. Sun Kyu Kim, Vinh Van Le, Boxman, R. L., Zhitomirsky, V. N. and

Jeong Yong Lee, “Photoluminescence investigations of YAG:Eu

nanocomposite powder by high-energy ball milling”, Curr. Appl.

Phys., Vol. 9, pp. 86-88, 2009.

193. Sun Kyu Kim, Vinh Van Le, Boxman, R.L., Zhitomirsky, V.N. and

Jeong Yong Lee. “Cathodic arc plasma deposition of nano-

multilayered Zr–O/Al–O thin films”, Surf. Coat. Technol., Vol. 204,

pp. 1697-1701, 2010.

194. Sun-Dong Kim, Hwan Moon, Sang-Hoon Hyun, Jooho Moon, Joosun

Kim and Hae- Weon Lee. “Nano-composite materials for high-

performance and durability of solid oxide fuel cells”, J. Power Sources,

Vol. 163, pp. 392-397, 2006.

195. Surawut Chuangchote and Pitt Supaphol. “Fabrication of Aligned

Poly(vinyl alcohol) Nanofibers by Electrospinning”, J. Nanoscience

and Nanotechnology, Vol. 6, pp. 125-129, 2006.

196. Tacx, J. C. J. F., Schoffeleers, H. M., Brands, A. G. M. and Teuwen, L.

“Dissolution behavior and solution properties of poly vinyl alcohol as

determined by viscometry and light scattering in DMSO, ethylene

glycol and water”, Polymer, Vol. 41, pp. 947-957, 2000.

197. Takashi Goto and Teiichi Kimura. “High-speed oxide coating by laser

chemical vapor deposition and their nano-structure”, Thin Solid Films,

Vol. 515, pp. 46-52, 2006.

198. Tan, E. P. S., Ng, S. Y. and Lim, C. T. “Tensile testing of a single

ultrafine polymeric fiber”, Biomater., Vol. 26, pp. 1453-1456, 2005.

166

199. Tan, S-H., Inai, R., Kotaki, M. and Ramakrishna S. “Systematic

parameter study for ultra-fine fiber fabrication via electrospinning

process”, Polymer, Vol. 46, pp. 6128-6134, 2005.

200. Taylor, G. I. “Electrically driven jets”, Proc. R. Soc. London, Ser A,

Vol. 313, pp. 453-475, 1969.

201. Teeradech Jarusuwannapoom , Walaiporn Hongrojjanawiwat ,Sujinda

Jitjaicham, Ladawan Wannatong, Manit Nithitanakul, Cattaleeya

Pattamaprom , Piyawit Koombhongse ,Ratthapol Rangkupan , Pitt

Supaphol. “Effect of solvents on electro-spinnability of polystyrene

solutions and morphological appearance of resulting electrospun

polystyrene fibers”, European Polym. Journal, Vol. 41, pp. 409-421,

2005.

202. Theron, S. A., Zussman, E., Yarin, A. L. “Experimental investigation

of the governing parameters in the electrospinning of polymer

solutions”, Polymer, Vol. 45, pp. 2017–2030, 2004.

203. Tigau, N. “Influence of thermoannealing on crystallinity and optical

properties of Sb2S3 thin films”, Cryst. Res. Technol., Vol. 42,

pp. 281-285, 2007.

204. Tingyin Ning, Peng Gao, Wenlong Wang, Heng Lu, Wangyang Fu,

Yueliang Zhou , Dongxiang Zhang, Xuedong Bai, Enge Wang,

Guozhen Yang. “Nonlinear optical properties of composite films

consisting of multi-armed CdS nanorods and ZnO”, Opt. Mater.,

Vol. 31, No. 6, pp. 931-935, 2009.

205. Tong Lin, Jian Fang, Hongxia Wang, Tong Cheng and Xungai Wang.

“Using chitosan as a thickener for electrospinning dilute PVA solutions

to improve fibre uniformity”, Nanotechnology, Vol. 17,

pp. 3718-3723, 2006.

206. Toyoda, T., Nakanishi, H., Endo, S. and Irie, T. “The fitting

parameters of exponential optical absorption in Bi12SiO20”, J. Phys. D:

Appl. Phys., Vol. 18, pp.747- 751, 1985.

207. Tsuruoka, T., Liang, C. H., Terabe, K., Hasegawa, T. “Optical

waveguide properties of single Indium oxide nanofibers”, J. Opt. A:

Pure. Appl. Opt., Vol. 10, pp. 1-5, 2008.

208. Tuttle, R. W., Chowdury, A., Bender, E. T., Ramsier, R. D.,

Rapp, J. L. and Espe, M. P. “Electrospun ceramic fibers: Composition,

Structure and the fate of precursors”, Appl. Surf. Sci.., Vol. 254,

pp. 4925-4929, 2008.

167

209. Uchino, K. “Materials issues in design and performance of

piezoelectric actuators: an overview”, Acta Mater., Vol. 46, No. 11,

pp. 3745-3753, 1998.

210. Uchino.K., Ferroelectric Devices, Marcel Decker, New York, 2000.

211. Ushasree, P. M., Jayavel, R. and Ramasamy, P. “Influence of pH on

the characteristics of zinc tris (thiourea) sulfate (ZTS) single

crystals”, Mater. Chem. Phys., Vol. 61, pp. 270-274, 1999.

212. Van Schilfgaarde, M. and Mryasov, O. N., “Anomalous exchange

interactions in III-V dilute magnetic semiconductors”, Phys. Rev. B 63,

pp. 233205-233208, 2001.

213. Veli E. Kalayci, Prabir K. Patra, Yong K. Kim, Samuel C. Ugbolue

and Steven B. Warner. “Charge consequences in electrospun

polyacrylonitrile (PAN) nanofibers”, Polymer, Vol. 46, pp. 7191-7200,

2005.

214. Venkataramanan, V., Maheswaran, S., Sherwood, J. N., Bhat, H. L.

“Crystal growth and physical characterization of the semiorganic

bis(thiourea) cadmium chloride”, J. Cryst. Growth, Vol. 179,

pp. 605-610, 1997.

215. Vijaya Prakash, G., Pradeesh, K., Ashwani Kumar, Rajesh Kumar,

Venugopal Rao, S., Markham, M. L. and Baumberg., J. J. “Fabrication

and optoelectronic characterisation of ZnO photonic structures”, Mater.

Letters, Vol. 62, pp. 1183-1186, 2008.

216. Vijayalakshmi, U. and Rajeswari, S. “Preparation and Characterization

of Microcrystalline Hydroxyapatite using Sol Gel Method”, Trends

Biomater. Artif. Organs, Vol. 19, pp. 57-62, 2006.

217. Vinotha Boorana Lakshmi, P., Sakthi Raj, K. and Ramachandran, K.

“Synthesis and characterization of nano ZnS doped with Mn.”, Cryst.

Res. Technol., Vol. 44, pp. 153-158, 2009.

218. Viswanathamurthi, P., Bhattarai, N., Kim, H. Y., Lee, D. R., Kim, S.

R. and Morris, M. A. “Preparation and morphology of niobium oxide

fibres by electrospinning”, Chem. Phys. Letters, Vol. 374, No.1-2,

pp.79-84, 2003.

219. Vyacheslav F Solovyov, Harold J Wiesmann and Masaki Suenaga. “A

new method of HF control for synthesizing YBCO using the BaF2 ex

situ process”, Supercond. Sci. Technol., Vol. 16, pp. L37–L39, 2003.

168

220. Wac aw Tomaszewski and Marek Szadkowski. “Investigation of

Electrospinning with the Use of a Multi-jet Electrospinning Head”,

Fibers and Textiles in Eastern Europe, Vol. 13, No. 4(52), pp. 22-26,

2005.

221. Wang, Q. M. and Cross, L. E. “Tip deflection and blocking force of

soft PZT-based cantilever RAINBOW actuators”, J. Amer. Ceram.

Soc., Vol. 82, No. 1, pp. 103-110, 1999.

222. Wang, X. S., Wu, Z. C., Webb, J. F. and Liu, Z. G. “Ferroelectric and

dielectric properties of Li-doped ZnO thin films prepared by pulsed

laser deposition”, Appl. Phys. A: Mater. Sci. & Eng, Vol. 77,

No. 3-4, pp. 561-565, 2003.

223. Whited, R. C., Flaten, C. J. and Walker, W. C. “Exciton

thermoreflectance of MgO and CaO”, Solid State Commun., Vol. 13,

pp. 1903-1905, 1973.

224. Whitesides, G. M. and Grzybowski, B. “Self-assembly at all scales”,

Science, Vol. 295, pp. 2418-2421, 2002.

225. Won Keun Son, Ji Ho Youk, Taek Seung Lee and Won Ho Park.

“Effect of pH on electrospinning of poly (vinyl alcohol)”, Mater.

Letters, Vol. 59, pp. 1571-1575, 2005.

226. Xiaofeng Song, Dejiang Zhang and Meng Fan. “A novel toluene

sensor based on ZnO–SnO2 nanofiber web”, Appl. Surf. Sci., Vol. 255,

pp. 7343-7347, 2009.

227. Xiaorui Hou, Shengming Zhou, Yukun Li and Wenjie Li.

“Luminescent properties of nano-sized Y2O3:Eu fabricated by

co-precipitation method”, J. Alloys Compd., Vol. 494, pp. 382-385,

2010.

228. Xiaoyan Yuan, Arthur F. T. Mak, Kwok, K. W., Brian K. O. Yung .,

and Kangde Yao, “Characterization of Poly(L-lactic acid) Fibers

Produced by Melt Spinning”, J. Appl. Polym. Sci., Vol. 81,

pp. 251-260, 2001.

229. Xinyu Zhang, Warren J. Goux and Sanjeev K. Manohar. “Synthesis of

Polyaniline Nanofibers by Nanofiber Seeding”, J. Am. Chem. Soc.,

Vol. 126, pp. 4502-4503, 2004.

230. Xiuli Zhou, Wei Guo, Alejandro G. Perez-Bergquist, Qiangmin Wei,

Yanbin Chen, Kai Sun and Lumin Wang. “Optical Properties of GaSb

Nanofibers”, Nanoscale Res. Lett., Vol. 6, pp. 1-6, 2011.

169

231. Yan L. Cheah, Nutan Gupta, Stevin S. Pramana, Vanchiappan

Aravindan, Grace Wee and Madhavi Srinivasan. “Morphology,

structure and electrochemical properties of single phase electrospun

vanadium pentoxide nanofibers for lithium ion batteries”, J. Power

Sources, Vol. 196, No. 15, pp. 6465-6472, 2011.

232. Yang Yang, Haiying Wang, Xiaofeng Lu, Yiyang Zhao, Xiang Li and

Ce Wang. “Electrospinning of carbon/CdS coaxial nanofibers with

photoluminescence and conductive properties”, Mater. Sci. Eng. B,

Vol. 140, pp. 48-52, 2007.

233. Yangxin Zhou, Marcus Freitag, James Hone, Cristian Staii, Johnson,

A. T., Nicholas J. Pinto. and MacDiarmid, A. G. “Fabrication and

electrical characterization of polyaniline-based nanofibers with

diameter below 30 nm”, Appl. Phys. Lett., Vol. 83, pp. 3800-3802,

2003.

234. Yan-Hong Feng, Da-Wei Zhang, Jin-Ping Qu, He-Zhi He and Bai-Ping

Xu. “Rheological properties of sisal fiber/poly(butylene succinate)

composites”, Polymer Testing, Vol. 30, pp. 124-130, 2011.

235. Yanjun Huang, Ke Yu and Ziqiang Zhu. “Controllable synthesis of

novel In2O3 nanostructures and their field emission properties”,

Cryst. Res. Technol., Vol. 46, pp. 90-94, 2011.

236. Yao, L., Haas, T.W., Guiseppi-Elie, A., Bowlin, G. L., Simpson, D. G.

and Wnek, G. E. “Electrospinning and Stabilization of Fully

Hydrolyzed Poly(vinyl alcohol) Fibers”, Chem. of Mater., Vol. 15,

pp. 1860-1864, 2003.

237. Yarin, A. L. and Reneker, D. H. “Taylor cone and jetting from liquid

droplets in electrospinning of nanofibers”, J. Appl. Phys, Vol. 90,

pp. 4836-4846, 2001.

238. Yarin, A. L. and Zussman, E. “Upward needleless electrospinning of

multiple nanofibers”, Polymer, Vol. 45, pp. 2977-2980, 2004.

239. Yarin, A. L., Koombhongse, S. and Reneker D. H. “Bending instability

in electrospinning of nanofibers”, J. Appl. Phys., Vol. 89,

pp. 3018-3026, 2001.

240. Ying Yang, Zhidong Jia, Qiang Li, Liming Wang and Zhicheng Guan.

“Improving electrospinning nanofibers alignment in a large area by

using a insulating tube on the collector”, International Conference on

Solid Dielectrics, Winchester, U. K., pp. 8-13, 2007.

170

241. Yong Liu and Ji-Huan He. “Bubble Electrospinning for Mass

Production of Nanofibers”, International Journal of Nonlinear Sciences

and Numerical Simulation, Vol. 8, No. 3, pp. 393-396, 2007.

242. Yong Liu, Yufeng Song, Dairong Chen, Xiuling Jiao and Wenxing

Zhang. “Sol-Gel Synthesis of Polycrystalline ZnO and ZnS Fibers”,

J. Dispers. Sci. Technol., Vol. 27, pp. 1191-1195, 2006.

243. Youliang Hong, Tiecun Shang, Yanyan Li, Lizhu Wang, Ce Wang,

Xuesi Chen. and Xiabin Jing. “Synthesis using electrospinning and

stabilization of single layer macroporous films and fibrous networks of

poly (vinyl alcohol)”, J. Membrane Science, Vol. 276, No. 1-2, pp. 1-7,

2006.

244. Young Jun Ryu, Hak Yong Kim, Keun Hyung Lee, Heui Chon Park

and Douk Rae Lee. “Transport properties of electrospun nylon 6

nonwoven mats”, European Polymer Journal, Vol. 39, pp. 1883-1889,

2003.

245. Young-Pyo Jeon and Christopher L. Cox. “Simulation of Multifilament

Semicrystalline Polymer Fiber Melt-Spinning”, Journal of Engineered

Fibers and Fabrics, Vol. 4, No. 1, pp. 34-43, 2009.

246. Yuanxiang Gu, Fangfang Jian and Xian Wang. “Synthesis and

characterization of nanostructured Co3O4 fibers used as anode

materials for lithium ion batteries”, Thin Solid Films, Vol. 517,

pp. 652-655, 2008.

247. Yue Liu, Michael G. B. Drew and Ying Liu. “Preparation and

magnetic properties of barium ferrites substituted with manganese,

cobalt, and tin”, Journal of Magnetism and Magnetic Mater.s,

Vol. 323, No. 7, pp. 945-953, 2011.

248. Yuping Wang, Liangchao Li, Jing Jiang, Hui Liu, Haizhen Qiu. and

Feng Xu, “Conductivity and magnetic properties of

Zn0.6Cu0.4Cr0.5La0.04Fe1.46O4/ PPy composites prepared by in situ

inverse microemulsion polymerization”, React. Funct. Polym.,

Vol. 68, pp. 1587-1593, 2008.

249. Zaicheng Sun, Zussman, E., Yarin, A. L., Wendorff, J. H. and Greiner,

A. “Compound core-shell Polymer nanofibers by co-electrospinning”,

Adv. Mater., Vol. 15, No. 22, pp. 1929-1932, 2003.

171

250. Zhang, G., Kataphinan, W., Teye-Mensah, R., Katta, P., Khatri, L.,

Evans, E.A., Chase, G.G., Ramsier, R.D., Reneker, D.H. “Electrospun

nanofibers for potential space-based applications”, Mater. Sci. and

Eng.: B, Vol. 116, No. 3, pp. 353-358, 2005.

251. Zheng-Ming Huang, Zhang, Y.-Z., Kotaki, M. and Ramakrishna, S. “A

review on polymer nanofibers by electrospinning and their applications

in Nanocomposites”, Compos.Sci. Technol., Vol. 63, pp. 2223-2253,

2003.

252. Zheng-Wen Fu, T., Jun Ma and Qi-Zong Qin. “Nanostructured LiCoO2

and LiMn2O4 fibers fabricated by a high frequency electrospinning”,

Solid State Ionics, Vol. 176, pp. 1635-1640, 2005.

253. Zhou Gui, Xian Wang, Jian Liu, Shanshan Yan, Yanyan Ding,

Zhengzhou Wang and Yuan Hu. “Chemical growth of ZnO nanorod

arrays on textured nanoparticle nanoribbons and its second-harmonic

generation performance”, J. Solid State Chem., Vol. 179, No.7,

pp. 1984-1989, 2006.

254. Zongying Cai, Junshou Li and Yigang Wang. “Fabrication of zinc

titanate nanofibers by electrospinning technique”, J. Alloys Compd.,

Vol. 489, pp. 167-169, 2010.

255. Zou, C. W., Shao, L. X., Guo, L. P., Fu, D. J., Kang, T. W.

“Ferromagnetism and ferroelectric properties of (Mn, Li) co-doped

ZnO nanorods arrays deposited by electrodeposition”, J. of Cryst.

Growth, Vol. 331, No. 1, pp. 44-48, 2011.

256. Zuwei Ma, Masaya Kotaki, Thomas Yong, Wei He, Seeram

Ramakrishna. “Surface engineering of electrospun polyethylene

terephthalate (PET) nanofibers towards development of a new material

for blood vessel engineering”, Biomater., Vol. 26, No.15,

pp. 2527-2536, 2005.