EM 385-1-1 15 Sep 08

APPENDIX S

REFERENCES AND RESOURCES

SECTION A. REFERENCES

1. NUMBERED PUBLICATIONS

ACI 347 Guide to Formwork for Concrete

ANSI 01.1 Woodworking Machinery

ANSI A10.3 Safety Requirements for Powder-Activated Fastening Systems

ANSI A10.4 Safety Requirements for Personnel Hoists and Employee Elevators for Construction and Demolition Operations

ANSI A10.5 Safety Requirement for Material Hoists

ANSI A10.6 Safety Requirements for Demolition

ANSI A10.7 Safety Requirements for Commercial Explosives and Blasting Agents

ANSI A10.8 Safety Requirements for Scaffolding

ANSI A10.22 Safety Requirements for Rope-Guided and Non Guided Worker’s Hoists

ANSI A10.34 Protection of the Public on or Adjacent to Construction Sites

ANSI A14.1 Ladders – Wood – Safety Requirements

S-1

EM 3851-1 15 Sep 08

ANSI A14.2 Ladders – Portable Metal – Safety

Requirements

ANSI A14.3 -2008 Ladders – Fixed – Safety Requirements

ANSI A14.4 Safety Requirements for Job Made Wooden Ladders

ANSI B74.2 Specifications for Shapes and Sizes of Grinding Wheels, and for Shapes and Sizes and Identifications of Mounted Wheels

ANSI C95.4 Radio Frequency Antennas When Using Electric Blasting Caps During Explosive Operations

ANSI D6.1 Manual on Uniform Traffic Control Devices for Streets and Highways

ANSI Z41 Personnel Protection – Protective Footwear

ANSI Z80.3 Requirements for Nonprescription Sunglasses and Fashion Eyewear

ANSI Z88.2 Practices for Respiratory Protection

ANSI Z89.1 Personal Protection - Protective Headwear for Industrial Workers

ANSI Z117.1 Confined Spaces

ANSI Z136.1 Safe Use of Lasers

ANSI Z244.1 Personnel Protection – Lockout/Tagout of Energy Sources

S-2

EM 385-1-1 15 Sep 08

ANSI Z308.1 Minimum Requirements for Workplace First Aid Kits

ANSI Z358.1 Emergency Eyewash and Shower Equipment

ANSI Z490.1 Accepted Practices for Safety, Health and Environmental Training

ANSI Z535.1 Safety Color Code

ANSI Z535.2 Environmental and Facility Safety Signs

ANSI Z535.5 Accident Prevention Tags (for temporary hazards)

ANSI/ACDE-01 Divers – Commercial Diver Training – Minimum Standard

ANSI/AGA GPTC GPTC Guide for the Gas Transmission Z380.1 and Distribution Piping System

ANSI/API 2C Specification for Offshore Cranes

ANSI/ASME A13.1 Scheme for the Identification of Piping Systems

ANSI/ASME A17.1 Safety Code for Elevators and Escalators

ANSI/ASME B30.2 Overhead and Gantry Cranes, Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist

ANSI/ASME B30.3 Construction Tower Cranes

ANSI/ASME B30.4 Portal, Tower, and Pedestal Cranes

S-3

EM 3851-1 15 Sep 08

ANSI/ASME B30.5 Mobile and Locomotive Cranes

ANSI/ASME B30.6 Derricks

ANSI/ASME B30.8 Floating Cranes and Floating Derricks

ANSI/ASME B30.9 Slings

ANSI/ASME B30.10 Hooks

ANSI/ASME B30.11 Monorails and Underhung Cranes

ANSI/ASME B30.12 Handling Loads Suspended from Rotorcraft

ANSI/ASME B30.17 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)

ANSI/ASME B30.22 Articulating Boom Cranes

ANSI/ASME B30.26 Rigging Hardware

ANSI/ASME B31.1 Power Piping

ANSI/ASME B56.1 Safety Standard for Low Lift and High Lift Trucks

ANSI/ASSE A10.38 Basic Elements of an Employer’s Program to Provide a Safe and Healthful Work Environment

ANSI/ASSE A10.44 Control of Energy Sources (Lockout/Tagout) for Construction and Demolition

S-4

EM 385-1-1 15 Sep 08

ANSI/ASSE Z87.1 Practice for Occupational and Educational Eye and Face Protection

ANSI/ASSE Z359 Fall Protection Code

ANSI/ASSE Z359.0 Definitions and Nomenclature Used for Fall Protection and Fall Arrest

ANSI/ASSE Z359.1 Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components

ANSI/ASSE Z359.2 Minimum Requirements for a Comprehensive Managed Fall Protection Program

ANSI/ASSE Z359.3 Safety Requirements for Positioning and Travel Restraint Systems

ANSI/ASSE Z359.4 Safety Requirements for Assisted-Rescue and Self-Rescue systems, Subsystems and Components

ANSI/AWS D1.0 Code for Welding in Building Construction

ANSI/AWS D1.1 Structural Welding Code - Steel

ANSI/AWS F4.1 Recommended Safe Practices for Preparation for Welding and Cutting of Containers and Piping

ANSI/AWS Z49.1 Safety in Welding, Cutting and Allied Processes

ANSI/IEEE C95.2 Standard for Radio Frequency Energy and Current Flow Symbols

S-5

EM 3851-1 15 Sep 08

ANSI/IESNA RP-1 Practice for Office Lighting

ANSI/IESNA RP-8 Roadway Lighting ANSI Approved

ANSI/IESNA RP-12 Marine Lighting

ANSI/ISEA 105 Hand Protection Selection Criteria

ANSI/ISEA 107 High Visibility Safety Apparel

ANSI/SIA A92.2 Vehicle-Mounted Elevating and Rotating Aerial Devices

ANSI/SIA A92.3 Manually Propelled Elevating Aerial Platforms

ANSI/SIA A92.5 Boom-supported Elevated Working Platforms

ANSI/SIA A92.6 Self-Propelled Elevating Work Platforms

ANSI/UL 1313 Nonmetallic Safety Cans for Petroleum Products

AR 11-9 The Army Radiation Safety Program

AR 11-34 The Army Respiratory Protection Program

AR 40-5 Preventive Medicine

AR 95 Series Aviation

AR 200-1 Environmental Protection and Enhancement

AR 385-10 The Army Safety Program

S-6

EM 385-1-1 15 Sep 08

AR 385-11 Ionizing Radiation Protection

AR 385-40 Accident Reporting and Records

AR 385-55 Prevention of Motor Vehicle Accidents

AR 700-136 Tactical Land Based Water Resources Management in Contingency Operations

ASCE 7-98 Guide to the Use of Wind Load Provisions

ASTM D120 Standard Specification for Rubber Insulating Gloves

ASTM D1051 Standard Specification for Rubber Insulating Sleeves

ASTM F496 Standard Specification for In-Service Care of Insulating Gloves and Sleeves

ASTM F696 Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens

ASTM F852 Standard Specification for Portable Gasoline Containers for Consumer Use

ASTM F976 Standard Specification for Portable Kerosine Containers for Consumer Use

ASTM F1117 Standard Specification for Dielectric Overshoe Footwear

S-7

EM 3851-1 15 Sep 08

ASTM F1166 Standard Practice for Human

Engineering Design for Marine Systems, Equipment and Facilities

ASTM F1236 Standard Guide for Visual Inspection of Electrical Protective Rubber Products

ASTM F1506 Standard Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards

ASTM F1897 Standard Specification for Leg Protection for Chain Saw Users

ASTM F2412 Standard Test Methods for Foot Protection

ASTM F2413 Standard Specification for Performance Requirements for Foot Protection

CGA C6 Standard for Visual Inspection of Steel Compressed Gas Cylinders

CGA C8 Standard for Requalification of DOT-3HT, CTC-3HT, and TC-3HTM Seamless Steel Cylinders

CGA G7.1 Commodity Specification for Air

CMAA 70 Multiple Girder Electric Overhead Traveling Cranes

S-8

EM 385-1-1 15 Sep 08

DDESB TP No. 18 Minimum Qualifications for UXO Technicians and Personnel, Dec 2004

DFARS Subpart Drug-Free Work Force 252.223-7004

DOD 6055.09-STD DOD Ammunition and Explosives Safety Standards, Feb 08

DODI 4715.5-G Overseas Environmental Baseline Guidance Document

DODI 6055.1 DOD Safety and Occupational Health Program

DODI 6055.3 Hearing Conservation

DODI 6055.12 DOD Hearing Conservation Program

EM 385-1-97 Munitions and Explosives Response Actions

EO 12196 Occupational Safety and Health Programs for Federal Employees

EP 75-1-2 Unexploded Ordnance (UXO) Support During Hazardous, Toxic and Radioactive Waste (HTRW) and Construction Activities

EP 75-1-3 Recovered Chemical Warfare Materiel

(RCWM) Responses

EP 310-1-6A Sign Standards Manual, Volume 1

EP 310-1-6B Sign Standards Manual, Volume 2

S-9

EM 3851-1 15 Sep 08

EP 385-1-95a Basic Safety Concepts and

Considerations for OE Operations EP 385-1-95b Explosives Safety Submissions EP 1130-2-500 Inspection and Certification Agreement

Appendix L Between USACE and USCG

EP 1130-2-540 Project Operations and Environmental Stewardship Operations and Maintenance Guidance and Procedures

ER 95-1-1 Control and Use of Aircraft

ER 385-1-6 Standard Color and Markings for Hardhats

ER 385-1-91 Training, Testing, and Licensing of Boat Operators

ER 385-1-95 Safety and Health Requirements for Munitions and Explosives of Concern (MEC) Operations

FAR Clause 52.236-13 Accident Prevention

Federal Aviation General Operating and Flight Rules Regulation 91

Federal Aviation Rotorcraft External-Load Operations Regulation 133

Federal Aviation Operating Requirements: Commuter Regulation 135 and On Demand Operations and Rules Governing Persons On Board Such Aircraft

S-10

EM 385-1-1 15 Sep 08

FM 10-52 Water Supply in Theaters of Operations

FM 21-10/ Field Hygiene and Sanitation MCRP 4-11.1D

MIL-STD 101B Color Code for Pipelines and for Compressed Gas Cylinders

NAVMED P-5010- Manual of Naval Preventive Medicine 010-LP-207-1300

NAVSEA S9074-AQ Requirements for Welding GIB-010/248 Brazing Procedure and Performance Qualifications

NEC 250 Grounding

NEC 250.30 Grounding of Transformers and Generators

NEC 250.34 Grounding of Services Equipment

NEC 410 Lighting Fixtures, Lampholders, Lamps, and Receptacles

NEC 502 Class II Locations

NFPA 10 Portable Fire Extinguishers

NFPA 30 Flammable and Combustible Liquids Code

NFPA 30A Automotive and Marine Service Station Code

S-11

EM 3851-1 15 Sep 08

NFPA 51 Standard Design and Installation of

Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes

NFPA 58 Liquefied Petroleum Gas Code

NFPA 70E Standard for Electrical Safety Requirements for Employee Workplaces

NFPA 101 Life Safety Code

NFPA 241 Safeguarding Construction, Alteration, and Demolition Operations

NFPA 295 Wildfire Control

NFPA 302 Pleasure and Commercial Motor Craft

NFPA 327 Cleaning or Safeguarding Small Tanks and Containers without Entry

NFPA 386 Portable Shipping Tanks for Flammable and Combustible Liquids

NFPA 1977 Protective Clothing and Equipment for Wildland Fire Fighting

NIST Voluntary Product American Softwood Lumber Standard Standard DOC PS 20

Power Crane and Draglines Shovel Association Standard No. 4

SAE J167 Overhead Protection for Agricultural Tractors - Test Procedures and Performance Requirements

S-12

EM 385-1-1 15 Sep 08

SAE J220 Crane Boom Stops

SAE J231 Minimum Performance Criteria for Falling Object

SAE J386 Operator Restraint System for Off-Road Work Machines

SAE J1040 Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry, and Mining Machines

SAE J1042 Operator Protection for General-Purpose Industrial Machines

SAE J1043 Minimum Performance Criteria for Falling Object Protective Structure (FOPS) for Industrial Machines

SAE J1084 Operator Protective Structure Performance Criteria for Certain Forestry Equipment

SAE J1194 Roll Over Protective Structures (ROPS) for Wheeled Agricultural Tractors

SAE J1366 Rating Lift Cranes Operating on Platforms in the Ocean Environment

TB MED 577 Sanitary Control and Surveillance of Field Water Supplies

UFGS 01525 Safety Requirements

UL 943 Ground-Fault Circuit-Interrupters

S-13

EM 3851-1 15 Sep 08

5 CFR 293 Personnel Records

10 CFR 20 Standards for Protection Against Radiation

10 CFR 20 Assigned Protection Factors for Appendix A Respirators

10 CFR 20 Annual Limits on Intake (ALIs) and Appendix B Derived Air Concentrations (DACs) of Radionuclides for Occupational Exposure; Effluent Concentrations; Concentrations for Release of Sewerage

10 CFR Energy

10 CFR 20 Quantities of Licensed Material Appendix C Requiring Labels

10 CFR 20.1906 Procedures for Receiving and Opening Packages

14 CFR Aeronautics and Space

14 CFR 91 General Operating and Flight Rules

14 CFR 133 Rotorcraft External-Load Operations

14 CFR 135 Operating Requirements: Commuter and On Demand Operations and Rules Governing Persons On Board Such Aircraft

27 CFR Alcohol, Tobacco Products and Firearms

27 CFR 555 Commerce in Explosives

S-14

EM 385-1-1 15 Sep 08

29 CFR Labor

29 CFR 1904 Recording and Reporting Occupational Injuries and Illnesses

29 CFR 1910 Occupational Safety and Health Standards

29 CFR 1910 Commercial Diving Operations Subpart T

29 CFR 1910.94 Ventilation

29 CFR 1910.25 Portable Wood Ladders

29 CFR 1910.95 Noise Exposure Computation Appendix A

29 CFR 1910.109 Explosives and Blasting Agents

29 CFR 1910.119 Process Safety Management of Highly Hazardous Chemicals

29 CFR 1910.120 Hazardous Waste Operations and Emergency Response

29 CFR 1910.134 Respiratory Protection

29 CFR 1910.134 User Seal Check Procedures Appendix B-1

29 CFR 1910.134 OSHA Respirator Medical Evaluation Appendix C Questionnaire

29 CFR 1910.134 Information for Employees Using Appendix D Respirators When Not Required Under the Standard

S-15

EM 3851-1 15 Sep 08

29 CFR 1910.141 Sanitation

29 CFR 1910.145 Specifications for Accident Prevention Signs and Tags

29 CFR 1910.146 Permit-Required Confined Spaces

29 CFR 1910.155 Scope, Application and Definitions Applicable to Subpart L

29 CFR 1910.178 Powered Industrial Trucks

29 CFR 1910.213 Woodworking Machinery Requirements

29 CFR 1910.219 Mechanical Power-Transmission Apparatus

29 CFR 1910.1000 Air contaminants

29 CFR 1910.1000 Mineral Dusts Table Z-3

29 CFR 1910.1001 Asbestos

29 CFR 1910.1020 Access to Employee Exposure and Medical Records

29 CFR 1910.1025 Lead

29 CFR 1910.1030 Bloodborne Pathogens

29 CFR 1910.1096 Ionizing Radiation

29 CFR 1910.1200 Hazard Communication

29 CFR 1915 Occupational Safety and Health Standards for Shipyard Employment

S-16

EM 385-1-1 15 Sep 08

29 CFR 1915 Confined and Enclosed Spaces for Subpart B Other Dangerous Atmospheres in Shipyard Employment

29 CFR 1918.66 Cranes and Derricks Other Than Vessel’s Gear

29 CFR 1926 Safety and Health Regulations for Construction

29 CFR 1926 Excavations Subpart P

29 CFR 1926 Steel Erection Subpart R

29 CFR 1926 Blasting and the Use of Explosives Subpart U

29 CRF 1926.35 Employee Emergency Action Plans

29 CFR 1926.59 Hazard Communication

29 CFR 1926.62 Lead

29 CFR 1926.64 Process Safety Management of Highly Hazardous Chemicals

29 CFR 1926.65 Hazardous Waste Operations and Emergency Response

29 CFR 1926.754 Structural Steel Assembly

29 CFR 1926.803 Compressed Air

29 CFR 1926.1101 Asbestos

29 CFR 1960 Basic Program Elements for Federal Employees OSHA

S-17

EM 3851-1 15 Sep 08

30 CFR Mineral Resources

30 CFR 36 Approval Requirements for Permissible Mobile Diesel-Powered Transportation Equipment

30 CFR 56 Safety and Health Standards--Surface Metal and Nonmetal Mines

30 CFR 57 Safety and Health Standards--Underground Metal and Nonmetal Mines

30 CFR 70 Mandatory Health Standards-- Underground Coal Mines

30 CFR 71 Mandatory Health Standards--Surface Coal Mines and Surface Work Areas of Underground Coal Mines

33 CFR Navigation and Navigable Waters

33 CFR 88.13 Lights on Moored Barges

33 CFR 88.15 Lights on Dredge Pipelines

33 CFR 155 Oil or Hazardous Material Pollution Prevention Regulations for Vessels

33 CFR 155.320 Fuel Oil and Bulk Lubricating Oil Discharge Containment

33 CFR 156 Oil and Hazardous Material Transfer Operations

33 CFR 156.120 Requirements for Transfer

33 CFR 183 Boats and Associated Equipment

S-18

EM 385-1-1 15 Sep 08

40 CFR Protection of Environment

40 CFR 61 National Emission Standard for Subpart M Asbestos

40 CFR 141 National Primary Drinking Water Regulations

40 CFR 143 National Secondary Drinking Water Regulations

40 CFR 302 Designation, Reportable Quantities, and Notification

42 CFR Public Health

42 CFR 84 Approval of Respiratory Protective Devices

46 CFR Shipping

46 CFR 25.30-15 Fixed Fire Extinguishing Systems

46 CFR 45.115 Bulwarks and Guardrails

46 CFR 58.50-10 Diesel Fuel Tanks

46 CFR 64 Marine Portable Tanks and Cargo Handling Systems

46 CFR 98.30 Handling and Storage of Portable Tanks

46 CFR 160 Lifesaving Equipment

46 CFR 173 Special Rules Pertaining to Vessel Use

S-19

EM 3851-1 15 Sep 08

49 CFR Transportation

49 CFR U.S. DOT Hazardous Materials Chapter 1 Regulations

49 CFR 171 General Information, Regulations, and Definitions

49 CFR 172 Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information and Training Requirements

49 CFR 173 Shipping Container Specification Regulations of the Department of Transportation

49 CFR 174 Carriage by Rail

49 CFR 175 Carriage by Aircraft

49 CFR 176 Carriage by Vessel

49 CFR 177 Carriage by Public Highway

49 CFR 177.835 Class 1 (Explosive) Materials

49 CFR 178 Specifications for Packaging

49 CFR 179 Specifications for Tank Cars

49 CFR 192 Welding of Steel in Pipelines

49 CFR 571 Federal Motor Vehicle Safety Standards

S-20

EM 385-1-1 15 Sep 08

2. UNNUMBERED PUBLICATIONS

ABS, Guide for Certification of Cranes.

ACGIH, Threshold Limit Values and Biological Exposure Indices.

AIHA, Welding Health and Safety: A Field Guide for OEHS Professionals.

ASME, Boiler and Pressure Vessel Code.

ASME, Code for Unfired Pressure Vessels.

DOT Federal Highway Administration's, Manual on Uniform Traffic Control Devices for Streets and Highways.

ILO International Classification of Radiographs of Pneumoconioses, most recent edition.

National Classification Committee, National Motor Freight Classification, National Motor Freight Traffic Association, Alexandria, VA.

NBBI, National Board Inspection Code.

NIOSH, Respirator Decision Logic.

NIOSH, Work Practice Guide for Manual Lifting.

Occupational Safety and Health Act of 1970.

Oil Pollution Act of 1990.

Uniform Classification Committee, Uniform Freight Classification, National Railroad Freight Committee, Atlanta, GA.

United Nations, Recommendations on the Transport of Dangerous Goods, United Nations, New York, 1995.

S-21

EM 3851-1 15 Sep 08

U.S. Navy Diving Manual.

3. FORMS

ENG Form 5044-R USACE Entry Permit (LRA)

NRC Form 3 Notice to Employees

NRC Form 241 Report of Proposed Activities in Non- Agreement States, Areas of Exclusive Federal Jurisdiction, or Offshore Waters

OSHA 300 Form Log of Work-Related Injuries and Illnesses

OSHA 300A Form Summary of Work-Related Injuries and Illnesses

SF 46 U.S. Government Motor Vehicle Operator’s Identification Card

USCG Form 835 Notice of Merchant Marine Inspection Requirements

SECTION B. RESOURCES

Acoustical Society of America (ASA), 2 Huntington Quadrangle, Suite 1N01, Melville, NY 11747-4502; (516) 576-2360, (516) 576-2377 (fax)

American Association of State Highway and Transportation Officials (AASHTO), 444 N. Capitol St., N.W., Washington, DC 20001; (202) 624-5800, (202) 624-5806 (fax)

American Bureau of Shipping (ABS), 16855 Northchase Dr., Houston, TX 77060; (281) 877-5800

S-22

EM 385-1-1 15 Sep 08

American Concrete Institute (ACI), 38800 Country Club Dr., Farmington Hills, MI 48331; (248) 848-3700, (248) 848-3701 (fax)

American Conference of Governmental Industrial Hygienists (ACGIH), 1330 Kemper Meadow Dr., Cincinnati, OH 45240; (513) 742-2020

American Gas Association (AGA), 400 N. Capitol St., N.W., Washington, DC 20001; (202) 824-7000, (202) 824-7115 (fax)

American Industrial Hygiene Association (AIHA), 2700 Prosperity Ave, Suite 250, Fairfax, VA 22031; (703) 849-8888, (703) 207-3561 (fax)

American Institute of Steel Construction (AISC), One East Wacker Dr., Suite 3100, Chicago, IL 60601-2001; (312) 670-2400, (312) 670-5403 (fax)

American Institute of Timber Construction (AITC), 7012 S. Revere Pkwy, Suite 140, Englewood, CO 80112; (303) 792-9559, (303) 792-0669 (fax)

American National Standards Institute (ANSI), 25 West 43rd St., New York, NY 10036; (212) 642-4900, (212) 398-0023 (fax)

American Petroleum Institute (API), 1220 L St., NW, Washington, DC 20005-4070; (202) 682-8000, (202) 682-8232 (fax)

American Society of Civil Engineers (ASCE), 1801 Alexander Bell Dr., Reston, VA 20191-4400; (703) 295-6300, (703) 295-6222 (fax)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), 1791 Tullie Circle, N.E., Atlanta, GA 30329-2305; (404) 636-8400, (404) 321-5478 (fax)

American Society of Mechanical Engineers (ASME), Three Park Ave., New York, NY, 10016-5990; (212) 591-7722, (212) 591-7674 (fax)

S-23

EM 3851-1 15 Sep 08

American Society of Safety Engineers (ASSE), 1800 E. Oakton St., Des Plaines, IL 60018-2187 ; (847) 699-2929, (847) 768-3434 (fax)

American Society for Testing and Materials (ASTM), 100 Barr Harbor Dr., West Conshohocken, PA 19428-2959; (610) 832-9585, (610) 832-9555 (fax)

American Welding Society (AWS), 550 LeJeune Rd., N.W., Miami FL 33126; (305) 443-9353, (305) 443-7559 (fax)

Association of Diving Contractors (ADC), 5206 FM 1960 West, Suite 202, Houston, TX 77069; (281) 893-8388, (281) 893-5118 (fax)

Compressed Air and Gas Institute (CAGI), 1300 Sumner Ave., Cleveland, OH 44115-2851; (216) 241-7333, (216) 241-0105 (fax)

Compressed Gas Association (CGA), 4221 Walney Rd., 5th Floor, Chantilly, VA 20151-2923; (703) 788-2700, (703) 961-1831 (fax)

Concrete Reinforcing Steel Institute (CRSI), 933 Plum Grove Rd., Schaumberg, IL 60173; (847) 517-1200, (708) 517-1206 (fax) Conveyor Equipment Manufacturers Association (CEMA), 6724 Lone Oak Blvd, Naples, FL 34109; (239) 514-3441, (239) 514-3470 (fax) Gas Piping Technology Committee (GPTC, ANSI Z380.1), American Gas Association, 400 N. Capitol Street, N.W., Washington, DC 20001; (202) 824-7000

Grinding Wheel Institute (GWI), 30200 Detroit Rd., Cleveland, OH 44115-1967; (216) 899-0010, (216) 892-1404 (fax)

Hardwood Plywood and Veneer Association. 1825 Michael Faraday Dr., Reston, VA 20195-0789; (703) 435-2900, (703) 435-2537 (fax)

S-24

EM 385-1-1 15 Sep 08

Human Factors and Ergonomics Society, P.O. Box 1369, Santa Monica, CA 90406-1369; (310) 394-1811, (310) 394-2410 (fax)

Illuminating Engineering Society of North America (IESNA), 120 Wall St., Floor 17, New York, NY 10005; (212) 248-500, (212) 248-5017 (fax)

Institute of Electrical and Electronics Engineers (IEEE), 3 Park Ave, 17th Floor, New York, NY 10016-5997; (212) 419-7900, (212) 752-4929 (fax)

Institute of Makers of Explosives (IME), 1120 19th St., N.W., Suite 310, Washington, DC 20036; (202) 429-9280, (202) 293-2420 (fax)

International Organization for Standardization, 1, rue de Varembé, Case postale 56, CH-1211 Geneva 20, Switzerland; +41 22 749 01 11, +41 22 7333 34 30 (fax)

International Safety Equipment Association, 1901 N. Monroe St., Arlington, VA 22209-1762; (703) 525-1695, (703) 528-2148 (fax)

Material Handling Institute (MHI), 8720 Red Oak Blvd., Suite 201, Charlotte, NC 28217; (704) 676-1190, (704) 676-1199 (fax)

Mine Safety and Health Administration (MSHA), 1100 Wilson Blvd., 21st Floor, Arlington, VA 22209-3939; (202) 693-9400, (202) 693-9401 (fax)

National Association of Marine Surveyors, P.O. Box 9306, Chesapeake, VA 23321-9306; (757) 488-9538, (757) 488-0584 (fax)

National Association of Safe Boating Law Administrator (NASBLA), 1500 Leestown Rd., Suite 330, Lexington, KY 40511; (859) 225-9487, (859) 231-6403 (fax)

S-25

EM 3851-1 15 Sep 08

National Board of Boiler and Pressure Vessel Inspectors (NBBI), 1055 Crupper Ave., Columbus, OH 43229; (614) 888-8320, (614) 888-0750 (fax)

National Bureau of Standards (NBS). See National Institute for Standards and Technology (NIST)

National Electrical Manufacturers Association (NEMA), 1300 N. 17th St., Suite 1847, Rosslyn, VA, 22209; (703) 841-3200, (703) 841-5900 (fax)

National Fire Protection Association (NFPA), 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02169-7471; (617) 770-3000, (617) 770-0700 (fax)

National Institute for Occupational Safety and Health, 200 Independence Ave, S.W., Rm 715H, Washington, DC 20201; (202) 401-6997

National Institute for Standards and Technology (NIST), 100 Bureau Dr., Stop 3460, Gaithersburg, MD 20899-6478; (301) 975-6478, (301) 975-2128 (fax)

National Safety Council (NSC), 1121 Spring Lake Dr., Itasca, IL 60143-3201; (630) 285-1121, (630) 285-1315 (fax)

Naval Sea Systems Command (NAVSEA), 1333 Isaac Hull Ave, S.E., Washington Navy Yard, DC 20376; (202) 781-000

Occupational Safety and Health Administration (OSHA), 200 Constitution Avenue, NW, Washington, DC 20210; 1-800-321-6742

Power Tool Institute (PTI), 1300 Sumner Ave, Cleveland, OH 44115-2851; (216) 241-7333, (216) 241-0105 (fax)

Scaffold Industry Association (SIA), 20335 Ventura Blvd., Suite 420, Woodland Hills, CA 91364; (818) 610-0320, (818) 610-0323 (fax)

S-26

EM 385-1-1 15 Sep 08

Scaffold, Shoring, and Forming Institute (SSFI), 1300 Sumner Ave, Cleveland, OH 44115-2851; (216) 241-7333, (216) 241-0105 (fax)

Society of Automotive Engineers (SAE), 400 Commonwealth Dr., Warrendale, PA 15096-0001; (724) 776-4841, (724) 776-0790 (fax)

Underwriters Laboratory (UL). 333 Pfingsten Rd., Northbrook, IL60062; (847) 282-8800, (847) 407-1395 (fax)

United States Government Printing Office (GPO), Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402; (202) 512-1530, (202) 512-1262 (fax)

S-27

EM 3851-1 15 Sep 08

S-28

BLANK