References 1 P. G. Charalambides, J. Lund, A. G. Evans and R. M. ...

Development and Characterization of Novel Cr-Free Electrode for Welding Stainless Steel forNaval applications

References

1 P. G. Charalambides, J. Lund, A. G. Evans and R. M. McMeeking, A Test Specimen for Determining the Fracture Resistance of Bimaterial Interfaces, P. G. Charalambides, J. Lund, A. G. Evans and R. M. McMeeking, J. Appl. M ech .lll March, 77-82 (1989)

2 R. L. O’Brien, Welding Handbook:Welding Processes, American Welding Society, Miami, Fla, 8th edition. 1991. Vol. 2.

3 Moniz, B. J., and Miller, R. T, Welding Skills, 4th edition, American Technical Publisher, 2010

4 Key, J. F. Arc physics o f gas tungsten arc welding. ASM Handbook. 10th edition, vol. 6, ASM International 1993

5 Zhang, Y. M., R., Kovacevic, and Li, L. Adaptive control of full penetration gas tungsten arc welding. IEEE Transactions on Control Systems Technology 4(4);1996, pp 10.

6 Zhang, Y. M. Real-Time Weld Process Monitoring, Woodhead Publishing, Limited. April 2008

7 Lyttle, K. A. Shielding gases for welding. ASM Handbook, ASM International 10th edition, 1993, vol. 6.

8 Mortensen, A., and Suresh, S. Functionally graded materials and metal-ceramic composites: Part 1 Processing. International materials Reviews 40, 1995, pp. 239-265.

9 Markworth, A. J., Ramesh, K., and Parks, W. Review: Modelling studies applied to functionally graded materials. Journal o f Materials Science 30, 1995, pp. 2183-2193

10 Mellet-d’Huart. A model o f action to approach embodiment: a cornerstone for the design o f virtual environments for learning virtual reality. Journal of Virtual Reality 10(3-4): 2006, 253-269.

11 Fast, K., Gifford, T., and Yancey, R. Virtual training for welding. 3rd IEEE and ACM International Symposium on Mixed and Augmented Reality, 2004,pp. 298, 299.

12 Ariacutty Jayendran, "The joining of metals by soldering and welding", Englisch fiir Maschinenbauer, Vieweg 2007, pp 27-32

13 Choquet, C. Arc: Today’s virtual reality solution for welders. In International Conference o f Safety and Reliability o f Welded Components in Energy and Processing Industry, on the occasion of the 61st IIW Annual Assembly Conference. 2008 pp 201-216

14 C.E. Jackson, "Fluxes And Slags in Welding," WRC Bulletin- 190, Feb 2005, Welding Research Council

15 "Specification for Carbon Steel Electrodes for Flux Cored Arc Welding," AWS A5.20-79, AWS, 1979

16 R. Meredith, U.S. Patent 2,274,631, Feb 194217 S. Kou, Welding Metallurgy, John Wiley & Sons, 1987, P 1018 T. Myers, Why the growing interest in gas tungsten arc welding? The Fabricator,

R V Center for Cognitive Technologies, R V College o f Engineering, Bangalore-S9. 20


Vol 22 (No. 9), Nov 1992, P 38 -3919 N.M. Madator, Influence o f the Parameters of the Underwater Welding Process

on the Intensity o f Metallurgical Reactions, Weld. Res. Abroad, Vol 3, 1972, P63

20 Larry Jeffiis, Welding Principals and Applications, 5th Edition, 1999, Thomson Delmar Learning, Delmar Publishers

21 Md Ibrahim Khan, Welding Science and Technology, Publishers New Age Intemational (P) Ltd., Publishers Copyright 2007.

22 Welding Brazing and Soldering,Vol 6, ASM intemational, ASM publishers, 199323 C.L. Tsai And J.H. Wu, "An Investigation O f Heat Transport Phenomena In

Underwater Welding," Presented At The ASME Winter Aimual Meeting (Miami Beach, FI), 1985

24 N.S. Boulton and H.E. Lance-Martin, Residual Stresses in Arc Welded Plates, Proc. Inst. M eek Eng., Vol 33, 1986, P 295

25 R. Pavelic, R. Tanakuchi, O. Czehara, and P. Myers, Experimental and Computed Temperature Histories in Gas Tungsten Arc Welding In Thin Plates, Weld. J.,Vol48 (No. 7), 1969, P 295s

26 E. Friedman, "Finite Element Analysis of Arc Welding," Report Wapd-Tm-1438, Department of Energy, 1980

27 Ogawa Y, Irie T, Ono Y, et al.. Effect o f shielding gas on underwater C 02 welding. Proceedings o f the 17th OMAE, 1998.

28 Irie T, Ono Y, Matsushita H, et al., Formation o f local cavity by water curtain nozzle. Proceedings of 16th OMAE, vol. 3. 1997. p. 43-50.

29 Ogawa Y. Detection o f wet condition for underwater local dry welding. Proceedings o f Eighth Intemational Offshore and Polar Engineering Conference, 1998, vol. 4,

30 Chen W, Zhang X, et al. Sensing and control system of process quality in C 02 laser deep penetration welding. Proc SPIE 1998; 3550:287-97.

31 K. Sato, M. Kobayashi, et al., Maintenance technologies for reactor intemals, Toshiba Rev. 55 (10) (2000) 37-41

32 Xudong Zhang, Eiji Ashida, Susumu Shono, Fukuhisa Matsuda, "Effect of shielding conditions of local dry cavity on weld quality in underwater Nd:YAG laser welding," Journal o f Materials Processing Technology 174 (2006) 34-41

33 Paton, B.E., 1997. Papers Presented at Underwater Wet Welding and Cutting: Intemational Seminar and Workshop, TWI North, Middleborough, UK, April1997, pp 17-18.

34 Shi, Y.H., Wang, G.R., Li, G.J, Adaptive robotic welding system using laser vision sensing for underwater engineering. In: IEEE Intemational Conference on Control and Automation, Guangzhou, China, May 30,2007-June 1.

35 Yushchenko, K.A., Gretskii, Y.Y., Maksimov, S.Y. Research on the metallurgical characteristics of wet welding physics for steel stmctures. In: Wet Welding and Cutting Conference, Middleborough, England. 1997

36 Richardson, I.M., Woodward, N.J., Billingham, J, Deepwater welding for

R V Center for Cognitive Technologies, R V College of Engineering, Bangalore-59. Page 121


installation and repair - a viable technology? In: Proceedings o f The Twelfth (2002) International Offshore and Polar Engineering Conference, Kitakyushu, Japan, 2002, May 26-31.

37 Nixon, J.H, Underwater Repair Technology. Gulf Professional Publishing, 199538 Statistical analysis of the arc behavior in dry hyperbaric GMA welding from 1 to

250 bar Amin S. Azara, Neil Woodward, Hans Fostervoll, Odd M. Akselsena, "Statistical analysis o f the arc behavior in dry hyperbaric GMA welding from 1 to250 bar". Journal of Materials Processing Technology 212 (2012) 211-219

39 B.E. Paton, V.N. Kubasov, Experiment on metal welding in space, Avtomaticheskaya Svarka 5 (1970) 7-12.

40 Milo Nance, Martin Marietta Corporation; Welding in Space and Low-Gravity Environments, Jerald E. Jones, Colorado School o f Mines for ASM Handbook - Vol 06 - Welding, Brazing, and Soldering, ASM publishers, 1993

41 E.C. Mckannan and R.M. Poorman, Paper 35812, George C. Marshall Space Flight Center, Alabama, 1974, P 20

42 R.E. Monroe, "Characterization o f Metals Melting Risks: Skylab Experiment M551," Nasa Contractor Report, Battelle Memorial Institute, Columbus, Ohio, 4 Dec 1973, P 109

43 B.E. Paton, D.A. Dudko, V.F. Lapchinskii, Welding processes in space, in; Welding and Special Electrometallurgy, Naukova Dumka, Kiev, 1984, pp. 121128.

44 A. Block-Bolten, T.W. Eager, Metal vaporization from weld pools, Metallurg. Trans. B 15B (1984) 4 61^69 .

45 D. Venkateswarlu, N. R. Mandal, M. M. Mahapatra, and S. P. Harsh, Tool Design Effects For Fsw of AA7039, Welding Journal, February 2013, Vol. 92, 41s-47s.

46 Thomas, W. M., Nicholas, E. D., Needham, J. C., Murch, M. G., Temple-Smith, P., and Dawes, C. J. 1993. Friction stir butt welding (The Welding Institute (TWI)). PCT World Patent Application W093/10935; field: November 27, 1992 (UK 9125978.8, December 6,1991); publication: June 10,1993.

47 Thomas, W. M., Threadgill, P. L., and Nicholas, E. D. 1999. The feasibility offriction stir welding steel. Science and Technology o f Welding and Joining 4:365-372.

48 C.J. Dawes, An introduction to fnction stir welding butt welding and its developments. Welding and Fabrication Jan (1995).

49 L.A.C. de Filippis, A.D. Ludovico, A. Scialpi, R. Surace. Experimental and statistical analysis of friction stir welded AA 2024 T3 thin sheet, CIRP ICMe 04, 30.6-2.7.2004 Sorrent, Italy

50 R. Kovacevic, Joining o f A16061 to AISI1018 steel by combinated effectes offusion and solid state welding. International Journal o f Machine Tools &Manufacture 44 (11) (2004) 1205-1214.

51 M.R. Amaya-Vazquez, J.M. Sanchez-Amaya, Z. Boukha, F.J. Botana, Microstructure, microhardness and corrosion resistance of remelted TiG2 and

R V Center for Cognitive Technologies, R V College o f Engineering, Bangalore-S9. Page 122


Ti6A14V by a high power diode laser, Corrosion Science, 56 (2012), pp. 36-4852 Baeslack III, W.A., Liu, P.S., Barbis, D.P., Schley, J.R., Wood, J.R. a. Postweld

Heat Treatment of GTA Welds in a High-Strength Metastable Titanium Alloy - Beta-C™. Titanium’92, Science & Tech., F.H. Froes and I. Chaplan (eds), TMS, 1993, pp. 1469-1476.

53 Becker, D.W., Baeslack III, W.A, Property-microstructure relationships in metastable-beta titanium alloy weldments. Welding Journal, 59, Research Suppl.,pp. 1980, 85s-92s.

54 W. Robert, J.R. Messier, The greatest story never told: EB welding on the F-14, Weld J, 86 (2007), pp. 4 1 ^ 7

55 Z.Y. Mao, Application analysis o f electron beam welding technology in large aircraft,Aeronaut Manuf Technol (2) (2009), pp. 92-94

56 M.B. Henderson, D. Arrell, R. Larsson, M. Heobel, G. Marchant, Nickel based superalloy welding practices for industrial gas turbine applications, Sci Technol Weld Join, 9 (2004), pp. 13-21

57 L.J. Tan, Z.K. Yao, C. Qin, H.Z. Guo, J.W. Zhang, Effects o f deformation temperature on microstructure and mechanical properties o f electron beam welded joint of dissimilar titanium alloys Chinese Journal o f Aeronautics, 2013, 26(1), 217-223

58 P. Ferro, A. Zambon, F. Bonollo, Investigation o f electron-beam welding in wrought Inconel706-experimental and numerical analysis. Mater Sci Eng A, 392(2005), pp. 94-105

59 Verhaeghe, G., Hilton, P. Laser welding of low-porosity aerospace aluminium alloy. Proceeding o f 34th International MATADOR Conference, UMIST, 2004 Manchester, UK.

60 Seto, N., Katayama, S., Matsunawa, A. Porosity formation mechanism and suppression procedure in laser welding of aluminium alloys. Welding International, al5;3,2001p. 191-202.

61 E N ISO 13919-2:2001. Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys.

62 Avilov, V., Moldovan, R, Electromagnetic weld pool control by C 02 and YAG disk laser welding of thick stainless steel plates. Proceedings o f EPM. 2009

63 H.R. Ghazvinlo, A. Honarbakhsh and N. Shadfar, Effect o f Arc Voltage, Welding Current and Welding Speed on Fatigue Life, Impact Energy and Bead Penetration o f AA6061 joints Produced by robotic MIG Welding. Procedia Engineering, Volume 41, 2012, Pages 1502-1506

64 Erdal Karadeniz, Ugur Ozsarac and Ceyhan Yildiz, The Effect o f Process Parameters on Penetration in Gas Metal Arc Welding Processes, Material and Design 28 (2007) 649-656.

65 Dilthey, U, Fuest, D, Scheller, W.: Laser welding with filler wire. In: Optical and Quantun Electronics, 7(1995), pp.1181-1191

66 Sun, Z. Kuo, M, Bridging the joint gap with wire feed laser welding. In: Journal

R V Center for Cognitive Technologies, R V College of Engineering, Bangaiore-59. Page 123


of Materials Processing Technology, 87 (1999), pp. 213-22267 C.S. Chai, T.W. Eagar, Slag-metal equilibrium during submerged arc welding,

Metall. Trans. B (12B) (1981) 539-547.68 “Filler Metal Comparison Charts," AWS FMC-89, American Welding Society69 Welding Handbook, 8th Ed., Vol 2, AWS, 199170 Lesnewich A, MIG wlding with Pulsed power. Welding Research Council

Bulletin, No 170,15, 197271 S. Missori and C. Koerber, “Laser Beam Welding of Austenitic-Ferritic

Transition Joints”, Welding Research Supplement, 125s-134s, March 1997.72 Kabir, A.S.H., Cao, X., Medraj, M., Wanjara, P., Cuddy, J., Birur, A., 2010.

Effect o f welding speed and defocusing distance on the quality o f laser welded Ti-6A1-4V. In: Proceedings o f the Materials Science and Technology (MS&T) 2010 Conference, Houston, USA, pp. 2787-2797.

73 P. Kanjilal, T.K. Pal, S.K. Majumdar, "Combined effect of flux and welding parameters on chemical composition and mechanical properties o f submerged arc weld metal". Journal o f Materials Processing Technology 171 (2006) 223-231

74 Cary, Howard B. Modem Welding Technology, 5th ed. Englewood Cliffs, NJ: Prentice-Hall, (2002). p i 54

75 Raja. A, Rohira, K.L, and Samidas S, "Flux cored arc welding - selection of consumables, equipments and applications." WRI Jounal (v20, n4), (1999), pp 124-129.

76 H.B. Cary, Modem Welding Technology, 2nd Ed., Prentice-Hall, 198977 “Technical Guide for Shielded Metal Arc Welding," Hobart Brothers Co.200278 Antonini JM, Lawryk NJ, Krishna Murthy GG, Brain JD. Effect o f welding fume

solubility on lung macrophage viability and function in vitro. J Toxicol Environ Health 1999;58:343-63.

78 Zimmer AT, Biswas P. Characterization of the aerosols resulting from arc welding processes. J Aerosol Sci 2001;32:993-1008.

79 Jenkins NT. Chemistry o f airbome particles formed from metallurgical processing, Ph.D. Dissertation, Massachusetts Institute of Technology, 2003

80 Bureau o f Labor Statistics.Welders, cutters, solderers, and brazers. In: Occupational Employment Statistics: Occupational Employment andWages, 2002. U.S. Department o f Labor. Accessed 01/28/2004; available at: http://www.bls.gOv/oes/2002/oes514121 .htm.

81 Occupational Safety and Health Administration. Occupational Exposure to Hexavalent Chromium. Department o f Labor. 2006. Federal Register p. 1010010385.

82 T. Wittczak, J. Walusiak, C. Palczynski, Welding-related respiratory diseases, Med. Pr. 60 (2009) 201-208.

83 Frank Marlow P E Welding Fabrication and Repair, Question and Anwers, Industrials Press, First Edition, NY, Feb 2002,

84 R.D. Campbell, "An Investigation into the Physical Metallurgy, Welding Metallurgy, Hot Cracking and Weld Pool Shape of Ferritic Stainless Steels,"

R V Center for Cognitive Technologies, R V College o f Engineering, Bangalore-59. Page 124

http://www.bls.gOv/oes/2002/oes514121


Ph.D. Thesis. 200285 W. Lin, J.C. Lippold, and W.A. Baeslack, An Evaluation o f Heat-Affected Zone

Liquation Cracking SusceptibiUty, Part L Development of A Method for Quantification, Weld. J., Vol 72 (No. 4), April 1993, P 135-S To 153-S, Rensselaer Polytechnic Institute, Troy, New York, 1987

86 The ASM Handbook Committee, Welding, Brazing, And Soldering, 1993, Volume 6, ASM Handbook. ASM publishers.

87 T. Lau, G.C. Weatherly, And A. Mclean, The Sources O f Oxygen And Nitrogen Contamination In Submerged Arc Welding Using Cao-A12o3 Based Fluxes, Weld. J., Vol 64 (No. 12), 1985, P 343s-347s

88 Hand book Committee ‘Technical Hand Book of Boehler welding” Edition 200889 Welding Handbook Committee, Sandvik Stainless Welding Products, 201290 Lincoln Electric Company, The Procedure Handbook of Arc Welding 1973, 12*

Edition.91 Technical Handbook of ESAB, Stainless steel welding Edition 26* ̂2005.92 Thomas P.N. CMWINC-Hand book for electrode manufacturing, CMWINC

publication Edition 9* 200493 ESAB Handbook Committee “Nickel alloy welding product catalogue” 4*̂

Edition 200894 Catalogue Committee “Welding Product Catalogue-Manufacturing” Ed 1^ 2005.95 Sharada Welding Product Catalogue “Welding Electrode manufacturing

Handbook and Catalogue” 3̂ “* Edition, 199996 ESAB Handbook Committee “Stainless steel welding product catalogue”, ESAB

Hand Book Publishers, 9“’ Edition 201197 Suresh W. “Welding Guide for Ferrous Materials”, AdorFontech Publishers 5**’

Ed 200698 Stefan B W olf “Welding Guide for Non-Ferrous Materials”, AdorFontech

Publishers 5**’ Ed 200499 Handbook Committee, “Lincoln Electric Company, The Procedure Handbook of

MIG Welding “ 1983, Lincoln Publishers US, 15th Edition100 Rajeev Katiyar, US 7807948 B2, Patent Filed 2005101 Handbook Committee, “Lincoln Electric Company, The Procedure Handbook of

MIG Welding for High End applications “1997, Lincoln Publishers US, 5th Edition

102 Novel computations of a moving boundary heat conduction problem applied to EDM technology Computers & Chemical Engineering, Volume 15, Issue 8, August 1991, Pages 609-618 M.A. Barrufet, M.R. Patel, P.T. Eubank

103 Li Li, Y.S. Wong, J.Y.H. Fuh, L. Lu, EDM performance o f TiC/copper-based sintered electrodes. Materials & Design, Volume 22, Issue 8, December 2001, Pages 669-678,

104 Tian Yuan, Du Dong, Cai Guorui, Wang Li, Zhang Hua, Automatic DefectDetection in X-Ray Images Using Image Data Fusion, Tsinghua Science and Technology, Issn 1007-0214 12/15 Pp720-724, Volume 11, Number 6,



December 2006.105 Danm W, Rose P, Heidt H, Boriljies J. Automatic recognition of weld defects in

X-ray inspection [J], Br J NDT 1987;29(2):79-82.106 Wang QG, Apelian D, Lados DA. Fatigue behavior o f A356-T6 alxaminum cast

alloys. Part I. Effect o f casting defects. J Light Metals 2001; 1:73-84.107 Yi Sun, Peng Bai, Hong-yu Sun, Ping Zhou, Real-time automatic detection of

weld defects in steel pipe, NDT&E International 38 (2005) 522-528108 Hayes, C. (1997). ABC’s of nondestructive weld examination. Weld, 76(5), 46

51.109 Antoni Turo, Juan A. Chavez, Miguel J. Garcia-Hemandez, A ndr^ Bulkai, Peter

Tomek,Gabor Toth, Anna Girones, Jordi Salazar, Ultrasonic inspection system for powder metallurgy parts. Measurement 46 (2013) 1101-1108.

110 Hans R,Kranz E,Weiss H.Under-sodium viewing— a method to identify objects in an opaque medium.Liquid Metal Engineering and Technology 1984;BNES, London: p.419-23.

111 McKnight J A, Burton E J, Fenemore P,Recent advanced in the technology of under-sodium inspection in LMFBRs. Liquid Metal Engineering and Technology 1984; BNES, London:p.423-30.

112 Edward GR. Inspection of welded joints. ASM handbook, welding, brazing and soldering, vol. 6. Materials Park, OH: ASM International; 1993. p. 1081-8.

113 Wang G, Warren LT. Automatic identification of different types o f welding defects in radiographic images. NDT E Int 2002; 35(8): 519-28

114 Liao TW. Classification of welding flaw types with fiizzy expert systems. Expert Systems with Applications 2003; 25(1):101-11.

115 Liao TW.Fuzzy reasoning based automatic inspection of radiographic welds: weld recognition. Journal o f Intelligent Manufacturing 2004; 15(1): 69-85.

116 Ker J, Kengskool K. An efficient method for inspecting machined parts by a fixtureless machine vision system. Proceedings o f SME Vision, Detroit, vol. 2; 1990. pp. 45-51.

117 Daaland A. Real-time radiography for in-service inspection o f flexible pipeline system. Trends in NDE science and technology. Proceedings o f the Fourteenth World Conference on Non-Destructive Testing, New Delhi, vol. 3; 1996. pp. 1361-1364.

118 Jacobsen C, Zscherpel U. Crack detection in digitized radiographs with neuronal methods. Proceedings o f the Seventh European conference on Non-Destructive Testing, Copenhagen, vol. 3(8); 1998. pp. 26-29.

119 Nuding W, Gottwald HR, Sauerwein C. Radioscopic flaw detection during welding. Proceedings o f the Seventh European Conference on Non-Destructive Testing, vol. 3(8); 1998.

120 Rihar G, Varilstvo ZA, Rant J, Stefan J. The first application of imaging plates to an examination of welded joints. Proceedings o f the Seventh European Conference on Non-Destructive Testing, vol. 3(8); 1998.

121 Zscherpel U, Bellon C. Wall thickness estimation from digitized radiographs.



Proceedings o f the Seventh European Conference on Non-Destructive Testing, Copenhagen, vol. 3(8); 1998.

122 Singh RP, Madhav E. Quality control by radiography. Trends in NDE Science and Technology. Proceedings o f the fourteenth World conference on NonDestructive Testing, New Delhi, vol. 3; 1996. pp. 1951-54.

123 D.A. Akinlade, W.F. Caley, N.L. Richards, M.C. Chaturvedi, "Microstructural and thermal processing effects on adding 1 and 3 w/o Ti to a powder metallurgy processed quaternary N i-C r-Fe-A l alloy". Materials Science and Engineering A 528 (2011)996-1002

124 R.J. Mitchell, M. Preuss, S.Tin, M.C. Hardy, "The influence o f cooling rate from temperatures above the gamma prime solvus on morphology, mismatch and hardness in advanced polycrystalline nickel-base superalloys". Materials Science and Engineering A 473 (2008) 158-165

125 SHI Ping-fang, Anden Engstrom, Lars Hoglund CHEN Qing, Bo Sundman, John& ren, Mats Hillert, “Computational Thermodynamics and Kinetics in Materials Modelling and Simulations” Prentice Hall June 2005

126 S.H. Fu, J.X. Dong, M.C. Zhang, X.S. Xie Alloy design and development of INCONEL718 type alloy, Materials Science and Engineering A 499 (2009) 215220

127 Z. Guo, N. Saunders, J.P. Schille, A.P. Miodownik, “Modelling of materials properties and behaviour critical to casting simulation”. Materials Science and Engineering A 4 1 3 ^ 1 4 (2005) 4 6 5 ^ 6 9

128 Z. Guo, N. Saunders, J.P. Schille, A.P. Miodownik, “Material properties for process simulation”. Materials Science and Engineering A 499 (2009) 7-13

129 S.L. Chen, F. Zhang, S. Daniel, F.Y. Xie, J. Mater. 55 (2003) 48.130 C.R. Kao, “Creep resistant Mg-Al-Ca alloys: Computational thermodynamics and

experimental investigation”J. Mater. 54 (12) (2002) 44131 S.L. Chen, F. Zhang, S. Daniel, F.Y. Xie, Lead Free Electronic solders- A

Calphad based approach, J. Mater. 55 (2003) 48132 C. Jiang and Z. K. Liu, “Thermodynamic modeling o f the indium-palladium

system,” Metall. Mater. Trans. A, Vol. 33, 2002, 3597-3603133 N. Saunders, M. Fahrmann, C.J. Small, “The Application o f CALPHAD

Calculations to Ni-Based Superalloys'" Superalloys (2000) 803-811.134 N. Saunders, Z. Guo, X. Li, A.P. Miodownik, J.P. Schille, The application of

JMAT Pro Proceedings of the 10th International Symposium on Superalloys. Superalloys (2004) 849-858

135 X.L Meng, Y.X Tong, K.T Lau, W Cai, L.M Zhou, L.C Zhao, Effect o f Cu addition on phase transformation of T i-N i-H f high-temperature shape memory alloys. Materials Letters, Volume 57, Issue 2, December 2002, Pages 452-456L.

136 A. Dobrzanski, M. Krol, T. Tariski, Effect of cooling rate and aluminum contents on the Mg-Al-Zn alloys’ structure and mechanical properties, in L.A. Dobrzanski (ed.) Effect of casting, plastic forming or surface technologies on the structure and properties o f the selected engineering materials. Open Access Library,



Volume 1,2011, pp. 9-54.137 D. Rojas, J. Garcia, O. Prat, G. Sauthoff, A.R. Kaysser-Pyzalla, 9%Cr heat

resistant steels: Alloy design, microstructure evolution and creep response at 650“C Mater.Sci. Eng. A 527 (2010) 3864-3876

138 Young-Sun Kim, Keun-Soo Kim, Chi-Won Hwang, Katsuaki Suganuma, Effect o f composition and cooling rate on microstructure and tensile properties of Sn- Zn-Bi alloys. Journal o f Alloys and Compounds 352 (2003) 237-245.

139 R. Liu, S. Q. Xi, S. Kapoor, X. J. Wu, Investigation o f solidification behavior and associate microstructures of Co-C r-W and Co-Cr-M o alloy systems using DSC technique, J Mater Sci (2010) 45:6225-6234

140 W. Zhai, W.L. Wang, D.L. Geng, B. Wei, A DSC analysis o f thermodynamic properties and solidification characteristics for binary Cu-Sn alloys, Acta Materialia, Volume 60, Issue 19, November 2012, Pages 6518-6527

141 Homam Naffakh Moosavy, Mohammad-Reza Aboutalebi, Seyed Hossein Seyedein, Carlo Mapelli, A solidification model for prediction o f castability in theprecipitation-strengthened nickel-based superalloys. Journal o f Materials Processing Technology 213 (2013) 1875- 1884

142 K. Nurveren, A. Akdogana, W.M. Huang, Evolution of transformation characteristics with heating/cooling rate in NiTi shape memory alloys, Journal of Materials Processing Technology Volume 196, Issues 1-3, 21 January 2008, Pages 129-134

143 Effect o f deep cryogenic treatment on electrode life and microstructure for spot welding hot dip galvanized steel. Materials & Design, Volume 24, Issue 8, December 2003, Pages 687-692, Wu Zhisheng, Shan Ping, Lian Jinrui, Hu Shengsun

144 Boride coatings on steel using shielded metal arc welding electrode: Microstructure and hardness Surface and Coatings Technology, Volume 203, Issue 16, 30 May 2009, Pages 2229-2235, Mehmet Eroglu

145 C. Razim, Metallography of Heat Resistant and High Temperature Alloys, Pract. Metallogr.,Vol 5, May 1968, p 225-241; June 1968, p 299-309

146 G.P. Sabol and R. Stickler, Microstructure o f Nickel-Base Super alloys, Phys. Status Solidi, Vol 35 (No. 1), 1968, p 11-52

147 H.M. Chen, B.F. Hu, H.Y. Li, et al., “Role of TCP phases in Inconel 738” The Chinese Journal of Nonferrous Metals 13 (3) (2003) 554-559

148 B.F. Hu, H.M. Chen, K.Sh. Jin, et al., “Mechanical properties characterization of New Inconel 783L” The Chinese Journal of Nonferrous Metals 14 (6) (2004) 901-906.

149 S.G. Tian, Y. Liu, X.M. Zhao, et al., “Overview of Super alloys in Aerospace applications” Journal of Aeronautical Materials 29 (6) (2009) 33-37.

150 L. Paul, Overview of Ni-Cr-Mo-Ti based powder metallurgy aerospace components”, Powder Metallurgy Superalloys (1988) 27-36.

151 P.W. Keefe, S.O. Mancuso, and G.E. Maurer: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. Mackay, D.L. Anton, T. Kahn, R.D. Kissinger,

R V Center for Cognitive Technologies, R V College of Engineering, Bangalore-S9. Page 128


and D.L. Klarstrom, eds., TMS, Warrendale, PA, pp. 487-96.152 R.C. Reed, M.P. Jackson, and Y.S. Na: Phase Transformation in Ferrous alloys,

Metall. Mater. Trans. A, 1999, vol. 30A, pp. 521-533.153 D. Furrer and H. Fecht: Overview of Ni-based superalloys for Turbine disks,

JOM, 1999, vol. 1, pp. 14-17154 C.Y. Cui, Y.F. Gu, H. Harada, M. Osawa, and A. Sato: Microstructure and yield

strength o f Udiment Li super alloys, Metall. Mater.Trans. A, 40 (2009), 30473050

155 J.B. Forsyth, L.M. d’ Alte da Veiga, The structure o f the ^^-phase Co7Mo6 Acta Crystallogr. 15 (1962) 543-546

156 J. Zhu, H.Q. Ye, Scr. On the role of Mu phase during high temperature creep of a second generation directionally solidified superalloy, Metall. Mater. 24 (1990) 1861-1866.

157 M. Pessah-Simonetti, P. Donnadieu, P. Caron, “Role of Re Containing Nickel based super alloys”, Scr. Metall. Mater. 30 (1994) 1553-1558.

158 R. Canyook, J. Wannasin, S. Wisuthmethangkul, M.C. Flemings,Characterization of the microstructure evolution of a semi-solid metal slurryduring the early stages, Acta Materialia, Volume 60, Issue 8, May 2012, Pages3501-3510

159 H. Xuebing, K. Yan, Z. Huiua, Z. Yun, H. Zhuangqi, Mater. Lett. 36 (1998)210.160 R.A. Stevens, P.E.J. Flewitt, Mater. Sci. Eng. A 50 (1981) 271.161 E. Balikci, A. Raman, R.A. Mirshams, Metall. Mater. Trans. A 28A (1997) 1993.162 WAN Wen-Juan, HAN Guang-Wei, DENG Bo, “Influence O f Solution

Treatment On Microstructure O f AEREX350 Alloy”, Journal o f Iron and Steel Research, International. 2010, 17(3): 67-71

163 Shuangqun Zhao, Xishan Xie, Gaylord D. Smith, Shailesh J. Patel, Microstructural stability and mechanical properties o f a new nickel based superalloy. Materials Science and Engineering A355 (2003) 96-105

164 Gerald A. Zickler, Ronald Schnitzer, Rene Radis, Rainer Hochfellner, Ralf Schweins, Martin Stockinger, Harald Leitner, Microstructure and mechanical properties o f the superalloy ATI Allvac 718Plus™, Materials Science and Engineering A 523 (2009) 295-303

165 R.K. Gupta, Niraj Nayan, G. Nagasireesha b, S.C. Sharma, Development and characterization of Al-Li alloys. Materials Science and Engineering A 420 (2006) 228-234

166 Sushanta Kumar Panigrahi, R. Jayaganthan, Development o f ultrafine grained A l-M g-Si alloy with enhanced strength and ductility. Journal o f Alloys and Compounds Journal of Alloys and Compounds, 2009; 470(l):285-288.

167 Sheldon Winkler, D.D.S., Harold F. Morris, D.D.S., M.S., and John M. Monteiro, Changes in mechanical properties and microstructure following heat treatment of a nickel-chromium base alloy. The Journal o f Prosthetic Dentistry, Volume 52, Number 6, December 1984

168 Special metal corporation ltd. Technical Paper, Prepared by, Edward L. Hibner



and Lewis E. Shoemaker, Special Metals Corporation, Huntington, WV 25705169 Fractography, ASM Handbook, Volume 12, 1987. Prepared by ASM Handbook

Committee.170 Guo-hua Zhang, Jian-Xin Zhang, Bing-Chao Li, Wei Cai, “Characterization of

tensile fracture in heavily alloyed A l-Si piston alloy” Progress in Natural Science: Materials International, 21, (2011), 380-385.

171 ASM Handbook, Volume 9: Metallography and Microstructures, G.F. Vander Voort, editor, p820-859, DOI: 10.1361/asmhba0003737

172 H. Naffakh, M. Shamanian, F. Ashrafizadeh, Dissimilar welding of AISI 310 austenitic stainless steel to nickel-based alloy Inconel 657, Journal o f materials processing technology 209 (2009) 3628-3639

173 G.F. Vander Voort, Metallography: Principles and Practice, McGraw-Hill, 1984; reprinted by ASM International, 1999

174 E.J. Dulis and G.V. Smith, Identification and Mode of Formation and ReSolution o f Sigma Phase in Austenitic Chromium-Nickel Steels, Symposium on the Nature, Occurrence and Effects o f Sigma Phase, STP 110, ASTM, 1951

175 G. Petzow, Metallographic Etching, 2nd ed.,ASM International, 1999176 C.H. Lund and H.J. Wagner, “Identification of Microconstituents in Superalloys,”

DMIC Memorandum 160, Battelle Memorial Institute, Columbus, OH, 15 Nov 1962

177 H.J. Beattie and F.L. Ver Snyder, Microconstituents in High Temperature Alloys, Trans. ASM, Vol 45, 1953, p 397-428

178 J.W. Weeton and R. A. Signorelli, Effect o f Heat Treatment upon Microstructures, Microconstituents, and Hardness o f Wrought Cobalt Base Alloy, Trans. ASM, Vol 47, 1955, p 815-852

179 H. Meisel et al., Metallographic Development of the Structure o f Nickel Based Alloys, Pract. Metallogr., Vol 17, 1980, p 261-272

180 F.R. Morral, Metallography o f Cobalt-Base and Cobalt-Containing Alloys, Pract. Metallogr., Vol 10,1973, p 398^13

181 E. Kohlhaas and A. Fischer, The Metallography of Superalloys, Pract. Metallogr., Vol 8, Jan 1971, p 3-25

182 T.P. Hoar and K.W.J. Bowen, The Electrolytic Separation and Some Properties o f Austenite and Sigma in 18-8-3-1 Chromium-Nickel Molybdenum-Titanium Steel, Trans. ASM, Vol 45, 1953, p 4 4 3 ^ 7 4

183 J.F. Brown et al.. The Extraction of Minor Phases from Austenitic Steel, Metallurgia, Vol 56, Nov 1957, p 215-223

184 K.W. Andrews and H. Hughes, The Isolation, Separation, and Identification of Micro constituents in Steels, in STP 393, ASTM, 1966, p 3-21

185 O.H. Kriege and C.P. Sullivan, The Separation of Gamma Prime from Udimet 700, Trans. ASM, Vol 61, 1968, p 278-282

186 Emel Taban, Jerry E. Gould, John C. Lippold, Dissimilar friction welding of 6061-T6 aluminum and AISI 1018 steel: Properties and microstructural characterization, Materials & Design, Volume 31, Issue 5, May 2010, Pages

R V Center for Cognitive Technologies, It V College of Engineering, Bangalore-59. Page 130


2305-2311187 J. N. Dupont and C. S. Kusko, Technical Note: Martensite Formation in

Austenitic/Ferritic Dissimilar Alloy Welds, welding Journal, FEBRUARY 2007, 51-54

188 H.T. Lee, S.L. Jeng, C.H. Yen, T.Y. Kuo, Dissimilar welding of nickel-based Alloy 690 to SUS 304L with Ti addition. Journal o f Nuclear Materials, 335 (2004)59-69

189 P. Bala Srinivasan, V. Muthupandi, W. Dietzel, V.Sivan, An assessment of impact strength and corrosion behavior o f shielded metal arc welded dissimilar weldments between UNS 31803 and IS 2062 steels. Materials and Design 27(2006)182-191

190 A. Ravi Shankar, S. Suresh Babu, Mohammed Ashfaq, U. Kamachi Mudali, K. Prasad Rao, N. Saibaba, and Baldev Raj,Dissimilar Joining o f Zircaloy-4 to Type 304L Stainless Steel by Friction Welding Process,Joumal o f Materials Engineering and Performance, Volume 18(9) December 2009,1272-127

191 Belloni, G., Caironi, G., Gariboldi, A., Lo Conte, A., di Milano, P., 2001. Effect of microstructural alteration on the creep behaviour and effect o f flaws in 50Cr50Ni-Nb engineering alloy. Trans. SMiRT 16, Paper 1546.

192 Caironi, G., Gariboldi, E., Silva, G., Vedani, G., 1993. Influence o f heat treatments on the mechanical properties and microstructure o f a 50Cr-50Ni niobium containing alloy. J.Phys. IV 03, 289-295.

193 Dupont, J.N., Banovic, W., Marder, A.R., 2003. Microstructural evolution and weldability o f dissimilar welds between a super austenitic stainless steel and nickel-based alloys. Weld. J. 82, 125s-135s.

194 Arivazhagan N, Singh Surendra, Prakash Satya, Reddy GM. Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding. Mater Des 2011; 32: 3036-50.

195 Vijay Ukadgaonker G, Bhat Sunil, Jha M, Deasai PB. Fatigue crack growth towards the weld interface o f alloy and maraging steels. Int J Fatigue 2008;30:689-705.

196 Oates WR, Saitta AM. Welding handbook. Materials and applications, vol. 4. American Welding Society Miami; 1998. p.59.

197 Lundin CD, Khan KK, Yang D. Effect of carbon migration in Cr-Mo weldments on metallurgical structure and mechanical properties. Report No. 1. WRC Bull 1996; 407:1-49.

198 Changheui Jang, Jounghoon Lee, Jong Sung Kim, Tae Eun Jin, Mechanical property variation within Inconel 82/182 dissimilar metal weld between low alloy steel and 316 stainless steel. International Journal o f Pressure Vessels and Piping85 (2008) 635-646

199 Sireesha M, Albert S, Shankar V, Simdaresan S. Microstructural features of dissimilar welds between 316LN austenitic stainless steel and alloy 800. Mater SciEng 2000; A292: 74-82.



200 K. Devendranath Ramkumar, N. Arivazhagan, S. Narayanan, Effect o f filler materials on the performance o f gas tungsten arc welded AISI 304 and Monel 400, Materials and Design 40 (2012) 70-79

201 M. Sireesha, Shaju K. Albert, V. Shankar, S. Sundaresan, A comparative evaluation o f welding consumables for dissimilar welds between 316LN austenitic stainless steel and Alloy 800, Journal o f Nuclear Materials 279 (2000) 65-76.

202 E. Zumelzu, C. Cabezas, Study on welding such dissimilar materials as AISI 304 stainless steel and DHP copper in a sea-water environment: Influence o f weld metals on corrosion. Journal of Materials Processing Technology 57 (1996) 249252

203 E. Taban, E. Deleu, A. Dhooge, and E. Kaluc, Evaluation of Dissimilar Welds between Ferritic Stainless Steel Modified 12% Cr and Carbon Steel S355, Welding Journal, December 2008, Vol. 87

204 Xiu-Bo Liu, Ming Pang, Zhen-Guo Zhang, Wei-Jian Ning, Cai-Yun Zheng, Gang Yua, Characteristics o f deep penetration laser welding o f dissimilar metal Ni- based cast superalloy K418 and alloy steel 42CrMo, Optics and Lasers in Engineering 45 (2007) 929-934

205 I. Magnabosco, P. Ferro, F. Bonollo, L. Amberg, An investigation o f fusion zone microstructures in electron beam welding of copper-stainless steel. Materials Science and Engineering A 424 (2006) 163-173

206 V. Muthupandia, P. Bala Srinivasan, V. Shankar, S.K. Seshadri, S. Sundaresan, Effect o f nickel and nitrogen addition on the microstructure and mechanical properties o f power beam processed duplex stainless steel (UNS 31803) weld metals. Materials Letters 59 (2005) 2305 - 2309

207 Li GF, Congleton, Stress corrosion cracking of a low alloy steel to stainless steel transition weld in PWR primary waters at 292°C, }. Corros Sci 2000; 42:1005.

208 Joseph A, Ramesh AS, Jayakumar T, Murugan N. Pract Metallogr 2001 ;38:667.209 D. Liang, J.W. Sowards, G.S. Frankel, B.T. Alexandrov, J.C. Lippold, Corrosion

resistance of welds in type 304L stainless steel made with a nickel-copper- ruthenium welding consumable,Corrosion Science 52 (2010) 2439-2451

210 Norton J H, Rosenthal D. Stress measurement by X-ray diffraction.Proceedings o f the Society for Experimental Stress Analysis 1944;l(2):73-76.

211 Norton J H, Rosenthal D. Recent contributions to the X-ray method in the field of stress analysis. Proceedings o f the Society for Experimental Stress Analysis 1947;5(l):71-77.

212 Cheng W, Finnic I, Gremaud M, Rosselet A, Streit RD. The compliance method for measurement o f near surface residual stresses— application and validation for surface treatment by laser and shotpeening. ASMfe Journal o f Engineering Material and Technology 1994;116:556-560.

213 Pang HL, Pukas SR. Residual stress measurements in a crusi-form welded joint using hole drilling and strain gauges. Strain 1989; February: 7-14.

214 Muraki T, Bryan JJ, Masubuchi K. Analysis o f thermal stresses and metal

R V Center for Cognitive Technologies, R V College of Engineering, Bangalore-S9. 2


movement during welding. ASME Journal of Engineering Material and Technology 1975;96:81-84.

215 Kuang Z-B, Atluri SN. Temperature field due to a moving heat source: a moving mesh finite element analysis. Trans ASME Journal of Applied Mechanics 1985;52:274-280.

216 Shim Y, Feng Z, Lee S, Kim D, Jaeger J, Papritan JC, Tsai CL. Determination of residual stresses in thick-section weldments. Welding Journal 1992;September:305-l 2.

217 Chidiac SE, Mirza FA, Wilkinson DS. A simplified welding arc model by the finite element method. Computers and Structures 1994;53(5):1235-1241.

218 Josefson BL. Prediction of residual stresses and distortions in welded structures. ASME Journal of Offshore Mechanics and Arctic Engineering 1993;115:52-57.

219 Yang LJ, Xiao ZM. Elastic-plastic modelling o f the residual stress caused by welding. Journal o f Materials Processing Technology 1995;48:589-601.

220 Ueda Y, Fukuda K, Tanigawa M. New measuring method o f three dimensional residual stresses based on theory of inherent strain. Transactions of JWRI 1979;8(2):89-96.

221 Ueda Y, Fukuda K, Kim YC. New measuring method o f axisymmetric three dimensional residual stresses using inherent strains as parameters. ASME Journal o f Engineering Material and Technology 1986;108:328-334.

222 Ueda Y, Ma NX. Measuring method of three-dimensional residual stresses with aid o f distribution fimction of inherent strain. Transactions o f JWRJ 1994;23(l):71-78.

223 S.A.A. Akbari Mousavi, R. Miresmaeili, Experimental and numerical analyses o f residual stress distributions in TIG welding process for 304L stainless steel, journal o f materials processing technology 208 (2008) 383-394

224 Pang, H.L., Pukas, S.R., 1989. Residual stress measurements in a cruciform welded joint using hole drilling and strain gauges.Strain, 7-14.

225 Chang, P.H., Teng, T.L., 2004. Numerical and experimental investigations on the residual stresses of the butt-welded joints. Comp. Mater. Sci. 29, 511-522.

226 Chandra, U., 1985. Determination o f residual stress due to Girth-Butt welds in pipes. ASME J. Press. Vess. Technol. 107, 178-184.

227 Michael E. Robbins, “Overview of Vibratory Stress Relief o f Weldments", Rensselaer at Hartford in Connecticut VSR Conference, December 2004.

228 A. Joseph, Sanjai K. Rai, T. Jayakumar, N. Murugan, International Journal of Pressure Vessels and Piping 82 (2005) 700-705, Evaluation of residual stresses in dissimilar weld joints

229 Spiefi, L., Teichert, G., Schwarzer, R., Behnken, H., Genzel, C., 2005. Rontgenographische Spannungsanalyse, In: Modeme Rontgenbeugung, B. G. Teubner Verlag 30, 5-382

230 B. Chen, X.H.Peng, J.H.Fan, S.T.Sun, A viscous-elastoplastic constitutive equation incorporating phase transformation with the application to the residual stress analysis for welding process, journal o f materials processing technology



205 (2008)316-321231 Omar Hatamleh and Adrian DeWald, An investigation o f the peening effects on

the residual stresses in friction stir welded 2195 and 7075 aluminum alloy joints, Journal of Materials Processing Technology 209 (2009) 4822-4829

232 Improved metallographic preparation o f IN-657 alloy by high temperature oxidation Metallography, Volume 21, Issue 2, May 1988, Pages 217-225 E. Otero, M.C. Merino, A. Pardo, M.V. Biezma

233 Seliger, P. and A. Thomas, High Temperature Behaviour o f Similar and Dissimilar Welded Components of Steel Grade P22 and P91. 5th International Conference on Mechanics and Materials in Design, 2006. Chapter IV: Welds at High Temperature (WELDON) in Design: p. 1-9.

234 Sudha, C., et al.. Microstructure and Microchemistry o f Hard Zone in Dissimilar Weldments of Cr-Mo Steels. Welding Journal (Miami, Fla), 2006. 85(4): p. 71-s- 80-s.

235 Sudha, C., et al., Systematic Study o f Formation o f Soft and Hard Zones in the Dissimilar Weldments o f Cr-Mo Steels. Joumal o f Nuclear Materials, 2002. 302(2-3): p. 193-205.

236 You, Y.Y., et al.. The Study o f Carbon Migration in Dissimilar Welding of the Modified 9cr-lmo Steel. Joumal of Materials Science Letters, 2001. 20: p. 14291432.

237 Heuser, H., et al.. Welding o f Dissimilar Joints o f New Power Plant Steels. Welding in the World, 2008. 52(SPEC. ISS.): p. 217-223.

238 Dissimilar Joining of Zircaloy-4 to Type 304L Stainless Steel by Friction Welding Process., A. Ravi Shankar, S. Suresh Babu, Mohammed Ashfaq, U. Kamachi Mudali, K. Prasad Rao, N. Saibaba, and Baldev Raj 1272-1279, Volume 18(9) December 2009 Joumal o f Materials Engineering and Performance.

239 A. Ravi Shankar, V.R. Raju, M. Narayana Rao, U. Kamachi Mudali,H.S. Khatak, and B. Raj, Corrosion of Zircaloy-4 and Its Welds in Nitric Acid Medium, Corros. Sci., 2007, 49(9), p 3527-3538

240 C.V. Simdaram, Application Related Metallurgy o f Zirconium, Niobium and Beryllium, Trans. Ind. Inst. Metal, 1986, 39(1), p 12-27

241 U. Kamachi Mudali, R.K. Dayal, and J.B. Gnanamoorthy, Corrosion Studies on Materials o f Construction for Spent Nuclear Fuel Reprocessing Plant Equipment, J. Nucl. Mater., 1993,203, p 73-82

242 H. Chauve, J. Decours, R. Demay, M. Pelras, J. Simonnet, and G. Turluer, Zirconium Use for Large Process Components, IAEATECDOC-421, 1987, p 165-192

243 C. Bernard, J.P. Mouroux, J.Decours, R.Demay, and J.Simonnet,Zirconium Made Equipment for the New La Hague Reprocessing Plants, Proceedings o f the International Conference on Fuel Reprocessing and Waste Management, Sendai, Japan, RECOD 91, 2, Apr 4-18, 1991, p 570-575

244 B. Raj and U. Kamachi Mudali, Materials Development and Corrosion Problems



in Nuclear Fuel Reprocessing Plants, Progr. Nucl. Energy, 2006, 48, p 283-313245 Analysis of the drive shaft fracture o f the bucket wheel excavator, Engineering

Failure Analysis, Volume 20, March 2012, Pages 105-117, Mile Savkovic, Milomir Gasic, Dragan Petrovic, Nebojsa Zdravkovic, Radmila Pljakic

246 Welding Consumable Development for a Cryogenic (4 K) Application, BY S. F. Kane, A. L. Farland, T. A. Siewert And C. N. Mccowan,Welding Research Supplement 292-S To 300-S

247 Z. Sun R. Karppi, "The application of electron beam welding for the joining of dissimilar metals; an overview". Journal of Materials Processing Technology 59 (1996) 257 -267

248 M. Sireesha, Shaju K. Albert, V. Shankar, S. Simdaresan, A comparativeevaluation of welding consumables for dissimilar welds between 316LN austenitic stainless steel and Alloy 800, Journal o f Nuclear Materials 279 (2000) 65-76 ■

249 A. K. Bhaduri, G. Srinivasan, T. P. S. Gill and S. L. Mannan, Effect of aging on the microstructure and tensile properties of an alloy 800/9Cr-lMo steel joint, international Journal o f Pressure Vessels and Piping 61 (1995) 25-33

250 R.D. Nicholson, Creep-rupture properties o f austenitic and nickel-based transition joints Metals Technol. 9 (1982) 305

251 W.K.C. Jones, Heat Treatment Effect on 2CrMo Joints Welded with a Nickel- Base Electrode Welding J. 43 (1974) 225s.

252 P.E. Haas, in: Proceedings o f the AWS/EPRI Conference on Joining Dissimilar Metals, Pittsburgh, PA, 1982, pp. 37±47.

253 A.T. Price, in: Proceedings o f the AWS/EPRI Conference on Joining Dissimilar Metals, Pittsburg, PA, 1982, pp. 48± 79.

254 David N. French, A View from the Penthouse: Usefiil Information for the World o f Boilers, a quarterly newsletter, published since the spring o f 1984 by David N. French, Inc., Metallurgists, Northborough, MA Welding Design Fabricat. 1984 (May), 92.

255 R.D. Nicholson, Thermal Considerations in Boiler Tube FailureMet. Technol. 11 (1984) 115

256 Guaytima, G.M. A Study o f Ni-Cu Weld Metals for Joining Austenitic Stainless Steels. Columbus, Ohio : The Ohio State University, 2004. MS Thesis.

257 A century of Monel metal: 1906-2006. Shoemaker, LE and Smith, GD. 9, September 2006, JOM Journal o f the Minerals, Metals and Materials Society, Vol. 58, pp. 22-26.

258 Fout, SL and Wamsley, SD. The effect of iron dilution on strenght of nickel/steel and Monel/steel welds. Goodyear Atomic Corp. Piketon, OH : s.n., 1983.

259 Weld integrity in cladded structures. Sudarshan, TS and Wilson, JH. 11, 1987, Materials Performance, Vol. 26, pp. 17-21.

260 Influence of composition gradients on weld metal creep behavior: an analysis based on laminate composites. Choi, I.D., Matlock, D.K. and Olson, D.L. [ed.]S.A. David and J.M. Vitek. Metals Park, Oh : ASM, 1990. Recent Trends in



Welding Science and Technology, pp. 787-791.261 Weldability studies of modified 70-30 CuNi alloys. Holsberg, PW. 12, 1970,

Welding Journal, Vol. 49, pp. 554-s - 558-s.262 Analysis of the processes o f solidification o f metal and the formation o f porosity

in welds in the gas-shielded electric arc welding o f the monel alloy. Bitinskaya, LN and Kuz'min, GS. 4,1979, Welding Production, Vol. 26, pp. 6-10.

263 Method for welding Monel metal to a corrosion-resisting steel. Rudovskii, YuA, Leleko, LN and Timofeeva, EYa. July 1984, Welding Production, pp. 44-45.

264 A study of weld crackings in nickel and nickel alloys (Report 2). Adachi, M and Miki, R. 12, 1975, Yo setsu Gakkai shi. Vol. 44, pp. 975-981. in Japanese.

265 Pay attention to dissimilar metal welds: guidelines for welding dissimilar metals. Avery, R.E. May 1991, Chemical Engineering Progress.

266 Microstructural development and solidification cracking susceptibility of Cu deposits on steel: Part II - use o f a Ni interlayer. Noecker, FF and DuPont, JN. 2007, Journal of Materials Science, Vol. 42, pp. 510-521.

267 Microstructural development and solidification cracking susceptibility o f Cu deposits on steel: Part I. Noecker, FF and DuPont, JN. 2007, Journal o f Materials Science, Vol. 42, pp. 495-509.

268 Hard facing and dissimilar metal welding o f monel alloy 400 Part 2. Dissimilar metal joints. Scrimgeour, N, et al. March 1975, Welding and Metal Fabrication, pp. 105-107.

269 TTie problem of cracking during welding of monel to stainless steel. Ahmed, J and Husain, S.W. Islamabad, Pakistan : s.n., 1995. Proceedings o f the 4th International Symposium on Advanced Materials, pp. 629-633.

270 William F Smith, “Materials Science and Engineering”, The McGraw Hill publications, 4‘*' Edition, 2008

271 C.Daniel Yesudian and D.G.Harries Samuel, “Materials Science and Metallurgy”, Scitech publication, First Edition, June 2004

272 S.K. Jagadeesh, C.S. Ramesh, J.M. Mallikaijuna, and R.Keshavamurthy: Prediction o f cooling curves during solidification o f Al 6061-SiCp based metal matrix composites using finite element analysisJ.Mater. Process. Technol., 2010,vol.210, pp. 618-23.

273 X. Chen, H. Geng, and Y. Li; Study on the eutectic modification level o f Al-7Si Alloy by computer aided recognition o f thermal analysis cooling curvesMater. Sci. Eng. A, 2006, vol. 419, pp. 283-89

274 L.L.E. Ramrez-Vidaurri, M. Castro-Roman, M. Herrera-Trejo, C.V. Garci, L.Opeza, and E. Almanza Casas: J. Mater. Process. Technol., 2009, vol. 209, pp. 1681-87. ,

275 T. Savaskan and M.S. Turhal: Relationships between cooling rate, copper content and mechanical properties o f monotectoid based Zn-A l-C u alloys Mater. Charact, 2003, vol. 51,pp. 259-70

276 R. Doepp and S. Schwenkel: Prediction of Bum-on and Mould Penetration in Steel Casting Using Simulation Mater. Sci. Eng. A, 2005, vol. 413, pp. 334-38.



277 X. Li, N. Saunders, and A.P. Miodownik; Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3367-73.

278 Z. Guo, N. Saunders, P. Miodownik, and J.-P. Schille: The coarsening kinetics of y' particles in nickel-based alloys Int.J. Microstruct. Mater. Prop., 2009, vol. 4 (2), pp. 20-26.

279 Yang JX, Zheng Q, Sun XF, Guan HR, Hu ZQ. Mater Sci Eng A 2007;A465:100280 G.F. Vander Voort: Metallography and Microstructures, ASM Handbook, vol.

09, ASM International, Materials Park, OH, 2004,pp. 820-59.281 J. Zhang, J. Li, T. Jin, X. Suna, and Z. Hua: Effect o f Mo concentration on creep

properties o f a single crystal nickel-base superalloy Mater. Sci. Eng. A, 2010, vol. 527, pp. 3051-56.

282 S.H. Fu, J.X. Dong, M.C. Zhang, and X.S. Xie: Alloy design and development of INCONEL718 type alloy Mater. Sci. Eng. A, 2009, vol. 499, pp. 215-20.

283 R.J. Mitchell, M. Preuss, S. Tin, and M.C. Hardy; The influence of cooling rate from temperatures above the y' solvus on morphology, mismatch and hardness in advanced polycrystalline nickel-base superalloys Mater. Sci. Eng. A, 2008, vol. 473, pp. 158-65.

284 N.Saunders, In "Superalloys 1996" eds. R.D.Kissinger et al (TMS, Warrendale, 1996), 101 Phase Diagram Calculations for Ni-Based Superalloys

285 H. M. Tawancy, Effect o f Chemical Composition on the Mechanical Properties and Ordering Behavior o f a Ni-Mo Alloy, Scripta metalurgica et Materialia, Vol. 32, No. I 0pp. 1525-1531,1995

286 V.D. Divya, U. Ramamurty, A. Paul, “Topological close packed m phase formation and the determination o f diffusion parameters in the Co-M o system”, Intermetallics 18 (2010) 259-266

287 Z. Guo, N. Saunders, A. P. Miodownik and J-Ph. Schille, Modelling High Temperature Mechanical Properties and Microstructure Evolution in Ni-Based Superalloys

288 L.J. Wanga, L.Y. Sheng, and C.M. Hong: Mater. Des., 2010, vol. 37, pp. 349-55.289 R.P. Reed, P.T. Purtscher, N.J. Simon, Aluminium Alloys for ALS Cryogenic

Tanks: Comparative Measurements of Cryogenic Mechanical Properties o f A l-Li Alloys and AA2219, National Institute o f Standards and Technology NISTR, 1993, p. 3979.

290 J. Glazer, S.L. Verzasconi, R.R. Sawtell, J.W. Morris, Met. Trans. 18A (1987) 1695.

291 Chuanyong Gui, Akihiro Sato, Yuefeng Gu and Hiroshi Harada, 2005. Microstructure and Yield strength of UDIMET 720 Li alloyed with Co-16.9 wt pet Ti. Metall Mater Trans A 36, 2921-2927.

292 G.J., Brentrup, J. N., Dupont, Microstructural Evolution and Weldability of Dissimilar Welds between a Super Austenitic Stainless Steel and Nickel Base Alloys Weld J, 92(2013) 72-79

293 N., Wang, S., Mokadem, M., Rappaz, W., Kurz, 2004. Solidification cracking of superalloy single- and bi-crystals. Acta Mater. 52. 3173-3182.



294 J. R., Nataraj, M., Krishna,H. N., Narasimha Murthy, C. S., Prasad, V. T., Bhanukiran and S. C., Sharma, 2013. Synthesis and Characterization o f Novel Chromium-Free Nickel Alloy Electrode Materials. Metall Mater Trans A. 44(7), 3271-3280.

295 A., Celik, A., Asaran, 1999. Mechanical and Structural Properties of Similar and Dissimilar Steel Joints. Mater Charact. 43, 311-318.

296 D. Akbari, I. Sattari-Far, "Effect o f the welding heat input on residual stresses in butt-welds o f dissimilar pipe joints". International Journal o f Pressure Vessels and Piping 86 (2009) 769-776

297 Bouhelier C, Barbarin P,Deville J P and Miege B, “Viberatory stress relief of welded parts”, Mechanical relaxation o f residual stresses, ASTM STP 993, L Mordfm Ed, American society o f Testing Materials, Philadelphia, 1988, pp 58-71

298 Li Yanjiang, Wang Juan, Chen Maoai And Shen Xiaoqin, "Finite element analysis o f residual stress in the welded zone o f a high strength steel", Bull.Mater.Sci.,Vol.27, No.2, April 2004,pp.l27 - 132.1ndian Academy of Sciences

299 Hwa Teng Lee., Chun J., Jia Lin W ul., “Numerical and experimental investigation into effect of temperature field on sensitization o f Alloy 690 butt welds fabricated by gas tungsten arc welding and laser beam welding,” Journal of material processing technology. Vol. 210, pp. 1636-1645, 2010

300 Farag Soul., “Numerical Simulation of Residual Stress and Strain Behavior After Temperature Modification,” INTECH science paper, Vol.10, pp. 217-245, 2012

301 G.S.Frankel and J.C.Lippold, “Chromium-Free welding consumable”, US Patent 7,425,229, issued 9/16/2008

302 Yeong Ho Kim, G.S.Frankel, and J.C.Lippold.2006. Development of a chromium free consumable for austenitic steels: Effect o f Dilution and the behavior o f Bead on plate welds, ISIJ International, 46,698-704

303 Y.H.Kim, G.S.Frankel and J.C.Lippold, 2006. Cr-Free consumables for welding stainless steel. Part 2: Optimization o f alloy composition based on corrosion behavior. Corrosion, 62(2): 109-120

304 Y.H.KIM, G.S.FRANKEL, G GAUYTIMA AND J.C.LIPPOLD, 2006. Cr-Free consumables for welding stainless steel. Part l:Monel Filler Metal, Corrosion, 62(l):44-53

305 J.W.SOWARDS, D.LIANG, B.T. ALEXANDROV, G.S.FRANKEL AND J.C.LIPPOLD, A New chromium-free Welding Consumable for joining austenite stainless steels, welding journal; Apr 2011, Vol.90, Issue 4, p63.s


References 1 P. G. Charalambides, J. Lund, A. G. Evans and R. M. ...

Documents

Transcript of References 1 P. G. Charalambides, J. Lund, A. G. Evans and R. M. ...