Dies For Pressure Die by Rajvin Precision Pressing Company Pune
ref: 7071 Company Profile Packaged High Pressure … Calder Profile.pdf · Company Profile...
2
Company Profile Introduction At Calder, we design and manufacture high pressure pumping equipment for a range of industries including the oil & gas, petrochemical and industrial sectors. Our current annual turnover is in excess of $20 million and, since the foundation of our company in 1981, we have supplied more than $200 million of pumping equipment to many varied industries worldwide. Accreditations and memberships: • ISO 9001, ISO 14001 and OHSAS 18001 standards • Achilles & First Point Assessment • Investors in People registered company • Member of the UK Water Jetting Association • Member of British Safety Council Activity & Industry Our primary activity is the design, manufacture, supply, commissioning and servicing of industrial and hazardous area, high pressure reciprocating plunger pump, rotary screw compressor, and vacuum packages. Applications Oil & Gas Process • Methanol & Glycol (MEG) Injection • Chemical Injection • Scale Squeeze • Condensate Injection • Glycol HPUs • Water Soluble Hydraulics • Desalination Reverse Osmosis • Glycol Circulation • Power Fluid Pumps • Produced and Sea-water Injection Well Service & Drilling • Acidising • Cementing • Coil Tubing • Cuttings Re-injection/Waste Disposal • Fracturing Pumps & Well Kill Pumps • Mud Pumps • Pipeline Fill and Pressure Test High Pressure Water Jetting • High Pressure Water Blast 4000 bar (58,000 psi) • Abrasive Cutting, Coating Removal etc. • Full range of high pressure water-jetting accessories Packages that Stand the Test of Time We manufacture a range of standard packages/systems for specific applications. Our project engineering teams can also work with you to develop bespoke high pressure pump, compressor and vacuum packages that meet your particular needs and project specification. Our Competence Based in Worcester, England our professional team of engineers understand the demands of the industries we serve and are ready to assist with your enquiry. Fluid Types Calder equipment will pump almost any liquid ranging from potable water to liquid butane, light hydrocarbon, condensates, and heavy mud and drill cuttings. If zero leakage is your requirement, we can incorporate the appropriate packing design with monitoring systems. For highly corrosive duties we offer a wide range of wetted parts, which include super duplex stainless steel, 316 SS and nickel aluminium bronze. Zero Emissions Our range of zero emissions process pumps are Clean Air Certified to VDI 2440. Pressures Pressure ranges up to 4000 bar (58,000 psi). Diesel Powered Diesel pump packages suitable for use in ATEX Group II, Cat 3, Gas Group B, T3 hazardous environments are fully compliant with current North Sea legislation. Our diesel powered pump units are fitted with ‘yellow alert’ as standard and comply with the new requirement for ‘unmanned operation’. Electric Powered Electric powered pump units are suitable for operation in ATEX Group II, Cat 2, Gas Group B, T3 hazardous areas. Variable Speed Drives Our variable speed drive units are available with remote control facilities with full monitoring of flow, pressure etc. AC or DC up to 1800 kW (2400HP). Noise Calder can incorporate your pump package into an acoustic enclosure to comply with your specific requirements. Water-jetting Accessories A comprehensive range of water-jetting accessories is available from a single source supplier, including PPE, nozzles, guns, hoses and much more… Reference List Calder’s extensive reference list includes most major oil & gas companies around the world. Contact Information Calder is very well represented in the Middle East with partners in most countries. For the latest information on our product range or contact information for your nearest agent please contact us or visit our website: Telephone +44 (0) 1905 759090 Fax +44 (0) 1905 759091 Email [email protected] Website www.calderltd.com Address Prescott Drive, Warndon, Worcester, WR4 9NE, United Kingdom Packaged High Pressure Solutions Company Profile Introduction At Calder, we design and manufacture high pressure pumping equipment for a range of industries including the oil & gas, petrochemical and industrial sectors. Our current annual turnover is in excess of $20 million and, since the foundation of our company in 1981, we have supplied more than $200 million of pumping equipment to many varied industries worldwide. Accreditations and memberships: • ISO 9001, ISO 14001 and OHSAS 18001 standards • Achilles & First Point Assessment • Investors in People registered company • Member of the UK Water Jetting Association • Member of British Safety Council Activity & Industry Our primary activity is the design, manufacture, supply, commissioning and servicing of industrial and hazardous area, high pressure reciprocating plunger pump, rotary screw compressor, and vacuum packages. Applications Oil & Gas Process • Methanol & Glycol (MEG) Injection • Chemical Injection • Scale Squeeze • Condensate Injection • Glycol HPUs • Water Soluble Hydraulics • Desalination Reverse Osmosis • Glycol Circulation • Power Fluid Pumps • Produced and Sea-water Injection Well Service & Drilling • Acidising • Cementing • Coil Tubing • Cuttings Re-injection/Waste Disposal • Fracturing Pumps & Well Kill Pumps • Mud Pumps • Pipeline Fill and Pressure Test High Pressure Water Jetting • High Pressure Water Blast 4000 bar (58,000 psi) • Abrasive Cutting, Coating Removal etc. • Full range of high pressure water-jetting accessories Packages that Stand the Test of Time We manufacture a range of standard packages/systems for specific applications. Our project engineering teams can also work with you to develop bespoke high pressure pump, compressor and vacuum packages that meet your particular needs and project specification. Our Competence Based in Worcester, England our professional team of engineers understand the demands of the industries we serve and are ready to assist with your enquiry. Fluid Types Calder equipment will pump almost any liquid ranging from potable water to liquid butane, light hydrocarbon, condensates, and heavy mud and drill cuttings. If zero leakage is your requirement, we can incorporate the appropriate packing design with monitoring systems. For highly corrosive duties we offer a wide range of wetted parts, which include super duplex stainless steel, 316 SS and nickel aluminium bronze. Zero Emissions Our range of zero emissions process pumps are Clean Air Certified to VDI 2440. Pressures Pressure ranges up to 4000 bar (58,000 psi). Diesel Powered Diesel pump packages suitable for use in ATEX Group II, Cat 3, Gas Group B, T3 hazardous environments are fully compliant with current North Sea legislation. Our diesel powered pump units are fitted with ‘yellow alert’ as standard and comply with the new requirement for ‘unmanned operation’. Electric Powered Electric powered pump units are suitable for operation in ATEX Group II, Cat 2, Gas Group B, T3 hazardous areas. Variable Speed Drives Our variable speed drive units are available with remote control facilities with full monitoring of flow, pressure etc. AC or DC up to 1800 kW (2400HP). Noise Calder can incorporate your pump package into an acoustic enclosure to comply with your specific requirements. Water-jetting Accessories A comprehensive range of water-jetting accessories is available from a single source supplier, including PPE, nozzles, guns, hoses and much more… Reference List Calder’s extensive reference list includes most major oil & gas companies around the world. Contact Information Calder is very well represented in the Middle East with partners in most countries. For the latest information on our product range or contact information for your nearest agent please contact us or visit our website: Telephone +44 (0) 1905 759090 Fax +44 (0) 1905 759091 Email [email protected] Website www.calderltd.com Address Prescott Drive, Warndon, Worcester, WR4 9NE, United Kingdom Packaged High Pressure Solutions ref: 7071
Transcript of ref: 7071 Company Profile Packaged High Pressure … Calder Profile.pdf · Company Profile...
Company Profile
IntroductionAt Calder, we design and manufacture high pressure pumping equipment for a range of industries including the oil & gas, petrochemical and industrial sectors. Our current annual turnover is in excess of $20 million and, since the foundation of our company in 1981, we have supplied more than $200 million of pumping equipment to many varied industries worldwide.
Accreditations and memberships:• ISO 9001, ISO 14001 and OHSAS 18001 standards• Achilles & First Point Assessment• Investors in People registered company• Member of the UK Water Jetting Association• Member of British Safety Council
Activity & Industry Our primary activity is the design, manufacture, supply, commissioning and servicing of industrial and hazardous area, high pressure reciprocating plunger pump, rotary screw compressor, and vacuum packages.
ApplicationsOil & Gas Process• Methanol & Glycol (MEG) Injection • Chemical Injection • Scale Squeeze • Condensate Injection • Glycol HPUs • Water Soluble Hydraulics • Desalination Reverse Osmosis • Glycol Circulation • Power Fluid Pumps • Produced and Sea-water Injection Well Service & Drilling • Acidising • Cementing • Coil Tubing • Cuttings Re-injection/Waste Disposal • Fracturing Pumps & Well Kill Pumps • Mud Pumps • Pipeline Fill and Pressure Test
High Pressure Water Jetting• High Pressure Water Blast 4000 bar (58,000 psi) • Abrasive Cutting, Coating Removal etc.• Full range of high pressure water-jetting accessories
Packages that Stand the Test of Time We manufacture a range of standard packages/systems for specific applications. Our project engineering teams can also work with you to develop bespoke high pressure pump, compressor and vacuum packages that meet your particular needs and project specification.
Our CompetenceBased in Worcester, England our professional team of engineers understand the demands of the industries we serve and are ready to assist with your enquiry.
Fluid TypesCalder equipment will pump almost any liquid ranging from potable water to liquid butane, light hydrocarbon, condensates, and heavy mud and drill cuttings. If zero leakage is your requirement, we can incorporate the appropriate packing design with monitoring systems. For highly corrosive duties we offer a wide range of wetted parts, which include super duplex stainless steel, 316 SS and nickel aluminium bronze.
Zero Emissions Our range of zero emissions process pumps are Clean Air Certified to VDI 2440.
PressuresPressure ranges up to 4000 bar (58,000 psi). Diesel Powered Diesel pump packages suitable for use in ATEX Group II, Cat 3, Gas Group B, T3 hazardous environments are fully compliant with current North Sea legislation. Our diesel powered pump units are fitted with ‘yellow alert’ as standard and comply with the new requirement for ‘unmanned operation’.
Electric Powered Electric powered pump units are suitable for operation in ATEX Group II, Cat 2, Gas Group B, T3 hazardous areas.
Variable Speed Drives Our variable speed drive units are available with remote control facilities with full monitoring of flow, pressure etc. AC or DC up to 1800 kW (2400HP).
NoiseCalder can incorporate your pump package into an acoustic enclosure to comply with your specific requirements.
Water-jetting Accessories A comprehensive range of water-jetting accessories is available from a single source supplier, including PPE, nozzles, guns, hoses and much more…
Reference List Calder’s extensive reference list includes most major oil & gas companies around the world.
Contact Information Calder is very well represented in the Middle East with partners in most countries. For the latest information on our product range or contact information for your nearest agent please contact us or visit our website:
Telephone +44 (0) 1905 759090Fax +44 (0) 1905 759091Email [email protected] www.calderltd.comAddress Prescott Drive, Warndon, Worcester, WR4 9NE, United Kingdom
Packaged High Pressure Solutions
ref:
7071
Company Profile
IntroductionAt Calder, we design and manufacture high pressure pumping equipment for a range of industries including the oil & gas, petrochemical and industrial sectors. Our current annual turnover is in excess of $20 million and, since the foundation of our company in 1981, we have supplied more than $200 million of pumping equipment to many varied industries worldwide.
Accreditations and memberships:• ISO 9001, ISO 14001 and OHSAS 18001 standards• Achilles & First Point Assessment• Investors in People registered company• Member of the UK Water Jetting Association• Member of British Safety Council
Activity & Industry Our primary activity is the design, manufacture, supply, commissioning and servicing of industrial and hazardous area, high pressure reciprocating plunger pump, rotary screw compressor, and vacuum packages.
ApplicationsOil & Gas Process• Methanol & Glycol (MEG) Injection • Chemical Injection • Scale Squeeze • Condensate Injection • Glycol HPUs • Water Soluble Hydraulics • Desalination Reverse Osmosis • Glycol Circulation • Power Fluid Pumps • Produced and Sea-water Injection Well Service & Drilling • Acidising • Cementing • Coil Tubing • Cuttings Re-injection/Waste Disposal • Fracturing Pumps & Well Kill Pumps • Mud Pumps • Pipeline Fill and Pressure Test
High Pressure Water Jetting• High Pressure Water Blast 4000 bar (58,000 psi) • Abrasive Cutting, Coating Removal etc.• Full range of high pressure water-jetting accessories
Packages that Stand the Test of Time We manufacture a range of standard packages/systems for specific applications. Our project engineering teams can also work with you to develop bespoke high pressure pump, compressor and vacuum packages that meet your particular needs and project specification.
Our CompetenceBased in Worcester, England our professional team of engineers understand the demands of the industries we serve and are ready to assist with your enquiry.
Fluid TypesCalder equipment will pump almost any liquid ranging from potable water to liquid butane, light hydrocarbon, condensates, and heavy mud and drill cuttings. If zero leakage is your requirement, we can incorporate the appropriate packing design with monitoring systems. For highly corrosive duties we offer a wide range of wetted parts, which include super duplex stainless steel, 316 SS and nickel aluminium bronze.
Zero Emissions Our range of zero emissions process pumps are Clean Air Certified to VDI 2440.
PressuresPressure ranges up to 4000 bar (58,000 psi). Diesel Powered Diesel pump packages suitable for use in ATEX Group II, Cat 3, Gas Group B, T3 hazardous environments are fully compliant with current North Sea legislation. Our diesel powered pump units are fitted with ‘yellow alert’ as standard and comply with the new requirement for ‘unmanned operation’.
Electric Powered Electric powered pump units are suitable for operation in ATEX Group II, Cat 2, Gas Group B, T3 hazardous areas.
Variable Speed Drives Our variable speed drive units are available with remote control facilities with full monitoring of flow, pressure etc. AC or DC up to 1800 kW (2400HP).
NoiseCalder can incorporate your pump package into an acoustic enclosure to comply with your specific requirements.
Water-jetting Accessories A comprehensive range of water-jetting accessories is available from a single source supplier, including PPE, nozzles, guns, hoses and much more…
Reference List Calder’s extensive reference list includes most major oil & gas companies around the world.
Contact Information Calder is very well represented in the Middle East with partners in most countries. For the latest information on our product range or contact information for your nearest agent please contact us or visit our website:
Telephone +44 (0) 1905 759090Fax +44 (0) 1905 759091Email [email protected] www.calderltd.comAddress Prescott Drive, Warndon, Worcester, WR4 9NE, United Kingdom
Packaged High Pressure Solutions
ref:
7071
ref:
7071 Calder Location
INNOVATION THROUGH EXPERIENCE
Calder LtdPrescott DriveWarndonWorcesterWR4 9NEUnited Kingdom
web : www.calderltd.com email : [email protected] tel : +44 (0) 1905 759090 fax : +44 (0) 1905 759091
Calder Ltd reserve the right to alter specifications and data to incorporate improvements in design.
Ideally situated for both Heathrow and Birmingham international airports, Calder’s Worcester premises are a modern facility where our equipment is designed, built and tested by our skilled workforce.
Over 7,500 m² manufacturing, assembly, storage and office space.
Prescott Drive
Calder LtdPrescott DriveWarndonWorcesterWR4 9NEUnited Kingdom
www.calderltd.com
EXITJunction 6 M5 and follow signs for B4639
