Reece | Plumbing | Tools and Hardware | Rothenberger ... · PDF filetel: toll free 1800 186...

TEL:� TOLL�FREE�1800�186�657FAX:�TOLL�FREE�1800�286�657

1

ListPrice$ ListPrice$ ProdProduct PartNo. Size excl.GST incl.GST Grp

PRODUCT�PROGRAM�2010

www.rothenberger.com.au


A�Reputation�Built�on�SuccessWith 60 years experience in the manufacture and supply of top quality tools and machines for the pipe work trades, the ROTHENBERGER product programme continues to set new standards as the brand leader throughout the world.

Active liaison with major pipe, tube and fitting manufacturers together with detailed attention to the modern needs of contractors and tradesmen continues to result in the ever growing ROTHENBERGER range which is the most extensive and comprehensive in it’s field.

The�Benchmark�for�QualityOngoing and major investment in design, research and development and the latest CNC production techniques have resulted in the world beating ROTHENBERGER programme of advanced products for the installation, maintenance, inspection and testing of all types of pipe and tube above and below ground.

The ROTHENBERGER group dedication to maintaining the highest standards of quality control is further guaranteed with the prestigious Quality Assurance Certification ISO 9000/9001/9002 covering aspects of production from raw materials to finished products, personnel training, logistics and sales/after sales service.

The�Best�Value�BrandThe first priority with all ROTHENBERGER products is premium quality with price only a secondary consideration. Only the best quality raw materials are transformed into rugged, durable tools incorporating many unique design features for easy, comfortable use and an exceptionally long working life. It is little wonder that millions of satisfied users throughout the world consider ROTHENBERGER tools to be the best value at any price!

Environmental�ResponsibilityThe achievement of ISO 14001 reflects the ROTHENBERGER group sense of responsibility to ensure that our factories production and other operations have the minimum possible impact on the environment for the health of our customers and future generations.

InnovationIn addition to the ongoing improvement of existing and traditional products, ROTHENBERGER continue to develop brand new and often unique tools, machines and other technically advanced equipment.

All new products are designed and fully tested to meet the latest requirements in handling new tube materials (and installation techniques) or provide time and labour saving solutions in conjunction with traditional pipe fitting, testing, inspection and maintenance operations.

Progressive�CommunicationIn line with the ROTHENBERGER commitment to provide first class customer support and the very best advice prior to product selection and purchase, ROTHENBERGER personnel carry out thousands of informative demonstrations and Trade Counter Promotions around the country and across the globe. In addition ROTHENBERGER group of companies are involved in all major trade fairs and exhibitions to communicate new product developments designed to meet the challenge of changing methods and new pipe and tube materials.

Stockist�SupportROTHENBERGER stockists and distributors have a wide range of facilities available to them aimed at creating customer awareness and improved sales. Modern point of sales displays are installed and maintained or tailor made for merchandising within corporate display schemes. Product familiarisation with merchant sales staff is available. Technical information and rapid response to orders are available on a TOLL-FREE line operating 8:00am to 5:30pm, every working day of the year.

ROTHENBERGER�WorldwideROTHENBERGER group products are available from group companies or associated non-group trading partners around the world and local demonstrations and other customer support facilities can be arranged at most locations at short notice no matter where you are working.

Warranty�ClaimAll ROTHENBERGER products are covered by the same 12 month guarantee (Rocam Mobile cameras covered by 3 year warranty).

At ROTHENBERGER, we manufacture top quality tools to the strictest quality control systems from raw material to the finished product conforming to ISO 9001.

We are naturally very keen to repair any of our products that have been found to be defective in material or workmanship. However, we cannot, and will not, cover our products suffering normal wear and tear, accidental damage, misuse, abuse or those that are simply worn out after providing a long and reliable service.

We reserve the right to repair any product, or replace defective parts only, rather than replace the complete article.

ROTHENBERGER stockists and distributors are not authorised to replace products, without prior approval.

Product�Return�GuideTo arrange the return for inspection under warranty and/or service of any article please contact ROTHENBERGER Customer Services on

(02)�9899-7577�or�TOLL�FREE�1800�186�657

All warranty inspection goods are logged within the ROTHENBERGER computer system and issued with an individual GRA�Number, which should be marked on the packaging when the item is returned. This will ensure rapid action.

ROTHENBERGER�–�SETTING�NEW�STANDARDSThe�World�of�Pipetool�Technologies


3

CONTENTSFITTING�TOOLS� 4

STEEL�PIPE�TOOLS� 13

PIPE�AND�INSTALLATION�TOOLS� 19

TESTING,�MEASURING�&�

FREEZING�EQUIPMENT�29

SOLDERING�&�WELDING�EQUIPMENT� 33

PLASTICS� 37

PIPE�&�DRAIN�CLEANING�&�INSPECTION� 41

DIAMOND�DRILLING� 54


4


Tube Expanding

*Set shown with extra heads

ROCAM®�Expander�Power�TorqueFor�expanding,�reducing�and�calibrating�tubes�made�of:Soft and hard copper dia. 8mm - 42mm, 5/16 - 1

3/4” max. wall thickness 1.6mmSoft aluminium dia. 8mm - 28mm, 5/16 - 1

1/8” max. wall thickness 1.6mmSoft precision steel dia. 8mm - 28mm, 5/16 - 1

1/8” max. wall thickness 1.6mmSoft stainless steel dia. 8mm - 22mm, 5/16 -

7/8” max. wall thickness 1.0mm

For efficient, fitting-free tube installation in sanitary, heating, gas,refrigeration and climate control systems.

Key�features• Steel adaptor:��Tough�and�wear-resistant• Automatic pin retraction:��Faster�operation• KSO Fine Adjustment screw:��Exact�adjustment�of�the��capillary�gap• High strength, forged aluminium body:��Lower�weight,�optimum�handling• Ergonomic handles:��Non�slip,�no�jamming�of�fingers• Longer lever arms:��Reduces�effort�required�and�increases��work�space

� ListPrice$ ListPrice$ ProdPartNo. excl.GST incl.GST Grp

012000� � � B

EPT®-Technology�(Enclosed�Power�Transmission)• Concealed bent lever:��Protection�against�dirt��Protection�against�mechanical��damage• Optimised force transmission design:��Ergonomic�design�maximises�force�created��in�relation�to�effort�required�by�the�user��More�torque�with�less�effort

PowEr TorquE TuBE EXPANDEr SETS

Now with new and improved Power Torque handle.Precision capillary socket forming tools for the production of end feed soldered joints in coppertube without fittings. All sets complete with steel case and deburrer.

Rocam Expander Set – Refrigeration� 012321� Set� � � B1/2", 5/8", 3/4", 7/8" O.D.

Rocam Expander Set – Refrigeration 012324 Set � � B1/2", 5/8", 7/8", 11/8" O.D.

Rocam Expander Set – Plumbing 012335 Set � � B1/2", 3/4", 1" O.D.

Rocam Expander Set – (New Zealand) 012327 Set � � B15, 22, 28mm


5


Tube ExpandingStandard�Riveted�Expander�HeadsLong�life�riveted�heads�produce�an�even�expansion�for�precision�capillary�joints�in�copper�tube. Key�features

• Eliminates costs in the purchase and storage of fittings• 50% less labour costs• 50% less soldering saves material and energy• Converts scrap tubes into fittings, saves resources• Increases safety by reducing number of joints• Know-how from the pioneer of tube expansion techniques and the leading manufacturer of expanders for more than 35 years

• Hardened segments:��Tough�and�long-lasting

• 6 rivets and guide channels:��Guarantees�perfect��centering,�and��uniform�capillary�gaps

• Smooth-running screw thread: Quick�changing��of�heads

• Extra long segments:��Tube�socket�depths��in�accordance��with�tough�German��standards

• Bevelled segment ends:��Allows�recalibration�of��non-round�tubes�and�fittings

TUBE�EXPANDER�HEADS� 11052 3/8" O.D. � � B 11053 1/2" O.D. � � B 11054 5/8" O.D. � � B� 11055 3/4" O.D. � � B 11056 7/8" O.D. � � B 11057 1" O.D. � � B 11058 11/8" O.D. � � B 11059 11/4" O.D. � � B 11035* 13/8" O.D. � � B 11038 11/2" O.D. � � B 11062 15/8" O.D. � � B� 11364* 2” O.D. � � B� *11035 will also suit NZ 35mm *11007 must be used with 2” Expander Head

� 11007 2” adaptor � � B

11008 8mm (NZ) � � B 11010 10mm (NZ) � � B 11012 12mm (NZ) � � B 11015 15mm (NZ) � � B 11022 22mm (NZ) � � B 11028 28mm (NZ) � � B� 11035� 35mm (NZ) � � B� 11042� 42mm (NZ) � � B

INDUSTRIAL�TUBE�EXPANDER�TOOLS

For precision capillary joints in larger sizecopper tube (Note: does not include ratchethandle as standard).

Model A1R – Refrigeration� 11078� Set � � D13/8",15/8",21/8",25/8", 31/8", 41/8"

Model A1 – Plumbing� 11093� Set � � D11/4", 11/2", 2", 21/4", 3", 4"

Ratchet Handle (optional)� 27181� 3/4" square drive� � � D


6


Tee-Extractors

Precise drilling without the need fora centre punch - Drill stop preventsoversizing or damage to tube wall

Insert the extractor hook into thedrilled hole and screw the bell firmlyto the tube wall

Turn the extractor with the ratchet tothe left, at the same time make sureit’s firmly in place

After extraction, set the correct insertdepth for the tube dia. with the campincer

Tube�Extractor�SetsFor�producing�branches�or�tees�on�tubes�made�of�soft,�semi-hard�and�hard�copper,�aluminium�and�precision�steel,�with�maximum�wall�thickness�2.5mm.

Sets consist of: • Tube Extractor heads• Ratchet handle (22081)• Cam pincer (22080)• Unidrill Automatic 42 (21575)• Steel carry case

Key�features• Extractions even on installed tubes possible:��Saves�time�and�facilitates�installation• Producing branches on tubes:��Saves�the�use�of�T-pieces• Compact design:��Suitable�for�making�branches�even�in�tight�places

TUBE�EXTRACTOR�SETS

Precision capillary tee forming tool for theproduction of end-feed solder joints incopper tube in almost any position, without fittings.All sets are complete with: steel case, UnidrillAutomatic 42, cam pincers, & ratchet handle.

Extractor Set – Plumbing 1/2”, 3/4”, 1”� 22135� Set � � BExtractor Set – Refrigeration 1/2”, 5/8”, 3/4”, 7/8” 22121� Set � � BExtractor Set – Refrigeration 1/2”, 5/8”, 7/8”, 11/8” 22124� Set � � BExtractor Set – New Zealand 15, 22, 28mm� 22127� Set � � B

Unidrill Automatic 42mm (as a spare part)� 21575� 3/8" - 15/8" � � BRatchet Handle (as a spare part)� 22081� 11mm hex drive� � � BCam Pincer (as a spare part) 22080� � � � B�

• Extractor cam pincer:��For�fixed�depth�insertion�depth

• Cam pincer for fixing insertion depth: ��Optimum�positioning

• Professional Tee-extraction:��Optimum�capillary�gaps

• Special screw thread:��Reduces�effort�required

• Simple, fast and economical operation:��E.g.�only�21�seconds�for�a��tee-extraction�of�dia.�18mm

• UNIDRILL Automatic 42:��Exact�drilling

*Set shown with extra heads


7


*Please note: 2” extractor head will not work with the unidrill and ratchet handle from the kit. You must use a 30mm hole-saw and 3/4” ratchet drive handle.

Tee-Extractors

TUBE�EXTRACTOR�HEADS

Long life extractor heads for precision 22060� 3/8" O.D. � � Bcapillary joints in copper tube 22061� 1/2" O.D. � � B 22016� 5/8" O.D. � � B 22062� 3/4" O.D. � � B 22063� 7/8" O.D. � � B 22064� 1" O.D. � � B 22065� 11/8" O.D. � � B 22066� 11/4" O.D. � � B 22035� 13/8" O.D. � � B 22038� 11/2" O.D. � � B 22068� 15/8" O.D. � � B� �22050*� 2” O.D. � � B

Ratchet Handle (for 2” Extractor Head)� 27181�� 3/4" square drive � � D

COMBI�KIT

Kit comprises Rocam Expander with 11195� 1/2", 3/4", 1" � � Briveted expander heads. Tee-extractor ratchet, Unidrill automatic 28, cam pincers all in steel carrying case

Unidrill Automatic 28mm (as a spare part)� 21583� 3/8" - 11/8"� � � B

Tube�Extractor�HeadsForged�hooks,�specially�polished,�tempered�and�burnished�nickel-plated�bells. Key�features

• Uniform and proper material manipulation without scratches or burrs• Professional tee-extraction with optimum capillary gap

• Special trapezoid thread: ��Optimum�force�transmission

• Double ‘V’ block:��Accurate�and�firm�positioning,��for�exact�90°�branches

• Special hook design:��Easy�insertion�into�drilled�hole

• Forged and tempered extractor hooks with special polish:��Burr-free�extraction


8


Flaring Tools

UNIVERSAL�FLARING�TOOL

Unique self-adjusting flaring tool for flaring 222601� 3/16” - 5/8”�O.D.� � � Aany tube size from 3/16" to 5/8" O.D. Compact and easy to use, with innovative tube holding mechanism.

STANDARD�FLARING�TOOLFor 45° single flares on copper, brass,aluminium and precision steel tube up to 1mm in wall thickness.Hardened flare cone for high quality flares.Self-centering clamp. Tubing will not slip.

DOUBLE�FLARING�TOOL�KITFor 45° single or double flares on copper,brass, aluminium and precision steel tube up to 1mm in wall thickness. The Kit includes a Standard Flaring Tool (26051), 7 double flare attachmentsand a No.30 Pro Tube Cutter (71019) complete in case

Also suitable for hydraulic / pneumatic and automotive applications.

ROFLARE�COMPACT�FLARING�TOOLPrecision production of 45° flares on copper, brass, aluminium and soft steel tubing. Hardened clamp jaws and cone. Automatic self-centering

Single action ROFLARE tool only� 26036� 3/16",1/4",5/16”,� � � A

�� 3/8",1/2",5/8"O.D.

Double action ROFLARE tool only� 26033� 3/16",1/4",5/16”,� � � A

�� 3/8",1/2",5/8"O.D.

Double Flare Adaptor (for use with 26033) 26034� 3/16",1/4",5/16”,� � � A

� � 3/8",1/2"O.D.��

PRO�QUALITY�FLARING�TOOL�(R410A�compliant)For the production of 45° precision single flares.� R222402� 1/8",3/16",1/4",5/16”, � � AHeavy-duty handle and spindle with 3/8", 1/2", 5/8", 3/4" O.D.�� eccentric flaring cone and roller bearings, for smooth and easy flaring of heavy gauge and high pressure gas lines.Kit includes case and adaptor for the tool to beused with a ratchet.

26052��3/16",1/4",5/16",3/8", � ��A 7/16",1/2",5/8"O.D.

26051��3/16",1/4",5/16",3/8", � ��A 7/16",1/2",5/8"O.D.


9


Bending ToolsOne-Hand�Tube�BenderFor�exact,�one-hand�bending�up�to�90°�of�tubes�made�of:

Soft copper tube dia. 1/4”, 5/16”, 3/8”, 1/2”Aluminium tube dia. 1/4”, 5/16”, 3/8”, 1/2”Soft steel tube dia. 1/4”, 5/16”, 3/8”, 1/2”

Key�features• Specially designed for small diameter tube:� Suitable�for�use�in�refrigeration,�climate�control,�oil��supply�as�well�as�automotive,�hydraulic�and�air��pressure�systems.• Eliminates costs in the purchase and storage of manufactured fittings:� Quick�return�on�investment

Multiple, various bends possible One support plate for all tube sizes

Tube Bender Set 24134� 1/4", 5/16", 3/8”,1/2"� � � B

Spare former 1/4” 24032� 1/4"� � � BSpare former 5/16” 24033� 5/16"� � � BSpare former 3/8” 24036� 3/8"� � � BSpare former 1/2” 24038� 1/2"� � � B

Basic Tool Only 24130� Each� � � B��

Fast-locking supports Injected aluminium body

• Fast locking supports: Easy�to�adapt�to�each�pipe�size

• Robust design:��Strong,�injected�aluminium�body

• Efficient use:��One-hand�operation

• New, ergonomic design:��Ratchet�handle�now�located�in�more��natural�position�for�one-handed�use

• Convenient:��One�single�support�plate��for�all�tube�sizes


10 TEL:� TOLL�FREE�1800�186�657FAX:�TOLL�FREE�1800�286�657

10

Bending Tools

Universal application possibilities in sanitary and heatinginstallations, refrigeration, climate control, floor heating as well as hydraulic systems.

Key�features• Eliminates costs in the purchase and storage of fittings• 50% less soldering saves material and energy• Increases safety by reducing number of joints• Reduced labour time• Mechanical ratchet feed

• Plastic bending formers and supports with low friction:��Optimum�bending�results

• Open bending frame:��Production�of�repeated��alternate�angled�bends��possible

• Universal supports:��For�bending�of�copper�or��non-coated�tubes

• Pliers with bayonet catch:��Bending�formers�easily��changeable • Smooth-running feed lever:

��Ideal�in�restricted�spaces�and��for�one�handed�operation

• Side lever:��Quick�release�and�reset�of��bending�former

• Basic body made of hard die-cast: ��Tough�and�long-lasting


For copper, aluminium & steel pipe� 23022 3/8”, 1/2”, 5/8”, 3/4”, 7/8” O.D. � BFor multilayer & MSR plastic pipe (see pg.40)� 23095 14, 16, 18, 20, 26, 32mm � B

MINIBENDER

Compact precision bender for micro bore bending to 180°

Minibender for 1/4", 5/16", 3/8" O.D. 25151 1/4", 5/16", 3/8" � � A

UNIVERSAL�TUBE�BENDERS

Individual precision benders for micro bore 25140� 1/4" O.D. � � Abending to 180° 25131� 5/16" O.D. � � A 25141� 3/8" O.D. � � A 25142� 1/2" O.D. � � A 25136� 5/8" O.D. � � A

�COPPER�TUBE�EXTERNAL�BENDING�SPRINGS

For hand bending of soft copper tubes

Key features• With coiled cone:��Ideal�handling�even�with�longer�tubes• Cadmium-plated spring steel: Tough�and�long-lasting• Optimal spring form: No�buckling�in�bending�radius�area

Bending Spring 1/4” 25187� 1/4” O.D. � � A




Tube�Bender�MaxiFor�exact�bending�up�to�90°�of�tubes�made�of:

Soft copper and aluminium dia. 12 - 22mm, 3/8” - 7/8”Soft non-coated copper dia. 10 - 18mm, 3/8” - 5/8”Soft precision steel dia. 12 - 22mm, 3/8” - 7/8”Thin-walled, soft stainless steel�� dia. 12 - 18mm, 3/8” - 5/8”


11


Key Features•�Easier and more accurate to use.•�Offset handles and grips for ultimate comfort. • Angle markings for reference to 180°. • Will bend hard-drawn copper.

Pro-Bend�Tube�Benders

Bending Tools

For�exact�bending�of�hard�and�soft�drawn�copper�tubes

Pictures shown with optional Tripod Stand

PRO-BEND�TUBE�BENDERS1/2” Pro-Bender� 25913 1/2” (AUS) � � � A3/4” Pro-Bender 25914 3/4” (AUS) � A

ROBULL�HYDRAULIC�/�ELECTRIC�BENDERS�FOR�STEEL�PIPE

Heavy-duty, compact hydraulic bender with 15-tonpressure ram and automatic piston return.All bender sets are fully equipped and completewith carrying case.

Robull Hydraulic Set (manual operation) 57961 Set � � � B3/8”, 1/2”, 3/4”, 1”, 11/4”, 11/2”, 2”Short radius formers

Robull Electro-hydraulic Set (electric, 240V) 57972L� Set � � � B�3/8”, 1/2”, 3/4”, 1”, 11/4”, 11/2”, 2”Wide radius formers

Replacement Formers (standard / short radius) 57985� 3/8” � � � B 57986� 1/2” � � � B 57987� 3/4” � � � B 57988� 1” � � � B 57989� 11/4” � � � B 57990� 11/2” � � � B 57991� 2” � � � B

Replacement Formers (wide / long radius) 58010� 3/8” � � � B 58011� 1/2” � � � B 58012� 3/4” � � � B 58013� 1” � � � B 58014� 11/4” � � � B 58015� 11/2” � � � B 58016� 2” � � � B

Hydraulic Oil 58185� 1 Litre � � � B�

Collapsible Tripod Stand (optional) 25748� Each � � � B



12

Bending Tools

ROBEND�3000�ELECTRIC�TUBE�BENDERFor site use or prefabrication of preset angle bends in copper, steel, stainless steel and plastic coated steel pipes. Complete with carrying case.Set for bending the following O.D. sizes:

Copper: 1/2”, 3/4”, 1” and 25711X� Set� � �� BSteel / Stainless Steel: 1/4”, 1/2”, 3/4”

Copper: 1/2”, 5/8”, 3/4”, 7/8”, 11/8” and 7642053� Set� � �� BSteel / Stainless Steel: 1/4”, 1/2”, 5/8”, 3/4”

Robend 3000 (machine only) 25740X� 240v� � �� B

Replacement Former & Guide Sets 25652 1/2" O.D. � �� B 25616 5/8" O.D. � �� B 25619 3/4" O.D. � �� B 25622 7/8" O.D. � �� B 25625 1" O.D. � �� B 25626 11/8" O.D. � �� B

Replacement Guide Block Pin 25743� � �� B�

Collapsible Tripod Stand (optional) 25748 � � �� B

Key�features• Eliminates costs in the purchase and storage of fittings��Simplified�work�preparation• Less joints:��Increased�safety�in�installation�work• Elimination of joints, saving material and energy:��Quick�return�on�investment• Production of repeated alternate angled bends possible:��Universal�application• Bending former made of high quality forged aluminium:��Retains�shape�and�is�stable• Patented ROLUB ANTI-BLOCK SYSTEM:��Bending�without�deformation�and�wrinkles�due�to��less�friction• Optional Collapsible Tripod Stand also available (Part no: 25748)

ROBEND�3000Tough,�portable�Power�Bender�for�12-30mm�pipe.Universal applications in sanitary and heating installations, refrigeration and climate controlas well as industrial systems.

Cold bending up to 180° of tubes made of:• Soft, semi-hard and hard copper (DIN EN 1057) dia. 12 - 28 mm• Coated copper and precision steel dia. 12 - 28 mm• Soft, half-hard and hard precision steel (DIN 2391, 2393, 2394) dia. 12 - 28 mm• Threaded steel (DIN 2440, 2441) dia. 3/8” - 3/4”• Seamless stainless steel GW 541, wall thickness 1.0mm - 1.2mm dia. 12 - 28 mm• Coated steel tubes, MPS-H Heating type (DIN EN 2394) dia. 14 - 30 mm

•Powerful 1010w (240v) motor:Well-proven�for�use�on��construction�sites

•Forged aluminium former with bending radius scale:High�quality�&�robust

•Special ROLUB guide shoe: Bending�without�deformation�&��wrinkles�due�to�less�friction

•Automatic switch-off when preset bending angle is obtained:Fast�batch�production�possible

•Tool-free presetting of bending angle: Exact�bending


13



13

Pipe Threading Equipment

SUPER�CUT�HAND�RATCHET�THREADERS

Advanced design ratchet stocks and high-specificationdie heads and dies allow for easy threading in tightspaces. All sets fully equipped with a Ratchet handleand a robust carrying case.

Super Cut 1/2"–1" BSPT Set 70780X� 1/2",3/4",1" � � A

Super Cut 1/2"–11/4" BSPT Set 70791X� 1/2",3/4",1",11/4" � � A

Super Cut 1/2"–2" BSPT Set 70892X� 1/2",3/4",1", � � A 11/4",11/2",2"

SUPER�CUT�DIE�HEADS�INCLUDING�DIES.

Interchangeable with most leading brands of 70821X� 1/4" BSPT � � Ahand ratchet threaders and hand-held power 70822X� 3/8" BSPT � � Athreaders, including our Supertronic 1000, 70823X� 1/2" BSPT � � A1250 & 2000 models. 70824X� 3/4" BSPT � � A 70825X� 1" BSPT � � A 70826X� 11/4" BSPT � � A 70842X� 11/2" BSPT � � A� 70843X� 2" BSPT � � A

Ratchet Handles 70840X� 1/4"-11/4" � � A

�� 71272� 11/2"-2" � � A

Die Head Adaptors: For 71272 handle to take dies 1/4”-11/4” 71273� � � AFor 71250 Supertronic 2000 to take dies 1/4”-11/4” 71271� � � C

SUPERTRONIC�1000�MINI�PORTABLE�POWER�THREADER

Helicoidal power transmission and electronic reversereduce weight, increase portability, and make the1000 incredibly strong and long lasting. Smallest headon the market. Set fully equipped within a robust carrying case.�

Supertronic 1000 (240 Volts) � � � � �1/2” - 1” BSPT Set 71350� 1/2” , 3/4”, 1”� � � C

(Uses the same Die Heads as listed above in ‘SuperCut Die Heads including Dies’ - maximum 1”).

SUPERTRONIC�1250�PORTABLE�POWER�THREADER

Quick and effortless production of safe precision threadedjoints. Helicoidal power transmission and electronic reverseto reduce weight and increase portability. Set fully equippedwithin a robust carrying case.

Supertronic 1250 (240 Volts)� � � � � �1/2" - 11/4" BSPT Set� 71450� 1/2",3/4",1",11/4" � � C

(Uses the same Die Heads as listed above in ‘SuperCut Die Heads including Dies’ - maximum 11/4").

SUPERTRONIC�2000�PORTABLE�POWER�THREADER

High performance power threading with versatile applicationswithout a vice. 15–25 rpm threading with 60 rpm geared reverse. Set fully equipped within a robust carrying case.

Supertronic 2000 (240 Volts)�1/2"–2" BSPT Set� 71256� 1/2”–2” � � C

(Uses the same Die Heads as listed above in ‘SuperCut Die Heads including Dies’ - maximum 2”).

Supertronic 2000 (machine only) 71250� 240V � � C


14


Pipe Threading Equipment

THREADING�OILNon-toxic, P.C.B. free threading oil formulated for high cooling properties, free flow and extended die life.

Threading Oil (mineral) 65010� 5 litres � � B

� � � � � �THREADING�MACHINE�DIE�HEADS�AND�DIESReplacement and additional die heads PRICES ON APPLICATION TO and dies are available for all major ROTHENBERGER AUSTRALIA thread types including BSPT, NPT, SALES DEPARTMENTmetric and many bolt threads.

For details of specific die heads and dies PRICES ON APPLICATION TOto fit all ROTHENBERGER and Asada ROTHENBERGER AUSTRALIA threading machines please contact SALES DEPARTMENTour customer services department.

THREADING�MACHINE�SPARES�AND�ACCESSORIES

Comprehensive parts lists and details of PRICES ON APPLICATION TOuseful accessories are available upon application. ROTHENBERGER AUSTRALIA SALES DEPARTMENT

ROTHENBERGER�PIPE�THREADING�MACHINES

A new generation of compact powerful pipe cutting reaming and threading machines with automatic oil feed, automatic easy-change die heads and dies and low maintenance requirements. All machines supplied fully equipped including threading oil and foot switch

Supertronic 2SE 56130� 240 Volts � � DSingle Speed 1/2"–2" BSPTAutomatic Oil Feed Complete with one automatic die head and two sets of dies pipe cutter and reamer Set of 4 Legs

Supertronic 3SE 56240 240 Volts � � DSingle Speed 1/2"–3" BSPTAutomatic Oil Feed Complete with two automatic die heads and three sets of dies pipe cutter and reamer Set of 4 Legs

Supertronic 4SE 56345� 240 Volts � � DDual Speed (22/50 rpm) 1/2"–4" BSPTAutomatic Oil Feed Complete with two automatic die heads and three sets of dies pipe cutter and reamer Set of 4 Legs


15


Arealportabilitysolutionforthemobiletradesman:

We recommend the following selection as the ideal mobile grooving and threading setup, for tradesmen doing multiple small or low-volume jobs at different sites, requiring the equipment to be easily relocated and used with just one operator.

Compact for quick and easy setup, and able to be packed up into only a few small components that will easily fit into the back of most work vehicles, without taking up much space.

Threading and roll Grooving Equipment

ROLL�GROOVER�&��BASE�PLATES�Compact, durable and efficient lightweight roll-groover unit. For use with all threading machines.Roll grooving capacity 2"–6" (can be adapted togo down to 1” with optional roller and shafts).

Note: Roll Groover must be used in conjunctionwith a Base Plate. Base Plate does not come withRoll Groover and must be ordered separately.

Roll Groover 8870922 (Supersedes 8872000) � � D

Grooving Roller and Shaft 1” 8870905� (Supersedes 56521)� � � DGrooving Roller and Shaft 11/4”- 11/2” 8870906� (Supersedes 56522)� � �� D

Base plate for Supertronic 2SE 88709B50� � � DBase plate for Supertronic 3SE 88709B80� � � DBase plate for Supertronic 4SE 88709B100 � � DBase plate for Supermatic 300 88709O300 � � DBase plate for Ridgid 300 88709R1300 � � D

Base plate & accessories for Supertronic 2000 8870921� � D (Must be used with Portable Work Stand, see p16)

Spare Ratchet Handle for Roll Groover R2.7180� � � � D

Mobile�Roll�Grooving�and�Threading�Set

Roll Groover 8870922 2”-6” � � DSupertronic 2000 Set 71256 1/4”-2” � � CBase Plate and Accessories 8870921 � � DPortable Work Stand 70751 � � BCastors for Tripod Stand (optional) 000999 Each � � BPipe Support Stand (optional, but recommended) 10640 � � D

Note: If you only wish to roll groove, and notthread, replace Supertronic 2000 Set with: Supertronic 2000 (machine only) 71250 240V � � CDie Head Adaptor 71271 1/4”-11/4” � � C



16


Vices and Stands

VICES

Hinged Yoke Vice with easy opening and 70710� 1/8"–2" � � Bclosing action and positive grip. � 70711� 1/8"–4" � � B

Quick Release Chain Vice with lever action to 70713� 1/8"–21/2" � � Atighten or release the chain. � 70714� 1/8"–4" � � A 70715� 1/4"–6" � � A

PORTABLE�WORK�STANDS

The professional pipe-fitters work stand. With wide angle folding legs for exceptionalstability, complete with ceiling brace, bendingholes for 3/8", 1/2" and 3/4" steel pipes and adurable aluminium top plate. Will accept 2" Hinged Yoke Vice and all Chain Vices.

Tripod Stand 70751� Each� � � B

Castors for Tripod Stand (optional) 000999� Each� � � B

TRI-STAND

The traditional style of work stand with a fold-down platform for stability and an adjustablerear leg to enable handling of full lengths of steelpipe. Complete with 2" hinged yoke vice.

Tri-Stand 4631000� Each � � B

PIPE�SUPPORT�STAND

Heavy duty tubular steel construction, rigid frame,adjustable height 686mm - 1270mm.For pipes up to 6”.

Pipe Support Stand 10640� Each� � � D

PROFESSIONAL�PIPE�STAND

Heavy duty collapsable pipe stand withball guide track on head. For pipes up to 6”.Adjustable height 780mm - 1200mm.

Professional Pipe Stand 56047� Each� � � D



17

Pipe Cutting SawPIPECUT�Pipe�Cutting�Saw

PIPECUT�PIPE�CUTTING�SAWAll of our new pipe cutting systemscome complete in a convenient carry bagwith pipe rollers and tungsten carbide tip blade.

Pipecut 170 � 1870016� 15-170mm� � � D�Pipecut 170E � 1870017� 15-170mm� � � DPipecut 200 � 1870020� 20-220mm� � � D�Pipecut 360 � 1870036� 75-360mm� � � D

SPARE�BLADES(Blades work with all machines unlessotherwise noted)Tungsten Carbide Tip Blade (General use) 187000116� 140mm� � � DCeramic Blade (Stainless Steel)� 187000216� 140mm� � � DDiamond Blade (Cast Iron)� 187000316� 140mm� � � DTungsten (Plastic, 360 Machine only)� 187000916� 165mm� � � D

Portable�pipe�cutting�system

Ideal one-man pipe cutting system, ideal for all materials commonly used in the manufacturing of piping: stainless steel, iron, copper and all types of plastic.

Most size pipes can be cut with one operator - not required to lift the pipe onto a bench to cutComes in a convenient carry bag

3 Kinds of cutting blades available:Diamond, Ceramic, Tungsten

•Much safer than an angle grinder: ��Minimal�sparks�created

•Cutsstraight every time: ��Due�to�self-guiding�system�

•CleanCuts:No�burrs�left�on�pipe

•Constantcuttingspeed: ��Increases�life�of�cutting�blades�

•Lightweight: ��Weighs�as�little�as�5.7kg

Key�Features Pipecut�170 Pipecut�170E Pipecut�200 Pipecut�360

Cutting Capacity 15mm - 170mm 15mm - 170mm 20mm - 220mm 75mm - 360mm

Max. wall thickness (steel) 6mm 8mm 8mm 8mm

Max. wall thickness (plastic) 14mm 16mm 12mm 28mm

Voltage 230V 230V 230V-240V 230V-240V

Power (unloaded) 1000W 1200W 1100W 1400W

RPM 3500rpm 3500rpm 4000rpm 4000rpm

Weight 5.7kg 5.7kg 9.4kg 14.9kg

Electronic Speed Control No Yes No No


18



Stainless�Steel�Pipe�CuttersSpring�loaded,�telescopic�tube�cutter�for�precise,�effortless�cutting�of�stainless�steel�pipe.

Key Features•�Constant, tight working radius•�Telescopic cutter arm (INOX Pipe Cutter No.1), for easy adjustment to all pipe sizes•�Fine adjustment knob, for precise cutting•�Up to four guide rollers, to support all applicable pipe sizes• Spare cutter wheel in handle• ‘Quick release’ button on ratchet cutter

•�Double needle bearing wheel support, for better cutter wheel rotation

•�Stronger cutting wheel for INOX pipe

•�4 guide rollers, for all pipe sizes

•�Quick release button

•�Ratchet action for fast sizing to all pipe diameters

Steel�Pipe�CuttersPrecision,�drop-forged�steel�construction,�for�easy�burr-free�cutting.

Key Features•�For steel pipe cutting•�Heavy duty steel body•�Large handle for easy size adjustment•�Dual guide rollers for all pipe sizes• 3 sizes, for 1/8” to 4” steel pipe

Stainless & Steel Pipe Cutters

•�Fine adjustment knob, for precise adjustment of cutting size

INOX Tube Cutter 35� 70055� 6mm - 35mm � � AINOX Tube Cutter 42� 70070� 6mm - 42mm � � AINOX Pipe Cutter No.1� 70340� 6mm - 60mm � � A

Spare Cutter Wheel - INOX Tube Cutter 35 & 42 70056� Each � � ASpare Cutter Wheel - INOX Pipe Cutter No.1 70341� Each � � A

Super 11/4” 70040� 1/8”–11/4” � � ASuper 2”� 70045 1/8”–2” � � AEnorm 4” 70060� 2”- 4” � � B

Spare Cutter Wheel - Super 11/4” 70046� Each � � ASpare Cutter Wheel - Super 2” 70051� Each � � ASpare Cutter Wheel - Enorm 4” 70061� Each � � A


19


Pliers

ROGRIP�PLIER

Self-adjusting plier with spring action for 70558� 10” � � A rapid gripping of all pipes and nuts.Automatically sizes to the object and removesthe need for manual setting.

MULTIGRIP�PLIERS

Drop-forged from chrome vanadium steel. 70527� 7" � � ARed finish. 70528� 10" � � A 70529� 12" � � A

SPK�MULTIGRIP�PLIERS

With self-locking anti-slip action on pipe 70521� 7” � � Aand nuts. Black finish with comfort grip. 70522� 10” � � A� 70523� 12” � � A

ROFAST-LOCKLOCKING�PLIERS�

New push-button locking multigrip that locks 70532� 10”� � � Ain place at the push of a button. 70533� 12”� � � A12 size adjustments & slim jaw for access intight spaces.

MACHINED�GROOVE�PLIERS

With interlocking anti-slip action and 70591� 91/2” � � Ainduction hardened teeth. 70592� 12” � � A 70593� 16” � � A

SANIGRIP�WASTE�PLIER

With 4 position jaw adjustment up to 21/2" 70416� 10” � � Acapacity. Ideal for waste traps and waste back nuts. Includes soft grip removable plastic jaws

Pair of replacement plastic jaws 70417� Pair � � A

SHEET�METAL�BENDING�PLIERS

Forged burnished steel, box joint, with PVC coated grips.

Straight 351055� 280mm � � B45° 351056� 280mm � � B90° 351057� 280mm � � B

CONCRETER’S�NIPPERS

Standard action Nippers with long 70118� 9" � � Ahandles for easy use 70119� 10" � � A


20


wrenches

HEAVY�DUTY�PIPE�WRENCH

High strength “one piece” construction with� 70150� 8" � � Alarge capacity jaws and induction hardened�� 70151� 10" � � Ateeth.� 70152� 12" � � AReplacement hook and heel jaws available.� 70153� 14" � � A� 70154� 18" � � A� 70155� 24" � � A� 70156� 36" � � A� 70157� 48" � � A

ALUMINIUM�PIPE�WRENCH

Features similar to Heavy Duty Pipe Wrench� 70159� 10" � � Abut 40% lighter due to aluminium alloy� 70160� 14" � � Ahandle construction. 70161� 18" � � AReplacement hook and heel jaws available.� 70162� 24" � � A� 70163� 36" � � A� 1044800� 48" � � A� Note: 48” aluminium wrench is SUPER EGO brand

STILLSON�PIPE�WRENCH

Classic design in forged and tempered steel. 70350� 8" � � AUnbreakable housing and shaft and induction 70351� 10" � � Ahardened teeth. 70352� 12" � � A 70353� 14" � � A 70354� 18" � � A 70355� 24" � � A 70356� 36" � � A

OFFSET�ALUMINIUM�PIPE�WRENCHExceptionally strong yet ultra light. 70115� 14" � � AIdeal for use in confined spaces. 70116� 18" � � A�

R-TYPE�WRENCHVersatile one-handed speed wrench. 70222� 10" � � A 70223 12” � � A

ADjUSTABLE�CORNER�WRENCH�

With easy thumb turn adjustment. 262152 9" � � B 262153 10" � � B 262154 12" � � B 262155 14" � � B

ADjUSTABLE�WRENCH

In Chrome Vanadium Steel with chrome-� 70440� 4" � � Aplated finish. Positive location and precision 70441� 6" � � Amanufactured for ease of use and long 70442� 8" � � Aworking life. 70443� 10" � � A 70444� 12" � � A 70445� 15" � � A

STANDARD�BASIN�WRENCH

Swivelling jaw for 3/8” to 11/4” tap nuts. 70228� 3/8"–11/4" � � A

TELESCOPIC�BASIN�WRENCH

Spring Loaded Wrench with 70225� 3/8"–11/4" � � Afeatures of standard type plus 4 length 70227� 11/4"–21/2" � � Aadjustments.


21


wrenches and Spanners

Complete�torque�wrench�set�with�adjustabletightening�torque�valid�for�all�refrigerantsincluding�R410A.

Sizes: 17, 22, 24, 26, 27, 29mm

Torque�Wrench�Kit

•�Ideal for the prevention of potential leaks through condenser and evaporator connections• Adjustable tightening torque avoids flare failure due to excessive tightening

Set�values Mark�on�vertical�scale Mark�on�turning�handle

10Nm 10 10

18Nm 18 18

42Nm 42 42

55Nm 55 0

65Nm 65 0

75Nm 75 0

Dimension Wrench Tightening�torque�(Nm)

Tightening�torque�with�gas�R407C�-�R134A

1/4” 17mm 18Nm

3/8” 22mm 42Nm

1/2” 24mm 55Nm

5/8” 27mm 65Nm

Tightening�torque�with�gas�R410A

1/4” 17mm 18Nm

3/8” 22mm 42Nm

1/2” 26mm 55Nm

5/8” 29mm 65Nm

ROCLICK�Combination�Open-Ended�/�Hinged�Ring�SpannerChrome-vanadium�steel,�polished�and�high�shine�chrome-plated.

Set consists of ROCLICK 8, 10, 11, 13, 14, 19mm spanners, in plastic carry case.

Key�Features•�Movable ring ratchet: For�use�even�in�tight�spaces•�Working angle only 5O

Small�working�radius•�Fine-running ratchet (72 teeth): Precise�Work

Torque Wrench Kit�� R175001� 17-29mm � � A


ROCLICK Spanner Set�� 70490� 8-19mm � � A


22


wrenches and Spanners

ROTURN�SPANNERS

ROTURN Spannner Set 70475� 10-22mm � � A

STRAP�WRENCHHigh strength aluminium alloy construction, 70241� 1”- 8” � � Awith replacement nylon strap for positive grip without marking surfaces

Replacement Strap 70269� Each� � � A

EASY�GRIP�STRAP�WRENCH

Fast and easy clamping, allowing quick 55075� 3/4” - 6”� � � Aadaptation to the required pipe diameter.Special nylon-reinforced rubber strap allowinggood grip and extra strength. Will not damageor deform pipe, even plastic pipe�

Replacement Strap� 55076� Each� � � A

REVERSIBLE�CHAIN�WRENCHHigh strength positive grip for tightening 70235� 4” � � Aand loosening, without removal of chain

HEAVY�DUTY�TONGUE�CHAIN�WRENCH

Designed for the most demanding jobs. 70242� 11/2" � � ADouble-sided head and quick-release action. 70243� 21/2" � � A 70244� 4" � � A 70245� 6" � � A�

ROTURN�Combined�Ring�/�Open-Ended�SpannerChrome�vanadium�steel,�polished�and�high�shine�chrome-plated.

Set consists of ROTURN 10, 11, 13, 14, 16, 17, 19, 22mm, in plastic carry case.

Key�Features•�Ergonomically optimised: Pressure on the flat side of spanner makes work easier:��Approx.�42%�effort�saved,��protects�hand�as�well•�Innovative technology: ��Will�loosen�hexagonal�screws��with�up�to�70%�damage


23


We�also�have�a�large�range�of�plastic�cutters�and�shears�available�-�see�page�37

Copper Tube Cutters

Key Features•�Constant, tight working radius of 123 mm: Optimal�for�confined�spaces•�Exact telescopic guide: Precise�cut•�Extremely easy turning of the adjustment knob: Quick�adjusting�of�the�working�area•�Two guide rollers with recess: For�cuts�near�to�flares•�Retractable tube internal deburrer: Always�within�reach• Spare cutter wheel in handle: Immediately�available�when�needed

PIPESLICES

Single action, automatic tube cuttingin tight locations

Pipeslice 1/2” 88807 1/2" O.D. AUS � � APipeslice 5/8” 88810 5/8" O.D. AUS � � APipeslice 3/4” 88808 3/4" O.D. AUS � � APipeslice 7/8” 88802 7/8" O.D. AUS � � APipeslice 1”� 88820� 1” O.D. AUS� � � APipeslice 1/2” (for New Zealand) 88801 1/2" NZ � � APipeslice�3/4” (for New Zealand) 88804 3/4" NZ � � APipeslice 1” (for New Zealand)� 88813 1” NZ� � � A

MINI�TUBE�CUTTERS

Fully adjustable precision tube cutting in limited space

Minicut No.1 Pro 70401� 1/8"–5/8" O.D. � � A� ��(Supersedes PN 70001)

Minicut No.2 Pro 70402� 1/8"–7/8" O.D. � � A (Supersedes PN 70002)

Heavy duty compact tube cutters with large adjusting wheel

Minicut 2000 Tube Cutter 70105� 1/8"–7/8" O.D. � � AMinimax Tube Cutter 70015� 1/8"–11/8" O.D. � � A

NO�30�PRO�TUBE�CUTTER

Traditional design with spare wheel and fold-out reamer

No.30 Pro Tube Cutter 71019� 1/8"–11/8" O.D. � � A� ��(Supersedes PN 70019)�

NO�50�TUBE�CUTTER

Traditional design with spare wheel andfold-out reamer for larger tube sizes

No.50 Tube Cutter 70065� 1/2"–2" O.D. � � A

No. 35 Tube Cutter� 70027� 1/4”–13/8” O.D� � � A

No. 42 Pro Tube Cutter 70029E� 1/4”–15/8” O.D� � �� A

No. 35 MSR (for Multilayer, PE, PP, PVDF & PVC) � 70108� 6-32mm O.D� � � A

Tube�Cutter�35�/�42�ProStable�telescopic�tube�cutter�for�exact�cutting�of�tubes.

For copper, brass, aluminium and thin-walled steel tubes


24


Copper Tube Cutters / Spares

AUTOMATIC�TUBE�CUTTERS

Spring-loaded action for instant change in tubesizes. Will also cut plastic tube with alternativewheel - see below.Automatic Tube Cutter No.1 70030� 1/8"–25/8" O.D. � � AAutomatic Tube Cutter No.2 70142� 2"–5" O.D. � � A

ROTRAC�TUBE�CUTTERS

Extremely smooth action. Precision cutting in restricted space

Rotrac 28 70010� 1/8"–11/8" O.D. � � ARotrac 42 70011� 1/4"–15/8" O.D. � � A

Rotrac 28 Plus 70020� 1/8”–11/8” O.D. � � ARotrac 42 Plus 70021� 1/4”–15/8” O.D. � � ARotrac Plus cutters come with additional 2 x copperwheels, 1 x stainless wheel and 1 x pin & axle.

COPPER�CUTTER�WHEELS

For AUS Pipeslice 88806 Each (min. qty 10) � � AFor New Zealand Pipeslice 88803� Each (min. qty 10)� � � A

For Minicut No.1 Pro & No.2 Pro, Minicut 2000, 70017 Each (min. qty 5) � � AMinimax, No.35, No.30 Pro, No.42 Pro, No.50& Automatic No.1

For Automatic No.2 and No.3 70057 Each (min. qty 1) � � A

For Rotrac 28 & 42 70007 Each (min. qty 5) � � A

PLASTIC�CUTTER�WHEELS

For Automatic No.1 70028� Each (min. qty 1) � � AFor Automatic No.2 55054� Each (min. qty 1) � � AFor Automatic No.3 55074� Each (min. qty 1)� � � A

For TC 35 MSR 70188� Each (min. qty 5)� � � A

STEEL�CUTTER�WHEELS

For Super 11/4” Steel Pipe Cutter 70046� Each (min. qty 1)� � � AFor Super 2” Steel Pipe Cutter 70051� Each (min. qty 1)� � � AFor Enorm 4” Steel Pipe Cutter 70061� Each (min. qty 1)� � � A

STAINLESS�STEEL�/�INOX�CUTTER�WHEELS

For INOX Tube Cutter 35 & 42, No.30 Pro, 70056� Each (min. qty 5) � � ANo.35, No.42 Pro & No.50

For INOX Pipe Cutter No.1, Automatic No.1 70341� Pack of 2 (min. qty 1 pack)� � � A

For Rotrac 28 & 42 90007� Each (min. qty 2) � � A

AXLES�&�PINS�(TO�HOLD�CUTTER�WHEELS)

Pin (without Circlip) for Rotrac 28 & 42 70080 Each � � ACirclip (without Pin) for Rotrac 28 & 42 70081 Each � � A

Axle for No.50 (copper wheel only) 70006 Each � � A

Axle for Automatic No.2 & 3 (copper & plastic) 7510007 Each � � EPin for Automatic No.2 & 3 (copper & plastic) 7510008 Each � � E

Axle for Super 11/4� 70049� Each� � � AAxle for Super 2”�� 70053� Each� � � AAxle for Enorm 4” 70064� Each � A�

Axle for INOX Pipe Cutter No.1 7530007� Each � A

Axle for all other cutters: 70041 Each � � AMinicut No.1 Pro, No.2 Pro, Minicut 2000,Minimax, No.30 Pro, No.35, No.42 Pro, TC 35 MSR,No.50 (stainless only), Automatic No.1

DEBURRER�BLADES

For No.35, No.42 Pro, TC 35 MSR, Automatic 21652 Each (min. qty 10) � � A�No.1, No.2 & No.3

For�more�help�&�information�on�cutters�wheels�and�axles,�please�refer�to�the�table�on�the�next�page.

Tube�Cutter�Wheels�and�Spares


25

Copper Tube Cutter SparesTube�Cutter,�Wheels�and�Spares

FOR�TUBECUTTER

TUBE�CUTTER�PART�NO.

CUTTER�WHEEL�PART�NO.

DIMENSIONSd,L,D�(mm)

CUTTING�DEPTH

SPARE�AXLE�NO. DEBURRER�BLADE

COPPER�TUBE�CUTTERS1/2” Pipeslice Aus5/8” Pipeslice Aus3/4” Pipeslice Aus7/8” Pipeslice Aus1” Pipeslice Aus

8880788810888088880288820

8880688806888068880688806�

3.0 / 4.2 / 17.03.0 / 4.2 / 17.03.0 / 4.2 / 17.03.0 / 4.2 / 17.03.0 / 4.2 / 17.0

3.03.03.03.03.0

N/AN/AN/AN/AN/A��

N/AN/AN/AN/AN/A��

1/2” Pipeslice NZ3/4” Pipeslice NZ1” Pipeslice NZ

888018880488813��

888038880388803��

3.0 / 4.1 / 16.0

3.0 / 4.1 / 16.0

3.0 / 4.1 / 16.0

3.0

3.0

3.0

N/AN/AN/A

N/AN/AN/A

Minicut No.1 ProMinicut No.2 Pro

70401�70402

7001770017�

4.8 / 2.0 / 18.5

4.8 / 2.0 / 18.5

3.0

3.0

7004170041

N/A

Minicut 2000 70105 70017 4.8 / 5.9 / 18.5 3.0 70041 N/A

Minimax 70015 70017 4.8 / 5.9 / 18.5 3.0 70041 N/A

No.30 ProStainless steel wheel

71019 7001770056

4.8 / 5.9 / 18.54.8 / 5.9 / 18.5

3.04.0

7004170041

N/A

No.35Stainless steel wheelNo.42 ProStainless steel wheel

70027

70029E

70017700567001770056

4.8 / 5.9 / 18.54.8 / 5.9 / 18.54.8 / 5.9 / 18.54.8 / 5.9 / 18.5

3.04.03.04.0

70041700417004170041

21652

21652�

No.50Stainless steel wheel

70065 7001770056

4.8 / 5.9 / 18.54.8 / 5.9 / 18.5

3.04.0

7000670041

N/A

Automatic No.1Stainless steel wheelAutomatic No.2Automatic No.3

70030

70142N/A

70017700567005770057

4.8 / 5.9 / 18.54.8 / 5.9 / 18.58.0 / 11.0 / 29.08.0 / 11.0 / 29.0

3.04.07.07.0

700417004170006

7510007�+�7510008*

21652

2165221652

Rotrac 28Stainless steel wheelRotrac 42Stainless steel wheel

70010

70011

70007900077000790007

4.8 / 3.0 / 16.04.8 / 3.0 / 16.04.8 / 3.0 / 16.04.8 / 3.0 / 16.0

2.52.52.52.5

70080�(Pin)70081�(Circlip)

70080�(Pin)70081�(Circlip)

N/A

N/A

PLASTIC�PIPE�CUTTERS

TC 35 MSR 70108 70188 4.8 / 5.9 / 19.3 3.0 70041 21652

Automatic PL1 (plastic cutter)Automatic PL2 (plastic cutter)Automatic PL3 (plastic cutter)

7003170032

N/A

700285505455074

4.8 / 6.0 / 23.68.0 / 11.0 / 40.08.0 / 11.0 / 45.0

13.0 7.016.0

7510007�+�7510008*7510007�+�7510008*7510007�+�7510008*

216522165221652

STEEL�TUBE�CUTTERS

Super 11/4"Super 2”Enorm 4”

700407004570060

700467005170061

7.5 / 13.5 / 26.09.0 / 19.0 / 31.59.7 / 27.0 / 41.5

5.57.07.0

700497005370064

N/AN/AN/A

INOX�/�STAINLESS�STEEL�CUTTERS

INOX Tube Cutter 35INOX Tube Cutter 42INOX Pipe Cutter No.1

700557007070340

700567005670341

4.8 / 5.9 / 18.54.8 / 5.9 / 18.5

16.0 / 10.0 / 30.0

4.04.016.0

7004170041

7530007

2165221652

N/A

*Both items are needed: 7510007 (axle) & 7510008 (screw)


26


General Tools

UNIGRAT�QUICK�ACTION�DEBURRER

For deburring edges of tubular and sheet materials. Small and handy, ideal for carrying about. Blade can be swivelled to match material contours.

Unigrat with HSS all-purpose blade 21660� � � A

GRATFIX�HSS�DEBURRER

For quick deburring of edges, tubular and sheet materials. Replaceable blade. Plastic handle.

GRATFIX with No.1 blade 21655� � � ASpare No.1 HSS general purpose blade 21652� Each (min. qty 10) � � A

INTERNAL�/�EXTERNAL�DEBURRER

For the rapid removal of both internal 11006� 1/8"–13/8" O.D. � � Aand external burrs.

UNI-DEBURRER

Quick and easy removal of all internal 70075� 1/8"–13/4" O.D. � � Band external burrs on stainless steel pipes.

SCREWDRIVER�SET

7pc VDE Insulated Screwdriver Set 323126 Set � � B(1000V rated) comprising: 2.5mm x 75mm Slotted 4.0mm x 100mm Slotted 5.5mm x 125mm Slotted 6.5mm x 150mm Slotted No.1 Phillips x 80mm (PH1) No.2 Phillips x 80mm (PH2) 3.0mm x 140mm Mains Tester

MIXER�TAP�SET

Universal set for fixing mixer taps to sinks. 80000� 9-13mm � � A9, 11, 12, 13mm

DIGITAL�THERMOMETERS

Ro-Therm R088400� � � � AReading scale: Celsius / FahrenheitProbe: 108mm, stainless steelTemperature range: -50oC to 300o CAccuracy: +/- 1oCTimer: Automatic disconnection after 15min.

Ro-Therm Pro R088401� � � � AReading scale: Celsius / FahrenheitProbe: 96mm, stainless steelTemperature range: -50oC to 300o C Accuracy: +/- 1oC Adapts to table / wall, programmable min. / max.


27


General Tools

TAPE�MEASURE

Ro-Lock Professional Tape 88819� 5 metre (16') � � AMetric / Imperial Magnetic blade hook, tape lock / quick release

TRI-LEVELS

3-sided ‘A’ shaped Spirit Levels for use in all applications. Unique design allows for easy use onpipe, ridge tiles, coping and other non-flat areas.Heavy-duty metal and rubber construction, withmm and inch markings

Tri-Level 16” 89056� 16” � � BTri-Level 24” 89057� 24” � � BTri-Level 36” 89058� 36” � � BTri-Level 48” 89059� 48” � � BTri-Level 72” 89060� 72” � � B

HACKSAWS�AND�BLADES

Adjustable Hacksaw 71206� 9"–12" � � A

Bi-Metal Hacksaw Blade 71212� 12" x 18Tpi � � ABi-Metal Hacksaw Blade 71213� 12" x 24Tpi � � ABi-Metal Hacksaw Blade 71214� 12" x 32Tpi � � A(Minimum order quantity of 10 for allhacksaw blades)

HIGH�SPEED�TWIST�DRILLS

High quality twist drills with fully hardenedand regrindable tips

18pc Selector Box – Metric 205226� Set � � A3.0, 4.0, 5.0, 6.0, 8.0, 10.0mm 1 x each size for metal / stone / wood

19pc Selector Box – Metric 816990� Set � � A1mm - 10mm (in 0.5mm steps)

STUD�EXTRACTORS

For easy removal of broken screws and bolts even on flush surfaces

Stud Extractor Set No.2: 3/16"–5/8" 71311� Set � � A

SCREW�PUNCH

Screw punch for distortion free holes in 21832� 32mm � � Asheet materials 21835� 35mm � � A

SAFETY�EQUIPMENT

3 Piece Safety Kit 88890� Each � � AComfort Masks (x10), Heavy Duty RiggersGloves, and Clear Eyeshields

Heavy Duty Riggers Gloves 64990� Each � � A

Foam Knee Pads 88897� Each � � AWith adjustable knee straps

Protective Goggles 88898� Each � � AGrade 1 impact, conforming to EN166 & BS2092/1

Comfort Masks - pack of 10 88899� Each � � A

Clear Eyeshields 88901� Each � � AWith side vents. Conform to EN166.1F


28

Safety Boots and Tool Bags

•Steelcap

•Oilresistantand

acidresistantsole•Anti-slipandanti-shockgrip

•Heatresistantsole(300oC)

•Waterresistantuppers•Genuineleather

•Steelcap

•Oilresistantand

acidresistantsole•Anti-slipandanti-shockgrip

•Heatresistantsole(300oC)

•Waterresistantuppers•Greysuedewithnylonmesh

ROBOOT�Work�Boot

COMFORT�PLUS�Work�Boot

ROBOOT�WORK�BOOT�Size 7� 45407� 7� � � BSize 8 45408� 8� � � BSize 9� 45409� 9� � � BSize 10� 45410� 10� � � BSize 11� 45411� 11� � � BSize 12� 45412� 12� � � B

COMFORT�PLUS�WORK�BOOT�Size 7� ROTH500-7� 7� � � B�Size 8� ROTH500-8� 8� � � BSize 9� ROTH500-9� 9� � � BSize 10� ROTH500-10� 10� � � BSize 11� ROTH500-11� 11� � � BSize 12� ROTH500-12� 12� � � B�

Tool�BagsHeavy�duty,�versatile�tool�bags�for�all�trade�professionals.

HEAVY-DUTY�TOOL�BAG

Heavy-duty, versatile tool bags for all tradesand uses. Ideal for any situation and allconditions.

Features include:•�10 external & 14 internal pockets• Additional 13 retaining loops• Anti-slip rubber base• Heavy-duty, padded shoulder strap• 50kg carrying capacity (large bag)• Heavy-duty polyester construction

Heavy-Duty Tool Bag - Small� 402316� Small� � � BHeavy-Duty Tool Bag - Large� 402317� Large� � � B



29


Pressure Testing Equipment

RP30�PRESSURE�TESTING�PUMP�30 bar pressure testing pump with lightweight 61130� � � � B4.5L tank. Single closing valve, non-returningvalve.Maximum Pressure: 30 bar / 3000kpa / 435psiReplacement Hose (R1/2” BSPT) 61125� � � � BReplacement Gauge� 61123� � � � BO-Ring� 61107� 19.3mm x 2.4mm� � � BReplacement Piston (Plunger)� 61138� � � � B�

RP50-S�PRESSURE�TESTING�PUMPDurable, precision unit for accurately testing all 60200� (Supersedes p/n 61004) � � Btube/pipe systems & pressure vessels. Working partsrust-proofed, 12L tank is galvanised, epoxy coated.

Maximum pressure: 60 bar / 6000kpa / 870psi

Replacement Hose (60 bar, R1/2” BSPT) 61306� � � BReplacement Gauge (60 bar) 61315� � � BReplacement Seal Kits:For RP50 Test Pump (older model) 61309� (Supersedes p/n 61301) � � BFor RP50-S Test Pump (current model) 60201� � � BReplacement Piston (Plunger) 61300� � � � B

RP50-S�INOX�PRESSURE�TESTING�PUMPSame as the RP50-S Pressure Testing Pump, with 60203� � � Ba rust-proof stainless steel tank.

All technicall specifications and spare parts arethe same as the RP50-S.

RP60�PRO�III�ELECTRIC�PRESSURE�TESTING�PUMPNew Electric Test Pump for testing of pipe work 61185� � � � Dsystems in: sanitary & heating, compressed air, steam & cooling, solar & hydraulic & sprinkler systems.Self-priming to 1m.

Maximum pressure 40 bar / 570psi / 4MPaSuction capacity 6 l/min

Replacement Feeding Hose V121060� 2m � � BReplacement Pressure Hose (R1/2” BSPT) V121020� 1.2m � � BPressure Testing Kit 61187� Each � � B

ROTEST�LEAK�DETECTION�SPRAYReliable detection of leaks in joints, appliance connections and gas cylinders

Rotest Leak Detection Spray* 65000� 400ml � � A*Minimum order quantity of 12 required


30

Acoustic�leak�detection�device�for�pipeline�systems.

Suitable for both internal & external use, the ROLEAK Aqua amplifies waterflow sound, enabling leaks to be easily pinpointed.Optical & acoustic display, with wireless headphones.Set consists of: hand unit, headphones, magnet adaptor, pipeadaptor, extension bar & tripod adaptor, in a plastic carrying case.

30

Leak Detection EquipmentROLEAK�AQUA

ListPrice$ ListPrice$ ProdProduct PartNo. Size excl.GST incl.GST GrpROLEAK Aqua Set� 66090� Set� � � B

ROLEAK Aqua Hand Held Unit 66091� Each� � � BHeadphones 66092� Each� � � BExtension Bar 66093� Each� � � BMagnet Adaptor 66094� Each� � � BTripod Adaptor 66096� Each� � � BPipe Adaptor 66097� Each� � � B

Techical�Data:• Filter: 3 fixed filter adjustments (low, broadband, high)• Radio frequency: 864 MHz (device & headphones)• Frequency range: 0-4 kHz• Transmission range: Up to 20m• Operating time: Approximately 50hrs

•Different Adaptors: For�leak�detection�on�various�pipe��materials�&�dimensions

•Wireless technology: Wireless�transmission�of��signal�of�up�to�20m

•Sensitive Microphone: Increases�flow�sound,�enabling��leaks�to�be�pinpointed

•Adjustable Frequency: Also�usable�as�a�ground�microphone

•10 Sound Increments: Optical�&�acoustic�display

•Integrated LED Lamp: Leak�detection�possible�even�in��the�dark

Gas�leak�detection�device.

For detection of gas in rooms, as well as leaks in pipes withthe methane gas sensor.

Key�features:Detects all gases with a CH4 basis (methane, acetone,butane, propane and natural gas)LED display of gas concentration, up to 1% vol.Display: Optical and AcousticPower: 9V BatteryProcessor Controlled

ROTEST�ELECTRONIC�3

ListPrice$ ListPrice$ ProdProduct PartNo. Size excl.GST incl.GST GrpROTEST Electronic 3 Set� 66080� Set� � � B

Sensor 66086� Each� � � BSensor Cover 66087� Each� � � BPlastic Carrying Case 66085� Each� � � B

•Illuminated Sensor Head: Leak�detection�possible�even�in��the�dark

•Adjustable Measurement Sensitivity: Finds�leaks�easily

•Flexible, 420mm Gooseneck: Easily�accesses�hard-to-reach�areas

•Soft Shell Case: Increased�protection


31


Pipe Freezing Equipment

Spare collars, hoses, handles and all other adaptors areavailable upon application to ROTHENBERGER Australia

QUICK-FREEZE�PIPE�FREEZING�SPRAY

An environmentally friendly pipe freezing sprayfor creating temporary ice plugs in any size tubefrom 1/4”–11/8”, avoiding the need to drain down.

Quick-Freeze Pipe Freezing Spray 64000� 300g � � AQuick-Freeze Pipe Freezing Spray* 64001� 500g � � A*Minimum order quantity of 12 required

Pipe Freezing Jacket 1/4”–11/8” 64002� Each � � A

FREEZE-PAK�PIPE�FREEZING�KIT

Consists of a 500g can of Quick-Freeze, 64004� Set � � Atwo pipe freezing jackets and four cable ties.

ROFROST�HANDY�FREEZING�SET

Efficient freezing in minimal space. Environmentallyfriendly, ideal for all domestic applications.Set comes complete with 3 x 500g cans ofQuick-Freeze Spray.

Rofrost Handy Pipe Freezing Set� 64020A� Set� � � B1/2”, 5/8”, 3/4”-7/8”, 1”-11/8” (copper) &1/4”, 3/8”, 1/2”, 3/4” (steel)

Foam Sheets (spare)� 64026� Each� � � B

SUPER-FREEZE�PIPE�FREEZING�SETS

Uses environmentally friendly disposable liquid-refrigerant cylinders. Industrial efficiency at abudget price.(Note: Super-Freeze sets do not include gascylinders - please order separately).

Super-Freeze Pipe Freezing Set 1 80010� Set � � A10-12, 15, 22, 28, 35mm (copper) &1/4”, 3/8”, 1/2”, 3/4”, 1”-11/4” (steel)

Super-Freeze Pipe Freezing Set 2 64950� Set � � A10-12, 15, 22, 28, 35, 42, 54mm (copper) &1/4”, 3/8”, 1/2”, 3/4”, 1”-11/4”, 11/2”, 2” (steel)

Super-Freeze Refrigerant Cylinders 64941� 700g � � A

ROFROST�CO2�PIPE�FREEZING�SETS

Uses extremely economical industrial�CO2 cylindersproducing temperatures down to -79°C. ROFROSTCO2 sets are fast, efficient and very cost effectiveusing 40% less CO2 than jacket type systems.(Note: Rofrost CO2 sets do not include gas cylinders.Please specify liquid withdrawal type CO2 from yourlocal industrial gas supplier).

Rofrost CO2 Pipe Freezing Set 65030� Set � � B1/2”, 5/8”, 3/4”-7/8”, 11/8”, 13/8”, 15/8”, 21/8” (copper) &1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1”, 11/4”, 11/2”, 2” (steel)

Spare Hoses 65033 Each � � BSpare Handle, feed valve & bayonet connection 65032� Each � � BFilter Set 65048� Each � � BT-Piece with bottle connection 65034� Each � � B


32


Pipe Freezing Equipment

• In addition to copper and steel, can I freeze plastic and lead pipes? Yes, but plastic and lead will take longer to freeze, typically 1.25–3 times longer than copper tube, depending on the type of pipe freezer used.

• Can you freeze in any position (on vertical pipes as well as horizontal runs)?Yes. All ROTHENBERGER pipe freezers will freeze both vertically & horizontally, however wherever possible a horizontal set up is more effective and efficient.

• Can I freeze moving water? No, not really. All pipe freezers will arrest and freeze moving water if it is a drip or trickle. However it is not safe to make a general statement that moving water can be frozen with any standard off-the shelf pipe freezing product. It is possible to freeze running water with liquid nitrogen, but this should only be performed by specialist cryogenic freezing contractors.

• Can I freeze hot water? Theoretically, yes, but it is more difficult than freezing cold water and, due to the high probability of convection currents in hot water, is not recommended.

• How will I know when the pipe is frozen? Firstly, follow the freezing tables/times which are clearly displayed on all ROTHENBERGER pipe freezing products. These are based on a safety first principle! Secondly, visual signs of freezing will be apparent around the freeze head (or jacket) and on the hoses.

If you are in any doubt, allow a few extra minutes to the stated freezing time, just to be sure.

• Will the ice plug burst the pipe? No. As the water turns to ice it will fill the pipe from the outside diameter, working inwards to the centre. Once the full bore has turned to ice, the plug will then spread along the pipe work system as opposed to trying to expand further outwards and pushing the wall of the pipes. The only exception to this rule is when freezing close to a stop-end fitting or a closed valve which should be avoided – freeze at least 18” from either of these situations.

• Will the ice plug withstand mains pressure? Yes. All ROTHENBERGER pipe freezing systems will produce ice plugs to withstand a minimum pressure of 120psi / 10 bar.

• How long will the freeze last? It generally takes 10-30 minutes for an ice plug to melt once the pipe freezer is turned off or removed. By periodically ‘topping-up’ the gas, or keeping gas flowing on a reduced ‘trickle’ basis the ice plug will remain solid and will not melt. The same effect is achieved with our electric pipe freezers by leaving them permanently switched on.

• Can I solder close to an ice plug? In general it is preferable to use compression type fittings whenever possible when using a pipe freezer. If you do have to solder then it is wise to be at least

18” from the ice plug to prevent any premature thawing and to allow the solder to run smoothly.

• Will extreme high temperatures in hot weather stop the freezer from working? The formation of an ice plug will take a longer time in hot environments and continuous freezing is required to maintain the plug once formed. Pipe freezing may prove difficult at high ambient temperatures and is not normally possible at above 40°C without liquid nitrogen, which should only be used by specialists.

• How many freezes will I get from my bottle(s)? Please see the gas consumption details in the table below, relating to the type and size of cylinder used.

• Are there any general good tips to follow? Yes. Always check for the following points: -A clean, grease and paint free surface. -Ensure that all circulatory pumps are switched off and that the water is cold and stationary. -Follow instructions and freezing tables to the letter! -Check that you have sufficient gas to complete your job before starting – once you cut in to the pipe there is no going back! -Do not smoke when using ROTHENBERGER pipe freezers.

Remember, help is always at hand – if you find yourself unsure or in difficulties – call ROTHENBERGER on 1800 186 657 (toll free).

PIPE�FREEZING�-�YOUR�QUESTIONS�ANSWERED

FREEZING�TIMES�AND�GAS�CONSUMPTION�TABLE

ROFROST�TURBO�II�ELECTRIC�PIPE�FREEZER

Rapid and reliable pipe-freezing with advancedfeatures including easy-fit freezing heads withinbuilt temperature displays. Machines aresupplied with heat-conducting alloy adaptorsand 2 hoses with easy-fit master clamps.

Rofrost Turbo II (240V) 62206� Set � � B1/2”, 7/8”, 13/8”, 21/8” (copper) &1/4”, 3/8”, 1/2”, 3/4”, 1”, 11/4”, 11/2”, 2” (steel)

Rofrost Turbo Master clamp 11/4" F86611� Each � � DRofrost Turbo Master clamp 2" F86710� Each � � D

ROFROST�HEAT�CONDUCTING�PASTE

Heat conducting paste, required for use with ROFROST TURBO II master clamps and adaptorinserts for fast and efficient freezing.

ROFROST Heat Conducting Paste 62291� 150ml � � B

CopperTube SteelPipe Freezing Coolant Diameter Diameter Time(mins) Usage

QUICK-FREEZE 3/8”, 1/2”, 5/8” 1/4”, 3/8”, 1/2” 10 1 x 300g CanAerosolSprays 1/2 x 500g Can 3/4”, 1” 3/4”, 1” 10 1 x 500g Can

ROFROSTHANDY 1/2”, 5/8” 1/4”, 3/8” 5 1 x 500g CanPipeFreezingSet 3/4”-7/8” 1/2” 7 2 x 500g Cans 1”-11/8” 3/4” 10 3 x 500g Cans

SUPERFREEZE 10-12mm 1/4” 2 90gPipeFreezingSets 15mm 3/8” 3 120g 22mm 1/2” 5 300g 28mm 3/4” 7 400g 35mm 1”-11/4” 10 600g 42mm 11/2” 15 700g 54mm 2” 25 1150g

ROFROSTCO21/2” 1/8” 3 170g

PipeFreezingSet 5/8” 3/8” 4 200g - 1/4” 5 1000g 3/4”-7/8” 1/2” 6 1400g 11/8” 3/4” 8 1500g 13/8”, 15/8” 1”, 11/4” 14 1600g - 11/2” 17 1700g 21/8” 2” 40 Conditional

CopperTube SteelPipe Freezing Coolant Diameter Diameter Time(mins) Usage

ROFROSTTURBO2 3/8” 1/8” 5 -PipeFreezingSet 1/2” - 6 - - 1/4” 7 - 5/8” 3/8” 8 - 3/4” - 10 - 7/8” 1/2” 11 - 1” 3/4” 15 - 11/8” - 18 - 11/4” - 20 - 13/8” 1” 25 - - 11/4” 35 - - 11/2” 45 - 21/8” - 55 - - 2” 80 -

This freezing table is published as an approximate guide only. Several varying factors such as pipe material, pipe contents and ambient temperatures can affect the time

required for a suitable ice plug to form. Times and consumption rates in this table are based upon pipes filled with stationary cold water at an ambient temperature of 20°C. Stainless steel, lead and plastic pipes will take longer to freeze than steel or copper pipe – we strongly recommend that you add at least 25% to the freezing times indicated in this table. Freezing times also need to be increased at high ambient temperatures and pipe freezing may prove difficult in extreme hot weather or environments above 40°C.


33


Soldering and Brazing Equipment

MAINTENANCE�ADVICE�(for�all�torches�illustrated�on�this�page)

For a longer working life of your ROTHENBERGER torch, please note the following advice:- NEVER store your torch on the gas bottle for long periods.- Always keep your torch upright when connected to a gas cylinder.- Your torch requires regular cleaning and maintenance, especially

the burn tube, burn tip and jet (you should do this approximately every 4-6 weeks, depending on usage).

SERVICING�-�FOR�SUPER�FIRE�2For a small fee, we will service your ROTHENBERGER torch with genuine ROTHENBERGER parts, and return it as good as new. (All repairs are quoted before any work is completed.)

POWER�FIRE�COMPACT�BRAZING�TORCHNEW, compact, professional brazing torchfor MAP / Pro gas.Piezo ignition, and precise flame adjustment, with 360o working range.Compact design, with a robust body and steelCyclone Burner burn tube for maximum heat.

Power Fire Torch 30813� � � B

SUPER�FIRE�2�BRAZING�TORCH

Concentrated high heat, anti-flare, adjustable flame with powerful turbine flame pattern. Equipped with instant piezo ignition, theSuper Fire 2 is fast and effective for all solderingand brazing applications, and can be operatedwith either the disposable Propane or MAP / Pro gas cylinders

Super Fire 2 Torch 35644� � � B

SUPER�FIRE�3�BRAZING�TORCHThe next generation in portable brazing torch, the Super Fire 3 is the most complete torch available.Equal or better performance than the SuperFire 2, with a wider range of options. Features include piezo ignition, ability to work soaked in water, 'Twist 'n' Load' rapid exchange burners, metal construction and precision flame adjustment. Super Fire 3 Torch comes complete with: Cylinder Collar, Cyclone Burner, Pin Point Burner and Cylinder Safety Stand.

Super Fire 3 Torch 35430� � � BApprox Temperatures using MAP / Pro Gas: 2400oC;Propane: 1900oC

DISPOSABLE�GAS�CYLINDERSIndustrial grade gasses in tough impact resistant disposable steel cylinders (also suitable for other brand appliances with similar thread and valve connection).

MAP / Pro gas cylinder* 35663� 399.7g Each � � BPropane gas cylinder* 35664� 400g � � B*Minimum order quantity of 12 required

Gas Cylinder Safety Stand � 35461� Each� � � B

Soldering and Brazing Equipment



34

SUPER�FIRE�3�HOTBOX

2 x MAP / Pro Gas (35663)

Super Fire 3 Brazing Torch (35430)

Pin Point Burn Tube (35455)

Gas Cylinder Safety Stand (35461) Heat Guard (31043)

SUPER�FIRE�3�HOTBOX�

Includes: Super Fire 3 Torch, Cyclone Burn 35490U� Kit� � � BTube, Pin Point Burn Tube, Heat Guard, GasCylinder Safety Stand and 2 x MAP / Pro Gas.

HEAT�DEFLECTOR�GUARD

To prevent scorching walls, skirting boards etc. 31042� SF2 & Quick Fire � � B 31043� SF3 only� � � B

SOLDERING�MAT

Protection for all surfaces when soldering 67022 12” x 12” � � A up to temperatures of 750°C.Completely asbestos-free.(Use with Heat Deflector Guard for best�results at higher temperatures).

SILVER�SOLDER�(GUARANTEED�CONTENT,�WATERMARK�CERTIFIED).�PRICES�ON�APPLICATION

S2 SOLDER L-Ag2P 40212-R2.5 2.5mm x 750mm (round) Yellow TippedSpecial quality Silver Solder GUARANTEED to: 40212-R3.0�� 3.0mm x 750mm (round) Yellow TippedAS1167.1-B2 and DIN 8513 and AS/NZ3500

S5 SOLDER L-Ag5P 40005-R2.5� 2.5mm x 750mm (round) Silver TippedSpecial quality Silver Solder GUARANTEED to: 40005-R3.0� 3.0mm x 750mm (round) Silver TippedAS1167.1-B3 and DIN 8513 and AS/NZ3500

S15 SOLDER L-Ag15P 40015-R2.5 2.5mm x 750mm (round) Brown TippedSpecial quality Silver Solder GUARANTEED to: 40015-R3.0� 3.0mm x 750mm (round) Brown TippedAS1167.1-B4 and DIN 8513 and AS/NZ3500

Watermark�Certified

The�ideal�portable�soldering�and�brazing�kit.

Contains a Super Fire 3 Torch, Cyclone Burn Tube,Pin Point Burn Tube, Heat Guard, Gas Cylinder SafetyStand and two cylinders of MAP / Pro Gas. Hotbox Kit comes in a convenient hard plastic carry case.

Hotbox�Kit�comes�complete�with:


35


Soldering and Brazing Spares and Accessories

B

A

C D

ADAPTORS�TO�FIT�GAS�CYLINDERS

Primus 2000 A 35652� SF2, SF3 & Quick Fire � � B

Propane hose adaptor B (threaded) 35647� SF2, SF3 & Quick Fire � � B

SPARE�PARTS�FOR�SUPER�FIRE�2�&�QUICK�FIRE�TORCHES

Turbine Flame Burner C (Std with SF2) 35661� Super Fire 2 � � BSwirl Flame Burner & Jet D 35662�� Super Fire 2 & Quick Fire � � � B

Burn Tube, Allen Key and Grub Screw 35659� � � B

Piezo Ignition Unit 35660� � � B

Repair Kit � 99998� � � � BContains burn tube, piezo ignition, flamecontrol knob and jet, springs, screws, buttons& seals.

SPARE�PARTS�FOR�SUPERFIRE�3

Pin Point Burn Tube (Incl. with SF3)� 35455� � � � B�Standard Burn Tube� 35456� � � � B�Cyclone Burn Tube 14mm (Std with SF3)� 35457� � � � B�Shrink Burn Tube � 35459� � � � B�Hot Air Burn Tube� 35458� � � � B

Superfire 3 Torch body only� 35446� � � � B�

Superfire 3 Gas cylinder Collar� 35462� � � � B�

CONTRACTORS�PROPANE�TORCH�SET

Standard propane burner with threaded 22mmcoupling, 2.5m propane hose with 3/8”L coupling.ROTHENBERGER Propane Torch Sets are supplied in attractive blister display packaging.

Contractors Propane Torch Set 33334� Set � � B

INDUSTRIAL�TORCH�SET

High temperature industrial torch sets supplied in professional steel storage case.

Turboprop Propane Brazing Torch Set 31037� Set � � BFor industrial soldering up to 21/8"Ø and brazing up to 11/8"Ø at up to 2200°C. Includes3 stainless steel nozzles with bayonet connection, hose, spanner and regulator.



36

Soldering and welding Equipment

INDUSTRIAL�TORCH�SET�ACCESSORIES

High Pressure Propane Regulator POL 7/8" LH 2422030� 0–6 bar � � B

2.5m Propane Hose with 3/8"LH Connections 32201� 3/8"LH � � B

Safety Spark Lighter 32077� � � B

Pack of 5 Lighter Flints 32088� � � B

NOZZLE�CLEANER

10pc, in folding case. 510105� � � � A

MAGNETIC�WELDING�MIRROR

With flexible metal hose and socket joint. 540855� � � B

ROVLIES�CLEANING�PADS

Completely metal free for reduced�risk of 45268� � � Acorrosion. Can be used wet or dry and arenot affected by solvents. Pack of 10.

ROFLAME�PIEZO�1800°C

Complete with 22mm windproof burner and 35931� � � � Bpiezo ignition. Can be used upside downwithout flaring.(C200 Supergas cartridge not included).

C200�SUPERGAS�BUTANE�CARTRIDGE

For use with Roflame Piezo 1800 torch. 35900� 190 grams � � BAlso suitable for use with camping burnersand other similar appliances**Minimum order quantity of 36 required.

ROFIRE�PIEZO�1950°C

Powerful soldering unit for up to ø 28mm,with piezo ignition and flame adjustment.

Rofire Piezo 1950 Set (inc. 1x Multigas 300) 35555� Set � � BRofire Piezo 1950 Torch only 35556� Each � � B

MULTIGAS�300�GAS�CYLINDER

Disposable gas cylinder for Rofire Piezo 1950. 35510� 600ml � � BAlso fits other brands of gas torches, campingstoves, lanterns and other similar appliances.Propane / butane mix.*Minimum order quantity of 24 required


37


Plastic Pipe Shears and Cutters

RATCHET�PIPE�SHEARS

Ratchet action cutters provide a fast, clean square cut in most types of plastic pipe including MDPE, PE, PP, PB and PEX.

Ratchet Pipe Shear 32 55090E� 0–32mm� � � ARatchet Pipe Shear 42 55091E� 0–42mm � � ARatchet Pipe Shear 63 55095E� 0–63mm � � B

Replacement Blade for Ratchet Pipe Shear 32 50032� Each � � ASpare Parts Kit Ratchet Pipe Shear 32 (exc Blade) 081332� � � � B

Replacement Blade for Ratchet Pipe Shear 42 50042� Each � � ASpare Parts Kit Ratchet Pipe Shear 42 (exc Blade) 081337� � � � B

Replacement Blade for Ratchet Pipe Shear 63 50063� Each � � BSpare Parts Kit Ratchet Pipe Shear 63 (exc Blade) 081340� � � � B

PROFESSIONAL�PIPE�SHEARS

Rugged precision shears for effortless cuttingof plastic pipes. Designed for waste pipe, PP,PE, PEX, PB & PVDF.

Rocut 26TC 52005� 0–26mm� � � A

Rocut 32TC 52040� 0-32mm� � � A��Replacement Blade for Rocut 32TC� 52041� Each� � � A

Rocut 42TC 52000� 0–42mm� � � AReplacement blade for Rocut 42TC 52042 Each � � A�

Rocut 50TC� 52010� 0-50mm� � � AReplacement blade for Rocut 50TC� 52011� Each� � � A

Rocut 63TC� 52030� 0-63mm� � � A�Replacement Blade for Rocut 63TC� 52031� Each� � � A

Rocut 75TC� 52015� 0-75mm� � � A�Replacement Blade for Rocut 75TC� 52016� Each� � � A

PLASTIC�PIPE�CUTTERS

Fast precision cutting of all thick wall plastictubing (incl. waste pipe). Spring-loaded actionfor fast adjustment from size to size. (Will also cut copper tube with alternative cutter wheel).

Automatic Pipe Cutter PL1 70031� 6–67mm � � AAutomatic Pipe Cutter PL2 70032� 50–125mm � � A

Cutter Wheel for PL1 – each 70028� 67mm � � ACutter Wheel for PL2 – each� 55054� 125mm � � A

MULTI-LAYER�TUBE�CUTTER

Multi-Layer plastic tube cutter designed to cutmulti-layered PE, PP, & PVDF, and PVC hardplastic tube.

TC 35 MSR 70108 6-32mm � � ASpare Cutting Wheel� 70188�� Each� � � A

Designed�for,�and�sold�exclusively�by�ROTHENBERGER,�this�simple�yet�innovative�product�cuts�most�types�of�plastic�pipe,�including�MDPE,�PE,�PP,�HEP20�and�PEX.

A�new�twist�on�plastic�pipeThe revolutionary PLASTICUT is a simple to use plastic pipe cutter, designed for both professional and DIY use.

Easy�to�useSimply click the PLASTICUT into place, grip FIRMLY, and rotate around the pipe in direction of the arrows. Pipe will be cut clean and square after 1-2 rotations - even multi-layer pipe.The unique design, with no moving parts, is safe, lightweight and ideal for use in confined spaces.

Features•Cuts clean and square•Ideal for confined spaces•Lightweight•Safer than saws or shears•Simple to use•Professional and DIY use•Each cutter family is colour coded for easy recognition•Each cutter size is clearly marked

Plastic Pipe Cutters Pipe�Cutters

TM

Cutsclean&square

Idealforconfinedspaces

Saw

TM

Shears


38

Please�see�next�page�for�a�breakdown�of�relevant�applications�for�each�Plasticut


DOMESTIC�PIPE�(RED)PLASTICUT 16mm (Blade) 59060A� 16mm � � APLASTICUT 16mm (Wheel) 59016XA� 16mm � � A

PLASTICUT 20mm (Blade) 59020A 20mm � � APLASTICUT 20mm (Wheel) 59020XA� 20mm � � A

PLASTICUT 25mm (Blade) 59025A� 25mm � � APLASTICUT 35mm (Blade) 59035A� 35mm � � A

WASTE�PIPE�(GREY)PLASTICUT 40mm (Blade) 59042A� 40mm � � APLASTICUT 50mm (Blade) 59050 50mm � � A

NEW!


39

Plastic Pipe Cutters Plasticut�Sizing�and�Pipe�TableFor�relevant�applications�and�uses�of�all�Plasticuts

Plasticut Sizing and Pipe Table

Domestic Pipe (rED) waste Pipe (GrEY)

Part No. 59060A(16mm)Blade

Part No. 59016XA(16mm)Wheel


Part No. 59020XA(20mm)Wheel


Part No. 59035A (35mm)Blade


Part No. 59050(50mm)Blade

Pex Pipe (water)

16mm Rehau YES

20mm Rehau YES

16mm Auspex YES

20mm Auspex YES

16mm K2 Iplex YES

20mm K2 Iplex YES

Pex Pipe (Gas)

16mm Duopex (Auspex) YES

20mm Duopex (Auspex) YES

16mm Gaspex YES

20mm Gaspex YES

16mm K1 Iplex YES

20mm K1 Iplex YES

PVC Pressure Pipe (Drain Pipe)

15mm PVC Pressure Pipe YES



PVC Drainage Pipe (waste Pipe)

40mm DWV YES

50mm DWV YES

Electrical Conduit

16mm Conduit (grey/orange) YES



This simple yet innovative product cuts most types of plastic pipe including MDPE, PE, PP, HEP20 and PEX.Each cutter family has been colour coded for easy recognition (see table below) and each cutter is clearly marked to indicate size.



40

Tools and Equipment for Plastic Pipe Installation

Other�machines�are�availableROTHENBERGER has a large range of butt fusion machines available from sizes 160mm - 1200mm.

For more information please give our sales department a call on 1800186657.

Grip ring for insertion and pulling out of the tube

Entry taper for clean entryinto the tube

PLASTIC�PIPE�CUTTING�&�CHAMFERING�TOOLS

Self-contained cutting and chamfering tools for a fast guaranteed 90° square cut and perfect 15° chamfer

Rocut 110 Tool (Reamer sold separately) 55020� 110mm � � BRocut 160 Tool (Reamer sold separately) 55030� 160mm � � B

Rocut 160 Reducing Insert 110mm 55033� 110mm � � B

Reamer for Rocut 110 & 160 55018 Each � � B(Includes a 21652 blade)

Spare carbide cutter blade 15° (Rocut 110) 55029� 7.5mm wall � � BSpare carbide cutter blade 15° (Rocut 160) 55019� 12.5mm wall � � B

MSR�INTERNAL�BENDING�SPRINGS

Stainless steel springs for hand bendingmultilayer tube. Sturdy and long-lasting, withno shortening within the bend radius. 650mmlong.

MSR Bending Spring 12mm 25441� � 12mm� � �� AMSR Bending Spring 14mm� � 25442� � 14mm� � �� AMSR Bending Spring 16mm� � 25443� � 16mm� � �� AMSR Bending Spring 18mm� � 25444� � 18mm� � �� AMSR Bending Spring 20mm� � 25445� � 20mm� � �� AMSR Bending Spring 25/26mm� � 25446� � 25/26mm� � �� A��

MAXI�BENDER�MSR

One handed bender for precision bendingup to 90° of aluminium multilayer tubes

For Multilayer & MSR Plastic Pipe� 23095� Set� � � B14, 16, 18, 20, 26, 32mm

For Copper, Aluminium & Steel Pipe (see pg.10) 23022 Set � B

P160�BUTT�FUSION�WELDING�MACHINE

Versatile mobile unit with universal master clampset for pipe-to-pipe and pipe-to-fitting use, powerdrive face trimmer and electronic regulated heatingplate, storage case and mobile working frame. Guaranteed weld seams of unsurpassed strength,suitable for use with pressure pipesWelding capacity: (Supersedes PN 54000)PN2.5–PN16 Ø40–110mmPN2.5–PN10 Ø40–140mmPN2.5–PN6 Ø40–160mm

ROWELD® P160 saniline complete 240 Volt 54004� ø40–160mm � � C

Pipe and Drain Cleaning EquipmentELECTRIC�DRAIN�CLEANING�MACHINESExceptionally�powerful�drain�cleaning�machines�requiring�only�one�man�operation.

All machines have high RPM, with full power delivered to a wide range of cleaning heads. Ideally suitedfor rough use and in extreme working conditions, and capable of tackling almost any type of blockageor obstruction.


41

R550 Drain Cleaner � 72655A� 240V� � � D(machine only)5/8” Spiral Tool Set� 72945� Set � � D

Note: For complete drain cleaning set, please order both 72655A and 72945.


R550�DRAIN�CLEANING�MACHINEFor pipes up to 100mm Ø.

Cables:With direct take-up: 5/8” dia. cablesWith adaptor: 5/16” and 3/8” dia. cablesMaximum working length: 40m with 5/8” dia. cables 10m with 5/16 ” and 3/8” dia. cables

Motor: 0.25kW (0.34HP) Exceptionally quiet operation, powerful cleaning action for all types of cleaning and root / deposit cutting.

Spiral Tool Set: 5/8" Spiral & Tool Set: 5 x Spirals (5/8” x 8’); 1 x each of Spiral Basket, Guide Hose, Guide Glove, Straight Drill, Bulb Head Drill, Blade Drill, Separating Key, Rowonal Spray.

R650 Drain Cleaner � 72670� 240V� � � D(machine only)7/8” Spiral Tool Set� 72955� Set � � D

Note: For complete drain cleaning set, please order both 72670 and 72955.



Cables:With direct take-up: 7/8” and 5/8” dia. cablesMaximum working length: 65m with 7/8” dia. cables 55m with 5/8” dia. cables

Motor: 0.8kW (1.1HP) Ideally suited for rough use, and extreme working conditions. Exceptionally quiet and powerful, and perfect for root cutting and grinding out cement and lime deposits.

Spiral Tool Set: 7/8" Spiral & Tool Set: 5 x Spirals (7/8” x 15’); 1 x each of Spiral Basket, Guide Hose, Guide Glove, Straight Drill, Funnel Drill, Shark Tooth Cutter, Shovel Drill, Bulb Head Drill, Separating Key.

Pipe and Drain Cleaning Equipment


42

Electric�Drain�Cleaning�MachinesExceptionally�powerful�drain�cleaning�machines�requiring�only�one�man�operation.

All machines have high RPM, with full power delivered to a wide range of cleaning heads. Ideally suitedfor rough use and in extreme working conditions, and capable of tackling almost any type of blockageor obstruction.

R750 Drain Cleaner � 72904� 240V� � � D(machine only)11/4” Spiral Tool Set only� 72963� Set � � D

Note: For complete drain cleaning set, please order both 72904 and 72963.



Cables:With direct take-up: 11/4” and 7/8” dia. cablesWith adaptor: 5/8” dia. cablesMaximum working length: 80m with 11/4” dia. cables 70m with 7/8” dia. cables 55m with 5/8” dia. cables

Motor: 0.9kW (1.23HP) Robust and powerful motor for all drain cleaning, clearing and root cutting applications.

Spiral Tool Set: 11/4" Spiral & Tool Set: 5 x Spirals (11/4” x 15’); 1 x each of Spiral Basket, Guide Hose, Guide Glove, Straight Drill, Funnel Drill, Shark Tooth Cutter, Shovel Drill, Retriever Drill, Separating Key, Rowonal Spray.

SP-TRANSPORTERRobust transporter for R750 drain cleaning machine.Extended ‘trolley’ handles and rubber wheels for efficient, low-energy use on any site.

Transporter can be purchased as part of the R750 kit, or bought seperately for easy retro-fit to existing machines.

Note: SP-Transporter does not come with R750 Drain Cleaner or Spiral Tool Set, which need to be purchased seperately.


SP-Transporter� 72906� Each� � � C

Pipe and Drain Cleaning Equipment


43


STANDARD�SPIRALS�(CABLES)

Flexible cables for general purpose cleaning workwith normal loading. Easy operation, even withtight or successive pipe bends.

Standard Cable 8’ (2.3m) 72431 5/8” / 16mm � � CStandard Cable 15’ (4.5m) 72441 7/8” / 22mm � � CStandard Cable 15’ (4.5m) 72451 11/4” / 32mm � � C

SMK�SPIRALS�(CABLES)

Temperature resistant, weatherproof cableswith a robust core, preventing clogging of cablewith debris and improving strength and stiffness.

SMK Cable 8’ (2.3m) 72433 5/8” / 16mm � � CSMK Cable 15’ (4.5m) 72442 7/8” / 22mm � � CSMK Cable 15’ (4.5m) 72452 11/4” / 32mm � � C

11/4”�TRAP�LEADER

Trap leader for allowing 11/4” cables to passthrough tight radius bends. Trap leader is 11/4”at each end and 7/8” in the middle.

Trap Leader 2’ 72465 11/4” � � C

SPIRAL�SEPARATING�KEY

For uncoupling cables and cable tools.

Separating Key for 5/8” couplings 72100 5/8” � � CSeparating Key for 7/8” & 11/4” couplings 72465 7/8” & 11/4” � � C

CABLE�BASKETS

Safe storage and convenient transport for alldrain cleaning cables. Perfectly suited for cleaningand preservation of cables.

Cable basket for 5/8” cables - up to 34.5m 72110 5/8” � � CCable basket for 7/8” cables - up to 22.5m 72112 7/8” � � CCable basket for 7/8” & 11/4” cables - up to 18m 72111 7/8” & 11/4” � � C

GUIDE�GLOVES

Studded Guide Glove (Left) 72120 Each � � C�Studded Guide Glove (Right) 72121 Each � � C


Pipe and Drain Cleaning Accessories


44

STRAIGHT�DRILLS5/8" Straight Drill 72161� 1”–3” � � C7/8" Straight Drill 72221� 2”–4” � � C11/4" Straight Drill 72321� 3”–10” � � C

BULB�HEAD�DRILLS5/8" Bulb Head Drill 72163� 11/2”–3” � � C�7/8" Bulb Head Drill 72263� 2”–4” � � C11/4" Bulb Head Drill 72363� 3”–10” � � C

HOOK�RETRIEVER�DRILLS5/8" Hook Retriever Drill 72162� 2”–3” � � C�7/8" Hook Retriever Drill 72203� 3”–6” � � C11/4" Hook Retriever Drill 72325� 3”–10” � � C

FUNNEL�RETRIEVER�DRILLS5/8" Funnel Retriever Drill 72165� 2”–4” � � C7/8" Funnel Retriever Drill 72222� 4”–6” � � C�11/4" Funnel Retriever Drill 72322� 4”–10” � � C

DOUBLE�FORK�BLADE�CUTTER5/8” Double Fork Blade Cutter 72154� 2”–4” � � C

GREASE�CUTTER5/8” Blade Drill� 72171� 21/2”–4” � � C

SHOVEL�DRILLS7/8" Shovel Drill 72261� 4”–6” � � C�11/4 Shovel Drill 72360� 4”–6” � �� C

CROSS�BLADE�DRILLS5/8" Cross Blade Drill 72177� 3”–4” � � C7/8" Cross Blade Drill 72276� 4”–6” � � C�11/4 Cross Blade Drill 72376� 5”–8” � � C

SHARK�TOOTH�CUTTERS�(Serrated Forked Cutters)7/8" Shark Tooth Cutter 72250� 4”–6” � � C11/4" Shark Tooth Cutter (3”) 72350� 6”–8” � � C11/4" Shark Tooth Cutter (4”) 72351� 6”–10” � � C

3" Replacement Shark Tooth Blade 72258� 4”–6” � � C�4" Replacement Shark Tooth Blade 72259� 6”–8” � � C

SPIRAL�SAW�TOOTH�CUTTER5/8” Spiral Saw Tooth Cutter� 72166� 2”–3” � � C

TWO�WAY�ROOT�CUTTERS7/8" x 21/2" Two Way Root Cutter 72265� 3”–4” � � C�11/4" x 31/2" Two Way Root Cutter 72366� 6”–8” � � C

CHAIN-SPINNING�HEAD5/8” Chain-Spinning Head� 72185� 2”–5” � � C

EXPANSION�CUTTER

11/4” Expansion Cutter� 72332� 3”–5” � � C



45

Pipe and Drain Cleaning Accessories

CLUTCH�jAWS

All Clutch Jaws come in sets of 3.

R550 (up to serial no. 411541) 72536� Set of 3 � � CR550 (from serial no. 411542) 72538� Set of 3 � � C

R650 (up to serial no. 409000) 72666� Set of 3 � � CR650 (from serial no. 409001) 72638� Set of 3 � � C

R750 72563� Set of 3 � � C

CABLE�DRIVE�ADAPTOR

Drive Adaptor for R750 Drain Cleaner 72915� Each� � � Cto take 5/8” cables (spirals).

GUIDE�HOSES

Replacement Guide Hose for R550 72540 Each � � CReplacement Guide Hose for R650 72541 Each � � CReplacement Guide Hose for R750 72559� Each � � C

ROWONAL

For removing rust from and preserving alldrain cleaning cables.

Rowonal Maintenance Spray* 72142� 200ml � � CRowonal Maintenance Fluid 72140� 5L � � C*Minimum order quantity of 12 required

DRAIN�CLEANER�SIDE�COVERS

Side Cover R650 (with handle hole)� L20297� Each� � � CSide Cover R650 (with no handle hole)� L20298 Each� � � C

Side Cover R750 (for either side) H99053� Each� � � C

ROPUMP�FORCE�PUMP

Force pump cleaner for effective blockage 71991� 2” max. � � Bremoval in sinks, baths & showers usingwater / air pressure.

ROPUMP�SUPER�PLUS

Professional force pump for quick and efficient 72070X� 4” max� � � Bblockage removal in sinks, baths, showers and toilets. Complete with adjustable�handle, two adaptors, ergonomic hand grip, and dual sided sealing for greater suction

ROSPI�H+E�PLUS

Professional drain cleaning units for basins, sinks,baths and showers. For use by hand or with avariable speed electric drill.

Rospi 8 H+E Plus (5/16” x 25’ spiral) 72095� 1/2"–3" � � BReplacement spiral 72412� 5/16” x 25’ � � B

Rospi 10 H+E Plus (3/8” x 33’ spiral) 72005� 1/2"–3" � � BReplacement spiral 72422� 3/8” x 33’ � � B

Note: Rospi units are not designed for cleaningtoilet pans, or for pipe work above 3" Ø.



46

Pipe and Drain Cleaning EquipmentROSPIMATICPipe�Cleaning�machine�with�automatic�feed

Portable, electric cable spinning machine, for professional pipe cleaningof basins, sinks, baths and showers etc.Smart and durable design for long lasting use.

Technical�Details:Cable: 8mm x 7.5mFor pipes: 20mm - 50mm ØPower: 630wSpeed: Up to 950rpmWeight: 5kgSize: 560 x 200 x 320mm (excluding spiral)

Key�Features:

•� Ideal weight distribution for continual use• Light weight, only 5kg• Forward and reverse applcation (clockwise / anti-clockwise)•�Increased safety to to stationary hand grip•�Ideal weight distribution

•�Unique�feeding�unit�USP Quick & comfortable changing between forward & reverse

•�Universal�cable�drum For use with several cable types

•�Powerful�drill�with�right��&�left�drive For professional use

•�Large�cable�lock Easy to handle, even while wearing gloves

•�Compact�design��Difficult to access pipes can be reached easily

•�Ergonomic�handle�USP Ideal for extended use, comfortable use even with gloves

•�Electronic�speed�control�USP Adjustable depending on the job

ROSPIMATIC�PIPE�CLEANING�SET

Set includes a Rospimatic Pipe Cleaner with 8mm� 19204� Set� � � Bx 7.5m Bulb Head Cable, 8mm x 7.5m Cable with3/8” Coupling, Tool Set, Guide Hose, 200mlRowonal Spray and Plumbers Tool Bag.

Rospimatic Pipe Cleaning Machine only 78576� Each� � � Bwith 8mm x 7.5m Bulb Head Cable

Replacement 8mm Cable with 3/8” Coupling 72425� Each� � � CReplacement 8mm Cable without Coupling 72413� 8mm x 7.5m� � � C

Tool Set 72942� Set� � � CReplacement Grease Cutter 3/8” 72764� Each� � � CReplacement Cross Blade Cutter 3/8” 72765� Each� � � CReplacement Ball Head Cutter 3/8” 72766� Each� � � CReplacement Separating Key 3/8” 72102� Each� � � C

Guide Hose 72542� 25mmØ x 500mm� � � C

Rowonal Spray 72142� 200ml� � � C

Plumbers Tool Bag 402314� Each� � � B

•�Steel-core�spiral� Efficient and effective removal of build-up and blockages

NEW!Rospimatic�Pipe�Cleaning�Set,�complete�with�each�Rospimatic�Pipe�Cleaning�Machine.

Set includes:• Rospimatic Pipe Cleaning Machine•�Additional 8mm x 7.5m cable, with 3/8” coupling•�3/8” Grease Cutter•�3/8” Cross Blade Cutter•�3/8” Ball Head Cutter•�Separating Key•�Guide Hose• 200ml Rowonal Spray• Plumbers Tool Bag


47

Pipe and Drain Cleaning Equipment ListPrice$ ListPrice$ ProdProduct PartNo. Size excl.GST incl.GST Grp

WC-BLITZ�TOILET�AUGER

Proven cleaning device with robust spiral anduniversal bulb head cleaning cable. Extendable1/2”Ø, 1m cable. 78551� Each� � � B

POLYPROPYLENE�DRAIN�RODS

The simplest way to remove any obstructionin a drain. Each rod is 3ft long and has brassUNIVERSAL-type joints.

Set of 10 Drain Rods 130080� Set� � � Bcomplete with 4" plunger and worm screw

Individual 3' Drain Rod 130055� Each� � � B4" Rubber Plunger 130059� Each� � � B6" Rubber Plunger 130058� Each� � � B2" Double Worm Screw 130063� Each� � � B4" Drop Scraper 130065� Each� � � BClearing Wheel 130069� Each� � � B4" Drain Brush 130071� Each� � � BRotating Handle (optional, not in set) 130076� Each� � � B

STEEL�DRAIN�TEST�PLUGS

Used for sealing or blocking off drain pipes, priorto testing. Steel construction, with a protective plasticthread cap.

Drain Test Plug - 4”� 130091� 4”� � � BDrain Test Plug - 6” 130092� 6”� � � BDrain Test Plug - 9” 130094� 9”� � � B

POWER�CLEANER

Disposable, aerosol-style drain unblocker. Simple and easy to use, the Power Cleaner clears even the most stubborn blockages in seconds. Environmentally friendly. 70630 Each � � A


48

Pipe and Drain Inspection Cameras

• CMOS lens, LED illumination for brilliant image quality and fault- free diagnosis

OptionalmeteringcounterNew,scratch-resistant

sapphirelens

• Easily disconnected battery supply

• NEW!�6.8mm camera cable (PDM models only)

• Rugged frame for easy transportion and storage

• Video In / Video Out for DVD / CD / Video recording and playback

• Digital metering readout for precise location of camera head

ROCAM®�Mobile�/�PDMColour�drain�inspection�cameras�with�Duo-Power�and�image�capture

For hollow spaces and drains of: 50mm to 150mm ØCamera head: 33mm ØPush cable (Mobile): 4.5mm ØPush cable (Mobile PDM): 6.8mm ØPush cable length: 36mBattery life: 2-3hrs

Performance�features:• NEW! Ability to take pictures of the drain inspection (PDM models only)• Excellent manoeuvrability, due to flexible camera head• One-man, single-hand operation• Continuously adjustable LED brightness• Integrated storage compartment• Battery charge indicator• Duo-Power: mains operation 240V / 50–60kHz or 18V battery• PDM models complete with 1GB USB stick

• Camera head with sapphire glass lens and impact protection

• On-board battery charger with charge status indicator

• Monitor cover acts as glare shield

ReinforcedpushcableIntegratedshockabsorber

(colourmodelonly)Newunionnutwithedge

protection

• TFT colour monitor for excellent sharpness and contrast

• Built in sonde (640kHz) on model 69631

• Automatic power shut-off when visor is closed

7.6m

Digital recording options, for capturing both video and still images, are available for all ROCAM Mobile cameras. For more information contact our Sales department.

for Rocam Mobile, Mobile PDM & Rocam Plus*

• NEW! Ability to take pictures to integrated USB stick (PDM models only)


ROCAM�MOBILE

Rocam Mobile Colour Basic 69620 12.5kgs � � B

ROCAM�MOBILE�PDM

Rocam Mobile PDM Colour with metre counter 69626 13.0kgs � � BRocam Mobile PDM Colour with metre counter & locator 69631 14.1kgs � � B

*3 Year Warranty subject to terms and conditions, as per standard ROTHENBERGER 12 months guarantee. Battery covered by standard 12 month warranty only.Contact ROTHENBERGER Australia Pty Ltd for further information.

THICK7.5mmpushcable,60mor100m

Alwaysupright,self-levellingcamerahead

Dataenrolment(models69740&69840)Integratedshockabsorber

ROCAM®�PlusColour�drain�inspection�cameras�with�Duo-Power,�extended�cable,�and�self-levelling�camera�head

For hollow spaces and drains of: 50mm to 300mm Ø.Camera head: 40mm Ø, self-levellingPush cable: 7.5mm Ø.Push cable length: 60m or 100mBattery life: 2 - 3hrs

Performance�features:• Excellent manoeuvrability, due to flexible camera head• One-man, single-handed operation• Easy maintenance• Continuously adjustable brightness of LEDs• Integrated storage compartment• Battery charge indicator• Duo-Power: Mains operation 240V / 50–60kHz or 18V battery

• On-board battery charger with charge status indicator

• Rugged frame for easy transportion and storage

• Impact-resistant, splash proof ABS housing for use on building sites

• Easily disconnected battery supply

• Digital metering readout as standard, for precise location of camera head

• Monitor cover acts as glare shield

• Self levelling camera head - picture is always upright

InlineSonde33kHzoptionavailable(seepage50)

• Video In / Video Out: for DVD / CD / Video recording and playback

• Automatic power shut off when visor is closed


49

Pipe and Drain Inspection Cameras

• Comes with Colour Mini Module as standard. Can adapt down to 40mm pipes. 5 metres in length See page 51 for details

Digital recording options, for capturing both video and still images, are available for all ROCAM Mobile cameras. For more information contact our Sales department.

for Rocam Mobile, Mobile PDM & Rocam Plus*


Rocam Mobile Plus 60m cable 69725 20.0kgs � � DRocam Mobile Plus 60m cable & data enrolment 69740 21.0kgs � � D

Rocam Mobile Plus 100m cable 69825 25.0kgs � � DRocam Mobile Plus 100m cable & data enrolment 69840 26.0kgs � � D

*3 Year Warranty subject to terms and conditions, as per standard ROTHENBERGER 12 months guarantee. Battery covered by standard 12 month warranty only.Contact ROTHENBERGER Australia Pty Ltd for further information.



50

Inspection Camera Spares and Accessories

Other�Locator�/�Receiver�options�are�available.�For�more�details�please�contact�your�local�stockist

or�ROTHENBERGER�Australia.

CAMERA�HEADS

Black & White Standard Camera Head 69401�� DBlack & White Camera Head incl. Transmitter 69402� � � � D(For model 69430, 640kHz)

Colour Standard Camera Head 69505� (Supersedes PN 69501) � � DColour Camera Head incl. Transmitter 69506� (Supersedes PN 69502)� � � D(For model 69630 & 69631, 640kHz)

Rocam Plus Self-Levelling Camera Head 69701� � � � B

Rocam Mobile Camera Head service kit� 69528� Set� � � B(lens, cap and seals)Rocam Plus Camera Head lens kit� H82402� Set� � � B(lens, cap and seals)

LOCATOR�/�RECEIVER�SETS

Rocam B&W Location Upgrade Set �19261� � � � Bcomprising of Transmitter (inside camera head 640kHz), plus Locator/Receiver

Rocam Colour Location Upgrade Set �19271� � � Bcomprising of Transmitter (inside camera head 640kHz), plus Locator/Receiver

Rocam Locator only (640kHz & 512kHz) 069256� � � � BAutomatic and manual gain control (can onlybe used with camera heads with transmitter)

Rocam Plus In line Sonde (33kHz) 069850� � � � D

COMPUTER�RECORDING

USB Video adaptor 69560� � � BAnalogue-to-digital converter for recordingon laptop or PC. Comes complete withcapture / DVD creation software.Software compatible with Windows

BATTERIES�&�CHARGERS

Replacement battery - Rocam Mobile 69550� � � � B24V / 1.4Ah - NiCd

Replacement battery - Rocam Plus 69570� � � � B12V / 3.0Ah - NiMH

Rocam Mobile charging unit 69555� 24V� � � B

Rocam Plus charging unit 69575� 12V� � � B

ListPrice$ ListPrice$ ProdProduct PartNo. Size excl.GST incl.GST Grp ListPrice$ ListPrice$ ProdProduct PartNo. Size excl.GST incl.GST Grp


51

Inspection Camera Spares and Accessories

ROCAM�MOBILE�GUIDE�SKIDS

Star-type Guide Skids (each) H82306� 33mm x 100mm� � � B(Rocam Mobile only, not Plus models)For 33mmØ camera heads, and up to 100mmØpipe inspections.

Ball-type Guide Skids (each) 74628� 36mm x 70mm� � � B(Rocam Mobile only, not Plus models)For 36mmØ camera heads, and up to 70mmØpipe inspections.

ROCAM�PLUS�GUIDE�SKIDS

Wheeled Guide Skids (each) 69118 40mm x 150mm � � B(Rocam Plus models only)For 40mmØ camera heads, and up to 150mmØpipe inspections.

Wheeled Guide Skids (each) 69119 40mm x 200mm � � B(Rocam Plus models only)For 40mmØ camera heads, and up to 200mmØpipe inspections.

ROCAM�MINI�MODULE

Including 25mm Mini Camera on flexi-probewith 5m x 3.5mm coiled push rod.For 40mm Ø pipes with multiple bends.

Rocam Mini Module (Colour) 69160� Colour� � � B

ROCAM�MOBILE�CAMERA�CABLES

Replacement Cable (excl. spool) 69480 4.5mm x 36m � � DUpgrade Cable (incl. spool, non-metre counter) H82471 6.8mm x 36m � � DUpgrade Cable (incl. spool, with metre counter) H82472 6.8mm x 36m � � D

ROCAM�MOBILE�PDM�CAMERA�CABLE

Replacement Cable (excl. spool) 069481 6.8mm x 36m � � D

ROCAM�PLUS�CAMERA�CABLES

Rocam Plus Positioning Cable 60m� 69490� 7.5mm 60m� � � DRocam Plus Positioning Cable 100m� 69491 7.5mm x 100m� � � D

CAMERA�PUSH�ROD

For additional strength and reinforcement 74619� 30m� � � BMust be used in conjunction with a ball skid,(p/n 74628).Rocam Mobile cameras only, not Plus models).

Cable Head ListPrice$ ListPrice$ ProdProduct PartNo. length Dia. excl.GST incl.GST Grp

Set: Roscope PIPE 20 / 3 69384� 3m� 20mm � � C

Cable & Camera Head PIPE 20 / 3 69385� 3m� 20mm� � � C


52

USB Akku

SD

10 mm

1,5 m

12 mm 25 mm 5,5 mm

3 m 22 m 1 m

Ø Ø Ø Ø

The�following�items�all�come�standard�with�each�set:

•�Take�“still”�pictures�or�� record� Record, view and save pictures and video

Hand-Held Inspection Cameras

•�USB�Interface Easy data transfer to computers

ROSCOPE�MultiviewRobust,�compact�and�versatile�suitable�for�many�applications.�

Display: 3.5”TFTcolourdisplay,320x240pixelsBattery: RechargableLi-PolymerPictureformat: MPEGCircuitpoints: MiniUSB/AVOut

•�Date�&�Time Fading in / out

•�3.5”�TFT�Colour�Monitor Clear image, oil & scratch resistant monitor, adapted resolution

•�Menu�&�Tool�Control Multifunction buttons • e.g. Direct inspection & video playback • e.g. Direct still picture replay

• Inspect

• Photograph

• Shoot

• record/Save

•�Continuous�brightness� regulation�(LED) Optimal picture illumination

•�SD�Cardslot�with� 2GB�memory�card�included Built in expandable memory capacity

•�AV�Out�/�Mini�USB�interface Can be connected to an external display

ROSCOPE�Set�PIPE�20�/�3Flexible 3m cable is ideal for inspecting pipes, tubes and cavities.

4�different�models�available.All�4�cable�and�camera�head�options�are�interchangeable�and�can�be�bought�individually.

P/n:�69360 + P/n:�69385

Set (69384) includes: Basic Tool (69360) + PIPE 20 / 3 (69385)

+Carry�Case

+SD-Card�(2GB)

+USB�Cable

+Video�Cables Charger

USB Akku

SD

10 mm

1,5 m

12 mm 25 mm 5,5 mm

3 m 22 m 1 m

Ø Ø Ø ØUSB Akku

SD

10 mm

1,5 m

12 mm 25 mm 5,5 mm

3 m 22 m 1 m

Ø Ø Ø Ø20 mm

BatteryUSB



53

Hand-Held Inspection Cameras

P/n:�69364 P/n:�69379

ROSCOPE�Set�TEC�10�/�1.5Robust gooseneck cable, with high quality lens for inspecting difficult to reach places. The 1.5m cable length is long enough to inspect behind suspended ceilings without the use of a ladder.

ROSCOPE�Set�PIPE�25�/�22Flexible 22m cable for inspecting tubes, pipes and cavities. 25mm dia. camera ismounted on the cable holder, minimising space required. NEW! Now with stronger 5.5mm cable and replaceable camera head.

P/n:�69360 P/n:�69372Set (69371) includes: Basic Tool (69360) + PIPE 25 / 22 (69372) + Cable Holder Case

Set (69363) includes: Basic Tool (69360) + TEC 10 / 1.5 (69364) + Accessory Set: Hook, Mirror & Magnet (69379)

P/n:�69360

+ +

++

USB Akku

SD

10 mm

1,5 m

12 mm 25 mm 5,5 mm

3 m 22 m 1 m

Ø Ø Ø Ø

USB Akku

SD

10 mm

1,5 m

12 mm 25 mm 5,5 mm

3 m 22 m 1 m

Ø Ø Ø Ø

Set: Roscope TEC 10 / 1.5 69363� 1.5m� 10mm � � C

Cable / Camera Head TEC 10 / 1.5 69364� 1.5m� 10mm� � � CAccessory Set (Hook, Mirror, Magnet) 69379� � � � � C

USB Akku

SD

10 mm

1,5 m

12 mm 25 mm 5,5 mm

3 m 22 m 1 m

Ø Ø Ø Ø

USB Akku

SD

10 mm

1,5 m

12 mm 25 mm 5,5 mm

3 m 22 m 1 m

Ø Ø Ø Ø

Mirror

Magnet

P/n:�69376 P/n:�69380

ROSCOPE�Set�MICRO�5.5�/�1Roscope Micro includes flexible cable and 5.5mm camera head, ideal for inspectingand recording in the smallest diameter pipes & cavities.

Set (69375) includes: Basic Tool (69360) + MICRO 5.5 / 1 (69376) + Accessory Set: Mirror & Magnet (69380)

P/n:�69360

+ +

USB Akku

SD

10 mm

1,5 m

12 mm 25 mm 5,5 mm

3 m 22 m 1 m

Ø Ø Ø Ø

USB Akku

SD

10 mm

1,5 m

12 mm 25 mm 5,5 mm

3 m 22 m 1 m

Ø Ø Ø Ø

5.5m

m


Set: Roscope MICRO 5.5 / 1 69375� 1m� 5.5mm � � C

Cable / Camera Head MICRO 5.5 / 1 69376� 1m� 5.5mm� � � CAccessory Set (Mirror & Magnet) 69380� � � � � C


Set: Roscope PIPE 25 / 22 in carry case 69371� 22m� 25mm � � C

Cable & Camera Head PIPE 25 / 22 69372� 22m� 25mm� � � C

Replacement Cable 22m x 5.5mm 069372P� 22m� � � � CReplacement Camera Head 25mmØ 069387� � 25mm� � � C

Mirror

Magnet

Hook

Diamond Drilling Equipment ListPrice$ ListPrice$ ProdProduct PartNo. Size excl.GST incl.GST Grp


54

Drill�Requirements�(for�both�sets)• Minimum 850watt • Slipping Clutch• No Hammer Drilling • Variable Speed ControlForidealresultsdrillshouldbecapableof3000rpm

DRY�DIAMOND�CORE�DRILL�SETS

Ideal for intensive use across a wide range ofbuilding materials such as facing bricks, concreteblocks, building blocks and other softer naturalstones. Not suitable for hard materials such asreinforced concrete & marble.

Dry Diamond Core Drill Set - Plumbing 89020�� Set� � � BSet includes: 5 x core drills (42, 52, 65, 117, 127mm), 3-jaw chuck adaptor, 3-jaw 250mmextension, SDS chuck adaptor, SDS 250mm extension,taper masonry drill, taper guide rod, drift key, in analuminium tool case.

Dry Diamond Core Drill Set - Refrigeration 89023�� Set� � � BSet includes: 4 x core drills (42, 52, 65, 78mm),3-jaw chuck adaptor, 3-jaw 250mm extension,SDS chuck adaptor, SDS 250mm extension,taper masonry drill, taper guide rod, drift key, in analuminium tool case.

DRY�DIAMOND�CORE�DRILL�ACCESSORIES

28mm Core 89001� 28mm x 300mm� � � B38mm Core 89003� 38mm x 150mm� � � B42mm Core 89002� 42mm x 150mm� � � B52mm Core 89004� 52mm x 150mm� � � B65mm Core 89005� 65mm x 150mm� � � B�78mm Core 89006� 78mm x 150mm� � � B��107mm Core 89007� 107mm x 150mm� � � B��117mm Core 89008� 117mm x 150mm� � � B��127mm Core 89009� 127mm x 150mm� � � B��152mm Core 89010� 152mm x 150mm� � � B��

Standard 3 Jaw Chuck adaptor 89012� � � � B��SDS Chuck Adaptor 89014� For cores 38-152mm� � � B��

Centering Rod 89015� 13mm� � � B��Extension Rod 89017� 250mm� � �� B��Extension Rod SDS 89019� 250mm� � �� B

A-Taper Masonry Pilot Drill 89021� 10mm � � B13mm Masonry Drill SDS 89018� 13mm � � B

DIAMOND�TILE�DRILLS

Ideal for drilling clean accurate holes in mostcommon tiles, such as Porcelain (Grade 5),Granite, Glass, Marble and Slate. Drills have auniquely welded diamond tip giving them highstrength and longevity.

Diamond Tile Drill Set 89090� Set� � � BSet includes 6, 7, 10mm drill bits & water reservoir

5mm Drill 89080� 5mm x 30mm � � B6mm Drill 89081� 6mm x 30mm� � � B7mm Drill 89082� 7mm x 30mm� � � B8mm Drill 89083� 8mm x 30mm� � � B10mm Drill 89084� 10mm x 30mm� � � B12mm Drill 89085� 12mm x 30mm� � � B20mm Drill 89086� 20mm x 30mm� � � B�25mm Drill 89087� 25mm x 30mm� � � B��30mm Drill 89088� 30mm x 30mm� � � B��35mm Drill 89089� 35mm x 30mm� � � B��

Diamond Cutting Equipment


55

Diamond�Cutting�WheelsThe�perfect�diamond�cutting�wheel�for�all�types�of�use�in�various�industries.

ideal for use in industries such as construction, roofing, electrical etc.Can be used for both wet and dry cutting.

RED Professional cutting wheels for:• concrete• brickwork• granite• artificial stone• semi-hard stone• ceramic


RED�PROFESSIONALRED Professional 100mm FF11100� 100mm � � ARED Professional 115mm FF11115� 115mm � � ARED Professional 230mm FF11230� 230mm � � A

•�Cooling�Slots Minimises temperature of the wheel and prevents wear of the diamond segments.

•�Technologically��Strengthened�Diamond��Segments Provides long working life of the cutting wheel.

•�10mm�Diamond��Segments Excellent cutting properties, long service life.

•�Strengthened�Steel�Core Minimises vibrations, provides better cutting force.


56

NOTES


57

NOTES


58

NOTES


59

Terms and Conditions

TERMS�AND�CONDITIONS�OF�SALE

In these Conditions “the Seller” means ROTHENBERGER Australia Pty Ltd “the Buyer” means the person, firm or company purchasing the goods; “the Goods” means the goods or materials which shall be the subject of the Contract between the Seller and the Buyer. “the price” means the price specified in the Seller’s Current Price List or otherwise communicated to the Buyer and agreed.

Acceptance�of�OrderAll orders accepted by the seller are subject to these Conditions of Sale unless otherwise varied by agreement in writing. Contracts for delivery by instalments shall be deemed to be indivisible.

The�Price1. Orders are accepted at the Price current at the date of despatch of the goods.

The seller reserves the right, at any time before delivery, to increase the Price or withdraw from the Contract in which event the Buyer may, within seven days of receipt of notice to that effect, by notice in writing to the Seller cancel the Order so far as the undelivered balance of the goods is concerned.

2. Unless otherwise stated, the Price of the Goods shall include standard packaging and delivery to any one address within the metropolitan area Adelaide, Brisbane, Melbourne, Perth and Sydney specified in writing by the Buyer to and agreed by the Seller prior to delivery except that in the case of Orders below a $150.00 in net value accepted by the Seller and the Buyer will pay a A$15.00 minimum order charge plus whichever is the greater of A$7.50 or the relevant invoicing/carriage or postal charges. The Seller reserves the right to reject any order which is uneconomical to despatch.

3. Prices in the Price Column of the Seller’s Price List are per item unless otherwise shown.

4. Containers and/or packages are not returnable unless so requested by the Seller.5. Prices charged are inclusive of GST (Goods & Service Tax). GST is charged at

10% unless otherwise shown. GST is subject to amendments by the authorities concerned.

Payment1. Unless otherwise stated on the Seller’s invoice or otherwise agreed in writing,

payment for the Goods shall be made not later than 30 days from the statement date but so that the Seller may at any time on or after acceptance by notice in writing to the Buyer vary the terms of payment by demanding immediate payment or (at the Seller’s option) adequate security for sums which will be due hereunder.

2. Time of payment shall be of the essence and failure by the Buyer to pay the price or any instalment thereof in due time shall entitle the Seller to treat such failure as a repudiation of the whole contract by the Buyer and to require the Buyer to make immediate payment of all monies due or to become due to recover from the Buyer damages for such breach of contract and/or (at the Seller’s option) to charge interest at three (3) per centum per month or three per centum above the Base rate of ANZ Banking Group, whichever shall be the greater, from the due date until payment.

3. All accounts are payable net.

DeliveryUnless otherwise agreed in writing between the Seller and the Buyer the following provisions shall apply:1. When the Goods are put in the post or handed over to the carrier for delivery to

the address specified on the Seller’s invoice, delivery of the goods shall have been made.

2. Any delivery date specified in the order or the Seller’s acceptance are estimates only, The Seller shall have no liability for failure to meet such dates. In any event the Seller shall not be liable for consequential or special damages arising directly or indirectly out of delay in delivery. The Buyer shall not be entitled to refuse to accept Goods because of late delivery.

3. From delivery the risk of any loss or damage to or deterioration of the Goods shall be borne by the Buyer.

4. The Seller is free of any liability to inform the Buyer of consignment by sea transit.

Property1. Property in Goods meaning legal ownership is retained by the Seller until all sums

due by the Buyer to the Seller on any account are paid.2. Property in Goods incorporated or packaged with other products is retained by The

Seller in so far as such Goods are identifiable.3. Possessions by the Buyer of Goods in the legal ownership of the Seller shall be on a

fiduciary basis only.4. The Goods shall be stored separately by the Buyer so as to be identifiable as the

property of the Seller. That the Goods are in store shall be prima facie evidence of identity with those of like brand and description supplied on the latest applicable invoice.

5. Proceeds of sale by the Buyer shall be traceable for the beneficial ownership of the Seller.

6. The Buyer shall keep goods in the legal ownership of the Seller in clean and merchantable condition and allow no lien, encumbrance or representation so as to prejudice the legal ownership of the Seller.

7. The Buyer will permit, when in the discretion of the Seller it is desirable, the servants and agents of the Seller to enter premises, stock take, resume possession of and remove Goods in the legal ownership of the Seller.

8. The Seller may inform any banker reasonably believed to be seeking or to hold any charge over assets of the Buyer of the terms of this condition.

LienThe Seller shall in respect of all unpaid debts from the Buyer have a general lien on all goods of the Buyer in the possession of the Seller and after the expiry of fourteen (14) days written notice to the Buyer be entitled to dispose of such Goods as it deems fit and apply the proceeds towards such debts.Inspection�on�Receipt�and�Notices�of�Claim1. The Buyer shall inspect the Goods immediately upon receipt and shall within three

(3) days of such receipt ( time being of the essence) give notice in writing to the

Seller and the Carrier of all claims on account of damage to or loss of goods in transit.

2. Claims for non-delivery must be submitted in writing to The Seller within ten (10) days after notification of dispatch.

3. Quality claims must be made in writing immediately after The Buyer learns of the defect. Any Goods returned as faulty will (subject as hereafter mentioned) be replaced where faults in workmanship or material are proved.

4. Any claim not made in writing and received by the Seller within the above time limits shall be deemed waived.

5. If the Seller fails to make delivery or makes defective delivery of any one instalment such shall not vitiate the contract as regards other instalments.

6. Any right of the Buyer to set off the value of any shortage, defective goods or Goods not otherwise conforming to contract shall be restricted to the specific invoice for the goods in question and shall not apply to previous or future accounts.

Warranty�and�Limitation�of�Liability1. The Seller warrants that the Goods are produced within the accepted tolerance

level of its standard specifications and are merchantable quality. Except as preluded by statue all other conditions or warranties whether expressed or implied by statue common, law or otherwise are excluded.

2. The Sellers liability for any and all direct or indirect loss or damage to the Buyer for defects in the Goods or any other cause shall be limited to the purchase price of the Goods to which such loss or damage is attributed.

3. The Seller shall be under no liability in contract or in tort for any loss or damage or personal injury arising directly or indirectly out of the supply or use of the goods or containers.

Force�Majeure1. Deliveries may be partially or totally suspended by either party during any period in

which it is prevented from manufacturing, delivering or taking delivery of the Goods through any circumstances outsides its control.

2. If because of such circumstances, the Seller is unable to supply total requirements the Seller may allocate its available supply (after its own requirements) among all of its customers as the Seller thinks fit.

3. Delivery so suspended shall be cancelled without liability, but the contract between the parties shall remain unaffected.

IndemnityThe Buyer indemnifies the Seller in respect of all damage or injury occurring to any person, firm, company or property and against all actions, suits claims and demands, charges or expenses in connection therewith for which the Seller may become liable in respect of the Goods sold under the contract in the event that the damage of injury shall have been occasioned otherwise than by the negligence of the Seller.

DefaultThe Seller reserves the right (without prejudice to its other rights and remedies) either to terminate the contract between parties or to suspend further deliveries under it or require payment in advance if the Buyer fails to pay for any one delivery when the same becomes due or to the Buyers financial responsibility becomes unsatisfactory to the Seller or if the Buyer, being a company, goes into liquidation or voluntary administration or has a receiver/or manager appointed or not being a company has a receiving order made against him or the Buyer enters into arrangement or composition with creditors.

DutyAll import duties, taxes and other imposts will be for the Buyer’s account.

Patents�and�Trade�MarksNo representation, warranty or indemnity is given by the Seller that the Goods do not infringe any letters patent, trade marks, registered designs or other industrial rights or intellectual property.

Export�of�goodsThe Buyer shall not export any Goods outside Australia without first notifying the Seller of the identity and address of the customer and of the price at which the Goods are sold to the customer.

Return�of�GoodsReturn of goods will only be accepted if agreed in writing by the Seller in which event the Seller shall be entitled to recover from the Buyer a handling charge being not less than A$15.00 or 15% of the selling price of the Goods ( whichever is the greater). All Goods must be new and of current design and have to be in resaleable condition as approved by The Seller.

AssignabilityThe contract of which these conditions form part is personal to the Buyer who shall not assign benefit thereof without the Seller’s written consent.


60


ROTHENBERGER�Worldwide

ROTHENBERGER�Australia�PTY�LTD�Unit�12,�5�Hudson�Avenue,�Castle�Hill�NSW�2154�Telephone:�(02)�9899�7577�Facsimile:�(02)�9899�7677�Email:�[email protected]

www.rothenberger.com.au

ROTHENBERGERNederlandbvPostbus45•NL-5120AARijenTel.+31(0)161/293579•Fax+31(0)161/[email protected]•www.rothenberger.nl

ROTHENBERGERPolskaSp.z.o.o.ul.Cyklamenów1•PL-04-798WarszawaTel.+4822/6127701•Fax+4822/[email protected]•www.rothenberger.pl

SUPER-EGOTOOLSFERRAMENTAS,S.A.Apartado62-2894-909Alcochete-PORTUGALTel.+351/912218080•Fax+351/[email protected]

ROTHENBERGERTOOLS(FE)PTELTD147ThyrwhittRoadSingapore207561Tel.+65/6296-2031•Fax+65/6296-4031www.rothenberger.com.sg

ROTHENBERGER-TOOLSSA(PTY)Ltd.P.O.Box4360•Edenvale1610165VanderbijlStreet,MeadowdaleGermistonGauteng(Johannesburg),SouthAfricaTel.+2711/3729633•Fax+2711/[email protected]

ROTHENBERGERS.A.Ctra.Durango-Elorrio,Km2•E-48220Abadiano(Vizcaya)(P.O.Box)117•E-48200Durango(Vizcaya)Tel.+3494/6210100•Fax+3494/[email protected]•www.rothenberger.es

ROTHENBERGERSchweizAGHerostr.9•CH-8048ZürichTel.+41/14010800•Fax+41/[email protected]

ROTHENBERGERTes.AletveMak.San.Tic.Ltd.StiPoyrazSok.No:20/3-DetayIsMerkeziTR-34722Kadiköy-IstanbulTel.+90/2164492485pbx•Fax+90/[email protected]

ROTHENBERGERMiddleEastFZCOPOBox261190•JebelAliFreeZoneDubai,UnitedArabEmiratesTel.+971/48839777•Fax+971/[email protected]

ROTHENBERGERUKLimited2,KingsthornePark,HensonWayKettering•GB-NorthantsNN168PXTel.+441536/310300•Fax+441536/[email protected]

ROTHENBERGERUSALLC4455BoeingDrive;USA-Rockford,IL61109Tel.+1/8153977070•Fax+1/8153978289www.rothenberger-usa.com

ROTHENBERGERUSAInc..WesternRegionalOffice•USA-955MontereyPassRoadMontereyPark,CA91754Tel.+1323/2681381•Fax+1323/260497

ROTHENBERGERAgency

OLMAX2-dVerkhnyMikhailovskypr-d,9build.2115419MoscowTel.+7/0957925944•Fax+7/[email protected]•www.olmax.ru

S.C.ROWALTS.R.L.Str.1Mai4RO-075100Otopeni-BucharestTel.+4021/3503744•+4021/3503745Fax+4021/[email protected]

Netherlands

Poland

Portugal

Singapore

SouthAfrica

Spain

Switzerland

Turkey

UAE

UK

USA

Russia

Romania

ROTHENBERGERAGIndustriestrasse7•D-65779Kelkheim/GermanyTel.+49(0)6195/800-1•Fax+49(0)6195/[email protected]•www.rothenberger.com

ROTHENBERGERProduktionGmbHLilienthalstrasse71-87•D-37235Hessisch-LichtenauTel.+49(0)5602/9394-0•Fax+49(0)5602/939436

ROTHENBERGERWerkzeugeGmbHIndustriestrasse7•D-65779Kelkheim/GermanyTel.+49(0)6195/800-1•Fax+49(0)6195/[email protected]

ROTHENBERGERAustraliaPty.Ltd.Unit12•5HudsonAvenue•CastleHill•N.S.W.2154Tel.+612/98997577•Fax+612/[email protected]

ROTHENBERGERWerkzeuge-undMaschinenHandelsgesellschaftm.b.H.Gewerbeparkstrasse9•A-5081AnifnearSalzburgTel.+43(0)6246/72091-45•Fax+43(0)6246/[email protected]•www.rothenberger.at

ROTHENBERGERBeneluxbvbaAntwerpsesteenweg59•B-2630AartselaarTel.+32(0)3/8772277•Fax+32(0)3/[email protected]

ROTHENBERGERdoBrasilLtda.RuamarinhodeCarvalho,No.72-VilaMarina09921-005Diadema-SaoPaulo-BrazilTel.+5511/404447-48•Fax+5511/[email protected]•www.rothenberger.com.br

ROTHENBERGERBulgariaGmbHBoul.Sitniakovo79•BG-1111SofiaTel.+359/29461459•Fax+359/[email protected]•www.rothenberger.bg

SHANGHAIROTHENBERGERI/ECO.,LTDNo.199JiuganRoad,SijingTownSongjiangDistrict,Shanghai,(201601)ChinaTel.+86/2157617688•0086/2157617959Fax+86/2157626062•[email protected]

ROTHENBERGERCZ,nárˇadíastroje,spol.s.r.o.Vinohradská100(1710)•CZ-13000Praha3Tel.+4202/71730183•Fax+4202/[email protected]•www.rothenberger.cz

ROTHENBERGERScandinaviaA/SFåborgvej8•DK-9220AalborgØstTel.+4598/157566•Fax+4598/[email protected]

ROTHENBERGERFranceS.A.24,ruedesDrapiers,BP45033•F-57071MetzCedex3Tel.+333/87749292•Fax+333/[email protected]

ROTHENBERGERHellasS.A.249SyngrouAvenue•GR-17122NeaSmyrni,AthensTel.+30210/9407302•Fax+30210/[email protected]

ROTHENBERGERHungaryKft.Gubacsiút26•H-1097BudapestTel.+361/347-5040•Fax+361/[email protected]

ROTHENBERGERIndiaPrivateLimitedB-1/D-5,GroundFloorMohanCooperativeIndustrialEstateMathuraRoad,NewDelhi110044Tel.+9111/51699040,51699050•Fax+9111/[email protected]

ROTHENBERGERIrelandLtd.BayN.119,ShannonIndustrialEstateIRL-Shannon,Co.ClareTel.+35361/472188•Fax+35361/[email protected]

ROTHENBERGERItalianas.r.l.ViaG.ReissRomoli17•I-20019SettimoMilaneseTel.+3902/3350601•Fax+3902/[email protected]•www.rothenberger.it

ROTHENBERGERS.A.SucursalMéxicoBosquesdeDuraznosNo.69-1006BosquesdelasLomas•MéxicoD.F.11700Tel.+52/558589-3948ext21/22Fax+52/558589-5770ext11

GermanyHeadquarters

Australia&NewZealand

Austria

Belgium

Brazil

Bulgaria

China

CzechRepublic

Denmark

France

Greece

Hungary

India

Ireland

Italy

Mexico

Reece | Plumbing | Tools and Hardware | Rothenberger ... · PDF filetel: toll free 1800 186...

Documents

Transcript of Reece | Plumbing | Tools and Hardware | Rothenberger ... · PDF filetel: toll free 1800 186...