Redesign in boom plate mast

Report 13-23

1 Ing. Mariano Garijo Ortega www.theriggingpoint.com

Checking of redesign in boom plate mast. Simulation prior to perform the work of modification and manufacturing

This modification was made because it did not allow mobility and correct tensioning of the sail when the superyacht was navigating.

To carry out the project, there was that taking all the measurements to design and perform the work, because I did not have any drawing or file in 3d which helped to carry out it. Here are displayed the design prior and after of being performed.

Prior

Redesign in boom plate mast

Report 13-23

2 Ing. Mariano Garijo Ortega www.theriggingpoint.com

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Redesign in boom plate mast

Report 13-23

3 Ing. Mariano Garijo Ortega www.theriggingpoint.com

Solution

Redesign in boom plate mast

Report 13-23

4 Ing. Mariano Garijo Ortega www.theriggingpoint.com

Horizontal boom

The plate had to be displaced 133mm.

Redesign in boom plate mast

Report 13-23

5 Ing. Mariano Garijo Ortega www.theriggingpoint.com

Old Plate

New plate

Redesign in boom plate mast

Report 13-23

6 Ing. Mariano Garijo Ortega www.theriggingpoint.com