Redco™ Polyurethane Sprockets minimize damage & wear to chain; saving maintenance costs, increasing production & saving replacement costs.

Redco™ Polyurethane Sprockets are custom molded with Redco™ 750 Polyurethane, producing tough, durable sprockets with higher load capabilities than UHMW/PE and 1/4 the weight of steel.

Custom designs for Roller Chain, Mill Chain, Drag Chain, “A” Plates, Split Hubs and many more..

REDCO™ POLYURETHANE

INNOVATIVE SOLUTIONS IN PLASTIC SINCE 1971

INCREASE PRODUCTIVITYREDUCE MAINTENANCE

WILL NOT CORRODE, ROT or RUST

LIGHTWEIGHTQUICK TO INSTALL

REDUCE WEAR

SPR CKETS

PROVEN SINCE 1978

CONTACT US TODAYCDN 1 800 667 0999

US 1 866 733 2684www.redwoodplastics.com

• Lightweight (1/4 the weight of Steel)• Significant Noise Reduction• Corrosion, rust, chemical resistant • Reduces Chain Wear• Very Cost Effective and Competitive

• Easy Installation with Split Components• Tough, Durable and Higher Load Capabilities than UHMW/PE• No Bushings Required (for idlers) comes with Grease Fittings

COMMON MILL CHAIN SIZES: • H-130 Cast, Camel Black & Roof Top (H-78 Series)• 81x, LXS-882, C-188• H78, HD78, MDH-578, SS 578, 1578• MS-88, MO-88, W-78• C & H -124, C & H -82, C & H -132

Please Refer to our Web site for

Physical Properties & Specifications.

CUSTOM DESIGN AND FABRICATIONRedwood Plastics has designed and fabricated a variety of solutions to shock, abrasion, noise, wear and friction to many industries, resulting in increased production, decreased maintenance costs and decreased down time, adding to your bottom line.

www.redwoodplastics.com

Contact Your Local Representative Today

A Member of

We cannot anticipate all conditions under which this information and our products or the products of other manufacturers in combination with our products may be used. We accept no responsibility for results obtained by the application of this or the safety and suitability of our products, whether alone or in combination with other products. Users are advised to make their own test to determine the safety and suit ability of each such product or product combination for their own purposes. Unless otherwise agreed in writing, we sell the products without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the and use of our products, whether used alone or in combination with other products. For most recent technical information, phone 360 225 1491 in USA or 604 607 6000 in Canada.

Printed in Canada

REDCO™ POLYURETHANE

SPR CKETS

Custom Sizes Available