RECYCLING BANK OF GWINNETT...Caterpillar Model P6000-D Diesel Powered Solid Pneumatic Tire Lift...

COMPLETE PAPER, ALUMINUM AND PLASTIC RECYCLING FACILITY INCLUDING SORTING LINES, LARGE BALERS, ROLL-OFFS, HOPPERS, SKID STEERS, LIFT TRUCKS AND

SHOP SUPPORT EQUIPMENT

COMPLETE PAPER, ALUMINUM AND PLASTIC RECYCLING FACILITY INCLUDING SORTING LINES, LARGE BALERS, ROLL-OFFS, HOPPERS, SKID STEERS, LIFT TRUCKS AND

SHOP SUPPORT EQUIPMENTSee Instructions on Page 3

To Become a Qualified Bidder on the Internet

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

SALE DATE: WEDNESDAY, AUGUST 31ST, STARTING AT 10:00 AMSALE DATE: WEDNESDAY, AUGUST 31ST, STARTING AT 10:00 AMINSPECTION: TUESDAY, AUGUST 30TH, FROM 10:00 AM TO 4:00 PM

RECYCLING BANK OF GWINNETTRECYCLING BANK OF GWINNETT4300 Satellite Boulevard – Duluth, Georgia 3009620 Miles Northeast of Downtown Atlanta, GA off I-85

Facility Closed

(6) Caterpillar and Bobcat Skid Steers To 2008 (12) Wastequip 30 Yard Closed Top Roll-Off ContainersUsed for Recycling Operations

IPS Model AT-865-HS50 Open End Horizontal Hydraulic Baler w/ Auto-Tie

(4) Caterpillar Diesel Lift Trucks Up To 10,000 LB

CP Industries Model 3901-6981 Three-Deck Paper Screen

NEW2009

NEW2008

NEW2013

NEW AS2008 NEW AS

2008

1647162V CIA Gwinnett Clean and Beautiful-4 update 8/17/16 10:43 AM Page 1

WEDNESDAY, AUGUST 31ST – 10:00 AMWEDNESDAY, AUGUST 31ST – 10:00 AM

SINGLE STREAMRECYCLING LINECP Industries Model 3901-6981Three-Deck Paper Screen; S/N2052 (New 2008) SEE PHOTO

• 46” x 42’ Rubber Belt CleatedIncline Conveyor; 2” High Cleats,12” Centers

• 46” x 32’ Hytrol Flat Rubber BeltPre-Sort Conveyor w/ Chutes &Fabricated Platform

• 48” x 22’ Hytrol Flat Rubber BeltPost-Sort Conveyor SEE PHOTO

• 48” x 42’ Hytrol Cleated BeltIncline Outfeed Conveyor; 2” x 12”Cleats

• 46” x 37’ Hytrol Flat Rubber BeltCrossfeed Conveyor

• 24” x 36’ Hytrol Flat Rubber BeltPaper Recovery Conveyor

• 24” x 26’ Hytrol Flat Rubber BeltPaper Drop-Off Incline Conveyor

COMINGLERECYCLING LINE36” X 8’ CP Industries Model3900-8008 Eddy CurrentSorting System; S/N S019108, 36”

x 8’ Conveyor, Magnet Specs: ModelREEC-14X30, 30” Belt Width, 2,500RPM Max (New 2011) SEE PHOTO

➢ 36” x 6’ CP Industries Cross BeltSorting Magnet SEE PHOTO

➢ 36” x 50’ Special Cleated RubberBelt Incline Infeed Conveyor; 3” x12” Cleats

➢ 36” x 102’ Hytrol Horizontal FlatRubber Belt Sorting Conveyor w/Trash Chutes & Platform

SEE PHOTO

➢ 19” x 50’ Flat Rubber Belt UBCRecovery Conveyor

➢ 24” x 60’ Hytrol Flat Rubber BeltTrash Line Conveyor

PAPER / ALUMINUM /PLASTIC BALERIPS Model ATS-1080HS OpenEnd Horizontal Hydraulic Balerw/ Auto-Tie; S/N 10992, Aluminum,Plastics & Paper Capable, 10” Dia.Main Cylinder, 30” x 45” x 60”Approx. Bale Size, 3,000 PSI Pressure,66” x 72” Hopper Opening, 100 HPMotor, (1) Pump Needs Rebuilt, Auto-Tie System, Allen Bradley PLC, End

Squeeze Cylinder, Bale Weights: 1,500Lb. OCC, 1,600 Lb. News, 900 Lb.UBC, 1,000 Lb. PET, 1,900 Lb.Aluminum (New 2006)

SEE PHOTO

PAPER / PLASTICBALERSIPS Model AT-865-HS50 OpenEnd Horizontal Hydraulic Balerw/ Auto-Tie; S/N 7538, 8” MainCylinder, 3,000 PSI, 150,000 Lb.Force, 50 HP Main Motor, 66” x 60”Hopper Opening, 54” x 60” Charg BoxOpening, 30” x 45” x 60” Approx. BaleSize, Bale Weights: 1,375 Lb. OCC,1,400 Lb. News, 600 Lb. UBC, 900Lb. PET, PB Control (New 2009)

SEE PHOTO

➢ 60” x 48’ Hytrol RubberBelt Incline Conveyor; 2”Cleats, 24” Centers, End Drive

IPS Model 738CD-HS20Horizontal Hydraulic Baler; S/N4727, PB Control, 3,000 PSI, 7” Bore,30” x 43” x 60” Approx. Bale Size, BaleWeights: 1,350 Lb. OCC, 1,400 Lb.News, 1,000 Lb. PET, 600 Lb.Aluminum Cans (New 2008)

SEE PHOTO

➢ 48” x 30’ Hytrol RubberBelt Incline Conveyor; 2”Cleats, 18” Centers

ROLL-OFFS ANDHOPPERS(12) Wastequip 30 Yard ClosedTop Roll-Off Containers Usedfor Recycling Operations; 7’ WideX 27’ Long X 5’ Deep, Each With RearHinged Door and 3-Sliding AccessDoors on Each Side (New 2013)

SEE PHOTO

(5) Jesco 10-Yard Self DumpingHoppers, 132” Wide (2000’s)

SEE PHOTO

(14) Jesco 5-Yard Self DumpingHoppers, 80” Wide (2000’s)(30) Jesco 2-1/2-Yard PortableSelf Dumping Hoppers (2008)(15) 2-1/2 and 5 Yard SelfDumping Hoppers in Need ofSome Repair

TRACTORNew Holland Model T4040 4-Wheel Drive Tractor; S/NZ8JA02806, Model 445TA/MNG 4-Cylinder Diesel Engine, 3-Point Hitch,Live PTO, 8-Speed Manual

(30) Jesco 2-1/2-Yard Portable Self Dumping Hoppers20,000 LB X 10’ Wide X 60’ Long In-Ground Drive On TruckScale

(5) Jesco 10-Yard Self Dumping Hoppers, 132” Wide(2000’s)

46” x 42’ Rubber Belt Cleated InclineConveyor

CP Industries Model 3901-6981 Three-Deck Paper Screen

36” x 102’ Hytrol Horizontal FlatRubber Belt Sorting Conveyor w/Trash Chutes & Platform

36” x 6’ CP Industries Cross BeltSorting Magnet

15% ONSITE BUYERS PREMIUM18% ONLINE BUYERS PREMIUM

36” X 8’ CP Industries Model 3900-8008 Eddy Current Sorting System Single Stream Recycling Line

NEW2000’s

NEW2000’s

NEW2008

NEW2008

NEW2008


RECYCLING BANK OF GWINNETT RECYCLING BANK OF GWINNETT

Transmission with Column Shifter, RollBar Attachment with Model 810TL FrontLoader Attachment, 84” Wide Bucket

SEE PHOTO

➢ 96” Wide Model 260HVBucket **To Sell Separate**

SKID STEER LOADERS2006 Caterpillar Model 236B SkidSteer Loader; S/NCAT0236BJHEN04133, with Cat Model157-7225 Grapple Bucket, Solid Tires,3,346 Hours (2006) SEE PHOTO

2008 Bobcat Model S250 SkidSteer Loader; S/N A5GM20315, withBobcat Model 66-INDI-BKT GrappleBucket, Solid Tire, 3,650 Hours (2008)

SEE PHOTO

2009 Bobcat Model S250 SkidSteer Loader; S/N A5GM35531, withBobcat Grapple Bucket, Solid Tire, HoursN/A **Not in Service**

(2) 2008 Bobcat Model S250 SkidSteer Loader; S/N A5GM20002 andA5GM20887, Solid Tires, NoAttachments, Hours N/A **Not inService**

Bobcat Model 863 Skid SteerLoader; S/N 51440216, with 67” WideBucket, Solid Tires, Hours N/A **Not inService**

(4) Extra Bobcat Model GRPL-74Grapple Buckets SEE PHOTO

LIFT TRUCKS10,000 Lb. Caterpillar ModelDP45K-D Diesel Powered solidPneumatic Tire Lift Truck; S/NAT19CR0410, 3-Stage Mast, 188” LiftHeight, 93” Mast, 50” Forks, Side Shift,7,441 Hours (2009) SEE PHOTO

8,000 Lb. Caterpillar ModelDP40K-D Diesel Powered SolidPneumatic Tire Lift Truck; S/NAT19C20401, 3-Stage Mast, 187” LiftHeight, 88” Mast Height, 48” Forks, SideShift, 6,368 Hours (2009) SEE PHOTO

8,000 Lb. Caterpillar ModelDP40K Diesel Powered SolidPneumatic Tire Lift Truck; S/NAT19C00799, 3-Stage Mast, 187” LiftHeight, 88” Mast Height, 48” Forks, SideShift, 3,321 Hours Showing **Not inService** (2006)

5,500 Lb. Caterpillar ModelP6000-D Diesel Powered SolidPneumatic Tire Lift Truck; S/N

AT14E20141, 3-Stage Mast, 186” LiftHeight, 85” Mast Height, 48” Forks, SideShift, 4,461 Hours (2008)

SCALES AND MISC.20,000 LB X 10’ Wide X 60’ LongIn-Ground Drive On Truck Scale;S/N 025852, Weight-Tronix Model W1-127GTN Electronic Read Out, Capacity20,000 Lb. X 20 Lb. SEE PHOTO

5,000 Lb. Capacity Floor TypePlatform Scale; S/N 029270, 48” X60” Platform Size with Drive on Rampson Each Side, Weigh-Tronix Model W1-125 Electronic Read Out, Capacity 5,000Lb. X 1 Lb. SEE PHOTO

Ameri-Shred Model AMS-1000Paper Shredder; S/N 1112142-A, 10HP, 16” Wide Conveyor type Feed Chute,Forward and Reverse Controls, 3 PHElectrics SEE PHOTO

11’ X 24’ Storage Shed, 48” WideEntry Door, Corrugated Metal Roof, 9’High at Gable Peak

TRUCKS ANDTRAILERS2005 Pro-Tainer Single Axle Re-Cycling Trailer; VIN #1P9RG21125A371609

1989 Volvo Tandem Axle SleeperCab Road Tractor; VIN #4V1WDBJF6KN6119, AutomaticTransmission, 991,037 Miles **Out ofService**

1993 International Model 4700Single Axle Box Truck; VIN #1HTSCPEM2PH54215, AutomaticTransmission, 418,328 Miles **Out ofService**

1999 Mazda Mini Van; VIN #JM3LW28G0Y0117900 **Out ofService**

SHOP EQUIPMENT Shop Equipment Consisting of; 5HP Ingersoll Rand 3-Stage Vertical TankAir Compressor, 90 AMP Lincoln WeldPak 125 HD Welder, 8-1/2 HP Troy-BiltGas Powered Pressure Washer, 6-1/2 HPTroy-Bilt Push Lawn Mover, Troy-Bilt XPWeed Trimmer, 5 Ton WestwardHydraulic Floor Jack, 6” Dayton BenchGrinders, Hydraulic Pallet Jack, FiberglassLadders, Shop Vacs, Trailer StabilizingJack, Electric and Pneumatic Hand Toolsand Other Assorted Mechanics HandTools

(14) Jesco 5-Yard Self Dumping Hoppers (6) Caterpillar & Bobcat Skid Steers New Holland Model T4040 4-Wheel Drive Tractor

(4) Extra Bobcat Model GRPL-74 Grapple Buckets

10,000 Lb. Caterpillar Model DP45K-D DieselPowered solid Pneumatic Tire Lift Truck

WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the Sale

Date, if you do not you will not be approved.

➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned SpendingBudget or $5,000.00 Minimum with Cincinnati Industrial Auctioneers in Order to beapproved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period.

IPS Model ATS-1080HS Open End Horizontal Hydraulic Baler w/ Auto-Tie2008 Bobcat Model S250 Skid Steer Loader

IPS Model 738CD-HS20 Horizontal Hydraulic Baler

NEW2000’s

NEW2008

NEW2008

NEW2006

NEW2009

30” X 45” X 60”Bale


Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

FIRST CLASS MAIL!

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM18% ONLINE BUYER’S PREMIUM

TERMS OF SALEFrom Downtown Atlanta, Georgia ProceedNorth on I-85 for 20 Miles to Exit 102 for GA-378/Beaver Ruin Rd. Turn Northwest onto GA-378/ Beaver Ruin Road Proceed 0.6 Mile toSatellite Boulevard. Turn Right onto to SatelliteBlvd Continue 1.2 Miles to Sale Site on Right.Watch for Auction Parking and Auction Signs.

DIRECTIONS

WEDNESDAY, AUGUST 31STWEDNESDAY, AUGUST 31ST

RECYCLING BANKOF GWINNETT

Although information has been obtained fromsources deemed reliable, the auctioneer makes nowarranty or guarantee, expressed or implied, as tothe accuracy of the information herein contained. It is for this reason that buyers should avail them-selves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions.Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily besold as described and/or photographed in this brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Facility Closed


4300 Satellite Boulevard Duluth, Georgia 30096

20 Miles Northeast of Downtown Atlanta, GA off I-85

(2) Recycling Lines(2) Recycling Lines (To 2008)(2) Recycling Lines (To 2008) (3) Lift Trucks (To 2008)(3) Lift Trucks (To 2008)(3) Lift Trucks (To 2008)

(3) IPS Balers (To 2008)(3) IPS Balers (To 2008)(3) IPS Balers (To 2008) (6) Cat & Bobcat Skid Steers(6) Cat & Bobcat Skid Steers(6) Cat & Bobcat Skid Steers


Facility Closed


4300 Satellite Boulevard – Duluth, Georgia 3009620 Miles Northeast of Downtown Atlanta, GA off I-85

SALE DATE:Wednesday, August 31st

STARTING: 10:00AMINSPECTION:

Tuesday, August 30th10:00 AM to 4:00 PM

CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com

Cincinnati Industrial Auctioneers, Inc. Jeffrey L. Luggen – GA License No. AUNR002532Joseph M. Luggen – GA License No. AU004100

AUCTIONEERS


RECYCLING BANK OF GWINNETT...Caterpillar Model P6000-D Diesel Powered Solid Pneumatic Tire Lift...

Documents

Transcript of RECYCLING BANK OF GWINNETT...Caterpillar Model P6000-D Diesel Powered Solid Pneumatic Tire Lift...