Recoil Products KEYSERT - Newman Tools Inc.Recoil® KEYSERT® Products Solid Threaded...
Transcript of Recoil Products KEYSERT - Newman Tools Inc.Recoil® KEYSERT® Products Solid Threaded...
Recoil®
KEYSERT® ProductsRecoil®
KEYSERT® ProductsSolid Threaded Inserts,Tooling, & Kits
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 1
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
Contents
Description, Features, Typical Applications
Installation and Removal
Thinwall and Heavy Duty Inch Series Carbon Steel Bulk Inserts
Thinwall and Heavy Duty Metric Carbon Steel Bulk Inserts
Solid Inch Series and Metric Carbon Steel Bulk Inserts
Extra Heavy Duty Inch Series Carbon Steel Bulk Inserts
Carbon Steel Cross-Reference Index
Thinwall and Heavy Duty Inch Series Stainless Steel Bulk Inserts
Thinwall and Heavy Duty Metric Stainless Steel Bulk Inserts
Tooling and 4-Piece Range Kits Carbon Steel and Stainless Steel
6-Piece and Master Range Kits Carbon Steel and Stainless Steel
1
1
2
4
6
7
8
9
10
3
5
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 2
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
1
Introduction
KEYSERT®
Thread Repair Inserts
The Solid Alternative for Thread RepairKeyserts are solid, one-piece, key-locking inserts used to repair damaged threads orfor use in original equipment. The Keysert locking keys provide a positive mechani-cal lock which prevents rotation due to vibration or torsion. Keyserts are available incarbon or stainless steel, both in inch and metric series. Thinwall, Heavy Duty, ExtraHeavy Duty, and Solid insert styles are available separately or in kits containing arange of sizes. Installation tools are also available separately or in a range kit.
Features• Installed with standard drills and taps• Easy installation• May be used in many materials; aluminum, magnesium, and cold rolled steel• Easy to remove
Typical Applications• Trucks, RV’s• Machinery, Small Engine• Molds, Tool and Die• MRO Tasks
Important Note• Keyserts are not recommended for use in brittle materials, like cast iron or plastic
Requests for more information are welcome. The user assumes full responsibility for hisor her applications. THERE IS NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.No one is authorized by our company to make oral warranties.
Installation and RemovalInstallation
Drill out old threads Tap new threads with Screw in the insert until Drive keys down with a standard drill. a standard tap. See slightly below surface. with severalNote: Drill is oversize - charts for proper size hammer taps onsee charts for proper and depth. the properdimensions. Chamfer installation tool.the hole with a standardcountersink (82°-100°).
Removal
Drill out material Deflect keys inward Remove insert using Same size replacementbetween keys and and break off. an E-Z Out or insert may be installedinternal thread with similar type tool. in the original hole.standard drill to specified depth (referto charts for properdimensions).
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 1
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
Carbon Steel Bulk Keyserts
2
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 2
www.newmantools.com
Carbon Steel Bulk Keyserts
3
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 3
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
Carbon Steel Bulk Keyserts
4
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 4
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
Carbon Steel Bulk Keyserts
5
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 5
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
Carbon Steel Bulk Keyserts
6
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 6
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
Stainless Steel Bulk Keyserts
7
* INDICATES PARTS NORMALLY AVAILABLE FROMSTOCK AND INTERNAL THREAD CLASS 3B.
LEAD TIMES AND MINIMUMS MAY APPLY ON ALLOTHER SIZES.
BOLD ITEMS HAVE A 3A EXTERNAL THREAD CLASS,ALL OTHERS HAVE A 2A EXTERNAL THREAD CLASS
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 7
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
Stainless Steel Bulk Keyserts
8
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 8
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
Tooling & 4-Piece Range Kits
9
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 9
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
6-Piece & Master Range Kits
10
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 10
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
6-Piece & Master Range Kits
11
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 11
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442
AF164 Keysert Horz.qxd 6/6/05 2:46 PM Page 12
Newman Tools Inc.185 Iber Rd.Ottawa, Ontario, Canada K2S 1E7
www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442