Recognition manual 2014 issue 1
description
Transcript of Recognition manual 2014 issue 1
To be used only in accordance with Superdrug’s site specific layout drawing
March 2014 – Issue 1
To be used only in accordance with Superdrug’s site specific layout drawing
This guide is designed as an aid to recognising component parts andThis guide is designed as an aid to recognising component parts andinstalling within Superdrug Pharmacy and associated areas
It is important that this guide is used only in accordance withIt is important that this guide is used only in accordance withSuperdrug’s site specific layout drawing
Recognition Manual 2014
Manual Contents
Delivery documentation Pages 2-3
Dispensary Pages 4-29• Contents Pages 4
Consultation Room Pages 30-41• Contents Pages 30
Nurses Room Pages 42-55• Contents Pages 42• Contents Pages 42
Page 1Recognition Manual 2014
On receipt of the equipment thedriver will present a copy of thedelivery note which will recordall component parts deliveredin consignment.
It will also show, under“pending” any equipment to“pending” any equipment tofollow.
Delivery Note
Page 2Recognition Manual 2014
PALLET CONTENTS SHEET
Job Number and Store Name
456-055867
Looking forSpecific Items
Delivery To SUPERDRUG at :
37 High Street
Town
County
Post Code
Job Ref. Client Delivery Date
Each pallet delivered will have apallet contents sheet stuck topolythene packaging.
This sheet lists only what isincluded on the pallet andenables specific parts to befound more quickly. Job Ref. Client Delivery Date
10699 01/02/03
PALLET SIZE _______ PALLET 3_______OF_____12___
QTY SUPERDRUG Part No. Cardinal Part No. DESCRIPTION
1 D500BH C6930-00 Bottle Hopper
found more quickly.
Some pallets may have severalparts packed upon it especiallyif they are small.
Retain all pallet sheets forfuture reference untilconsignment has beenunpacked and checked off. 1 D500BH C6930-00 Bottle Hopperunpacked and checked off.
PICKED/PACKED BY ___________________________ DATE ___________________
CHECKED BY _________________________________ DATE ___________________
Pallet Contents Sheet
Page 3Recognition Manual 2014
Dispensary Contents
Part no. Description Page
Typical overview part 1 5Typical overview part 2 6
D00BE Bookends 7D00CM Conical Measure Holder 8D00SBW Splash Back Wall Unit 8
Part no. Description Page
D760FSE Finished Scripts Extension Module 22, 23D760FSS Finished Scripts Starter Module 22, 23D760UEC Universal End Drawer Cover 23D00SBW Splash Back Wall Unit 8
D400BN Bin Cupboard inc PVC bin 9D520CDC Controlled Drugs Cabinet 10D500BH Bottle Hopper 11D500BSU Bottle Rack & Sink Unit 12D500DP Doop Unit Small 13D500OP Open Shelf Unit 14D500RX Prescription Storage 15D550UBC Under Worktop Boxed Corner 16D550UEP Under Worktop End Panel 16
D760UEC Universal End Drawer Cover 23D850CDC Controlled Drugs Cabinet 10D865CDC Controlled Drugs Cabinet 10D900NB Notice Board 24D1000ASS Adjustable Spur MFC Shelves 7D1000DP Doop Unit Large 25D1000GW Grey Worktop (Pill Accuracy Check) 26D1000OP Open shelf unit 27D1020COP Corner Open Shelf Unit 28D1500EM Ergo Mat 24D550UEP Under Worktop End Panel 16
D600IT IT Unit 17D600TEP Tall End Panel 18D650TBC Tall Boxed Corner 19D760AZE A-Z Medicine Storage Extension Module 20, 21D760AZS A-Z Medicine Storage Starter Module 20, 21
D1500EM Ergo Mat 24D3000WW White Worktop 26DCN0B Waste Bin 29DCN0WHS Wall Mounted Hand Sanitiser 8DCN0WPT Wall Mounted Paper Towel Dispenser 8
Page 4Recognition Manual 2014
D1
00
0G
W
D3
00
0W
W
D1
00
0A
SS
D3
00
0W
W
D5
00
RX
D5
00
P
D4
00
BN
D6
00
IT
D5
00
BH
D1
50
0EM
D4
70
CD
C
D6
50
TBC
D6
00
TEP
Typical Dispensary OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units
Page 5
D4
00
BN
D5
00
BH
D1
50
0EM
D4
70
CD
C
D6
50
TBC
D6
00
TEP
Recognition Manual 2014
D3
00
0W
W
D1000GW
D3
00
0W
W
D7
60
AZE
D7
60
AZS
D7
60
FSS
D6
50
TBC
Typical Dispensary OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units
Page 6
D7
60
AZE
D7
60
AZS
D7
60
FSS
D6
50
TBC
Recognition Manual 2014
1
22
3
4
5
6
7
8
9
Adjustable Spur MFC Shelves
Critical Dimensions
Installation Detail•Set Spur 150mm above the worktopto allow space for low level (90mm)electrical trunking. Set low leveltrunking flush with worktop to allowa 60mm gap between top oftrunking and the underside of the
10
11
12
13
14
15
16
17Critical Dimensions990(w) x 250(d) x18(h) mm per shelfSent to site as a set of 5no shelves,2no 710mm spur uprights & 5nopairs of 200mm brackets
trunking and the underside of thebottom spur shelf.•Space brackets as per set out tothe right.•Make allowances for IT Monitorswhen setting out on site.•Use appropriate wall fixings.
17
18
19
20
21
22
D00BEIf Bookends are specifiedleave loose on spurshelves for use bypharmacy team.
Recognition Manual 2014 Page 7
Part no D00BE - BookendsPart no D1000ASS - Adjustable Spur MFC Shelves
pharmacy team.
CT34069 Paper Towel Dispenser265(h) x 290 (w) x 145(d) mmNB Key to open dispenser isincluded and should be handedto Pharmacy manager
DCN0WHS Wall MountedHand Sanitiser
265(h) x 156(w) x 96(d) mm
D00SBW – Splash Bach Wall unit
Critical Dimensions600(h) x 990(w) x 12(d) mm
Installation Detail•Use appropriate fixings or gripfill to fix splash backabove bottle rack & sink unit•Seal joint with white silicon
Part no D00CM Conical Measure HolderPart no D00SBW Splash Back Wall Unit
D00CM Conical Measure Holder200(h) x 370(w) x 150(d)
•Seal joint with white silicon•Add ancillary items to positions indicated onelevation
Part no D00SBW Splash Back Wall UnitPart no DCN0WHS Wall Mounted Hand SanitiserPart no DCN0WPT Wall Mounted Paper Towel Dispenser
Recognition Manual 2014 Page 8
Critical Dimensions400(w) x 520(d) x 910(h)mm
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall Capacity: 39 Litres
Part no. D400BN Bin Cupboard including pvc bin
Recognition Manual 2014
•A void to rear of unit and wallallows for plumbing etc.
Page 9
Capacity: 39 LitresDimensions: 500mm x 380mmx 280cm
N.B. Cabinets are must only to be fixed to concrete floor or structural wall with ragbolts. Where the pharmacy is on a raised floor create suitable groundings directlyto actual flooring.to actual flooring.
CDC500 CDC570CDC760
Installation Detail•Position on floor /wall asindicated on layout drawing
CDC500500w x 850h x 450dFloor fixed
CDC570570w x 520h x 200dWall fixed
CDC760760w x 865h x 305dFloor/Wall fixed
Part no D500CDC Controlled Drugs CabinetPart no D570CDC Controlled Drugs CabinetPart no D760CDC Controlled Drugs Cabinet
indicated on layout drawing•Fix only to concrete floor orstructural wall with rag bolts
Recognition Manual 2014 Page 10
Critical Dimensions500(w) x 520(d) x 920(h) mm
Installation Detail•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wallallows for plumbing etc.
NoteTop two drawers havedividers for cartons
Part no D500BH Bottle Hopper
allows for plumbing etc. dividers for cartons
Recognition Manual 2014 Page 11
Critical Dimensions500(w) x 520(d) x 920(h) mm500(w) x 520(d) x 920(h) mm
NoteBottle rack is removable toallow access to waste & waterheater .
Installation Detail•Cut hole in back to allowaccess to plumbing•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall
heater .
Sink SpecUniversally Handed Space Saver -620 x 500.
Tap SpecMonobloc Mixer Tap
Part no D500BSU - Bottle Rack & Sink Unit
Recognition Manual 2014
•A void to rear of unit and wallallows for plumbing etc.
Page 12
Critical Dimensions500(w) x 520(d) x 920(h) mm
Note1no adjustable shelf toeach unit.
Installation Detail
•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wall
Part no D500DP - Doop Unit Small
each unit.
Recognition Manual 2014
•A void to rear of unit and wallallows for plumbing etc.
Page 13
NoteIncludes 3no adjustableshelves
Critical Dimensions500(w) x 520(d) x 920(h) mm
shelves
Installation Detail•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wallallows for plumbing etc.
Part no. D500OP - Open Shelf Unit
Recognition Manual 2014
allows for plumbing etc.
Page 14
Note•Suited locks to full
Critical Dimensions500(w) x 520(d) x 920(h) mm
•Suited locks to fullrange, each drawer hasbinning strip withacrylic dividers.•Dividers to three topdrawers
Installation Detail•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wallallows for plumbing etc.
Part no. D500RX - Prescription Storage
Recognition Manual 2014
allows for plumbing etc.
Page 15
Critical Dimensions920x550x18mm
Under Worktop End Panels
Installation Detail•Use top & bottom Uchannel or appropriatefixings to fix to end unit.
Critical Dimensions920x550x550mm
Installation Detail•Use appropriate fixings to fix U channel to underside of
Under Worktop Boxed Corner
•Use appropriate fixings to fix U channel to underside ofworktop and floor.•Position first top & bottom U channels 530mm fromwall.•Position second set 550mm from adjacent wall•Panels are supplied oversized so that they can bescribed to fit•Slide panels into position and cover front corner withwhite PVC angle trim
Part no. D550UBC - Under Worktop Boxed CornerPart no. D550UEP - Under Worktop End panels
Recognition Manual 2014 Page 16
Critical Dimensions600(w) x 520(d) x 920(h) mm
NoteCut out to rear to enablecabling.
Installation Detail•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•Void to rear of unit and wallallows for plumbing etc.
Part no. D600IT - IT Unit
Recognition Manual 2014
allows for plumbing etc.
Page 17
D18TEP Tall End Panel
Critical DimensionsCritical Dimensions3000(w) x 600(h) x 30(d) mm
Installation Detail•Panel has pre-drilled holes for fixing to perimeter post•Use appropriate fixings to fix end panel to perimeterpostpost•Use white screw caps to cover any visible screws•Seal joint to wall with white silicon
Part no. D600TEP – Tall End Panel
Page 18Recognition Manual 2014
Critical Dimensions2400(h) x 650(d) x 650(w) mm
Installation Detail
•Create boxed corner from 50mm x 50mm softwood andwhite MFC panels supplied•Use appropriate fixings to fit softwood to walls•Use appropriate fixings to fix panels into position andcover front corner with white PVC angle trim•Use white screw caps to cover any visible screws
Part no. D650TBC – Tall Boxed Corner
•Use white screw caps to cover any visible screws•If ceiling height exceeds 2400mm cut wall batons fromsoftwood provided and fix to wall to take lid
Recognition Manual 2014 Page 19
Part no. D760AZS - A-Z Medicine Starter Module
Part no. D760AZE - A-Z Medicine Extension Module
CautionIt is vital that system posts are installed in astraight line ,vertical and level and fixed at 2nopoints on each individual post utilising suppliedadjustable wall fixing brackets
Recognition Manual 2014 Page 20
1. Erect frame of perimeterlegs and tie bars usingM10x50mm bolts, washersand nuts. Use 3no tie barsper module.per module.
The tie bars are handed ,ensure bar faces front onbrackets
Do not over tighten.
2. Use adjustable feet to level
3. Use two wall fixingbrackets per upright, at alltimes using appropriatefixings to ensure posts areflush with each other2. Use adjustable feet to level
frame
flush with each other
Critical Dimensions 2100mm x 760mm x 610mm
7. Fit pull out shelves into postsstarting at bottom. The bottom shelfto occupy notches 11 & 13. Leave2no empty notches between eachsubsequent shelf
6. Slide into position baseplinth drawers
4. When all of the posts are inposition screw on the baseplinth covers.
5. Hang back panelson to tie bars
Critical Dimensions 2100mm x 760mm x 610mm
Recognition Manual 2014
Part no. D760AZS - A-Z Medicine Starter Module
Part no. D760AZE - A-Z Medicine Extension Module
Page 21
Part no. D760FSS Finished Scripts Starter Module
Part no. D760FSE Finished Scripts Extension Module
CautionIt is vital that system posts are installed in astraight line ,vertical and level and fixed at 2nopoints on each individual post utilising suppliedadjustable wall fixing brackets
Page 22Recognition Manual 2014
1. Build frame as in A-Zmodules but use “L” shapedposts rather than “h” shapedposts
2. Start at bottom and fit2. Start at bottom and fitdeep drawers into lowestpossible notches
3. Fit lower pull out shelfinto notch 41 and thenleave 3no. notchesbetween each shelf above
4. Fit opal acrylic fronts to5no. Pull out shelves
D760UEC Universal End Drawer Cover1. Use Universal End Drawer cover on proceeding A-Zmodule if Finished Scripts module is part of same run
Part no. D760FSS Finished Scripts Starter Module
Enablestransition fromA-Z “h” leg toFinished scripts“L2 leg
Recognition Manual 2014
Part no. D760FSS Finished Scripts Starter ModulePart no. D760FSE Finished Scripts Extension ModulePart no. D760UEC Universal End Drawer Cover
Page 23
D900NB – 900x600mmWhiteboard to be fixed to wallwhere indicated on layoutdrawing
D150EMErgo mat to be loose laid asindicated on layout drawing
Part no D900NB - Notice BoardPart no D150EM - Ergo Mat
Recognition Manual 2014 Page 24
Installation Detail
Critical Dimensions1000(w) x 520(d) x 920(h) mm
Note
Installation Detail•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wallallows for plumbing etc.
Part no D1000DP - Doop Unit Large
Note1no adjustable shelf.
Recognition Manual 2014 Page 25
Accuracy Checking Area Worktop
The accuracy area is indicated on the layout
Critical Dimensions1000(w) x 600 (d) x 30(h) mm
The accuracy area is indicated on the layoutdrawing by the dotted area
Critical Dimensions3000(w) x 600 (d) x30(h) mm
White work tops
Installation Detail•Cut to appropriate length as required on site•Exposed ends should always overrun 25mm•Edge all exposed ends•Create a masons mitre for all corner joints•Use 3no work top connectors to all joints•Use appropriate fixings to fix top to unitsunderneath
3000(w) x 600 (d) x30(h) mm
Installation Detail•Where indicated on layout drawing fit grey wok top•Exposed ends should always overrun 25mm•Edge all exposed ends•Create a masons mitre for any corner joints•Use 3no work top connectors to all joints•Use appropriate fixings to fix top to units underneath•Seal joint to wall with white silicon
Part no D1000GW - Grey WorktopPart no D3000WW - White Worktop
underneath•Seal joint to wall with white silicon
Page 26Recognition Manual 2014
NoteIncludes 3no adjustableshelves
Installation Detail•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktop•A void to rear of unit and wallallows for plumbing etc.
Critical Dimensions1000(w) x 520(d) x 920(h) mm
allows for plumbing etc.
Part no. D1000OP - Open Shelf Unit
Page 27Recognition Manual 2014
Critical Dimensions1020(w) x 1020(d) x 920(h) mm1020(w) x 1020(d) x 920(h) mm
Installation Detail•Ensure unit is level usingadjustable feet•Use appropriate fixings to fixthrough to neighbouring unit.
and to underside of worktopand to underside of worktop•A void to rear of unit and wallallows for plumbing etc.
Part no. D1020COP - Corner Open Shelf Unit
Page 28Recognition Manual 2014
Critical Dimensions500(w) x 520(d) x910(h)mm
Installation Detail
•Level using adjustable feet.•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits.•If Needle Exchange chute isrequired cut worktop usingchute as a template.•For Sharps Flap specificationplease see page 34
•Waste Bin to stand inside one of thelockable storage cupboards.•Yellow Needle bin supplied by LocalAuthority
CN500LSC Lockable Storage CupboardDCN0B Waste Bin
Recognition Manual 2014 Page 29
Consultation Room Contents
Part no. Description Page
Typical overview 31
CN377DDP Drop Down Desk c/w PC Housing 32CN500DCU Drawer & Cupboard Unit 33CN500LSC Lockable Storage Cupboard 34CN500PFU Printer Shelf (Pull out) & Filing Unit 35CN500PFU Printer Shelf (Pull out) & Filing Unit 35CN500WLH Wall Mounted Cupboard L/H 36CN500WOS Wall Mounted Open Shelves 37CN500WRH Wall Mounted Cupboard R/H 36CN926WD Consultation Room Door 38CN2000SB Brushed Laminate Splash Back 39CN2000PCB Plinth Cover to Cons Room Base Units 40CN00A Chair with Arms – Green 41CN00HM Height Measure – Wall mounted 41CN00MT Mixer Tap 40CN00MT Mixer Tap 40CN00S Sink 40CN00SF Sharps Flap 40CN00WA Chair without Arms – Green 41CN00WGD Wall Mounted Glove Dispenser 39CN00WS Weighing Scales 41D3000WW White Worktop 40DCN0B Waste Bin 34DCN0WHS Wall Mounted Hand Sanitiser 39DCN0WPT Wall Mounted Paper Towel Dispenser 39DCN0WPT Wall Mounted Paper Towel Dispenser 39
Page 30Recognition Manual 2014
CN
50
0W
RH
CN
50
0P
FU
CN
50
0W
OS
CN
50
0W
LH
CN
50
0W
LH
CN
50
0W
RH
CN
50
0P
FU
CN
50
0W
OS
CN
50
0W
LH
CN
50
0W
LH
CN00LHCN2000SB
CN00LH
CN377DDPD3000WW
D1
50
0EM
D1
50
0EM
CN2000PCB
D1
50
0EM
Typical Consultation Room OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units
Page 31
D1
50
0EM
D1
50
0EM
D1
50
0EM
Recognition Manual 2014
Critical Dimensions600(w) x 377(d) x 750(h) mm
Installation Detail•Ensure open end faces wallunits and closed end facespatient•Use appropriate fixings to fixto wall•To change handing remove topand rotate 180*.
Part no CN377DDP Drop Down Desk
and rotate 180*.
Recognition Manual 2014 Page 32
Critical Dimensions500(w) x 520(d) x 910(h) mm
Installation Detail•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits
Cupboard can beused for Clinicalbin.
Part no CN500DCU Drawer & Cupboard Unit
Recognition Manual 2014 Page 33
Critical Dimensions500(w) x 520(d) x910(h)mm
Installation Detail
•Level using adjustable feet.•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits.•If Needle Exchange chute isrequired cut worktop usingchute as a template.•For Sharps Flap specificationplease see page 34
•Waste Bin to stand inside one of thelockable storage cupboards.•Yellow Needle bin supplied by LocalAuthority
CN500LSC Lockable Storage CupboardDCN0B Waste Bin
Recognition Manual 2014 Page 34
Back of unit is open to allow accessto power and data sockets
PANIC ALARM - Site electrician toposition alarm in side top corner of unit
to power and data sockets
Critical Dimensions500(w) x 520(d) x 910(h) mm
Installation Detail•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits
Part no CN500PFU mm Printer & File Unit
Recognition Manual 2014 Page 35
Critical Dimensions600(h) x 500(w) x350(d) mm
Critical Dimensions600(h) x 500(w) x350(d) mm
600(h) x 500(w) x350(d) mm
Installation Detail•All wall units should be fixed 550mm abovefinished worktop to allow for splashback•Use appropriate fixings to fix to wall•Use white screw caps to cover any visible screws
600(h) x 500(w) x350(d) mm
Part no CN500WLH Wall Cupboard R/HPart no CN500RLH Wall Cupboard L/H
Recognition Manual 2014 Page 36
Critical Dimensions600(h) x 500(w) x350(d) mm
Installation Detail•All wall units should be fixed 550mm abovefinished worktop to allow for splashback•Use appropriate fixings to fix to wall•Use white screw caps to cover any visible screws
Part no CN500WOS Wall Mounted Open Shelves
Recognition Manual 2014 Page 37
Cross logo suppliedby signage contractor
Critical DimensionsCritical Dimensions2040(h) x 926(w) x 45(d) mm
Installation Detail
•Sent to site without blind orhinges attached (but supplied)to enable door to be handed onsitesite
•Door is supplied withundercoat. Top coat must beadded on site
•Fix blind to rear of door usingappropriate fixings
•Fix door hook to rear of door
Part no CN926WD Consultation Room Door
•Fix door hook to rear of doorcentralised at 1600mm high
Recognition Manual 2014 Page 38
Splash Back
CT34069 Paper Towel Dispenser265(h) x 290 (w) x 145(d) mmNB Key to open dispenser isincluded and should be handedto Pharmacy manager
DCN0WHS Wall MountedHand Sanitiser
265(h) x 156(w) x 96(d) mm
Critical Dimensions2000(w) x 550(h) x 18(d) mm
Installation Detail•Use appropriate fixings orgripfill to fix splash back.
Splash BackPre Laid Brushed AluminiumMDF
to Pharmacy manager
Part no CN2000SB Splash Back
gripfill to fix splash back.•Add ancillary items to positionsindicated on elevation•Please ensure that there isenough clearance above toweldispenser to allow with openingkey
Dispenser 100(h) x 270(w) x95(d) mm
Part no CN2000SB Splash BackPart no CN00WGD Wall Mounted GlovePart no DCN0WHS Wall Mounted Hand SanitiserPart no DCN0WPT Paper Towel DispenserRecognition Manual 2014 Page 39
Installation Detail
•Cut worktop to length•Edge any exposed ends•Fit to top of base units using appropriate fixings•Fit to top of base units using appropriate fixings•Cut hole for sink and mixer tap as indicated on layoutdrawing•Cut hole for Sharps flap if required•Fix plinth to base units using gripfill or appropriatefixings
Part no D3000WW WorktopPart no CN00S Sink
CN2000PCBBrushed Aluminium Laminate
CN00SF Sharps Flap fittingdetail
Part no CN00S SinkPart no CN00MT Mixer TapPart no CN00SF Sharps FlapPart no CN2000PCB Plinth to Base Unit
Brushed Aluminium Laminatefaced mdf plinth 2000mm x100mm x 18mm
Page 40Recognition Manual 2014
Consultation Ancillary ItemsPart no CN00WA Chair without ArmsPart no CN00A Chair with Arms
Installation Detail
•Position all ancillary items asper layout drawing
Part no CN00A Chair with ArmsPart no CN00HM Height measurerPart no CN00WS Weighing scales
per layout drawing•Use appropriate fixings to fixheight measurer to wall
Page 41Recognition Manual 2014
Nurses Room Contents
Part no. Description Page
Typical overview 43
CN377DDP Drop Down Desk c/w PC Housing 44CN500DCU Drawer & Cupboard Unit 45CN500LSC Lockable Storage Cupboard 46CN500PFU Printer Shelf (Pull out) & Filing Unit 47
Part no. Description Page
CN00WA Chair without Arms – Green 53CN00WGD Wall Mounted Glove Dispenser 51CN00WS Weighing Scales 53D3000WW White Worktop 52CN500PFU Printer Shelf (Pull out) & Filing Unit 47
CN500WLH Wall Mounted Cupboard L/H 48CN500WOS Wall Mounted Open Shelves 49CN500WRH Wall Mounted Cupboard R/H 48CN926WD Consultation Room Door 50CN2000SB Brushed Laminate Splash Back 51CN2000PCB Plinth Cover to Cons Room Base Units 52CN00A Chair with Arms – Green 53CN00HM Height Measure – Wall mounted 53CN00MT Mixer Tap 52
D3000WW White Worktop 52DCN0B Waste Bin 46DCN0WHS Wall Mounted Hand Sanitiser 51DCN0WPT Wall Mounted Paper Towel Dispenser 51N00CC Curtain Cubicle 54N00CCR Curtain Rail 54N00CR Couch Rolls 54N00CWA Nurses Desk Chair with Arms 55N00EC Examination Couch 54N00EL Examination Lamp 55CN00MT Mixer Tap 52
CN00S Sink 52CN00SF Sharps Flap 52
N00EL Examination Lamp 55N500WM Wall Mirror 55N1200DK Desk to Nurses Room 55
Page 42Recognition Manual 2014
CN
92
6W
DC
N9
26
WD
N0
0C
C
N0
0EC
Typical Nurses Room OverviewPlease refer to Superdrug site specific layout drawing for exact configuration of units
Page 43Recognition Manual 2014
Critical Dimensions600(w) x 377(d) x 750(h) mm
Installation Detail•Ensure open end faces wallunits and closed end facespatient•Use appropriate fixings to fixto wall•To change handing remove topand rotate 180*.
Part no CN377DDP Drop Down Desk
and rotate 180*.
Recognition Manual 2014 Page 44
Critical Dimensions500(w) x 520(d) x 910(h) mm
Installation Detail•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits
Cupboard can beused for Clinicalbin.
Part no CN500DCU Drawer & Cupboard Unit
Recognition Manual 2014 Page 45
Critical Dimensions500(w) x 520(d) x910(h)mm
Installation Detail
•Level using adjustable feet.•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits.•If Needle Exchange chute isrequired cut worktop usingchute as a template.•For Sharps Flap specificationplease see page 34
•Waste Bin to stand inside one of thelockable storage cupboards.•Yellow Needle bin supplied by LocalAuthority
CN500LSC Lockable Storage CupboardDCN0B Waste Bin
Recognition Manual 2014 Page 46
Back of unit is open to allow accessto power and data sockets
PANIC ALARM - Site electrician toposition alarm in side top corner of unit
to power and data sockets
Critical Dimensions500(w) x 520(d) x 910(h) mm
Installation Detail•Level using adjustable feet.•Use appropriate fixings to fixthrough to wall & neighbouringunits
Part no CN500PFU mm Printer & File Unit
Recognition Manual 2014 Page 47
Critical Dimensions600(h) x 500(w) x350(d) mm
Critical Dimensions600(h) x 500(w) x350(d) mm
600(h) x 500(w) x350(d) mm
Installation Detail•All wall units should be fixed 550mm abovefinished worktop to allow for splashback•Use appropriate fixings to fix to wall•Use white screw caps to cover any visible screws
600(h) x 500(w) x350(d) mm
Part no CN500WLH Wall Cupboard R/HPart no CN500RLH Wall Cupboard L/H
Recognition Manual 2014 Page 48
Critical Dimensions600(h) x 500(w) x350(d) mm
Installation Detail•All wall units should be fixed 550mm abovefinished worktop to allow for splashback•Use appropriate fixings to fix to wall•Use white screw caps to cover any visible screws
Part no CN500WOS Wall Mounted Open Shelves
Recognition Manual 2014 Page 49
Cross logo suppliedby signage contractor
Critical DimensionsCritical Dimensions2040(h) x 926(w) x 45(d) mm
Installation Detail
•Sent to site without blind orhinges attached (but supplied)to enable door to be handed onsitesite
•Door is supplied withundercoat. Top coat must beadded on site
•Fix blind to rear of door usingappropriate fixings
•Fix door hook to rear of door
Part no CN926WD Consultation Room Door
•Fix door hook to rear of doorcentralised at 1600mm high
Recognition Manual 2014 Page 50
Splash Back
CT34069 Paper Towel Dispenser265(h) x 290 (w) x 145(d) mmNB Key to open dispenser isincluded and should be handedto Pharmacy manager
DCN0WHS Wall MountedHand Sanitiser
265(h) x 156(w) x 96(d) mm
Critical Dimensions2000(w) x 550(h) x 18(d) mm
Installation Detail•Use appropriate fixings orgripfill to fix splash back.
Splash BackPre Laid Brushed AluminiumMDF
to Pharmacy manager
Part no CN2000SB Splash Back
gripfill to fix splash back.•Add ancillary items to positionsindicated on elevation•Please ensure that there isenough clearance above toweldispenser to allow with openingkey
Dispenser 100(h) x 270(w) x95(d) mm
Part no CN2000SB Splash BackPart no CN00WGD Wall Mounted GlovePart no DCN0WHS Wall Mounted Hand SanitiserPart no DCN0WPT Paper Towel DispenserRecognition Manual 2014 Page 51
Installation Detail
•Cut worktop to length•Edge any exposed ends•Fit to top of base units using appropriate fixings•Fit to top of base units using appropriate fixings•Cut hole for sink and mixer tap as indicated on layoutdrawing•Cut hole for Sharps flap if required•Fix plinth to base units using gripfill or appropriatefixings
Part no D3000WW WorktopPart no CN00S Sink
CN2000PCBBrushed Aluminium Laminate
CN00SF Sharps Flap fittingdetail
Part no CN00S SinkPart no CN00MT Mixer TapPart no CN00SF Sharps FlapPart no CN2000PCB Plinth to Base Unit
Brushed Aluminium Laminatefaced mdf plinth 2000mm x100mm x 18mm
Page 52Recognition Manual 2014
Consultation Ancillary ItemsPart no CN00WA Chair without ArmsPart no CN00A Chair with Arms
Installation Detail
•Position all ancillary items asper layout drawing
Part no CN00A Chair with ArmsPart no CN00HM Height measurerPart no CN00WS Weighing scales
per layout drawing•Use appropriate fixings to fixheight measurer to wall
Page 53Recognition Manual 2014
Installation Detail
•Fix Curtain rail to ceiling asindicated on layout drawing
Critical Dimensions780mm high x1930mm long x600mm deep
Part no N00EC Examination CouchPart no N00CR Couch RollsPart no N00CC Cubicle CurtainPart no N00CR Curtain Rail
indicated on layout drawing 600mm deep
Nurses Room Overview
Part no N00CR Curtain Rail
Recognition Manual 2014 Page 54
N1200DK Desk to Nurses Room
Critical Dimensions730mm high x 1200 length x800mm deep
N00CWA Nurse DeskChair with Arms
N00EL Examination Lamp
Installation Detail
•Use appropriate fixings to fit rail toN500WM Wall MirrorChair with Arms
Critical Dimensions1130mm high x 470 width x 470mm deep
•Use appropriate fixings to fit rail towalls at 1100mm high•Slot lamp on to rail•Electrical contractor to wire to spurwith flexi cable
N500WM Wall Mirror1500mm high x 500 wide
Installation Detail•Use appropriate fixings to fit mirrorto wall 400mm from the floor•Use mirror screw caps to coverfixings
Part no N1200DK Desk to Nurses Room
Recognition Manual 2014 Page 55
Part no N1200DK Desk to Nurses RoomPart no N00CWA Nurse Desk Chair with ArmsPart no N500WM Wall MirrorPart no N00EL Examination Lamp