REBAR CUTTER RAPID CUT 12L · RapidCut 12L Pneumatic Rebar Cutter The RapidCut 12L is ideal for...
1
P: 1300 255 266 E: [email protected] W: allcongroup.com.au Model RCUT12L Max Cutting Range 12mm (70kg/mm2) Cutting Velocity 20 Cuts Per Minute Air Pressure Required 90-120 PSI (6-8.5 Bar) Air Consumption: Approx 24L / Cut at 7 Bar Replacement Jaws: 1260TM Weight 12kg Dimensions (LxWxH) 940mm x 250mm x 250mm REBAR CUTTER RAPID CUT 12L RapidCut 12L Pneumatic Rebar Cutter The RapidCut 12L is ideal for cutting rebar and mesh up to 12mm in thickness. The Pneumatic cutter has the same jaw action as standard bolt cutters and very simple to use and handle. The 12L features a longer stem meaning they can be used without needing to bend over reducing fatigue and back strain. They require minimal maintenance, reducing down time and making them a very cost-effective tool in demanding applications. The flat profile of the jaw means mesh can be cut while it is flat on the ground. These units are best suited to precast yards and mesh processing facilities.
Transcript of REBAR CUTTER RAPID CUT 12L · RapidCut 12L Pneumatic Rebar Cutter The RapidCut 12L is ideal for...
P: 1300 255 266E: [email protected]: allcongroup.com.au
Model RCUT12L
Max Cutting Range 12mm (70kg/mm2)Cutting Velocity 20 Cuts Per MinuteAir Pressure Required 90-120 PSI (6-8.5 Bar)Air Consumption: Approx 24L / Cut at 7 BarReplacement Jaws: 1260TMWeight 12kgDimensions (LxWxH) 940mm x 250mm x 250mm
REBAR CUTTERRAPID CUT 12L
RapidCut 12L Pneumatic Rebar Cutter
The RapidCut 12L is ideal for cutting rebar and mesh up to 12mm in thickness. The Pneumatic cutter has the same jaw action as standard bolt cutters and very simple to use and handle. The 12L features a longer stem meaning they can be used without needing to bend over reducing fatigue and back strain. They require minimal maintenance, reducing down time and making them a very cost-effective tool in demanding applications. The flat profile of the jaw means mesh can be cut while it is flat on the ground. These units are best suited to precast yards and mesh processing facilities.
