REAR BLADES - Bison · rear blades t/tl/f series nvha series ... ln ln hp ln ° nvhf-152 5 250...
-
Upload
doannguyet -
Category
Documents
-
view
232 -
download
0
Transcript of REAR BLADES - Bison · rear blades t/tl/f series nvha series ... ln ln hp ln ° nvhf-152 5 250...
NVHL SERIES
REAR BLADES
T/TL/F SERIES NVHA SERIES
REGULAR DUTY SERIES
EXTRA HEAVY DUTY SERIES
Carretera a Paso Blanco Km. 2 No. 400 / Col. Vista Hermosa C.P. 20905Jesús María, Aguascalientes, México
Tel. (449) 92-BISON / Fax. (449) 922 4767
www.bison.com.mx01 800 52 BISON
SPECIFICATIONS NVHL-240-XHD NVHL-270-XHD NVHL-300-XHD
Moldboard WidthApproximate weightKing pin diameterMoldboard height & thicknessCutting edge
Maximum tractor hpHitchSwing angleOffset adjustmentTilt adjustment
81240*/1450**
91280*/1490**
101320*/1530**
419” x 5/16” (whit full box frame)
1/2" x 6"
160 (2WD) & 145 (4WD)3 - point cat. II, II quick hitch, III
0 to 45º left or right (manual or hydraulic)1
0 to 32 3/8 left or right (manual or hydraulic)1
0 to 12º up or down (manua or hydraulic)3
ftlb
inin
hpin
SPECIFICATIONS
Moldboard width Approximate weight Moldboard height & thicknessCutting edge
Maximum tractor hp Hitch
Swing angle
Offset adjustmentTilt adjustment
ftlblnln
hp
ln
°
NVHF-152
5250
NVHF-182 NVHF-212
7310
6280
NVH-120-T
4345
NVH-150-T NVH-210-T NVH-240-T NVH-180-T(LT)
5375
6404 (372)
7433
8462
6 left or right
2 5/817’’ x 1/4’’ 1/2” x 6” high carbon-steel blade (3/8” x 4” spring steel blade),
reversible, interchangeable65 (2WD) & 60 (4WD)
3 - point category I and I quick hitch1
18º, 35º and 53º, left or right, 3 forward and 3 reverse positions
6 or 12 left or right7.5º, 15º, 22.5º and 30º up or down
12 1/2’’ x 1/4’’1/2" x 6" high carbon-steel
blade, reversible, interchangeable
55 (2WD) & 50 (4WD)3 - point category I and
I quick hitch1 20º, 40º and 60º,
left or right, 3 forward and 3 reverse positions
0 to 12 left or right0º to 20º up or down
SPECIFICATIONS NVH-210 NVH-240 NVH-270
Moldboard widthApproximate weightKing pin diameterMoldboard height & thicknessCutting edge
Maximum tractor hpHitchSwing angle
Offset adjustment
Tilt adjustment
7677
65 80
8706
9800
318 x 1/4”
1/2" x 6" high carbon-steel blade,reversible, interchangeable
3 - point category II15º, 30º and 45º, left or right,
3 forward and 3 reverse positions9 or 18 left or right
(manual or hydraulic)1
7.5º, 15º, 22.5º up or down
ftlbinin
hp
in
SPECIFICATIONSNVH
240-XHDNVH
270-XHDNVH
300-XHDMoldboard width Approximate weight king pin diameterMoldboard height & thicknessCutting edge
Maximum tractor hp HitchSwing angle Offset adjustment
Tilt adjustment
8926
91,020
101,069
319” x 5/16” 1/2" x 6" high carbon-steel
blade, reversible, interchangeable120 (2WD) & 110 (4WD)
3 - point category II and II quick hitch4Forward or reverse positions,
3, up to 45º left or right2, up to 18 left or right (manual)0 a 19º left or right (hydraulic)1
3, up to 23º up or down
ftlbinin
hp
in
NHVH212-XHD
NHVH242-XHD
NHVH272-XHD
NHVH302-XHD
71060 (manual)
1162 (hyd.)
81139 (manual)1241 (hyd.)
91240 (manual)1342 (hyd.)
101300 (manual)1402 (hyd.)
319” x 5/16”
1/2" x 6" high carbon-steel blade, reversible, interchangeable
120 (2WD) & 110 (4WD)3 - point category II and II quick hitch4
Forward or reverse positions.0º to 45º left or right (hydraulic)1,30 to 19 left or right (hydraulic)1,3
0º to 15º up or down (hydraulic)2,3
NVHL SERIES
REGULAR DUTY SERIES
SPECIFICATIONS NVHA-180 NVHA-210 NVHA-240
Moldboard widthApproximate weightAngle, tilt & offset
Moldboard height & thicknessCutting edgeMaximum tractor hpHitchMoldboard upper edgeOffset adjustmentTilt adjustment
6330
7366
8391
Manual or Hydraulically adjusted angleand manually tilt and offset15” height, 1/4“ thickness
1/2" x 6" reversible60 hp (4WD)3 Point CAT I
Full Bend6” or 12” left or right
0 to 20 degrees up or down
ftlbin
in
hp
in
NVHA SERIES
T/TL/F SERIES
EXTRA HEAVY DUTY SERIES
360 Swing Angle*Parking Stand Included