7/28/2019 ReadMe Install Instructions v2.2

1/1

SeisImager Installation Instructions Page 1 of 1

Version 2.2, December 2006

New and Upgrade Installation Instructions for the SeisImagerSuite of Software SeisImager/2D and SeisImager/SW

The SeisImager software CD is supplied (1) for trial evaluation of the programs, (2) for purchase, rental, or upgrade of oneof the programs, or (3) with purchase of a Geode, ES-3000, or StrataVisor NZ seismograph, which all include the Liteversion of SeisImager/2D. The single CD contains all programs and all documentation.

1.0 Installation Instructions

1. Insert the SeisImager CD into the CD drive.2. Double click on the file named SeisImager_e_wt.msi to install the program. The Welcome to the SeisImager_e

Setup Wizard window will appear as follows.a. If you are presented with the option to Repair SeisImager_e orRemove SeisImager_e, the installer

has detected an older version. Select Remove SeisImager_e and click on Finish, then Close afterthe uninstall process is complete. Double click again on the file SeisImager_e_wt.msi to install thenew version as described in Step 2b.

b. If an older version is not detected, you will be presented with the installer. Click on Next, indicate thedirectory for installation (use the default directory), click on Next, Next, and Close.

3. To copy the SeisImager manuals to your hard drive (will require about 150 Mb), select the foldersSeisImager2D_Manual and SeisImagerSW_Manual on the CD and copy to your hard drive in the desired location.Note that the SeisImager2D_Manual folder contains .avi video clips that must reside in the same location as thefiles SeisImager2D_Manual_vX.X.pdf and SeisImager2D_Examples_vX.X.pdf (where X.X is the current version).

You will need Adobes freeware program Acrobat Reader to view the manual files. If you need this program, go tothe Adobe website to download the latest version compatible with your operating system.

2.0 Getting Started

1. To register, go to theStart menu, underAll Programs, SeisImagerto find the SeisImager Registry .If you are using the software on a trial basis, skip to Step 2. Open the registry and email the keyword shownto seismicsales@geometrics.com orsupport@geometrics.comand we will reply with a registration password toenable the version of the software you have purchased. Typically, upgrading does not require re-registration, butif you are upgrading from a version older than December 2006, you will need to re-register. Once registered, theprogram modules can be opened directly through the desktop icons shown below or through the links in theSeisImager Start menu folder.

SeisImager/2D consists of the Pickwin and Plotrefa modules. SeisImager/SW-1D consists of the Pickwin andWaveEq modules. SeisImager/SW-2D consists of the Pickwin, WaveEq, and GeoPlot modules. The SurfaceWave Analysis Wizard is not a separate module but automatically calls on specific functions from Pickwin,WaveEq, and GeoPlot to walk you through the analysis process. All of the icons will be shown regardless ofwhich program you have purchased.

2. Double click on the module icons for the program you have purchased or are using on a trial basis, starting withPickwin. If you have installed for the first time, a prompt will ask you to choose English orJapanese, chooseEnglish. To register the language selection, the modules must be closed and reopened. If you are using the

software on a trial basis, after selecting the language you will be presented with registration dialog boxes. Leavethe password fields empty and click OK, OK. Then close and reopen the modules to register the languageselection. The language selection must be registered for each module and must be registered beforeusing the Surface Wave Analysis Wizard.

3. Refer to the SeisImager manuals on how to start your data analysis.

3.0 Help Contacts

If you need assistance, please contact the Seismic Sales or Customer Service Departments at Geometrics, Inc. viaseismicsales@geometrics.com orsupport@geometrics.com, telephone 408-954-0922, or facsimile 408-954-0902.