REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD ...
Transcript of REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD ...
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 1 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
Permanent Facility
1 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Antenna coaxial sockets- Endurance test
IEC 60065: 2014 IS 616:2017 (Clause12.5)
2 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus Bump Test IEC 60065: 2014 IS 616:2017 (Clause
12.1.2)
3 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Constructionalrequirements with regardto the protection againstelectric shock - ForceTest
IEC 60065: 2014 IS 616:2017 (Clause8.12, 8.13)
4 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Electrical shock hazardunder normal operatingcondition – Resistance toexternal forces
IEC 60065: 2014 IS 616:2017 (Clause9.1.7)
5 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Electrical Shock hazardunder normal operatingconditions -Determination ofaccessible parts
IEC 60065: 2014 IS 616:2017 (Clause9.1.1.3)
6 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus Fault Conditions IEC 60065: 2014 IS 616:2017 (Clause
4.3)
7 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Terminals for externalflexible cords and forpermanent connection tothe mains supply
IEC 60065: 2014 IS 616:2017 (Clause15.3.5, 15.3.6,15.3.7)
8 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Wall or ceiling mountedequipment
IEC 60065: 2014 IS 616:2017 (Clause19.7)
9 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No: 10.2 - Surge
test IEC 60065
10 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No: 10.2 - Surge
Test IS 616
11 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No: 12.7.3.6 -
Crush Test IS 616
12 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No: 8.21 -
Mandrel Test IEC 60065
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 2 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
13 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No:12.7.3.6 -
Crush Test IEC 60065
14 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment
Clause No:15.4 - Devicesforming a part of mainsplug
IEC 60065
15 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment
Clause No:15.4 - Devicesforming a part of mainsplug
IS 616
16 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No:8.21 - Mandrel
Test IS 616
17 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Antenna Coaxial socket –Impact test
IEC 60065: 2014 IS 616:2017 (Clause12.5)
18 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Antenna Coaxial socket –Torque test
IEC 60065: 2014 IS 616:2017 (Clause12.5)
19 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus Clearances IEC 60065: 2014 IS 616:2017
(Clause13.1, 13.2)
20 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Clearances and creepageDistances -Determination of workingvoltages
IEC 60065: 2014 IS 616:2017(Clause13.1, 13.2)
21 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Constructionalrequirements with regardto the protection againstelectric shock
IEC 60065: 2014 IS 616:2017 (Clause8.1,8.7,8.15, 8.16, 8.18,8.19,8.20)
22 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Constructionalrequirements with regardto the protection againstelectric shock - Test oninsulating material
IEC 60065: 2014 IS 616:2017 (Clause8.3)
23 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus Creepage Distances IEC 60065: 2014 IS 616:2017
(Clause13.4)
24 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus Drop Test IEC 60065: 2014 IS 616:2017 (Clause
12.1.5, 12.7.3.4)
25 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Electrical connectionsand mechanical fixings
IEC 60065: 2014 IS 616:2017 (Clause17)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 3 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
26 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Electrical shock hazardunder normal operatingcondition – Openings ofthe enclosure
IEC 60065: 2014 IS 616:2017 (Clause9.1.3)
27 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Electrical shock hazardunder normal operatingcondition – Pre-setconditions
IEC 60065: 2014 IS 616:2017 (Clause9.1.4)
28 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Electrical shock hazardunder normal operatingcondition – Terminals
IEC 60065: 2014 IS 616:2017 (Clause9.1.4)
29 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Electrical shock hazardunder normal operatingcondition – Withdrawal ofMAINS plug
IEC 60065: 2014 IS 616:2017 (Clause9.1.6)
30 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Electrical Shock hazardunder normal operatingconditions -Determination ofhazardous live parts
IEC 60065: 2014 IS 616:2017 (Clause9.1.1.1, 9.1.1.2, 9.1.2, 9.2)
31 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus External flexible cords IEC 60065: 2014 IS 616:2017 (Clause
16.2)
32 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus External flexible cords IEC 60065: 2014 IS 616:2017 (Clause
16.4)
33 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Fault Condition - ElectricShock Hazard
IEC 60065: 2014 IS 616:2017 (Clause11.1)
34 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Heating under normaloperating conditions IEC 60065: 2014 IS 616:2017 (Clause 7)
35 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus Humidity Treatment IEC 60065: 2014 IS 616:2017 (Clause
10.3)
36 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus Impact Test IEC 60065: 2014 IS 616:2017 (Clause
12.1.4, 12.7.3.5)
37 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Insulation resistance andDielectric strength test
IEC 60065: 2014 IS 616:2017 (Clause10.4)
38 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Marking and Instructions- General requirements
IEC 60065: 2014 IS 616:2017 (Clause5.1)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 4 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
39 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Marking and Instructions- Identification andsupply ratings
IEC 60065: 2014 IS 616:2017 (Clause5.2 (g) & (h))
40 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Measurement ofTransient Voltages
IEC 60065: 2014 IS 616:2017(Clause13.3.4)
41 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Provision for protectiveearthing
IEC 60065: 2014 IS 616:2017 (Clause15.2)
42 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus Push pull tests
IEC 60065: 2014 IS 616:2017 (Clause12.2, 12.4, 12.6.2,15.3.2, 17.9, 19.3,19.7)
43 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Stability and Mechanicalhazards - Test at 100 tohorizontal
IEC 60065: 2014 IS 616:2017 (Clause19.1,19.2)
44 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Stability and Mechanicalhazards - Vertical Forcetest & Horizontal test
IEC 60065: 2014 IS 616:2017 (Clause19.3, 19.4)
45 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus Stress Relief Test IEC 60065: 2014 IS 616:2017 (Clause
12.1.6, 12.7.3.2)
46 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronic apparatus
Telescoping or rodantennas
IEC 60065: 2014 IS 616:2017 (Clause12.6.1, 12.6.2)
47 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and similarelectronics apparatus Fault condition- Heating IEC 60065: 2015, IS 616: 2017 (Clause
7)
48 ELECTRONICS- AUDIOEQUIPMENT
Audio, Video and Similarelectronics apparatus
Heating under normaloperating conditions IEC 60065: 2014, IS 616:2017 (Clause 7)
49ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 1stcharacteristic numeralIP1X
IEC 60529, IEC 60950- 22: 2013
50ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 1stcharacteristic numeralIP2X
IEC 60529, IEC 60950- 22: 2013
51ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 1stcharacteristic numeralIP3X
IEC 60529, IEC 60950- 22: 2013
52ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 1stcharacteristic numeralIP4X
IEC 60529, IEC 60950- 22: 2013
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 5 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
53ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 1stcharacteristic numeralIP5X
IEC 60529, IEC 60950- 22: 2013, QM333, JSS 55555
54ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 1stcharacteristic numeralIP6X
IEC 60529, IEC 60950- 22: 2013, QM333, JSS 55555
55ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 2ndcharacteristic numeralIPX1
IEC 60529, IEC 60950- 22: 2013
56ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 2ndcharacteristic numeralIPX2
IEC 60529, IEC 60950- 22: 2013
57ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 2ndcharacteristic numeralIPX3
IEC 60529, IEC 60950- 22: 2013
58ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 2ndcharacteristic numeralIPX4
IEC 60529, IEC 60950- 22: 2013
59ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 2ndcharacteristic numeralIPX5
IEC 60529, IEC 60950- 22: 2013
60ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 2ndcharacteristic numeralIPX6
IEC 60529, IEC 60950- 22: 2013
61ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Ingress Protection, 2ndcharacteristic numeralIPX7
IEC 60529, IEC 60950- 22: 2013
62ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Damp heat cyclicIEC 60068-2-30:2001, IS 9000 (Part5/Sec 1&2) - 1981 (RA2016), QM 333Issue-2:2010 Test No.: 3 JSS55555:2000 Revision 2 Test 27
63ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electrical, Electronicsand Electro-mechanicalSub - Assemblies
Damp Heat steady stateIEC 60068-2-78:2001 IS 9000 (Part4):2008 (RA2018), QM 333 Issue-2:2010Test No.:5 JSS 55555:2000 Revision 2Test 10
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 6 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
64ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electronic & Electricalequipments, Sub-assemblies
Change of temperature
IEC 60068-2-14:2009 CL.4,5,6,7,8 IS9000 (Part 14/Sec 1 to 3):1988(RA2018), QM 333 Issue-2:2010 TestNo.4, JSS 55555:2000 Revision 2 Test22: 2016
65ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electronic & Electricalequipments, Sub-assemblies
Cold (Low Temperature)IEC 60068-2-1:2007, IS 9000 (Part 2/Sec1 to 4):1977 (RA2016), QM 333Issue-2:2010 Test No.:1, JSS55555:2000 Revision 2 Test 20
66ELECTRONICS-ENVIRONMENTAL TESTFACILITY
Electronic & Electricalequipments, Sub-assemblies
Dry Heat (HighTemperature)
IEC 60068-2-2:2007, IS 9000 (Part 3/Sec1 to 5):1977 (RA2016) QM 333Issue-2:2010 Test No.:2, JSS55555:2000 Revision 2 Test 17
67 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Electric strength
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Clause 5.2,2.1.1.6,2.3.2,2.3.4, 2.10.5,3.1.4,6.1.2,6.2.2.2
68 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Impact Test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.2.5/
69 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Inspection of AdjustableControls
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.3.3/
70 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Touch current andprotective conductorcurrent
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 5.1/
71 ELECTRONICS- ITEQUIPMENT
Information Technologyequipment
Limited current circuitsmeasurement test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.4/
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 7 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
72 ELECTRONICS- ITEQUIPMENT
Information Technologyequipment
Test for operatingvoltages generatedexternally
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.3.5/
73 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Abnormal operating andfault conditions
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.5.3/
74 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Abnormal operating andfault conditions
IS 13252 Part 1: 2010 A 1: 2013 + A 2:2015/ UL 60950-1:2017/ CSA C22.c No.60950-1-07/ IEC 60950-1:2005 &A1:2009 + A2:2013/ Cl. No. 5.3/:
75 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Access to ELV wiring
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.1.1.3/..
76 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Access to energizedparts
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 2.1.1.1,2.8.2, 2.8.3, 4.2/
77 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
b. Transients fromTelecommunicationnetwork
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.no.2.10.3.9/
78 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Clearances
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.10.3/
79 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Creepage and clearancemeasurement forSecuring of parts
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.3.4/
80 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Creepage distances
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.10.4/
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 8 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
81 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Determination of workingvoltage
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.10.2/
82 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Discharge of capacitorsin equipments
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.1.1.7/
83 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Drop test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.2.6/
84 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Energy hazardmeasurement test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause2.1.1.5,2.1.1.8, 2.1.2,2.1.3/
85 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Force test for Handlesand manual control
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.3.2/
86 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Force test for Wall orceiling mountedequipment
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.2.10/
87 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Humidity conditioning
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.9.2/
88 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Inspection of Edges andcorners
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.3.1/
89 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Insulation betweenprimary circuits andcable distributionsystems (Voltage surgetest)
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.7.4/
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 9 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
90 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Limited power sourcesmeasurement test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.5/
91 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Measurement ofTransient Voltages (a.Transients from Mainssupply)
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no. 2.10.3.9/
92 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Openings in enclosures
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 4.6/
93 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Protection againsthazardous moving parts
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.no.4.4
94 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Protection fromhazardous voltages
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.6.1.1/
95 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Protection of equipmentusers from overvoltageson telecommunicationnetworks
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 6.2.2.1/
96 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Protection requirementsfor safety interlocks
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no. 2.8.1, 2.8.2,2.8.3/
97 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Protective earthingconductors andprotective bondingconductors
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no. 2.6.3.1,2.6.3.2, 2.6.3.3,2.6.3.4, 2.6.3.5/
98 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Resistance to abnormalheat
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Clause.4.5.5
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 10 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
99 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
SELV Circuitsmeasurement test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 2.2.2, 2.2.3,2.2.4/
100 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Stability
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.1/
101 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Steady force test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no. 4.2.1, 4.2.2,4.2.2, 4.2.3, 4.2.4/
102 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Stress relief test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clno.4.2.7/
103 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Thermal requirements
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950- 1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Clause 4.5.1, 4.5.2,4.5.3, 4.5.4/:
104 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments Thermal requirements
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Clause 4.5.1, 4.5.2,4.5.3, 4.5.4/
105 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
TNV circuits limitsmeasurement test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.2.3.1/
106 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Torque test for Directplug-in equipment
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.3.6/
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 11 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
107 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Visual Inspection andData evaluation forBatteries
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.no.4.3.8,
108 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Visual Inspection andData evaluation for Oiland grease
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.no.4.3.9/
109 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Visual Inspection ofConnection by plugs andsockets
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.3.5/
110 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Visual Inspection ofHeating elements inearthed equipments
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.3.7/
111 ELECTRONICS- ITEQUIPMENT
Information Technologyequipments
Wiring, connections andsupplies: Cord anchorageand dimensionmeasurement
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.3/
112 ELECTRONICS- ITEQUIPMENT IT Equipment Input current
Measurement Test
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.1.6.2/
113 ELECTRONICS- ITEQUIPMENT IT Equipment Verification of Durability
of Markings
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013
114 ELECTRONICS- ITEQUIPMENT IT Equipment Verification of Marking
and Instructions
IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.1.7.2/
115 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Construction Details -Openings
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 7.4.2)
116 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Limited Current circuits IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 5.2.3) (Clause 2.4/RD)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 12 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
117 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
(Cl.: 7, 7.2) - Protectionagainst electric shock &Energy Hazard
IS 16221 (Part 2):2015/ IEC 62109-2:2011(Cl.:7) IS 16221 (Part 1):2016/ IEC62109-1 Ed. 1.0 2010-04, (Cl.:7.2)
118 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl 4.4 - Testing in singlefault condition
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.4
119 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 4.4.4.15.2.2 - Fault-Tolerance of AutomaticDisconnecting Means
IS 16221(Part 2):2015 IEC 62109-2:2011 (Cl. 4.4.4.15.2.2)
120 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 4.4.4.15.2.3 -Automatic Checking ofthe Disconnect Means
IS 16221(Part 2):2015 IEC 62109-2:2011(Cl. 4.4.4.15.2.3)
121 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 4.4.4.16 - Standaloneinverters - load transfertests
IS 16221(Part 2):2015 IEC 62109-2:2011 (Cl. 4.4.4.16)
122 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 4.4.4.17 - Coolingsystem failure -Blanketing test
IS 16221(Part 2):2015 IEC 62109-2:2011 (Cl. 4.4.4.17)
123 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 4.7.4 - Stand-aloneInverter AC outputvoltage and frequency
IS 16221(Part 2):2015 IEC 62109-2:2011
124 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 4.7.5 - Stand-aloneInverter output voltagewaveform
IS 16221(Part 2):2015 IEC 62109-2:2011
125 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 4.8.2.1 - Arrayinsulation resistancedetection for invertersfor ungrounded arrays
IS 16221(Part 2):2015 IEC 62109-2:2011
126 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 4.8.3.2 - 30 mA touchcurrent type test forisolated inverters
IS 16221(Part 2):2015 IEC 62109-2:2011
127 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 4.8.3.5 - Protection Byapplication of RCD’s
IS 16221(Part 2):2015 IEC 62109-2:2011
128 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 5 - Marking andDocumentation
IS 16221(Part 2):2015 IEC 62109-2:2011
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 13 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
129 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 5.1.2 - Durability ofmarkings
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.2
130 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 5.1.3 - Identification IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.3
131 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 5.1.4 - Equipment’sRatings
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.4
132 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.3.6.2 - InsulationBetween Live Parts andAccessible ConductiveParts
IS 16221(Part 1):2016 IEC 62109-1:2010
133 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.3.6.3 - ProtectiveClass I - Protectivebonding and earthing
IS 16221(Part 1):2016 IEC 62109-1:2010
134 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.3.6.3.7 - ExternalProtective EarthingConductor
IS 16221(Part 1):2016 IEC 62109-1:2010
135 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.3.7 - InsulationIncluding Clearance andCreepage distances
IS 16221(Part 1):2016 IEC 62109-1:2010
136 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.3.7.4 - ClearanceDistances
IS 16221(Part 1):2016 IEC 62109-1:2010
137 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.3.7.5 - CreepageDistances
IS 16221(Part 1):2016 IEC 62109-1:2010
138 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.3.7.8.2 -Requirements forElectrical WithstandCapability of SolidInsulation
IS 16221(Part 1):2016 IEC 62109-1:2010
139 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.3.8 - ResidualCurrent Detection (RCD)or Monitoring (RCM)device compatibility
IS 16221(Part 1):2016 IEC 62109-1:2010
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 14 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
140 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.3.9 - Protectionagainst shock hazarddue to stored energy
IS 16221(Part 1):2016 IEC 62109-1:2010
141 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.4 - Protectionagainst energy hazards
IS 16221(Part 1):2016 IEC 62109-1:2010
142 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.5.1- ImpulseVoltage Test
IS 16221(Part 1):2016 IEC 62109-1:2010
143 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.5.2 - Voltage Test IS 16221(Part 1):2016 IEC 62109-1:2010
144 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.5.3 - PartialDischarge test
IS 16221(Part 1):2016 IEC 62109-1:2010
145 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.5.4 - Touch currentmeasurement
IS 16221(Part 1):2016 IEC 62109-1:2010
146 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 7.5.5 - Equipment’swith multiple sources ofsupply
IS 16221(Part 1):2016 IEC 62109-1:2010
147 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 8.2 - Moving Parts IS 16221(Part 1):2016 IEC 62109-1:2010
148 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 8.3 - Stability IS 16221(Part 1):2016 IEC 62109-1:2010
149 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 8.4 - Provisions fortilting and carrying
IS 16221(Part 1):2016 IEC 62109-1:2010
150 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 8.5 - Wall Mounting IS 16221(Part 1):2016 IEC 62109-1:2010 Cl. 8.5
151 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 8.6 - Expelled Parts IS 16221(Part 1):2016 IEC 62109-1:2010
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 15 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
152 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl. 9.1.1, 9.1.2, 9.1.3 -Protection against fire
IS 16221(Part 1):2016 IEC 62109-1:2010
153 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.:11 & 12 - Protectionagainst liquid hazards &Chemical Hazards
IS 16221 (Part 2):2015/ IEC 62109-2:2011
154 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.:13 - Physicalrequirement
IS 16221 (Part 2):2015/ IEC 62109-2:2011 (Cl.:13) IS 16221 (Part 1):2016/IEC 62109-1 Ed. 1.0 2010-04, (Cl.:13.1,13.2,13.3,13.4,13.5,13.6,13.7,13.8)
155 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.:8 - Protection againstmechanical hazards
IS 16221 (Part 2):2015/ IEC 62109-2:2011
156 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.:9 - Protection againstFire Hazards
IS 16221 (Part 2):2015/ IEC 62109-2:2011
157 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.11 - Protection againstliquid hazards
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.11
158 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.12 - Chemical Hazard IS 16221(Part 1):2016 IEC 62109-1:2010
159 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.1 - Handles andManual controls
IS 16221(Part 1):2016 IEC 62109-1:2010
160 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.2 - Securing ofparts
IS 16221(Part 1):2016 IEC 62109-1:2010
161 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.3.2 - Connection toan a.c mains supply
IS 16221(Part 1):2016 IEC 62109-1:2010
162 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.3.2.5 - Cordanchorages and strainrelief
IS 16221(Part 1):2016 IEC 62109-1:2010
163 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.3.3 - Wiringterminals for connectionof external conductors
IS 16221(Part 1):2016 IEC 62109-1:2010
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 16 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
164 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.3.4 - Supply wiringspace
IS 16221(Part 1):2016 IEC 62109-1:2010
165 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.3.6 - Disconnectionfrom supply sources
IS 16221(Part 1):2016 IEC 62109-1:2010
166 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.3.7 - Connectors,Plugs and Sockets
IS 16221(Part 1):2016 IEC 62109-1:2010
167 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.3.8 - Direct plug-inequipment
IS 16221(Part 1):2016 IEC 62109-1:2010
168 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.4 - Internal wiringand connections
IS 16221(Part 1):2016 IEC 62109-1:2010
169 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.5 - Openings inenclosure
IS 16221(Part 1):2016 IEC 62109-1:2010
170 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.6.2.1 - Stress reliefTest
IS 16221(Part 1):2016 IEC 62109-1:2010
171 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.7 - Mechanicalresistance to deflection,impact, or drop
IS 16221(Part 1):2016 IEC 62109-1:2010
172 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.13.8 - Thicknessrequirement for metalenclosures
IS 16221(Part 1):2016 IEC 62109-1:2010
173 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.4.3 - Thermal Testing IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.3
174 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.4.5 - Humiditypreconditioning
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.5
175 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.4.6 - Back-feedvoltage protection
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.6
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 17 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
176 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.4.7 - Electrical ratingstests
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.7
177 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.5 - Marking andDocumentation
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5
178 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.5.1.5 - FuseIdentification
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.5
179 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.5.1.6 - Terminals,Connections and controls
IS 16221(Part 1):2016 IEC 62109-1:2010
180 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.5.1.7 - Switches andCircuit breakers
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.7
181 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.5.1.8 - Class IIEquipment
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.8
182 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.5.1.9 - Terminal boxesfor external connections
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.9
183 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.5.2 - WarningMarkings
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.2
184 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.5.3 - Documentation IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.3
185 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.6, 6.1, 6.2, 6.3 -EnvironmentalCategories and minimumenvironmental conditions
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.6, 6.1, 6.2, 6.3
186 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.6, 6.1, 6.2, 6.3 -EnvironmentalCategories and minimumenvironmental conditions
IS 16221(Part 2):2015 IEC 62109-2:2011
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 18 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
187 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.7.2 - Protectionagainst Electric Shockand Energy Hazards -Fault conditions
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.7.2
188 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.7.3.2.6 - Protectionagainst Electric Shockand Energy Hazards -Working voltage andDVC
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.7.3.2.6
189 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.7.3.4.2.3 - Protectionagainst Electric Shockand Energy Hazards -Access Probe tests
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.7.3.4.2.3
190 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.7.3.4.2.4 - Protectionagainst Electric Shockand Energy Hazards -Service access areas
IS 16221(Part 1):2016 IEC 62109-1:2010
191 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.7.3.4.3 - Protection bymeans of Insulation oflive parts
IS 16221(Part 1):2016 IEC 62109-1:2010
192 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.7.3.5.3.1 - Limitationof Current ThroughProtective Impedance
IS 16221(Part 1):2016 IEC 62109-1:2010
193 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.7.3.5.3.2 - Limitationof discharging energythrough protectiveimpedance
IS 16221(Part 1):2016 IEC 62109-1:2010
194 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.9.1.4 - Openings inenclosure
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.9.1.4
195 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.9.2 - Limited PowerSources
IS 16221(Part 1):2016 IEC 62109-1:2010
196 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Power converters for usein Photovoltaic PowerSystems
Cl.9.3 - Short-Circuit andovercurrent protection
IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.9.3
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 19 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
197 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Capacity Test BEE schedule 17: 2016/ IS 13314
198 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Cl.7.11 - Total HarmonicDistortion BEE schedule 17: 2016/ IS 13314
199 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Cl.7.6 - High Voltage Test BEE schedule 17: 2016/ IS 13314
200 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Cl.7.7 - Insulationresistance Test BEE schedule 17: 2016/ IS 13314
201 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Cl.7.8,7.8.1,7.8.2 - No-Load test BEE schedule 17: 2016/ IS 13314
202 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Cl.7.9.3 - Efficiency BEE schedule 17: 2016/ IS 13314
203 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Power Factor BEE schedule 17: 2016/ IS 13314
204 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Abnormal operating andfault conditions
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 8.3) (Clause 5.3/RD)
205 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
AC and d.c. powerisolation
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.4) (Clause 3.4/RD)
206 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Backfeed Protection IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 5.1.4 and Annex I)
207 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Battery
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 4.7.20) (Clause2.1.1.5/RD)
208 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Case insulation IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 7.6.4)
209 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Clearances, creepagedistances and distancesthrough insulation
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.7) (Clause 2.10/RD)
210 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Connection to Power -General provisions forconnection to power
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 6.2.1) (Clause 3.2/RD)
211 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Connection totelecommunicationnetworks
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 9) (Clause 6/RD,3.5/RD)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 20 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
212 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Durability of markings
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 4.7.16) (Clause1.7.11/RD)
213 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Equipment movement IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 7.4.4)
214 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) External Signaling Circuit IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 5.2.4) (Clause 3.5/RD)
215 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
General provisions forearth leakage
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 8.1) (Clause 5.1.1/RD)
216 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) High Leakage Current
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 4.7.13) (Clause4.7.13/RD)
217 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Limited Power sources IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 5.2.5) (Clause 2.5/RD)
218 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Mechanical Strength IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 7.3) (Clause 4.2/RD)
219 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Over current and earthfault protection
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.5) (Clause 2.7/RD)
220 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Power Interfaces IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 4.6) (Clause 1.6.2/RD)
221 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Protection for UPSintended to be used inoperator access areas
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.1.1) (Clause 2.1.1/RD)
222 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Protection for UPSintended to be used inrestricted access areas
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.1.3) (Clause2.1.1.5/RD)
223 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Protection for UPSintended to be used inservice access areas
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.1.2) (Clause2.1.1.5/RD)
224 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Protective bonding IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 5.3.3) (Clause 2.6/RD)
225 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Protective earthing IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 5.3.2) (Clause 2.6/RD)
226 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Protective earthing andprotective bonding
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.3.1) (Clause 2.5/RD)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 21 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
227 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Resistance to fire IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 7.5) (Clause 4.7/RD)
228 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Safety extra low voltagecircuits - SELV
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.2.1) (Clause 2.2/RD)
229 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Stability IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 7.2) (Clause 4.1/RD)
230 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Telephone networkvoltage circuits - TNV
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.2.2) (Clause 2.3/RD)
231 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS) Temperature rise IEC 62040-1: 2008 IS 16242(Part
1):2014 (Clause 7.7) (Clause 4.5/RD)
232 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Verification of Markingsand Instructions
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 4.7)
233 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Uninterruptible PowerSystems (UPS)
Wiring terminals forexternal powerconductors
IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 6.3) (Clause 3.2/RD)
234 ELECTRONICS- POWERSUPPLIES & STABILIZERS UPS / INVERTER
Clause No:5.6 -Protection of Personnel -Safety Interlocks
IS 16242 (Part 1)
235 ELECTRONICS- POWERSUPPLIES & STABILIZERS UPS / INVERTERS
Clause No:5.6 -Protection of Personnel -Safety Interlocks
IEC 62040-1
236 ELECTRONICS- POWERSUPPLIES & STABILIZERS UPS / INVERTERS Clause No:8.2 - Electric
strength IEC 62040-1
237 ELECTRONICS- POWERSUPPLIES & STABILIZERS UPS / Inverters Clause No:8.2 - Electric
strength IS 16242(Part 1)
238 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Utility-InterconnectedPhotovoltaic Inverters
Clause 6 -Test for Singleor Multi-Phase Inverter
IS 16169:2014 (Clause. 6) IEC62116:2014 (Clause. 6)
239 ELECTRONICS- POWERSUPPLIES & STABILIZERS
Utility-InterconnectedPhotovoltaic Inverters
Clause 7 -Documentation
IS 16169:2014 (Clause. 7) IEC62116:2014 (Clause. 7)
240 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.2) - EnergySource Classifications IEC 62368-1 (ed 3:2018) (Clause 4.2)
241 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.4.3.2, AnnexT3, T5) - Steady forcetests
IEC 62368-1 (ed 3:2018
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 22 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
242 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.4.3.3, AnnexT7) - Drop Tests IEC 62368-1 (ed 3:2018)
243 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.4.3.4, AnnexT6) - Impact test IEC 62368-1 (ed 3:2018)
244 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.4.3.6, AnnexT9) - Glass Impact Test IEC 62368-1 Ed 3:2018
245 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.4.3.7, AnnexT9) - Glass fixation test IEC 62368-1 ed 3:2018
246 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.4.3.8, AnnexT8) - Thermoplasticmaterial test
IEC 62368-1 ed 3:2018
247 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.4.3.9, Annex T)- Air comprising asafeguard
IEC 62368-1 ed 3:2018
248 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.4.5, Annex K) -Safety Interlocks IEC 62368-1 ed 3:2018
249 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.6) - Fixing ofConductors IEC 62368-1 (ed 3:2018)
250 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.7) - Equipmentfor direct insertion in tomains socket-outlets
IEC 62368-1 (ed 3:2018)
251 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.8.4.6) - Crushtest IEC 62368-1(ed 3:2018)
252 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 4.8.5) -Compliance criteria(Force test)
IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 23 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
253 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.10.1) -Safeguards againsttransient voltages fromexternal circuits(Requirements)
IEC 62368-1 (ed 3:2018)
254 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.10.2.2) -Impulse test IEC 62368-1 (ed 3:2018)
255 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.10.2.3) -Steady-state test(electric strength test)
IEC 62368-1 (ed 3:2018)
256 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.10.3) -Compliance criteria (IRtester)
IEC 62368-1 (ed 3:2018)
257 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.4.5) -Insulating compoundforming cemented joints
IEC 62368-1 (ed 3:2018)
258 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.4.6.1,5.4.4.6.2, 5.4.4.6.3,5.4.4.6.4 ) - Thin sheetmaterial
IEC 62368-1 (ed 3:2018)
259 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.4.6.5) -Mandrel test IEC 62368-1 (ed 3:2018)
260 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.4.7) -Solidinsulation in woundcomponents
IEC 62368-1 (ed 3:2018)
261 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.4.8) -Compliance criteria IEC 62368-1 (ed 3:2018)
262 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.5.2) -Antenna TerminalInsulation- Test Method
IEC 62368-1 (ed 3:2018)
263 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.6) -Insulation of internal wire IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 24 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
264 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.4.8) - Humidityconditioning IEC 62368-1 (ed 3:2018)
265 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.5) -Components assafeguard
IEC 62368-1 (ed 3:2018)
266 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.6.3) -Requirements forProtective earthingconductors
IEC 62368-1 (ed 3:2018)
267 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.6.5) -Terminals for protectiveconductors
IEC 62368-1 (ed 3:2018)
268 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.6.6) -Resistance of theProtective BondingSystem (Earth bond test)
IEC 62368-1 (ed 3:2018)
269 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 5.6.7) - Reliableconnection of aprotective earthingconductor
IEC 62368-1 (ed 3:2018)
270 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(Clause 8.12 & AnnexT.11) - Telescoping orrod antennas
IEC 62368-1 (ed 3:2018)
271 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(clause no. 4.8.4.2) -Stress relief test IEC 62368-1 (ed 3:2018)
272 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(clause no. 4.8.4.3) -Battery replacement test IEC 62368-1 (ed 3:2018)
273 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(clause no. 4.8.4.4) -Drop test IEC 62368-1 (ed 3:2018)
274 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
(clause no. 4.8.4.5) -Impact test IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 25 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
275 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex F - Equipmentmarkings, instructions,and instructionalsafeguards
IEC 62368-1 (ed 3:2018
276 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex B.2.5 - Input test IEC 62368-1 (ed 3:2018)
277 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex B.3 - Simulatedabnormal operatingconditions
IEC 62368-1 (ed 3:2018)
278 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex B.4 -Simulatedsingle fault conditions IEC 62368-1 (ed 3:2018)
279 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex D - Test Generator IEC 62368-1 (ed 3:2018)
280 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex G.5.3 -Transformers IEC 62368-1 (ed 3:2018)
281 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex G.5.4 - Motors IEC 62368-1 (ed 3:2018)
282 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex G.7.2 - Mainsupply cords (Crosssectional area)
IEC 62368-1 (ed 3:2018)
283 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex G.7.3 - Cordanchorages and strainrelief for non detachablepower supply cords
IEC 62368-1 (ed 3:2018)
284 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex G.7.4 - Cord entry IEC 62368-1 (ed 3:2018)
285 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex G.7.5 - Non-detachable cord bendprotection
IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 26 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
286 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex G.7.6.1 - Supplywiring spaces IEC 62368-1 (ed 3:2018)
287 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex H - Criteria fortelephone ringing signals(TNV circuit test)
IEC 62368-1 (ed 3:2018)
288 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex K -Safetyinterlocks IEC 62368-1 (ed 3:2018)
289 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex L - Disconnectdevices IEC 62368-1 (ed 3:2018)
290 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex P - Safeguardsagainst conductiveobjects
IEC 62368-1 (ed 3:2018)
291 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex Q - Circuitsintended forinterconnection withbuilding wiring
IEC 62368-1 (ed 3:2018)
292 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex T.1,T.2,T.3,T.4&T5 - Mechanicalstrength tests
IEC 62368-1 (ed 3:2018)
293 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex T.10 - Glassfragmentation test IEC 62368-1 (ed 3:2018)
294 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex T.6 & T.9 -Enclosure impact test IEC 62368-1 (ed 3:2018)
295 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex T.7 - Drop test IEC 62368-1 (ed 3:2018)
296 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex T.8 - Stress relieftest IEC 62368-1 (ed 3:2018)
297 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Annex V - Determinationof accessible parts IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 27 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
298 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause - 8.5.4: SpecialCategories of equipmentcontaining moving parts
IEC 62368-1
299 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 4.1.3 - Equipmentdesign and construction IEC 62368-1 ed 3:2018
300 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 4.3 - ProtectionAgainst Energy Sources IEC 62368-1 (ed 3:2018)
301 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 4.4.3.10, AnnexT10 - Compliance criteria IEC 62368-1 ed 3:2018
302 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 4.4.3.5, Annex T3- Internal accessiblesafeguard test
IEC 62368-1 ed 3:2018
303 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 4.5, Annex M -Explosion IEC 62368-1 ed 3:2018
304 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.3.2.1 -Accessibility to electricalenergy sources andsafeguards-Requirements
IEC 62368-1 (ed 3:2018)
305 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.3.2.2 - Contactrequirements IEC 62368-1 (ed 3:2018)
306 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.3.2.3 -Compliance criteria IEC 62368-1 (ed 3:2018)
307 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.3.2.4 -Terminals for connectingstripped wire
IEC 62368-1 (ed 3:2018)
308 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.1.10.3 - Ballpressure test IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 28 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
309 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.1.3 -Compliance criteria(humidity treatment)
IEC 62368-1 (ed 3:2018)
310 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.1.4 -Maximum operatingtemperature(Temperaturemeasurement)
IEC 62368-1 (ed 3:2018)
311 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.1.6 -Insulation intransformers withvarying dimensions
IEC 62368-1 (ed 3:2018)
312 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.1.7 -Insulation in circuitsgenerating startingpulses
IEC 62368-1 (ed 3:2018)
313 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.1.8 -Determination of workingvoltage
IEC 62368-1 (ed 3:2018)
314 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.2, 5.4.3 -Clearance, creepage IEC 62368-1 (ed 3:2018)
315 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.4.1 - Solidinsulation – Generalrequirements
IEC 62368-1 (ed 3:2018)
316 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.4.2 - Minimumdistance throughinsulation
IEC 62368-1 (ed 3:2018)
317 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.4.3 -Insulating compoundforming solid insulation
IEC 62368-1 (ed 3:2018)
318 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.4.4 - Solidinsulation insemiconductor devices
IEC 62368-1 (ed 3:2018)
319 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.5.3 - AntennaTerminal Insulation-Compliance criteria
IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 29 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
320 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.7 - Tests forsemiconductorcomponents and forcemented joints
IEC 62368-1 (ed 3:2018)
321 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.4.9 - Electricstrength test IEC 62368-1 (ed 3:2018)
322 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.6.8 - Functionalearthing IEC 62368-1 (ed 3:2018)
323 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.7 - Prospectivetouch voltage, touchcurrent and protectiveconductor current
IEC 62368-1 (ed 3:2018)
324 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 5.8 - Backfeedsafeguard in batterybacked up supplies
IEC 62368-1 (ed 3:2018)
325 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.2.2 - Powersource circuitclassification
IEC 62368-1 (ed 3:2018)
326 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.2.3 -Classification of potentialignition source
IEC 62368-1 (ed 3:2018)
327 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.3 - Safeguardsagainst fire under normaloperating conditions andabnormal operatingconditions
IEC 62368-1 (ed 3:2018)
328 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.4.3 - Reductionof the likelihood ofignition under singlefault conditions in PS2circuits and PS3 circuits
IEC 62368-1 (ed 3:2018)
329 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.4.5 - Control offire spread in PS2 circuits IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 30 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
330 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.4.6 - Control offire spread in PS3 circuits IEC 62368-1 (ed 3:2018)
331 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.4.7 - Separationof combustible materialsfrom a PIS
IEC 62368-1 (ed 3:2018)
332 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.4.8 - Fireenclosures and firebarriers
IEC 62368-1 (ed 3:2018)
333 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.5 - Internal andexternal wiring IEC 62368-1 (ed 3:2018)
334 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 6.6 - Safeguardsagainst fire due to theconnection of additionalequipment
IEC 62368-1 (ed 3:2018)
335 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 7 - Injury causedby hazardous substances IEC 62368-1 (ed 3:2018)
336 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.10.3 - Cart,stand or carrier loadingtest
IEC 62368-1 (ed 3:2018)
337 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.10.4 - Cart,stand or carrier impacttest
IEC 62368-1 (ed 3:2018)
338 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.10.6 -Thermoplastictemperature stability
IEC 62368-1 (ed 3:2018)
339 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.11 - Mountingmeans for rack mountedequipment
IEC 62368-1 (ed 3:2018)
340 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.2 - Mechanicalenergy sourceclassification
IEC 62368-1 (ed 3:2018)
341 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.4 -SafeguardsAgainst Parts with SharpEdges and Corners
IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 31 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
342 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.5.3 -Compliance criteria(Safeguards Againstmoving parts)
IEC 62368-1 (ed 3:2018)
343 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.6.2 - Staticstability IEC 62368-1 (ed 3:2018)
344 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.6.3 - Relocationstability IEC 62368-1 (ed 3:2018)
345 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.6.4 - Glass sidetest IEC 62368-1 (ed 3:2018)
346 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.6.5 - Horizontalforce test IEC 62368-1 (ed 3:2018)
347 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.7 - Equipmentmounted to a wall orceiling
IEC 62368-1 (ed 3:2018)
348 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.8 - Handlestrength IEC 62368-1 (ed 3:2018)
349 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 8.9 - Wheels orcasters attachmentrequirement
IEC 62368-1 (ed 3:2018)
350 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 9.2 - Thermalenergy classification IEC 62368-1 (ed 3:2018)
351 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 9.3 - TouchTemperature limit IEC 62368-1 (ed 3:2018)
352 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause 9.6 -Requirements forwireless powertransmitters
IEC 62368-1 (ed 3:2018)
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 32 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
353 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause No. 4.10.1 -ComponentsRequirement (Disconnectdevice)
IEC 62368-1 (ed 3:2018)
354 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause No. 4.10.2 -ComponentsRequirement (Switchesand relays)
IEC 62368-1 (ed 3:2018)
355 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause No. 4.9 -Likelihood of fire orshock due to entry ofconductive object
IEC 62368-1 (ed 3:2018)
356 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause No. 5.2 -Classification and limitsof electrical energysources
IEC 62368-1 (ed 3:2018)
357 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause No. 5.4.1.9 -Insulating surfaces IEC 62368-1 (ed 3:2018)
358 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause No. 5.4.11 -Separation betweenexternal circuits andearth
IEC 62368-1 (ed 3:2018)
359 ELECTRONICS- SAFETYTESTING FACILITY
Audio/Video, Informationand CommunicationTechnology Equipment
Clause No. 5.6.4.3 -Compliance criteria(Measurement ofprotective bondingconductor)
IEC 62368-1 (ed 3:2018)
360 ELECTRONICS- SAFETYTESTING FACILITY
dio/Video, Informationand CommunicationTechnology Equipment
Clause 8.10.5 -Mechanical stability IEC 62368-1 (ed 3:2018)
361 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Annex A - Creepage andClearance distances
IEC 60215 (Edition 4):2016 Annex A IS10437:2019 Annex A
362 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Cl 5.3 - Fault conditionsTests
IEC 60215 (Edition 4):2016 Cl 5.3 IS10437:2019 Cl 5.3
363 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Cl 6.3.2 - Resistance ToHumidity
IEC 60215 (Edition 4):2016-04 Cl 6.3.2IS 10437:2019 Cl 6.3.2
Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA
Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 33 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products testedComponent, parameter or
characteristic tested / SpecificTest Performed / Tests or type of
tests performed
Test Method Specification against which tests areperformed and / or the techniques / equipment used
364 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Cl 6.3.3 - Resistance toIngress of Water
IEC 60215 (Edition 4):2016 Cl 6.3.3 IS10437:2019 Cl 6.3.3
365 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Cl 6.4 - MarkingsRelevant to Safety
IEC 60215 (Edition 4):2016 Cl 6.4 IS10437:2019 Cl 6.4
366 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Cl.7.1 - Protectionagainst Harmful electricShock and Radio -Frequency Skin burns
IEC 60215 (Edition 4):2016 Cl.7.1 IS10437:2019 Cl 7.1
367 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment Cl.7.2 - Earthing IEC 60215 (Edition 4):2016 Cl.7.2 IS
10437:2019 Cl 7.2
368 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment Cl.7.3 - Enclosures IEC 60215 (Edition 4):2016 Cl.7.3 IS
10437:2019 Cl 7.3
369 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Cl.7.4 - Mechanicalconsiderationsconcerning safetydevices
IEC 60215 (Edition 4):2016 Cl.7.4 IS10437:2019 Cl 7.4
370 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Cl.7.5 -Wiring andtermination
IEC 60215 (Edition 4):2016 Cl.7.4 IS10437:2019 Cl 7.4
371 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment Cl.7.6 - Insulation IEC 60215 (Edition 4):2016 Cl.7.6 IS
10437:2019 Cl 7.6
372 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Cl.7.7 - Voltages at theradio-frequency outputconnection
IEC 60215 (Edition 4):2016 Cl.7.7 IS10437:2019 Cl 7.7
373 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment
Cl.8.2 - HighTemperatures
IEC 60215 (Edition 4):2016 Cl.8.2 IS10437:2019 Cl8.2
374 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment Cl.8.3 - Fire IEC 60215 (Edition 4):2016 Cl.8.3 IS
10437:2019 Cl8.3
375 ELECTRONICS- SAFETYTESTING FACILITY
Radio TransmittingEquipment Cl.8.4.2 - Implosion IEC 60215 (Edition 4):2016 Cl.8.4.2 IS
10437:2019 Cl8.4.2