rcc ASSIGNMENT
Transcript of rcc ASSIGNMENT
rcc
ASSIGNMENT
For Structure Design
Engineers
An Improvement Initiative by
EZ Engineers Pvt. Ltd.Structure Design Trainings & Consultancy
Professional Courses in Structure Engineering
1. Decide whether the slab is one way or two way. Also decide the direction of main reinforcement.
2. Is the section Under Reinforced or Over Reinforced, if actual load on it is 60 KN on both faces?
3m
4m
C)
3m
7mB)A)
7m
3m
D)
4m
3m
Beam
No Support
Compression capacity = 70 KN
Tension capacity = 70 KN
3. Give an example of an Under Reinforced Section if actual moment on beam is 200 kN-m and its effective depth is 0.5m.
Professional Courses in Structure Engineering
4. Give an example of an Over Reinforced Section if actual moment on beam is 200 kN-m and its effective depth is 0.5m
5. When do we use Doubly Reinforced beam? Explain with an example.
6. Is U.R.S. / O.R.S. applicable for D.R.B.? Explain
7. Workout Stability Checks for example below. Also find pressure on all corners
1.5
m
Soil Density = 17 KN/m3
G.L
1m
Z
Z
X X2m
3m
400mm
400mm
30KN
15KN
200KN
300mm
Professional Courses in Structure Engineering
8. SBC given in soil report at 2.5m depth is 200 kN/ sq. m. Find out Net and Gross SBC.
9. Find out Active Pressure and Passive Pressure for below figure if Ka = 0.3 and Kp = 2.0. Also find out moment due to Active pressure only
2.5
m
Soil Density = 18 KN/m3
G.L
3m
G.L
G.L
0.5
m
Soil Density = 17 KN/m3
G.L
G.L
10. If above footing is supported on piles as shown below. Find out forces on piles 1, 2 and 3.
2m 2m 2m 2m
3m
3m
1m1m
1 2 3 4 5
6 7 8 9 10
Professional Courses in Structure Engineering
11. If footing fails in below conditions, what will you do? a) Overturning @ X-Xb) Overturning @ Z-Zc) Sliding in X-directiond) Pressure is greater than SBC.
Z
Z
X X LZ
LX
12. Determine the main tension reinforcement required for a rectangular beam section with the following data:• Size of beam 30x60cm• Concrete mix M 15• Characteristic strength 415 N/mm2 of
reinforcement• Factored moment 170 kNm
Professional Courses in Structure Engineering
13. Determine the main reinforcements required for a rectangular beam section with the following data:• Size of beam 30 x 60cm• Concrete mix M 15• Characteristic strength of 415 N/mm2
reinforcement• Factored moment 320 kNm
14. Determine the main reinforcement required for a slab with the following data:• Factored moment 9.60 kNm• Depth of slab 10 cm• Concrete mix M 15• Characteristic strength a) 415 N/mm2 of
reinforcement b) 250 N/mm2
15. An R.C.C. column of size 350 mm x 350 mm reinforced with 8 no. 16 mm diameter bars carries a characteristic load of 800 KN. The allowable bearing pressure on soil is 200KN/mm2. Design an isolated square pad footing. The materials are grade M 20 concrete and HYSD reinforcement of grade Fe 415 for both, the column and the footing
Professional Courses in Structure Engineering
About us
For Brochure of Professional Structure Design Courses, Click here.
To watch our Demo Training, Click here.
To understand Course Contents and details of Payment Terms, Click here.
1Advanced Steel Structure Concepts
2
3
4
5
Advanced RCC Structure Concepts
STAAD Pro with Advanced Concepts
Advanced Excel for Engineers
Expert Course in Structure Engineering
Advanced Program
Expert Program
Duration: 40 hrs
Duration: 20 hrs
Sessions: 20
Sessions: 12
Duration: 8 hrs Sessions: 4
Total Duration:
2.5 Months
Duration: 20 hrs
Sessions: 12
Duration: 45 hrs Sessions: 22
Total Duration:
2 Months
Professional Courses in Structure Engineering
Evening - 6:30 p.m. to 8:30 p.m.Morning - 10:30 a.m. to 12:30 p.m.
Saturdays - 6:30 p.m. to 8:30 p.m.Sundays - 10:30 a.m. to 12:30 p.m.
Weekdays Batches Weekend Batches
ADDITIONAL KEY FEATURES
Course Evaluationwith Assignments, Tests,
Revisions, Demo Interviews
All learning sessions are conducted by Satish Sir only
Assistant Engineers will take care of Tests, Supervision, Revisions, Assignments etc.
No Advance Payment
Job Placement Assistance after completion of
Advanced Program
Site Visits / Factory Visits Office Visits
• Linde Engineering • L&T • Bechtel• Fluor Daniel• Air Products• Jord International• Toyo Engineering• Shah & Talati• GSFC
• RA Tech Engineering• Radical Engineering• Pinkal Associates • Ashirvad Consultants• Divya Consultants• Geo Test House• CBM Engineers• Transheat Tech.• M. P Engineers, New York
• EZ Engineers Pvt. Ltd.• Avni Consultancy• KSR Design• EIEN Engineering• Zarna Associates• Aakash Shah & Assc.• Abyssal Tech.• Assc. Power Structures• Vyom Consultants
• L&T• ABB• MSU• SVIT• PIT• PIET
• Africa Electricity Board• Sri lanka Electricity Board • Chemie-Tech• GEA Engineering• Bentley • Sphere Infrastructure
• DJMIT• ITM• NTC• SVMIT• BITS
• KJIT• Charusat• ADIT• VIT• GSFC
Our Placements
Trainings at Companies & Universities
Details of Trainer Mr. Satish Jethwani - Director and Training Head• Chartered Engineer, Member of I.E.I.• Engineering - Civil (Gold Medalist) • Registered VUDA Structural Engineer
- SEOR-01-194• QPMP Level D Qualified by Certified
Project Management, Switzerland
• Worked in India, Germany, Saudi Arabia • 18 Years of Exp. in Structure Design of
Power Plants, Material Handling as well as Oil & Gas Structures
8 years at Larsen & Toubro 6 Years at Linde Engineering 6 Years of Engineering Training
Corporate Trainings
Consultancy Services
Sample Training
About us