RAVEN MAX - LINER ASSEMBLY

R . A . T . t h r u - a x l e s a r e s o l d u n d e r l i c e n c e i n t h e U K ( U K p a t e n t G B 2 4 1 4 9 7 1 B )

ATTENTION!ALWAYS REPLACE DEFAULTFRONT DERAILLUER SCREWWITH 22 mm LONG SCREW

1991160161X

DCW = 1459160021X

DCW = 3259150321X

DCW = 3259150311X

DCW = 1991160011X

DCW = 3259130011X

DCW = 3259150371X

DCW = 1459160011X

DCW = 3259160131X

DCW = 3259160021X

DCW = 3259160031X

DCW = 3259161201X

DCW = 3259161191X

DCW = 1991150064X

DCW = 3259160141X

DCW = 1254160011X

DCW = 1991160021X

DCW = 3259161052X

DCW = 1602155061X

DCW = 3259160981X

DCW = 1109160041X

6 Nm, LOCTITE

3 - 4 Nm, LOCTITE

BRAKE ASSEMBLY6 - 8 Nm

5 Nm

6 Nm, LOCTITE

3 - 4 Nm, LOCTITE

RAVEN MAX - LINER ASSEMBLY

ASSEMBLY PARTSFRAME WITH FRONT DERAILLEUR ADAPTER OPTION (2x, 3x version)

RAVEN MAX - LINER ASSEMBLY

ASSEMBLY PARTSFRAME WITHOUT FRONT DERAILLEUR ADAPTER OPTION (1x version)

DCW = 3259150321X

DCW = 3259150311X

DCW = 1991160011X

DCW = 3259130011X

DCW = 3259150371X

DCW = 1459160011X

DCW = 3259160131X

DCW = 3259161201X

DCW = 1991150064X

DCW = 3259160141X

DCW = 1254160011X

DCW = 1991160021X

DCW = 3259161051X

DCW = 1602155061X

DCW = 3259160911X

DCW = 1109160041X

6 Nm, LOCTITE

3 - 4 Nm, LOCTITE

BRAKE ASSEMBLY6 - 8 Nm

5 Nm

RD CABLESTOPDCW = 325915031

FOAM LINER (ANTI NOISE) FOR BRAKE HOSEDCW = 110916004

RD CS LINERDCW = 325915032

FD LINERDCW = 325916105

RD LINERDCW = 325916105

RAVEN MAX - LINER ASSEMBLY

FOAM LINER (ANTI NOISE) FOR BRAKE HOSEDCW = 110916004

H/T CABLE ENTRANCEDCW = SEE SEPARATE SHEET FOR OPTIONS

FD LINERDCW = 325916105

RD LINERDCW = 325916105

RAVEN MAX - LINER ASSEMBLY

H/T CABLE ENTRANCEDCW = SEE SEPARATE SHEET FOR OPTIONS

FD LINERDCW = 325916105

RD LINERDCW = 325916105

RAVEN MAX - LINER ASSEMBLY

NOTE TRUMPET SHAPE OF LINER!

RD CABLESTOPDCW = 325915031

RD CS LINERDCW = 325915032

FD LINERDCW = 325916105

RD LINERDCW = 325916105> REACH HALFWAY INTO LARGE CS LINER (325915032)

RAVEN MAX - LINER ASSEMBLY

1. RD CS LINER (DCW = 325915032)

2. RD LINER [DCW = 325916105; REACHES HALFWAY INTO RD CS LINER (DCW = 325915032)]

3. FD LINER (DCW = 325916105; ENDS IN FD GUIDE)

4. P30 SLEEVE

RAVEN MAX - LINER ASSEMBLY

RAVEN MAX: Safety advice bottom bracket sleeve

DANGER!Always use a proper bottom bracket (B/B) sleeve. Otherwise there is a high risk of serious injury or death. The sleeve should run through the B/B shell from left to right without inter-ruption. The sleeve needs to be made from stiff, strong material (e.g. original SRAM PF30 sleeve or aluminum material) to withstand the RD shift cable‘s tension. The min. outer dia-meter of the sleeve needs to be 40 mm, the maximal outer diameter of the sleeve cannot be larger than 44 mm, close to the pressfit zone (8-10 mm width). If a soft sleeve is used, there is high risk of damaging both liner and then soft sleeve and B/B axle (s. fig.).

➊

➋ ➌

➍

RAVEN MAX - LINER ASSEMBLY

H/T CABLE ENTRANCEOptions

RAVEN MAX - LINER ASSEMBLY

BRAKE HOSE NEEDS TO RUN OUTSIDE B/B SLEEVE

RAVEN MAX - LINER ASSEMBLY

PUSH FOAM HOSE ABOVE BRAKE HOSE

RAVEN MAX - LINER ASSEMBLY

WWW.FOCUS-BIKES.COM