Ratchet Head NovaTork · 2019. 3. 12. · Fittings Ratchet Head (Clockwise & Counter-Clockwise) -...
Transcript of Ratchet Head NovaTork · 2019. 3. 12. · Fittings Ratchet Head (Clockwise & Counter-Clockwise) -...
Fittings Ratchet Head (Clockwise & Counter-Clockwise) - DH
Note: Due to the product improvement, the technical parameters are subject to variation, please refer to the actual production from the factory.
NovaTorkDH Ratchet Head
for Rectangular Shank Head Torque Wrench
Shank Size A H D Weightmm mm mm mm g
DH9120 1/4” 9x12 17.5 16.2 30 90DH9125 1/4” 9x12 17.5 16.2 38 135DH92160 3/8” 9x12 17.5 21 38 160DH93160 1/2” 9x12 17.5 21 38 160DH142160 3/8” 14x18 25 21 40 265DH143420 1/2” 14x18 25 21 40 280DH144420 3/4” * 14x18 25 21 40 305DH2441200 3/4” 24x32 35 32 60 1040DH2451200 1” * 24x32 35 32 60 1140
DH2753000 1” 27x36 50 42 75 1720
* marks are special fittings,you should adjust the torque according to torque wrench manual
Square DriveItem No.
Nfusjd
Fittings Push-through Ratchet Head - DXH
Note: Due to the product improvement, the technical parameters are subject to variation, please refer to the actual production from the factory.
Shank Size A H D Weightmm mm mm mm g
DXH92160 3/8” 9x12 24.8 36.1 40 300DXH93160 1/2” 9x12 24.8 39.8 48 260DXH143420 1/2” 14x18 24.8 39.8 48 205
Square Drive
Item No.
NovaTorkDXH Push-through Ratchet Head
for Rectangular Shank Head Torque Wrench
Nfusjd
圆孔换向棘轮DR 方孔开口型OD/OYD 内V方头开口型V-OH
Fittings
Round hole A H D Weightmm mm mm mm g
DR12120 1/4” φ12 20.5 16.2 30 100DR16125 1/4” φ16 31.8 21 38 150DR162160 3/8” φ16 31.8 21 38 175DR163420 1/2” φ16 31.8 21 40 280DR2241200 3/4” φ22 56 32 60 1200DR2251200 1” φ22 56 32 60 1300
SquareDrive
Item No.
Ratchet Head (Clockwise & Counter-Clockwise) - DR
Note: Due to the product improvement, the technical parameters are subject to variation, please refer to the actual production from the factory.
NovaTorkDR Ratchet Headfor Round Holder Head Torque Wrench
Nfusjd