RAPTOR RXi DATA SHEET

A MATTER OF NATIONAL SECURITYA MATTER OF NATIONAL SECURITY

RaptoR RXiUltra-fast scanningCountersurveillanceReceiver

www.winkelmann.co.uk

data sheet

Features+ Scans 26GHz in less than 4 seconds at 3kHz resolution (approx. 100,000,000 samples per second)+ Full span spectrum analyzer display – 6GHz, 10GHz & 26GHz models available+ High resolution 15” touch screen display with multiple windows+ Sophisticated signal logging tools easily identify new signals+ Active pinpoint direction finding with “optional” probe antenna+ Full span waterfall display for analysis of signals over time+ Dedicated ultra wideband (UWB) receiver detects signals impossible to find with conventional receiver (optional)+ Rectrix software for long-term waterfall analysis + historic waveform recall (optional)+ Rostrum software delivers retrospective standalone analysis and reporting (optional)+ Remote operation by means of Ethernet+ Built-in auto switching antenna system

Applications+ Technical surveillance countermeasures (TSCM)+ Spectrum monitoring and interference mitigation+ Government sweep teams for internal and external security+ Radio monitoring and enforcement by regulatory government authorities+ Monitoring all signals from military and government bases+ Signal acquisition and analysis in a compact portable package+ In-conference and VIP monitoring

RAPTOR RXi DATA SHEET

The Raptor RXi is an ultra-fast-scanning counter-surveillance receiver for quickly detecting surveillance transmitters. The Raptor scans from 10kHz to 26GHz in under 4s, detecting even the briefest pulsed transmissions. Featuring a fast Core 2 Duo processor, its multiple software tools and demodulators detect frequency-hopping, burst mode and spread spectrum devices as well as analogue audio and video signals. Two spectrum analyser windows allow the user to simultaneously view the whole spectrum and zoom in on individual frequencies. The ‘Waterfall’ display mode gives an intuitive display of signals over time. The Raptor is designed to allow 24hr continuous monitoring of the radio spectrum to detect remote-controlled devices. Using its built-in Ethernet port, the Raptor can be operated remotely, allowing sites to be continuously monitored without the need for a site visit. Modern ultra wideband (UWB) spread spectrum devices are challenging for a conventional receiver to detect. Its optional integrated, dedicated UWB receiver allows the Raptor to detect such devices easily. The Raptor is a portable device, allowing reference scans to be easily run in different areas of a building, operating either from an internal rechargeable battery or an external supply. Its integrated antenna system provides excellent wideband performance from 10kHz to 26GHz. The Raptor can also be supplied with an external passive omni-directional antenna which has amazing coverage from below 20 MHz to 26GHz. With nominal gains of 0 dBi or higher over 99.5% of the frequency range.

The system contains a full-feature Core 2 Duo PC running Windows 7 and a state-of-the-art receiver (designed by Winkelmann). The receiver uses an analogue front end, combined with software filtering and demodulation to provide the best combination of fast scan speed and receiver performance. This design enables the system to sweep extremely fast; the software provides a wide range of analysis tools for the detection and location of bugging devices. The user interface has been carefully designed to be simple and intuitive; the spectrum analyzer display shows the entire spectrum in one graphical window with the facility to zoom in on areas of interest. A separate zoom window allows the user to simultaneously look at areas of the spectrum in high-resolution mode. Displays spectrum as a list or graphically. Facility to compare lists or graphs sampled in different locations, plus allows user to zoom over the spectrum without any interruption at even 20MHz.

Technology Overview

The software package includes :+ Spectrum analyzer window+ Spectrum zoom window+ User definable start and stop frequencies+ Signal log window+ Waterfall display+ Automatic sweep for analogue bugs + Video display (PAL/NTSC/SECAM)+ Audio receiver (analog demodulation)+ Automatic frequency control (graphical fine tune interface)+ Probe search window+ Ultra-wideband receiver (optional)+ Save spectrum displays or ‘snapshot’ of brief signals+ Save application configurations and user-defined parameters to disk

Software

RAPTOR RXi DATA SHEET

Screenshots

Clear Graphical display of full spectrum analyzer bandwidth, 6GHz, 10GHz or 26GHz (depending on model)

5 6 7 8 91 2 3

11 12 13 14

4 10 Legend:

1: Main frame menu2: Signal log controls3: Signal log window4: Spectrum analyzer toolbar5: Trace display colour controls6: Start/Stop scan controls7: Scan frequency controls8: Activate/Display signal log9: Activate/Display waterfall display10: Display spectrum zoom window11: Signal log signal snapshot12: Spectrum analyzer window13: Waterfall window14: Spectrum zoom window

RAPTOR RXi DATA SHEET

The Raptor RXi comes in a soft carry case. The optional Accessory Case can be attached to the main Raptor RXi carry case using the four snap-on clips.

Legend:

1: Accessory case2: Raptor carry case

Right-Side View

Left-Side View

Legend:

1: Antenna2: Base unit3: VGA monitor output*

4: Video monitor output* 5: HDMI*

6: 2 x USB connectors* 7: Gigabit Ethernet connector* 8: Stylus 9: Battery compartment

* Layout and availability of these connectors are subject to change.

1

4 5 6 7

3 4 5 6

1

Legend:

1: Speaker output connector 2: Speaker 3: DC supply input connector 4: Mic input connector5: Mains interface connector

6: Mains interface fuses 7: 2 x external RF in connector 8: Power On/Off button

32 98

2 8

Profiles

Transport Case

1

2

7

RAPTOR RXi DATA SHEET

Directional Log Periodic Probe

Antenna for locating digital transmissions

1

Legend:

1: Spare battery 2: Tone box antenna3: Handle / Tripod4: Tone box5: Battery charger power adaptor6: DC power cable and mains supply lead7: Directional Probe Antenna8: Probe cable (underneath the antenna)9: Stand-alone battery charger

2

3

4

5

6

8

9

7

Accessory Case (optional)

The Directional Probe Antenna can be used as a probe antenna when performing a probe search and as a desktop directional antenna.

The probe search window can be used with a Probe Antenna to findthe location of a suspect transmission.

The probe search gives a visual (and audible if required) reading of the strength of a signal. Using an external directional antenna, this can beused to locate the physical location of a transmitter. The Raptor RXi optional accessory case contains a Directional Probe Antenna (right) which can be used for this purpose. This Directional Probe Antenna is officially rated from 700MHz to 6GHz. In practice the probe antenna performs below 700MHzand above 6GHz. (Other frequencies are available upon request – seeProduct Codes on back page.)

Probe Search Window

External antenna, omni wide-band passive, 20MHz - 26GHz supplied with tabletoptripod and roof rack mount

RAPTOR RXi DATA SHEET

For further information contact

Winkelmann (UK) LimitedUnit 63, Rowfant Business CentreWallage Lane, Rowfant, Near CrawleyWest Sussex RH10 4NQ UK

T: +44 (0) 1342 719024F: +44 (0) 1342 719030E: sales@winkelmann.co.ukwww.winkelmann.co.uk

Product Codes

RAPTOR RXi Countersurveillance Receiver – Full Systems

3-299-020 RAPTOR RXi 6GHz- Full system and accessories with signal processing software, video demodulation, built- in auto switching antenna system, high resolution 15” touch screen display with ‘drag’ & ‘move’ controls, internal Li-ion rechargeable battery, universal power supply 90-264V AC, power cable, protective soft carry case & guidance manual

3-299-021 RAPTOR RXi 10GHz- Full system and accessories with signal processing software, video demodulation, built- in auto switching antenna system, high resolution 15” touch screen display with ‘drag’ & ‘move’ controls, internal Li-ion rechargeable battery, universal power supply 90-264V AC, power cable, protective soft carry case & guidance manual

3-299-022 RAPTOR RXi 26GHz- Full system and accessories with signal processing software, video demodulation, built- in auto switching antenna system, high resolution 15” touch screen display with ‘drag’ & ‘move’ controls, internal Li-ion rechargeable battery, universal power supply 90-264V AC, power cable, protective soft carry case & guidance manual

RAPTOR RXi Receiver – Accessories & Upgrades

3-299-023 Ultra Wideband Receiver Module (built-in) designed specifically for detecting ultra wideband transmission based on multiband OFDM

3-299-024 Accessory case including Directional Log Periodic Probe Antenna with SMA connector, 8m cable, tone box (1), tone box antenna, spare Li-ion rechargeable battery, smart battery charger 90/260V all housed in protective soft pouch including machined foam insert (Accy Pouch can be attached to the side of main Raptor case)

3-299-025 Spare slot-in rechargeable Lithium-ion smart battery

3-299-026 Desktop smart charger: 90-260V AC, output: 12V, 2.5A DC

3-299-027 Directional Log Periodic Probe Antenna 680MHz to 18GHz with 8m cable

3-299-028 Directional Log Periodic Probe Antenna 100MHz to 26GHz with 8m cable

3-299-029 External antenna, omni wide-band passive, 20MHz - 26GHz supplied with tabletop tripod and roof rack mount

3-299-030 Rectrix software long-term waterfall analysis with historic waveform recall (per license)

3-299-031 Rostrum software view raptor files on any windows PC (per license)

3-299-048 Tone Box with antennae

3-299-995 GSM196 Cellular Detector can detect both 2G (GSM900/1800) and 3G (WCDMA /UMTS 2100) with cadenced vibration alert and latched alarm, omni-directional antenna and guidance manual

3-299-993 GSM196A Cellular Detector can detect both 2G (GSM850/1900) and 3G (WCDMA /UMTS 2100) with cadenced vibration alert and latched alarm, omni-directional antenna and guidance manual

Technical SpecificationsReceiver Frequency range 10kHz – 6GHz 10kHz – 10GHz 10kHz – 26GHz Tuning resolution 1Hz Demodulation bandwidth 6kHz, 15kHz, 30kHz 110kHz, 220kHz Demodulation modes AM, FM Sensitivity -110dBm DANL -100dBm System phase noise -90dBc at 10kHz Attenuation 0dB to -31.5dB in 0.5dB steps Dynamic range 90dB (SFDR: 80dB) Aux RF in 10kHz – 26GHz RF input 2x 50 ohms (1x 10kHz - 6GHz & 1x 10kHz - 26GHz) Maximum RF input +10 dBm (10kHz - 6GHz) -6 dBm (6GHz - 26GHz) Power (overall system) 19 VDC (150 Watts max.)Spectrum Analyzer Frequency range 10kHz – 6GHz 10kHz – 10GHz 10kHz – 26GHz Sampling resolution 3kHz IF display bandwidth 20MHz Sensitivity -110dBm at 3kHz Sampling Resolution Scan time >6GHz/secVideo Demodulation Formats PAL, NTSC, SECAM Modulation types AM, AM inverted FM, FM invertedProcessing Processor Intel Core 2 Duo Display 15” Colour LCD with Touchscreen Operating system Windows 7 Hard drive capacity 1TBDisplay Modes Full Bandwidth Spectrum Analyzer, Full Bandwidth Waterfall Spectrum Zoom, Signal Logging, Video, Probe Search UWB Receiver (optional)Inputs/Outputs 2 x Aux RF, 2 x USB ports as standard, Monitor Output, HDMI, EthernetDimensions & Weights Dimensions 375mm x 360mm x 130mm Weight Approx 8KgOperating Temperature 0o C to + 50o CPower Supply Universal power supply 90-264V AC, 47-63Hz Size 65mm (D) x 37.5mm (H) x 169mm (W) Battery Slot-in rechargeable Lithium-ion smart battery Size 22.3mm (H) x 285mm (L) x 58.9mm (W) Weight 700g Battery life Approx. 90 minutesCharger (supplied with optional Accy Case) Desktop smart charger 90-260V AC, Output 12V, 2.5A DC Size 58.0mm (H) x 180mm (L) x 92.0mm (W) Weight 235g (excluding power supply)