RANGE OF SUPPLY

OUR RANGE OF SUPPLYPleissner Guss GmbH concentrates on supplies and services for the extensive market of special and general engineering as well as valve bodies and pumps in weights ranging from 150 kgs to 10 tons. The range of materials includes all cast steel grade – from unalloyed to high-alloyed – as well as special alloys based on nickel in accordance with the charts depicted below. Other special qualities and equivalent materials to various standards and customer requirements can also be manufactured on request. Technical preparations for manufacturing castings and product development are implemented using state-of-the-art computer-aided simulation techniques for key parameters of the production process; accordingly, the solidification process, distribution of stresses and even the mechanical features are depicted on request before the production process thereby creating the essential guidelines for intensive consultation to be availed of by our customers.

LIST OF MATERIALS SUPPLIEDSELECTION, ADDITIONAL MATERIALS UPON REQUEST

STEEL CASTINGS FOR GENERAL APPLICATION ACC. ENMaterial number Designation Standard Code- GE200-GE360 EN 10293- GS200 + GS240 EN 10293 / EN 103401.1131 G 17Mn5 EN 10293 / EN 103401.6220 G 20Mn5 EN 10293 / EN 103401.1118 G 24Mn6 EN 10293 / EN 103401.1165 G 28Mn6 EN 102931.6750 G 20NiMoCr4 EN 102931.6759 G 18NiMoCr3-6 EN 10340 / SEW 5201.6760 G 22NiMoCr5-6 SEW 5201.7221 G 26CrMo4 EN 102931.7230 G 34CrMo4 EN 102931.7231 G 42CrMo4 EN 10293

STEEL CASTINGS FOR GENERAL APPLICATION ACC. ASTM Designation Standard Code Grade 1 A 487 Grade 2 A 487 Grade 4 A 487 Grade 6 A 487 Grade 8 A 487 Grade 9 A 487 Grade 10 A 487 Grade CA15 A 487 Grade CA15M A 487 Grade CA6NM A 487

CAST STEEL FOR HIGH TEMPERATURE ACC. ASTM Designation Standard Code WCA / WCB / WCC A 216 WC1 A 217 WC6 A 217 WC9 A 217 WC11 A 217 C5 A 217 C12A A 217 CA15 A 217 Grade 1, 2 ,5, 6, 9, 10,12 A 356 Grade CA6NM A 356

CAST STEEL FOR HIGH TEMPERATURE ACC. ENMaterial number Designation Standard Code1.0619 GP 240GH EN 102131.0625 GP 280GH EN 102131.5419 G 20Mo5 EN 102131.7357 G 17CrMo5-5 EN 102131.7379 G 17CrMo9-10 EN 102131.7706 G17CrMoV5-10 EN 102131.7365 GX 15CrMo5 EN 102131.4317 GX 4CrNi13-4 EN 102131.4405 GX CrNiMo16-5-1 EN 10213n.a. GX12CrMoVNbN9-1 COST C91n.a. GX12CrMoWVNbN10-1-1 COST C10 1 1n.a. GX12CrMoCoVNbNB9-2-1 COST CB2

33

CAST STEEL FOR LOW TEMPERATURE ACC. ENMaterial number Designation Standard Code1.1131 G 17Mn5 EN 102131.6220 G 20Mn5 EN 102131.5422 G 18Mo5 EN 102131.5638 G 9Ni14 EN 102131.6982 GX 3CrNi13-4 EN 10213

CAST STEEL FOR LOW TEMPERATURE ACC. ASTM Designation Standard Code LCA / LCB / LCC A 352 LC1 A 352 LC3 A 352 Grade CA6NM A 352

Steam Turbine Casing - G17CrMoV5-10 - upper part

2,800 kgs + lower part 2,400 kgs

lower part

upper part

Suction Casing - G20Mn5 QT - 600 kgs

MARTENSITIC STAINLESS STEEL ACC. ENMaterial number Designation Standard Code1.6982 GX 3CrNi13-4 EN 10293 / EN102131.4317 GX 4CrNi13-4 EN 10293 / EN 10213 / EN 10340 / EN 102831.4405 GX CrNiMo16-5-1 EN 10293 / EN 10213 / EN 10340 / EN 102831.4008 GX 7CrNiMo12-1 EN 10283

MARTENSITIC STAINLESS STEEL ACC. ASTM Designation Standard Code CA15 A 217 / A 487 / A 743 CA15M A 487 / A 743 CA6NM A 352 / A 356 / A 487 / A 743

5

Steam Turbine Casing - G17CrMoV5-10 - upper part

2,800 kgs + lower part 2,400 kgs

lower part

upper part

AUSTENITIC STAINLESS STEEL ACC. ENMaterial number Designation Standard Code1.4308 GX 5CrNi19-10 EN 10283 / EN 102131.4309 GX 2CrNi19-11 EN 10283 / EN 102131.4552 GX 5CrNiNb19-11 EN 10283 / EN 102131.4408 GX 5CrNiMo19-11-2 EN 10283 / EN 102131.4409 GX 2CrNiMo19-11-2 EN 10283 / EN 102131.4581 GX 5CrNiMoNb19-11-2 EN 10283 / EN 10213

FULLY AUSTENITIC STAINLESS STEEL ACC. ENMaterial number Designation Standard Code1.3960 GX 2CrNiMoN18-14 SEW 3951.4538 GX 1NiCrMoCuN25-20-5 SEW 4101.4565 GX 2CrNiMnMoNbN25-18-5-4 SEW 400

AUSTENITIC STAINLESS STEEL ACC. ASTM Designation Standard Code CF8 A 351 / A 743 / A 744 CF8M A 351 / A 743 / A 744 CF3 A 351 / A 743 / A 744 CF3M A 351 / A 743 / A 744

FULLY AUSTENITIC STAINLESS STEEL ACC. ASTM Designation Standard Code CK3MCuN / UNS S 93254 A 743 / A 744

Joint Middle Piece - G20Mn5 QT - 4,000 kgs

DUPLEX STAINLESS STEEL ACC. EN Material number Designation Standard Code1.4470 GX 2CrNiMoN22-5-3 EN 10283 / EN 102131.4468 GX 2CrNiMoN25-6-6 EN 10283 / EN 102131.4417 GX 2CrNiMoN25-7-3 EN 10283 / EN 102131.4517 GX 2CrNiMoCuN25-6-3-3 EN 10283 / EN 102131.4469 GX 2CrNiMoN26-7-4 EN 10283 / EN 10213

DUPLEX STAINLESS STEEL ACC. ASTM Designation / Standard Code A 890 / A 995 Grade 1A , UNS J 93370 , CD4MCu A 890 / A 995 Grade 4A , UNS J 92205 , CD3MN A 890 / A 995 Grade 5A , UNS J 93404 , CE3MN

7

AUSTENITIC NODULAR CAST IRON ACC. EN AND ASTM EN13835 ASTM A 469

Material number Designation Type5.3500 EN-GJSA-XNiCr20-2 D-25.3503 EN-GJSA-XNi22 D-2C5.3501 EN-GJSA-XNiMn23-4 -5.3507 EN-GJSA-XNiCr30-3 D-35.3504 EN-GJSA-XNi35 D-55.3509 EN-GJSA-XNiCr35-3 D-5B5.3505 EN-GJSA-XNiSiCr35-5-2 D-5S

Cylinder Casing for LNG Compressor - EN-GJSA-XNi35 - 4,000 kgs

9

NI-BASE-ALLOY ACC. ASTM A 494 ASTM A 494 Alloy type RemarksUNS No. Grade N08826 CU5MCuC NiCr21Mo Alloy 826N26625 CW6MC NiCr22Mo9Nb Alloy 625N26022 CX2MW NiCr21Mo14W Alloy 22N26059 CX2M NiCr23Mo16 Alloy 59

Cylinder Casing – G20Mn5N – 5,400 kgs

OUR TECHNOLOGY3 medium-frequency induction furnaces (0.5, 1.5 and 3 tons)2 electric arc furnaces with a capacity of up to 10 tons and 1 VOD plant with a capacity of 7 tons.

Castings are manufactured using a mechanical cold-resin moulding plant (1,400 x 1,000 to 2,200 x 1,200 mm) and a classic hand-moulding plant based on the cold-resin moulding process (max. moulding box size: 4,500 x 4,500 x 3,000 mm).

Manufacturing equipment encompasses all requisites for heat treatment, testing and secondary treatment for a wide range of products. We process cast parts ready for installation on state-of-the-art CNC machine tools.

OUR MARKETKey market segments include the construction of industrial valves, pumps and compressors, shipbuilding and railway vehicles. At the same time, components are also supplied for the construction of turbines, hydro power stations and process technology. More than 50 percent of our products are exported to Europe and other international destinations. Our technicians maintain an intensive partnership with our customers. This ensures being involved as early as possible in the development and construction of cast parts in order to comply with all of our customers‘ requirements in the most optimal way.

OUR QUALITYOur work is based on a comprehensive quality assurance system. Certified for the first time in 1993, our quality assurance system was adapted to the valid DIN EN ISO 9001:2008 standard in 2006. It goes without saying that we also possess the typical supplier approvals issued by a variety of official classification societies such as for the areas of pressure vessels, nuclear technology and railway vehicle components as well as the extensive areas of shipbuilding and offshore technology.

The extensive equipment availed of by our company for non-destructive testing comprises the entire range of surface crack testing and volume testing using ultrasonic and radiation tests. The latter technique can be used for examining walls up to 200 mm thick, using a 3 MeV linear accelerator.

Thanks to test personnel qualified to the ASNT and EN standards, we are capable of complying with all of the recognised test requirements. Apart from the equipment for non-destructive testing, we also meet all of the requisite requirements for carrying out destructive material tests. Our mechanical laboratory as well as a fully equipped metallography department enable us to implement all of the test stages associated with the acceptance of components in-house.

This equipment is supplemented by comprehensive systems for examining dimensions including a CNC metering machine for components of up to 3,300 x 2,030 x 1,500 mm in size.

11

Pleissner Guss GmbH

Duderstädter Str. 17 37412 Herzberg am Harz Germany

Tel. +49 (0) 5521 83-0 Fax +49 (0) 5521 83-259

vertrieb@pleissner-guss.de www.pleissner-guss.de SM

02-L

P;E;

5/0

3.1

6/X

XXXX

XX