RAN474_ Multi-RAB_ AMR + 3 PS data
description
Transcript of RAN474_ Multi-RAB_ AMR + 3 PS data
![Page 1: RAN474_ Multi-RAB_ AMR + 3 PS data](https://reader035.fdocuments.in/reader035/viewer/2022081803/5695d5391a28ab9b02a480b5/html5/thumbnails/1.jpg)
1�� RAN474: Multi-RAB: AMR + 3 PS data
This feature belongs to application software.
1.2.1 Description
This feature increases the number of simultaneous NRT PS RAB allocations to three.
The following new multi-RAB combinations are supported for one UE:
• 2 NRT PS RABs
• 3 NRT PS RABs
• AMR + 2 NRT PS RABs
• AMR + 3 NRT PS RABs
The bit rates of the DCHs allocated for the RABs are selected so that the total bit rate
does not exceed 384 kbit/s.
Operational aspects
The operator can monitor the used multi-RAB configurations through multi-RAB specific
counters.
1.2.2 Requirements
System requirements
None.
Software requirements
Directed RRC connection setup for HSDPA layer:
• RAN release RAN04
• RNC release RN2.0
• Flexi Lite WL7.0 2.0
• NetAct release OSS3.1 ED3 CDs
• SGSN release SGN2
• MSC release M11
• MGW release U1.5
Hardware requirements
For Flexi Lite BTS WCDMA this feature requires the following feature:
• RAN2157: Flexi Lite BTS 2100
O������� ���������
None.
End-user requirements
None.
Radio resource management and telecom features WCDMA RAN, Rel. RAN04, Feature Descriptions
12 DN0940947 Issue: 02A