RAMMER - Construction, Surface Preperation Equipment ...

Doc. # PB-B19027 Orig. Rel. – 06/2016

Curr Rev. - 02

RAMMER BT1400, BT1600

PARTS BOOK

BT1400, BT1600 PARTS BOOK

PB – B19027

ORIGINAL LANGUAGE PARTS BOOK FOR BARTELL RAMMERS

© 2020 Bartell Morrison Inc.

No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval

system without the prior written permission of Bartell Morrison Inc. unless such copying is permitted by federal copyright laws.

Address inquiries or reference permissions care of:

Bartell Morrison Inc., 170 Traders Blvd E., Mississauga, Ontario, Canada, L4Z 1W7

REV. DATE DESCRIPTION APPROVED BY:

01 08/2017 Changed P/N’s AN

02 03/2020 Updated all part numbers AN

Bartell Morrison Inc. 170 Traders Blvd E

Mississauga, Ontario, Canada L4Z 1W7

Tel: (647) 953-4100 Fax: (647) 953-4101

SPE International Ltd Honeyholes Lane

Dunholme, Lincoln, England LN2 3SU

Tel: 01673 860709 Fax: 01673 861119

Bartell Morrison USA LLC 200 Commerce Drive, Unit A

Freehold, NJ, USA 07728

Tel: (848) 225-8100 Fax: (848) 225-8101

Innovatech 832 80th Street SW

Everett, Washington, USA 98203

Tel: (425) 405-9100 Fax: (425) 405-9101


PB – B19027

TABLE OF CONTENTS

TANK AND HANDLE ASSEMBLY DIAGRAM 1

o TANK AND HANDLE - PARTS LIST 1 2

CYLINDER AND FOOT ASSEMBLY DIAGRAM 3

o CYLINDER AND FOOT ASSEMBLY - PARTS LIST 2 4

CRANK CASE AND ENGINE ASSEMBLY DIAGRAM 5

o CRANK CASE AND ENGINE ASSEMBLY - PARTS LIST 3 6

PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer nor distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of the replacement parts thereto.


PB – B19027

TANK AND HANDLE ASSEMBLY DIAGRAM


PB – B19027

TANK AND HANDLE - PARTS LIST 1

Item Part No. Description QTY Remarks

1 65CT-66P1-A FUEL TANK CAP 1

2 65101 FUEL TANK, COMPLETE 1

3 65CT-66P1-02A FUEL VALVE AND SCREEN ASSEMBLY 1

3a 651159 EXTERNAL FUEL FILTER 1

4 11617 LOCKNUT, M8 2

5 11667 WASHER, M8 2

10 65CT-66P1-06A HOSE BAND 2

11 65CT-66P1-07A FUEL HOSE 1

13 651050 THROTTLE LEVER ASSEMBLY 1

15 65CT-66P1-11A HANDLE 1

16 51058 HHCS, M6-1.0 x 20MM 2

17 14448 LOCKWASHER, M6 2

18 10069 HEX NUT, M6 2

19 31008 HHCS, M10-1.5 x 20MM 4

20 65100 SHOCK ABSORBER 2

20-1 30282 SHCS, M10-1.5 x 20MM 4

20-2 11621 LOCKWASHER, M10 8

21 65CT-66P1-19A ROLLER 2

22 60222 HHCS, M5-0.8 x 25MM 4

23 30846 WASHER, M5 4

24 30843 LOCKNUT, M5-0.8 4


PB – B19027

CYLINDER AND FOOT ASSEMBLY DIAGRAM


PB – B19027

CYLINDER AND FOOT ASSEMBLY - PARTS LIST 2

Item

Part No.

Description QTY Remarks BT1400 BT1600

1 65CT-66P1-01C 65CT-66P2-01C PISTON ROD 1

2 65CT-66P1-02C 65CT-66P1-02C PISTON PIN END CAP 2

3 65CT-66P1-03C 65CT-66P2-03C PISTON PIN 1

4 65CT-66P1-04C 65CT-66P2-04C STOPPER, UPPER 1

5 65CT-66P1-05C 65CT-66P2-05C SPRING CYLINDER 1

6 35045 35045 O-RING G-75 1

7 65CT-66P1-07C 65CT-66P2-07C STOPPER, LOWER 1

8 65CT-66P1-08C 65CT-66P2-08C MAIN SPRING 2

9 65CT-66P1-09C 65CT-66P2-09C PISTON END 1

10 32026 32026 LOCKNUT, M20-1.5 1

11 65CT-66P1-11C 65CT-66P1-11C FOOT PLATE 1

12 11753 11753 SOCKET HEAD BOLT M10X35T 4

13 10059 10059 SOCKET HEAD BOLT M10X25T 4

14 65CT-66P1-14C 65CT-66P1-14C PACKING M10 (AL) 1

15 65CT-66P1-15C 65CT-66P1-15C PLUG M10X1.0X10 1

16 65CT-66P1-16C 65CT-66P1-16C PROTECTION SLEEVE 1

16-1 651194 651194 O-RING, 100MM X 5.3MM 1

16-2 651210 651210 O-RING, M20 1

16-3 651211 651211 OIL LEVEL SIGHT GAUGE 1

16-4 65CT-66P1-16-4C 65CT-66P1-16-4C PACKING M16 1

16-5 65CT-66P1-16-5C 65CT-66P1-16-5C PLUG M16X1.5X10 1

17 65CT-66P1-17C 65CT-66P1-17C FOOT ASSEMBLY 1

18 651175 651175 GRIP HANDLEBAR 1

19 10956 10956 LOCKNUT, M12-1.75 4

20 10735 10735 LOCKWASHER M12 4

21 31441 31441 FHSCS, M12-1.75 x 65MM 2

22 11916 11916 FHSCS. M12-1.75x70MM 2

23 651195 651195 O-RING, 170MM X 4MM 2

24 31415 31415 BELLOW CLAMP 2

25 65CT-66P1-25C 65CT-66P1-25C BELLOW 1

26 65CT-66P1-26C 65CT-66P2-26C GUIDE CYLINDER 1

27 651212 651212 O-RING, 80MM X 3 MM 1

28 11924 11924 HHCS, M10-1.5 X 40MM 4

29 11621 11621 LOCKWASHER, M10 4


PB – B19027

CRANK CASE AND ENGINE ASSEMBLY DIAGRAM


PB – B19027

CRANK CASE AND ENGINE ASSEMBLY - PARTS LIST 3

Item # Part No. Description QTY REMARK

1 65CT-66P-01B AIR CLEANER ASSEMBLY 1

1-1 65CT-66P-01-1B COVER, AIR CLEANER 1

1-2 65CT-66P-01-2B PACKING, AIR CLEANER 1

1-3 65CT-66P-01-3B ELEMENT, AIR CLEANER 1

1-4 65CT-66P-01-4B GRIP BOLT, AIR CLEANER 1

2 31387 INTAKE PIPE 1

3 65CT-66P-03B CLAMP 2

4 65CT-66P-04B CRANK CASE 1

5 65CT-66P-05B FRONT COVER 1

5-1 51058 HHCS, M6-1.0x20MM 9

6 USE RTV LIQUID GASKET FOR REPLACEMENT 1

7 11619 HHCS, M8-1.25x25MM 1

8 11614 LOCKWASHER M8 1

9 65CT-66P-09B WASHER 9X30X4 1

10 31363 STOP RING R-52 1

11 31437 BEARING 6304 1

12 65CT-66P-12B CONNECTING ROD 1

13 65CT-66P-13B CRANK GEAR 1

14 10370 BEARING 6305 1

15 11379 BEARING 6203 1

16 65CT-66P-16B WASHER 8.5X22X3 1


18 11619 HHCS, M8-1.25x25MM 1

19 65CT-66P-19B O-RING G-35 1

20 65CT-66P-20B BEARING COVER 1

21 51058 HHCS, M6-1.0x20MM 2

22 65CT-66P-22B PINION 1

23 31367 KEY 5X5X19R 1

24 31373 STOP RING S-35 1

25 76542 BEARING 6007 1

26 65CT-66P-26B SPACER 35.4-42.7-10 1

27 31374 BEARING 6007Z 1

28 65CT-66P-28B SPACER, CLUTCH DRUM 1

29 651196 O-RING S-90 1

30 651197 OIL SEAL TC-40528 1

31 65CT-66P-31B CLUTCH DRUM 1

32 11667 WASHER M8 1

33 10999 HHCS, M8-1.25X20MM 1

34 31013 LOCK NUT 1

35 65102-1 CLUTCH ASSEMBLY 1

36 65200 WOODRUFF KEY 1

37 10193 NUT M8-1.25 4


39 11667 WASHER M8 4

CONTINUED ON NEXT PAGE.


PB – B19027

CRANK CASE AND ENGINE ASSEMBLY – PARTS LIST 3 (CONTINUED)

Item Part No. Description QTY Remark

40 - ENGINE 1

40-1 65CT-66P-40-1B ADAPTER, FLANGE 1

40-2 65CT-66P-40-2B DOWEL PIN 2

40-3 65CT-66P-40-3B STIFFENER 1

40-4 11619 HHCS, M8-1.25x25MM 2

40-5 10999 HHCS, M8-1.25X20MM 4

41 10407M HHCS, M8-1.25x30MM 4

42 65CT-66P-42B OIL GAUGE PROTECTOR 1

43 65CT-66P-43B LINK PROTECTOR 1

44 10999 HHCS, M8-1.25X20MM 4


PB – B19027

This Page Intentionally Left Blank

RAMMER - Construction, Surface Preperation Equipment ...

Documents

Transcript of RAMMER - Construction, Surface Preperation Equipment ...