RAJ M. MANGLIK - Mechanical · PDF fileRAJ M. MANGLIK Mechanical and Materials Engineering...
Transcript of RAJ M. MANGLIK - Mechanical · PDF fileRAJ M. MANGLIK Mechanical and Materials Engineering...
5/17
page 1 of 34
RAJ M. MANGLIK
Mechanical and Materials Engineering (CEAS) 5688 Bayberry Drive Thermal-Fluids & Thermal Processing Laboratory Cincinnati, OH 45242-8016 University of Cincinnati, Cincinnati, OH 45221-0072 (513) 792-0877 : (513) 556-5704; : (513) 556-3390 E-mail: [email protected] US Citizen http://www.min.uc.edu/tftpl
SCIENTIFIC INTRESTS
Interfacial phenomena, molecular dynamics of surface-active self-assembled biomolecules and polymers, micro-
scale processes, boiling heat transfer, thermal processing of polymeric materials and non-Newtonian flows, multi-
scale (molecular-nano-micro-macro-scales) analysis, enhancement of heat transfer, biological thermal-fluid
systems, compact heat exchangers, micro-electronics cooling, experimental techniques, and CFD.
EDUCATION
Ph.D., Mechanical Engineering, 1991, Rensselaer Polytechnic Institute, Troy, NY
M.S., Mechanical Engineering, 1986, Iowa State University, Ames, IA
B.Tech., Mechanical Engineering, 1976, Indian Institute of Technology – Madras, Chennai, India
EXPERIENCE AND LEADERSHIP
Research and Teaching:
2001 – present Professor of Mechanical Engineering, University of Cincinnati, Cincinnati, OH
1996 – present Director – Thermal-Fluids and Thermal Processing Laboratory, Department of Mechanical,
Industrial and Nuclear Engineering, University of Cincinnati, Cincinnati, OH
1996 – 01 Associate Professor of Mechanical Engineering, University of Cincinnati
1991 – 96 Assistant Professor of Mechanical Engineering, Department of Mechanical, Industrial and
Nuclear Engineering, University of Cincinnati, Cincinnati, OH
1987 – 91 Research Assistant, Teaching Assistant, and Master Teaching Fellow
Department of Mechanical Engineering, Aeronautical Engineering & Mechanics, Rensselaer
Polytechnic Institute, Troy, NY
1984 – 87 Research Assistant, Heat Transfer Laboratory
Department of Mechanical Engineering, Iowa State University, Ames, IA
Industrial Experience:
1983 – 84 Executive Assistant, New Projects & Product Diversification, The Triveni Engineering Works
Ltd., Allahabad, India Implemented technology transfer for collaborations with General Electric, Schenectady, NY, and Terry
Corporation, Windsor, CT. Supervised the design and manufacture of heat exchangers.
1977 – 84 Design Engineer, Steam Turbines & Cogeneration Systems Division, The Triveni Engineering
Works Ltd., Allahabad, India Designed steam turbines, heat exchangers, and surface condensers (collaborators: Peter Brotherhood,
UK, General Electric USA, and Terry Corporation, USA); conducted techno-commercial negotiations.
Raj M. Manglik
page 2 of 34
1976 – 77 Applications Engineer, Fluid Power (Wintrol) Division, Wipro Products Ltd., Bangalore, India
Engineering and development of hydraulic/pneumatic actuators for excavating equipment; independent
charge of product marketing and new application identification for all of north India; value
engineering/value analysis of hydraulic and pneumatic cylinders.
Consulting & Professional Development:
1994 – 2000 Designed and instructed professional development courses at Procter & Gamble Co., on heat
transfer, thermodynamics, and heat exchanger design for process industry applications.
1986 – present Consultant to the following companies for various engineering projects:
Wieland-Werke AG, Ulm, Germany
Brown Fintube Co., Houston, TX
Procter & Gamble Co., Cincinnati, OH, and Sacramento, CA;
Kintec Services, Inc., Cincinnati, OH
Airtronic, Inc., Cincinnati, OH
Energy & Environmental Research Corporation, Irvine, CA
Whirlpool, Nashville, TN
Structural Dynamics Research Center (SDRC), Cincinnati, OH
Patheon, Cincinnati, OH
Condeu Ltd., London, UK
Krayton Polymers, Houston, TX
BASF (The Chemical Co.), Florham Park, NJ
University & Collegiate Leadership (University of Cincinnati):
Elected Member, Decanal Search Committee, College of Engineering and Applied Science, 2013-14.
Elected Member, University Faculty Senate, 2012 – 14.
Member – Promotion and Tenure Committee, College of Engineering and Applied Science, 2011-14.
Co-Chair – All-University Committee on Graduate Faculty Status, Graduate School and Office of the Vice
Provost for Advanced Studies, 2010.
Member – Graduate Program Review Committee, Materials Science and Engineering, Office of the Vice
Provost for Advanced Studies and Graduate School, 2010-11.
Chair – Distinguished Lecture Committee, UC Fellows of the Graduate School, 2007 – 10.
Member – Graduate Council Sub-Committee, New Programs Review, 2007-10.
Member – Distinguished Lecture Committee, UC Fellows of the Graduate School, 2005-07.
Chair, Decanal Review Committee, College of Engineering, 2002 – 03.
Elected Member, University Faculty Senate, 2002 – 04; and 2004 – 06. Member – Faculty Senate Nominations Coordinating Committee, 2003.
Member – University Appeals Committee (University Judicial Affairs), Faculty Senate, 2000-01.
Elected Member – Dean’s Advisory Committee, College of Engineering, 1997 – 2000.
Member – Herman Schneider Medal Committee, College of Engineering, 1994-99.
Member – Faculty Search Committee, Mechanical, Industrial and Nuclear Engineering, 2005. Culminated in the successful hiring of Dr. S.Y. Son, Assistant Professor of ME.
Chair – Faculty Search Committee, Mechanical, Industrial and Nuclear Engineering, 1999 – 2001. Culminated in the successful hiring of Dr. R.K. Banerjee, Assistant Professor of ME.
Member – Promotion, and Tenure Committee, Department of Mechanical, Industrial and Nuclear
Engineering, 2001 – present.
Raj M. Manglik
page 3 of 34
Chair – Honors and Awards Committee, Department of Mechanical, Industrial and Nuclear Engineering,
1997 – 2005.
Member – Laboratory Development Committee, Department of Mechanical, Industrial and Nuclear
Engineering, 1997 – present.
Director – Thermal-Fluids and Thermal Processing Laboratory, College of Engineering, 1996 – present.
Member – Ad-Hoc Committee, Mechanical Engineering and Aeronautical Engineering merger (curriculum
and research), College of Engineering, 1999 – 2000.
Interim Graduate Studies Director – Mechanical Engineering (Thermal-Fluid Sciences), 1995-96.
Coordinator – Thermal-Fluid Science course distribution and staffing, Mech. Engg., 1996 – 2009.
Member – Ad-Hoc Committee on Faculty Performance Evaluations, Department of Mechanical, Industrial
and Nuclear Engineering, 1994.
Professional Leadership:
2011 – present Editor-in-Chief, Journal of Enhanced Heat Transfer, Begell House. Associate Editor, 1994 – 2011 (Gordon & Breach; Taylor & Francis; Begell House)
2003 – 2009 Associate Editor, Journal of Heat Transfer, ASME (two consecutive terms).
1999 – 2008 Editor, International Journal of Heat Exchangers, Edwards Publishing.
1998 – present Technical Editor, Heat Transfer & Fluid Flow Data Books, Genium Publishing (this handbook
originated at the Corporate R&D Center, General Electric).
Member, Executive Committee, ASME Heat Transfer Division, 2014 – 2020; Secretary, 2014-18.
Chair, K-10 committee, Advanced Heat Transfer Equipment, ASME Heat Transfer Division, 2013 – 2016.
Member, Scientific Committee, First International Conference on Heat Transfer and Fluid Flow (HTFF),
Prague, Czech Republic, August 2014.
Member, ASME Emerging Technology Committee (ETC), 2013 – 2015.
Chair, NSF sponsored US scientific delegation for Indo-US cooperative workshops, 2011 – 2012.
Member, ASME Heat Transfer Division K-2 committee for long-range planning, 2011 – 2015.
Chair (ASME), 10th International ISHMT-ASME Heat and Mass Transfer Conference, Indian Institute of
Technology, Chennai, India, December 28-30, 2011.
Co-Chair, Fundamentals of Heat and Mass Transfer, AJTEC 2011, 8th ASME/JSME Thermal Engineering
Joint Conference, Honolulu, Hawaii, March 13-17, 2011
Member – International Scientific Council, International Centre for Heat and Mass Transfer, Ankara,
Turkey, 2010 – to date.
Member – US Scientific Committee, IHTC-14, International Heat Transfer Conference, Washington, DC,
August 8-13, 2010.
Co-Chair, HTD Technical Tracks for Energy Systems: Analysis, Thermodynamics and Sustainability and
Sustainable Products and Processes and Sustainable Products and Processes, ASME – IMECE, Seattle,
WA, November 2007.
Chair (Heat Transfer Division), ASME Heat Transfer & Fluids Engineering Summer Conference, Charlotte,
NC, July 2004.
Organizer & Co-Chair, Arthur E. Bergles Symposium on Process, Enhanced and Multiphase Heat Transfer,
Georgia Institute of Technology, Atlanta, GA, November 1996.
Raj M. Manglik
page 4 of 34
HONORS AND DISTINCTIONS
Awards & Recognitions:
ASME Heat Transfer Memorial Award, 2016
In recognition of outstanding contributions to the field of heat transfer, and particularly for “pioneering and seminal advancement
of the science and engineering of interfacial transport phenomena, boiling, thermal processing of non-Newtonian media, enhanced
heat transfer, and micro-scale compact heat exchangers, leading to transformative contributions to the archival literature as well as
engineering design practice.”
Distinguished Research Award, College of Engineering, University of Cincinnati, 2016; 2012; 2008
ASME Heat Transfer Division 75th Anniversary Medal, 2013
Second place award, International ASHRAE Student Design Competition, Integrated Sustainable Building
Design (ISBD) category (faculty mentor), 2013
First place award, International ASHRAE Student Design Competition, ISBD (faculty mentor), 2012
Rising Star award, International ASHRAE Student Design Competition, ISBD (faculty mentor), 2011
Listed in Who’s Who in Science and Engineering, since 2010; in American Men & Women of Science, since
2009; in Who’s Who in America, since 2007; in Who's Who in Engineering Academia, since 2003
Master Educator Award, College of Engineering, University of Cincinnati, 2010
Professor of the Quarter, Spring 2009, Engineering Tribunal, University of Cincinnati:
In Recognition of Outstanding Classroom Instruction and Concern for Students
Japanese Society of Mechanical Engineers (JSME) & American Society of Mechanical Engineers (ASME) –
Thermal Engineering/Heat Transfer Division Service Awards (3), July 2007.
Melville Medal, ASME, 2006; for the best original scientific contribution published in an ASME Journal in
the preceding two calendar years; cited for the following paper:
J. Zhang and R.M. Manglik, “Additive Adsorption and Interfacial Characteristics of Nucleate Pool Boiling in Aqueous Surfactant
Solutions,” Journal of Heat Transfer, 127(7), pp. 684-691, 2005
Elected Fellow of the Graduate School, University of Cincinnati, 2005
Elected Fellow of ASME (American Society of Mechanical Engineers), 2004
Elected Fellow of Wessex Institute (UK), 2004
ASME – Heat Transfer Division Service Award, July 2004
BP Faculty Excellence Award, Mechanical Engineering, 2004
Elected Eminent Engineer member, Tau Beta Pi, National Engineering Honor Society, 2003
Elected Senator, All-University Faculty Senate, University of Cincinnati, 2002-04; and 2004-06
Professor of the Quarter, Autumn 2001, Engineering Tribunal, University of Cincinnati
Neil Wandmacher Teaching Award, 2001, College of Engineering, University of Cincinnati
Robert Hundley Award for Excellence in Teaching in Undergraduate Education, 2000, Department of
Mechanical, Industrial and Nuclear Engineering, University of Cincinnati
Elected member, Board of Governors, 2000-02, ASHRAE – Cincinnati chapter
Elected member, University Graduate Faculty, University of Cincinnati, 1998
Cited for Outstanding Teaching, 1995, Engineering Tribunal, University of Cincinnati
Faculty Achievement Award – excellence in research & scholarship, University of Cincinnati, 1995
National Science Foundation CAREER Award, 1995
Professor of the Year, 1993, Engineering Tribunal, College of Engineering, University of Cincinnati:
Excellence in Teaching Award and in Recognition of Outstanding Classroom Instruction and Concern for Students
National Science Foundation Research Initiation Award, 1992
Cited for Outstanding Teaching, 1992, Engineering Tribunal, University of Cincinnati
Raj M. Manglik
page 5 of 34
Master Teaching Fellow, Graduate School, Rensselaer Polytechnic Institute, 1990
Tresham Medal, excellence in mathematics, Boys’ High School, India, 1969.
Important Keynotes & Plenary Lectures:
Plenary, The realm of induced helical vortices for enhancement of convective heat transfer, 5th International
Conference on Heat and Mass Transfer and Hydrodynamics of Swirled Flows, Russian Academy of Sciences,
Kazan, Russia, October 2015.
Plenary Keynote, A pathway to sustainability: the enduring relevance of enhanced heat transfer, 2013 ASME
Summer Heat Transfer Conference and 75th Anniversary Celebrations of Heat Transfer Division,
Minneapolis, MN, July 2013.
The energy conundrum and paths to sustainability, 1st Indo-US Joint NSF Workshop on Energy-Water
Sustainability, Indian Institute of Technology – Madras, Chennai, India, December 2011.
Swirl flow and enhanced heat transfer characteristics of single-phase forced convection in tubes with twisted-
tape inserts, 4th International Conference on Heat and Mass Transfer and Hydrodynamics in Swirling Flows,
Russia Academy of Sciences, and Moscow Power Engineering Institute, Russia, October 2011.
Interfacial phenomena in nucleate pool boiling of water: their role and manipulation by molecular dynamics of
surface-active additives, 9th International ISHMT-ASME Heat and Mass Transfer Conference, Mumbai, India,
January 2010.
Enhanced heat transfer and compact exchangers: challenges for a sustainable world, NSF Indo-US Workshop
on Small Scale Heat Exchangers & Fuel Cell Thermal Management for Process, IT and Energy Industries,
Indian Institute of Technology – Delhi, New Delhi, India, January 2010.
The energy and sustainability conundrum: alternative energy solutions and reducing the carbon footprint,
plenary lecture, ASME Cincinnati Section, November 2009.
Molecular-to-macro-scale control of interfacial behavior in ebullient phase change in aqueous solutions of
reagents, 6th Interdisciplinary Transport Phenomena – Fluid, Thermal, Biological, Materials and Space
Sciences Conference, SIAF Volterra, Italy, October 2009.
Inter-element convective heat-mass transfer in hydrogen-fuelled anode-supported planar solid oxide fuel cells,
2nd Energy Center Hydrogen Initiative (ECHI-II) Symposium, Purdue University, West Lafayette, IN, April
2007.
Viscous liquid heat transfer in plate heat exchangers, Global Process Symposium, The Procter & Gamble Co.,
Covington, KY, September 2001.
The role of corrugated flow channels in promoting enhanced heat transfer in plate heat exchangers, 35th
National Heat Transfer Conference, Session Keynote, Anaheim, CA, June 2001.
Forced convection characteristics of viscous liquids in cross-corrugated channels of chevron plate heat
exchangers, Corporate Engineering UERP Symposium, Procter & Gamble Co., Cincinnati, OH, April 2001.
The influence of twisted-tape generated swirl flows on single-phase heat transfer, Mechanical Engineering
International Seminar, Indian Institute of Technology, Bombay, India, January 1994.
Invited Industrial Seminars & Academic Lectures:
Molecular-to-macro-scale modulation of interfacial behavior in boiling heat transfer: passive enhancement on
demand, University of Maryland, College Park, MD, March 2013.
The energy and sustainability conundrum: Imperatives for alternative solutions and reduced carbon footprint,
Indian Institute of Technology – Delhi, New Delhi, India, January 2012.
Raj M. Manglik
page 6 of 34
Additive adsorption and interfacial characteristics of nucleate pool boiling in aqueous surfactant solutions,
Louisiana State University, Baton Rouge, LA, March 2005.
Enhanced boiling and interfacial phenomena in surfactant solutions, Woodruff School of Mechanical
Engineering, Georgia Institute of Technology, Atlanta, GA, March 2002.
Fins, fish gills, and folklore: developments in enhanced and compact heat transfer surfaces, Woodruff School
of Mechanical Engineering, Georgia Tech., Atlanta, GA, March 2002.
The role of corrugated flow channels in promoting enhanced heat transfer in wavy plate-fin cores, Engines &
Systems, Honeywell International, Torrance, CA, June 2001.
Modeling of thermal-hydraulic characteristics of Newtonian and non-Newtonian flows in PHEs, Este Process
Technology Center, Procter & Gamble Co., Cincinnati, OH, February 1999.
Forced convection heat transfer in rheologically complex non-Newtonian fluids, Este Process Technology
Center, Procter & Gamble Co., Cincinnati, OH, March 1997.
Challenges in thermal processing of non-Newtonian fluids, Este Process Technology Center, Procter &
Gamble Co., Cincinnati, OH, January 1996.
Transport phenomena in thermal processing of non-Newtonian emulsions, Miami Valley Laboratories, Procter
& Gamble Co., Cincinnati, OH, March 1995.
The design of high pressure water/steam nozzles, Malsbary Cleaning Systems, Airtronic Inc., Cincinnati, OH,
July 1992.
Boiling characteristics of alcohol sulfate and its thermal-hydraulic performance in plate heat exchangers,
Procter & Gamble Co., Cincinnati, OH, September 1992.
Heat transfer and pressure drop in non-Newtonian process liquid flows in plate heat exchangers, Procter &
Gamble Co., Cincinnati, OH, June 1992.
Enhancement of heat transfer to intube viscous liquid flows by means of twisted-tape inserts, University of
Missouri, Rolla, MO, April 1991.
Enhancement of heat transfer to intube viscous liquid flows by means of twisted-tape inserts, University of
Illinois at Urbana-Champaign, Urbana, IL, March 1991.
Enhancement of heat transfer to intube viscous liquid flows by means of twisted-tape inserts, University of
Cincinnati, Cincinnati, OH, January 1991.
Heat transfer enhancement by means of twisted-tape inserts, Corporate Research and Development, General
Electric, Schenectady, NY, October 1990.
Heat transfer enhancement to viscous process fluids by means of twisted-tape inserts, Purdue University, West
Lafayette, IN, July 1990.
Heat transfer enhancement to viscous process fluids by means of twisted-tape inserts, Kansas State University,
Manhattan, KS, July 1990.
Heat transfer enhancement to viscous process fluids by means of twisted-tape inserts, University of
Wisconsin, Milwaukee, WI, March 1990.
Heat transfer enhancement to viscous process fluids by means of twisted-tape inserts, Creare Inc., Hanover,
NH, March 1990.
Thermal-hydraulic design of rectangular offset-strip-fin compact heat exchangers, Oak Ridge National
Laboratory, Oak Ridge, TN, September 1989.
Laminar thermal entry flows in ducts – the Graetz problem revisited, Rensselaer Polytechnic Institute, Troy,
NY, March 1988.
Raj M. Manglik
page 7 of 34
PUBLICATIONS AND SCHOLARSHIP
Over 255 publications, including books, book chapters, archival papers, and technical reports:
Books/Monographs/Book Chapters/Edited Volumes:
R.M. Manglik and F. Kreith, Principles of Heat Transfer, 8th Edition, Cengage Learning, Stamford, CT, 2017.
R.M. Manglik, Boiling in reagent and polymeric solutions, in Heat Transfer Handbook, F.A. Kulacki, Ed.,
Springer, 2017 (in press).
R.M. Manglik, Enhancement of convective heat transfer, in Heat Transfer Handbook, F.A. Kulacki, Ed.,
Springer, 2017 (in press).
R.M. Manglik, Heat transfer enhancement, in CRC Handbook of Thermal Engineering, 2nd Edition, R.P.
Chhabra, Ed., CRC Press, Boca Raton, FL, Sec. 4-16, 2017 (in press).
F. Kreith, R.M. Manglik, and M.S. Bohn, Principles of Heat Transfer, 7th Edition, Cengage Learning,
Stamford, CT, 2010-11; SI Edition (Asia), 2011.
L. Wang, B. Sundén, and R.M. Manglik, Plate Heat Exchangers: Design, Applications and Performance,
WIT Press, Southampton, UK, 2007.
R.M. Manglik and S. Gopalakrishnan, Proceedings – 2004 ASME Heat Transfer/Fluids Engineering Summer
Conference, CD-R: HT/FED2004, ASME, New York, NY, 2004.
R.M. Manglik, Heat transfer enhancement, in Heat Transfer Handbook, A. Bejan and A.D. Kraus, Eds.,
Wiley, Hoboken, NJ, Ch. 14, 2003.
R.M. Manglik and A.E. Bergles, Swirl flow heat transfer and pressure drop with twisted-tape inserts,
Advances in Heat Transfer, Vol. 36, 183-266, Academic Press, New York, NY, 2002.
R.M. Manglik, T.S. Ravigururajan, A. Muley, R.A. Papar, and J. Kim, Advances in Enhanced Heat Transfer –
2000, HTD-Vol. 365/PID-Vol. 4, ASME, New York, NY, 2000.
R.M. Manglik and A.E. Bergles, Numerical modeling and analysis of laminar flow heat transfer in non-
circular compact channels, in Computer Simulations in Compact Heat Exchangers, B. Sundén and M. Faghri,
Eds., Computational Mechanics, Southampton, UK, Ch. 2, 1998.
R.M. Manglik and A.D. Kraus, Process, Enhanced, and Multiphase Heat Transfer, Begell House, New York,
NY, 1996.
M.K. Jensen, R.M. Manglik, and T.J. Rabas, Compact Heat Exchanger Technology for the Process Industry,
Proc. 30th National Heat Transfer Conference, Vol. 12, HTD-Vol. 314, ASME, New York, NY, 1995.
R.M. Manglik and A.E. Bergles, The thermal-hydraulic design of the rectangular offset-strip-fin compact heat
exchanger, in Compact Heat Exchangers, R.K. Shah, A.D. Kraus, and D. Metzger, Eds., Hemisphere, New
York, NY, 123-159, 1990.
Journal/Archival Papers:
R.M. Manglik and D.S. Kalaikadal, Scaling and correlating the neck length of gas bubbles at detachment from
capillary-tube orifices submerged in liquid pools, Langmuir, 2017 (in review).
R.M. Manglik and A. Athavale, Pseudoplasticity effects on saturated nucleate pool boiling in aqueous
solutions of polymeric reagents, International Journal of Multiphase Flow, 2017 (in review).
D.S. Kalaikadal, R.M. Manglik, M.A. Jog, A. Subramani, and S.K. Kasimsetty, The effects of orifice diameter
and capillarity on gas bubble departure diameters, Physics of Fluids, 2017 (in review).
Raj M. Manglik
page 8 of 34
S. Rajendran, M.A. Jog, and R.M. Manglik, Experimental investigation of jet breakup at low weber number,
Atomization and Sprays, 2017 (in review).
A. Barletta, A. Bejan, A. Briggs, A. Cavallini, R. Cotta, S. Garimella, L. Glicksman, G. Hewitt, T.
Karayiannis, R. Manglik, W.J. Minkowycz, K. Sefiane, Y. Takata, J. Thome, Y. Utaka, H. Wang, and H.
Yoshida, Professor John W. Rose BScEng PhD DScEng(Lond) CEng FIMechE FASME on his 80th birthday,
International Journal of Heat and Mass Transfer, 112,169-170, 2017.
S.A. Sherif, F. Battaglia, and R.M. Manglik, In memoriam: Professor Richard H. Pletcher (1935–2015), who
advanced computational fluid mechanics and heat transfer, Journal of Fluids Engineering, 138(10), 100101
(1-3), 2016.
R.M. Manglik and M.A. Jog, Resolving the Energy-water nexus in large thermoelectric power plants: a case
for application of enhanced heat transfer and high-performance thermal energy storage, Journal of Enhanced
Heat Transfer, 23(3), 2016 (in press).
R.M. Manglik and R.J. Goldstein, Arthur E. Bergles 1935-2014, National Academy of Engineering, Memorial
Tributes, 20, 47-51, 2016.
W. Li, K. Zhou, R.M. Manglik, G.-Q. Li, and A.E. Bergles, Investigation of CaCO3 fouling in plate heat
exchangers, Heat and Mass Transfer, 52(11), 2401–2414, 2016.
S.A. Sherif, F. Battaglia, and R.M. Manglik, In memoriam: Professor Richard H. Pletcher (1935–2015), who
advanced computational fluid mechanics and heat transfer, Journal of Thermal Science and Engineering
Applications, 8(3), 030101 (1-3), 2016; Journal of Heat Transfer, 138(8), 080101 (1-3), 2016.
H.M. Metwally and R.M. Manglik, Laminar forced convection heat transfer of yield-stress shear-thinning
liquids in sinusoidal corrugated-plate channels of plate-and-frame heat exchangers, Journal of Enhanced Heat
Transfer, 22(6), 457-484, 2015.
R.M. Manglik and Y.N. Magar, Heat and mass transfer in planar anode-supported solid oxide fuel cells:
effects of interconnect fuel/oxidant channel flow cross section, Journal of Thermal Science and Engineering
Applications, 7(4), 041003 (1-10), 2015.
R.M. Manglik, Are we at a new frontier of new and transformative knowledge generation … or simply
publishing for its own sake? Journal of Enhanced Heat Transfer, 22(2), vi-viii, 2015.
Y.N. Magar and R.M. Manglik, A case study of using enhanced interconnect channel geometries on heat and
mass transfer characteristics of anode-supported planar SOFC, Journal of Enhanced Heat Transfer, 22(2),
121-145, 2015.
R.M. Manglik, M.K. Jensen, A. Bar-Cohen, and Z.H. Ayub, In memoriam: Professor Arthur E. Bergles (1935
– 2014), the pioneering advocate of enhanced heat transfer and energy conservation, Journal of Thermal
Science and Engineering Applications, 7(4), 030101 (1-2), 2015.
R.M. Manglik, M.A. Jog, S. Patnaik, S. Manoharan, D. Kalaikadal, and E. Iskrenova-Ekiert, Visualization of
multiscale processes – bubble dynamics in surface active colloids, Journal of Heat Transfer, 137(8), 080912-
1, 2015.
R.M. Manglik, Commemorating the life and times of Art Bergles (1935 – 2014): He pedaled far and wide,
made a difference … and the trail is an enriching legacy, Journal of Enhanced Heat Transfer, 21(2-3), i-iv,
2014.
R.M. Manglik, The imperative of enhancement of heat transfer wherever there is a temperature difference:
The life and legacy of Professor Arthur E. Bergles, Journal of Enhanced Heat Transfer, 21(2-3), 89-110,
2014.
R.M. Manglik, The expanding expression of enhanced heat and mass transfer, for “The times they are a-
changin’ … …,” Journal of Enhanced Heat Transfer, 21(1), v-ix, 2014.
Raj M. Manglik
page 9 of 34
R.M. Manglik, M.K. Jensen, A. Bar-Cohen, and Z.H. Ayub, In memoriam: Professor Arthur E. Bergles (1935
– 2014), the pioneering advocate of enhanced heat transfer and energy conservation, Journal of Heat Transfer,
136(12), 120101 (1-2), 2014.
R.M. Manglik and H.M. Metwally, Enhanced heat transfer in corrugated-plate channels with non-Newtonian
power-law fluid flows, Journal of Enhanced Heat Transfer, 20(4), 361–377, 2013.
R.M. Manglik, M.A. Jog, S.K. Gande, and V. Ravi, Damped harmonic system modeling of post-impact drop-
spread dynamics on a hydrophobic surface, Physics of Fluids, 25(8), 082112 (1-15), 2013.
F. Bishara, M.A. Jog, and R.M. Manglik, Heat transfer enhancement due to swirl effects in oval tubes twisted
about their longitudinal axis, Journal of Enhanced Heat Transfer, 20(4), 289–304, 2013.
V. Ravi, M.A. Jog, and R.M. Manglik, Effects of pseudoplasticity on spread and recoil dynamics of aqueous
polymeric solution droplets on solid surfaces, Interfacial Phenomena and Heat Transfer, 1(3), 273-287, 2013.
R.M. Manglik, A.E. Bergles, A.J. Dongaonkar, and S. Rajendran, Limitations of compiling the global
literature on enhanced heat and mass transfer, Journal of Enhanced Heat Transfer, 20(1), 83-92, 2013.
R.M. Manglik and A.E. Bergles, Characterization of twisted-tape induced helical swirl flows for enhancement
of forced convective heat transfer in single-phase and two-phase flows, Journal of Thermal Science and
Engineering Applications, 5(2), 021010(1-12), 2013.
S. Rajendran, D.S. Kalaikadal, and R.M. Manglik, Characterization and prediction of swirl-induced enhanced
heat transfer in sinusoidal-corrugated plates, ASHRAE Transactions, 119(2), DE-13-C059 (1-8), 2013.
A.E. Bergles and R.M. Manglik, Current progress and new developments in enhanced heat and mass transfer,
Journal of Enhanced Heat Transfer, 20(1), 1-15, 2013.
R.M. Manglik, The enduring relevance of enhanced heat and mass transfer, Journal of Enhanced Heat
Transfer, 20(1), i-iii, 2013.
R.M. Manglik, Editorial: Enhanced heat transfer in energy conservation and pollution control, Journal of
Enhanced Heat Transfer, 19(6), 1, 2012.
A.D. Athavale, R.M. Manglik, and M.A. Jog, An experimental investigation of nucleate pool boiling in
aqueous solutions of a polymer, AIChE Journal, 58(3), 668-677, 2012.
P. Patel, R.M. Manglik, and M.A. Jog, Swirl-enhanced forced convection through axially twisted rectangular
ducts – part 1, fluid flow, Journal of Enhanced Heat Transfer, 19(5), 423-436, 2012.
R.M. Manglik, P. Patel, and M.A. Jog, Swirl-enhanced forced convection through axially twisted rectangular
ducts – part 2, heat transfer, Journal of Enhanced Heat Transfer, 19(5), 437-450, 2012.
R.M. Manglik, Editorial: International workshop on heat transfer advances for energy conservation and
pollution control, Journal of Enhanced Heat Transfer, 19(5), 453-454, 2012.
R.J. Goldstein, E.M. Sparrow, W.J. Minkowycz, A.S. Wanni, T.M. Rudy, M.A. Kedzierski, N.-H. Kim, W.
Li, T. Adamek, K.W. Menze, R.M. Manglik, S.K. Saha, and A.E. Bergles, In memoriam - Professor Ralph L.
Webb (1934–2011), International Journal of Heat and Mass Transfer, 55(4), 513–514, 2012.
R.M. Manglik, Molecular-to-macro-scale control of interfacial behavior in ebullient phase change in aqueous
solutions of reagents, International Journal of Transport Phenomena, 12(3-4), 229-243, 2011.
R.M. Manglik, O.A. Huzayyin, and M.A. Jog, Fin effects in flow channels of plate-fin compact heat
exchanger cores, Journal of Thermal Science and Engineering Applications, 3(4), 041004(1-9), 2011.
R.M. Manglik, A.E. Bergles, M.A. Kedzierski, and T.M. Rudy, In memoriam: Professor Ralph L. Webb (1934
– 2011), Journal of Enhanced Heat Transfer, 18(4), i-ii, 2011.
Raj M. Manglik
page 10 of 34
S. Vyas, R.M. Manglik, and M.A. Jog, Visualization and characterization of lateral swirl flow structure in
sinusoidal corrugated-plate channels, Journal of Flow Visualization and Image Processing, 17(4), 281-296,
2010.
O.A. Huzayyin, R.M. Manglik, and M.A. Jog, Extended results for fully-developed laminar forced convection
heat transfer in trapezoidal channels of plate-fin exchangers, Journal of Thermal Science and Engineering
Applications, 2(4), 044501(1-6), 2010.
R.M. Manglik, A. Bar-Cohen, M.K. Jensen, T.S. Ravigururajan, W.C. Salmon, R.D.M. de Carvalho, D.L.
Belden, and W.J. Minkowycz, In celebration of the seventy-fifth birthday of Professor Arthur E. Bergles,
International Journal of Heat and Mass Transfer, 53(21-22), 4341-4342, 2010.
O.A. Huzayyin, M.A. Jog, and R.M. Manglik, Low Reynolds number air-flow heat transfer in trapezoidally
corrugated perforated plate-fin ducts, ASHRAE Transactions, 116(2), 339-346, 2010.
M.A. Jog and R.M. Manglik, Recent research in molecular-to-large-scale heat transfer with multiphase
interfaces and their applications, editorial, Journal of Heat Transfer, 131(12), 120301-1, 2009.
R.M. Manglik and M.A. Jog, Molecular-to-large-scale heat transfer with multiphase interfaces: current status
and new directions, Journal of Heat Transfer, 131(12), 121001(1-11), 2009.
K.P. Gatne, M.A. Jog, and R.M. Manglik, Surfactant-induced modification of low Weber number droplet
impact dynamics, Langmuir, 25(14), 8122-8130, 2009.
F. Bishara, M.A. Jog, and R.M. Manglik, Computational simulation of swirl enhanced flow and heat transfer
in a twisted oval tube, Journal of Heat Transfer, 131(8), 080902-1, 2009.
A. Sanjeev, O. Huzayyin, K.P. Gatne, R.M. Manglik, and M.A. Jog, Short time impact and cooling of water
droplets impinging on hydrophobic and hydrophilic surfaces, Journal of Heat Transfer, 130(8), 080903-1,
2008.
A. Subramani, M.A. Jog, and R.M. Manglik, Air-water ebullience systems: visualizing single bubble to wave
instability signatures, Journal of Heat Transfer, 130(8), 080905-1, 2008.
K.P. Gatne, R.M. Manglik, and M.A. Jog, Visualization of fracture dynamics of droplet recoil on hydophobic
surface, Journal of Heat Transfer, 129(8), 931, 2007.
Y.N. Magar and R.M. Manglik, Modeling of convective heat and mass transfer characteristics of anode-
supported planar solid oxide fuel cells, Journal of Fuel Cells Science and Technology, 4(2), 185-193, 2007.
K.K. Yerra, R.M. Manglik, and M.A. Jog, Optimization of heat transfer enhancement in single-phase tubeside
flows with twisted-tape inserts, International Journal of Heat Exchangers, 8(1), 117-138, 2007.
R.M. Manglik, On the advancements in boiling, two-phase flow heat transfer, and interfacial phenomena,
Journal of Heat Transfer, 128(12), 1237-1242, 2006.
R.M. Manglik, M.A. Jog, A. Subramani, and K. Gatne, Mili-scale visualization of bubble growth-translation
and droplet impact dynamics, Journal of Heat Transfer, 128(8), 736, 2006.
R.M. Manglik, J.P. Hartnett, and W.J. Minkowycz, Professor Arthur E. Bergles on his 70th Birthday,
International Journal of Heat and Mass Transfer, 49(3-4), 447-448, 2006.
Juntao Zhang and R.M. Manglik, Additive adsorption and interfacial characteristics of nucleate pool boiling
in aqueous surfactant solutions, Journal of Heat Transfer, 127(7), 684-691, 2005.
Juntao Zhang and R.M. Manglik, Nucleate pool boiling of aqueous polymer solutions on a cylindrical heater,
Journal of Non-Newtonian Fluid Mechanics, 125(2-3), 185-196, 2005.
R.M. Manglik, Jiehai Zhang, and A. Muley, Low Reynolds number forced convection in three-dimensional
wavy-plate-fin compact channels: Fin density effects, International Journal of Heat and Mass Transfer, 48(8),
1439-1449, 2005.
Raj M. Manglik
page 11 of 34
S. Vyas, Jiehai Zhang, and R.M. Manglik, Steady recirculation and laminar forced convection in a sinusoidal
wavy channel, Journal of Heat Transfer, 126(4), 500, 2004.
Juntao Zhang and R.M. Manglik, Effect of ethoxylation and molecular weight of cationic surfactants on
nucleate boiling in aqueous solutions, Journal of Heat Transfer, 126(1), 34-42, 2004.
H.M. Metwally and R.M. Manglik, Enhanced heat transfer due to curvature-induced lateral vortices in laminar
flows in sinusoidal corrugated-plate channels, International Journal of Heat and Mass Transfer, 47(10-11),
2283-2292, 2004.
R.M. Manglik and A.E. Bergles, Enhanced heat and mass transfer in the new millennium: a review of the
2001 literature, Journal of Enhanced Heat Transfer, 11(2), 87-118, 2004.
Jiehai Zhang, J. Kundu, and R.M. Manglik, Effect of fin waviness and spacing on the lateral vortex structure
and laminar heat transfer in wavy-plate-fin cores, International Journal of Heat and Mass Transfer, 47(8-9),
1719-1730, 2004.
R.M. Manglik and R.L. Webb, Professor Paul J. Marto: On the occasion of his 65th birthday, Journal of
Enhanced Heat Transfer, 11(1), vi-vii, 2004.
V.M. Wasekar and R.M. Manglik, Short-time-transient surfactant dynamics and Marangoni convection around
boiling nuclei, Journal of Heat Transfer, 125(5), 858-866, 2003.
Juntao Zhang and R.M. Manglik, Visualization of ebullient dynamics in aqueous surfactant solutions, Journal
of Heat Transfer, 125(4), 547, 2003.
Juntao Zhang and R.M. Manglik, Computational simulation of a single boiling bubble in water,
Computational Fluid and Solid Mechanics 2003, Elsevier, 2, 1592-1596, 2003.
P. Fang and R.M. Manglik, The influence of inner cylinder rotation on laminar axial flows in eccentric annuli
of drilling bore wells, International Journal of Transport Phenomena, 4(4), 257-274, 2002.
R.M. Manglik and P. Fang, Thermal processing of viscous non-Newtonian fluids in annular ducts: Effects of
power-law rheology, duct eccentricity, and thermal boundary conditions, International Journal of Heat and
Mass Transfer, 45(4), 803-814, 2002.
V.M. Wasekar and R.M. Manglik, The influence of additive molecular weight and ionic nature on the pool
boiling performance of aqueous surfactant solutions, International Journal of Heat and Mass Transfer, 45(3),
483-493, 2002.
A. Muley, J. Borghese, R.M. Manglik, and J. Kundu, Experimental and numerical investigation of thermal-
hydraulic characteristics of wavy-channel compact heat exchanger, Heat Transfer, 4, SFT, 417-422, 2002.
R.M. Manglik, S. Maramraju, and A.E. Bergles, The scaling and correlation of low Reynolds number swirl
flows and friction factors in circular tubes with twisted-tape inserts, Journal of Enhanced Heat Transfer, 8(6),
383-395, 2001.
R.M. Manglik, V.M. Wasekar, and J. Zhang, Dynamic and equilibrium surface tension of aqueous surfactant
and polymeric solutions, Experimental Thermal and Fluid Science, 25(1-2), 55-64, 2001.
V.M. Wasekar and R.M. Manglik, Computation of Marangoni convection at the vapor-liquid interface in
aqueous surfactant solutions, Computational Fluid and Solid Mechanics 2001, Elsevier, 2, 1412-1416, 2001.
R.M. Manglik, A pioneer, advocate and articulator of the science and engineering of enhanced heat transfer:
Professor Arthur E. Bergles on his 65th birthday, Journal of Enhanced Heat Transfer, 8(2), 73-76, 2001.
V.M. Wasekar and R.M. Manglik, Pool boiling heat transfer in aqueous solutions of an anionic surfactant,
Journal of Heat Transfer, 122(4), 708-715, 2000.
A. Muley and R.M. Manglik, Enhanced thermal-hydraulic performance optimization of chevron plate heat
exchangers, International Journal of Heat Exchangers, 1(1), 3-18, 2000.
Raj M. Manglik
page 12 of 34
A. Muley, R.M. Manglik, and H.M. Metwally, Enhanced heat transfer characteristics of viscous liquid low
Reynolds number flows in a chevron plate heat exchanger, Journal of Heat Transfer, 121(4), 1011-1017,
1999.
R. Sadasivam, R.M. Manglik, and M.A. Jog, Fully developed forced convection through trapezoidal and
hexagonal ducts, International Journal of Heat and Mass Transfer, 42(23), 4321-4331, 1999.
V.M. Wasekar and R.M. Manglik, A review of enhanced heat transfer in nucleate pool boiling of aqueous
surfactant and polymeric solutions, Journal of Enhanced Heat Transfer, 6(2-4), 135-150, 1999.
R.M. Manglik, Editorial, special issue dedicated to the 65th birthday of Professor Ralph L. Webb, Journal of
Enhanced Heat Transfer, 6 (2-4), i, 1999.
P. Fang, R.M. Manglik, and M.A. Jog, Characteristics of laminar viscous shear-thinning flows in eccentric
annular channels, Journal of Non-Newtonian Fluid Mechanics, 84(1), 1-17, 1999.
A. Muley and R.M. Manglik, Experimental study of turbulent flow heat transfer and pressure drop in a plate
heat exchanger with chevron plates, Journal of Heat Transfer, 121(1), 110-117, 1999.
T.M. Harms, M.A. Jog, and R.M. Manglik, Effect of temperature-dependent viscosity variations and boundary
conditions on fully developed laminar forced convection in a semi-circular duct, Journal of Heat Transfer,
120(3), 600-605, 1998.
R.M. Manglik, Pool boiling characteristics of high concentration aqueous surfactant emulsions, Heat
Transfer, 2, KSME, 449-453, 1998.
A. Muley and R.M. Manglik, Enhanced heat transfer characteristics of single-phase flows in a plate heat
exchanger with mixed chevron plates, Journal of Enhanced Heat Transfer, 4(3), 187-201, 1997.
R.M. Manglik and J. Ding, Laminar flow heat transfer to viscous power-law fluids in double-sine ducts,
International Journal of Heat and Mass Transfer, 40(6), 1379-1390, 1997.
R.M. Manglik and A.E. Bergles, Experimental investigation of turbulent flow heat transfer in horizontal
concentric annular ducts, Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 3, 1393-1400,
1997.
R.M. Manglik and C. Ranganathan, Visualization of swirl flows generated by twisted-tape inserts in circular
tubes, Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 3, 1631-1636, 1997.
J. Ding and R.M. Manglik, Analytical solutions for laminar fully developed flows in double-sine shaped
ducts, Heat and Mass Transfer (Wärme- und Stoffübertragung), 31(4), 269-277, 1996.
R.M. Manglik, Plate heat exchangers for process industry applications: Enhanced thermal-hydraulic
characteristics of chevron plates, Process, Enhanced and Multiphase Heat Transfer, Begell, 267-276, 1996.
R.M. Manglik and A.E. Bergles, Thermally developing laminar flows in circular-segment ducts with uniform
wall temperature, Transport Phenomena in Thermal-Fluids Engineering, 2, 831-836, 1996.
M.K. Jensen, R.M. Manglik, A. Bar-Cohen, J.P. Hartnett, and W.J. Minkowycz, Professor Arthur E. Bergles
on his 60th birthday, International Journal of Heat and Mass Transfer, 39, 2007-2008, 1996.
R.M. Manglik and J. Prusa, Viscous dissipation in non-Newtonian flows: Implications for the Nusselt number,
Journal of Thermophysics and Heat Transfer, 9(4), 733-742, 1995.
R.M. Manglik and P.P. Fang, Effects of eccentricity and thermal boundary conditions on laminar fully
developed flow in annular ducts, International Journal of Heat and Fluid Flow, 16(4), 298-306, 1995.
A. Muley and R.M. Manglik, Experimental investigation of heat transfer enhancement in a PHE with = 60
chevron plates, Heat and Mass Transfer 95, Tata McGraw-Hill, 737-744, 1995.
R.M. Manglik and A.E. Bergles, Heat transfer and pressure drop correlations for the rectangular offset-strip-
fin compact heat exchanger, Experimental Thermal and Fluid Science, 10(2), 171-180, 1995.
Raj M. Manglik
page 13 of 34
R.M. Manglik and A.E. Bergles, Fully developed laminar heat transfer in circular-segment ducts with uniform
wall temperature, Numerical Heat Transfer, A 26(5), 499-519, 1994.
J. Prusa and R.M. Manglik, Asymptotic and numerical solutions for thermally developing flows of Newtonian
and non-Newtonian fluids in circular tubes, Numerical Heat Transfer, A 26(2), 199-217, 1994.
R.M. Manglik and P.P. Fang, Second-law analysis of heat transfer enhancement in offset-strip-fin compact
heat exchangers, Heat Transfer, 6, I.Chem.E., 67-72, 1994.
R.M. Manglik and A.E. Bergles, Influence of twisted tape generated swirl on single-phase heat transfer, Heat
and Mass Transfer 94, Tata McGraw-Hill, 249-256, 1994.
R.M. Manglik and A.E. Bergles, Heat transfer and pressure drop correlations for twisted-tape inserts in
isothermal tubes: Part I – laminar flows, Journal of Heat Transfer, 115(4), 881-889, 1993.
R.M. Manglik and A.E. Bergles, Heat transfer and pressure drop correlations for twisted-tape inserts in
isothermal tubes: Part II – transition and turbulent flows, Journal of Heat Transfer, 115(4), 890-896, 1993.
S. Polat, R.M. Manglik, and R.L. Wilkins, Forced convective boiling of a non-Newtonian liquid in a multipass
plate heat exchanger, AIChE Symposium Series, 89(295), 229-235, 1993.
R.M. Manglik and A.E. Bergles, Heat transfer enhancement and pressure drop in viscous liquid flows in
isothermal tubes with twisted-tape inserts, Wärme- und Stoffübertragung, 27, 249-257, 1992.
R.M. Manglik and A.E. Bergles, The thermal-hydraulic design of the rectangular offset-strip-fin compact heat
exchanger, Compact Heat Exchangers, Hemisphere, 123-159, 1990.
R.M. Manglik, A.E. Bergles, and S.D. Joshi, Augmentation of heat transfer to laminar flow of non-Newtonian
fluids in uniformly heated tubes with twisted-tape inserts, Experimental Heat Transfer, Fluid Mechanics and
Thermodynamics, Elsevier, 676-684, 1988.
R.M. Manglik and A.E. Bergles, Laminar flow heat transfer in a semi-circular tube with uniform wall
temperature, International Journal of Heat and Mass Transfer, 31(3), 625-636, 1988.
R.M. Manglik and A.E. Bergles, A correlation for laminar flow enhanced heat transfer in uniform wall
temperature circular tubes with twisted-tape inserts, Advances in Enhanced Heat Transfer, HTD-Vol. 68, 19-
25, 1987.
Papers in Refereed/Archival Proceedings Volumes:
R.M. Manglik, On scaling and correlating asymptotic behavior in complex convective fields – the enduring
legacy of Stuart Churchill, Proc. AIChE-ASME Churchill Memorial Symposium, HT2017-5178, Bellevue,
WA, July 2017.
C.C. Bhave, R.M. Manglik, and M.A. Jog, Computational study of enhanced convection and effects of
geometrical features in offset strip fin cores, Proc. ASME Summer Heat Transfer Conference, HT2017- 4754,
Bellevue, WA, July 2017.
S. Manoharan, M.A. Jog, and R.M. Manglik, Effects of liquid viscosity on bubble growth from submerged
orifice plates, Proc. ASME Summer Heat Transfer Conference, HT2017-4885, Bellevue, WA, July 2017.
K.P. Mercado, D.S. Kalaikadal, J.N. Lorenz, R.M. Manglik, C.K. Holland, A.N. Redington, and K.J.
Haworth, Effect of diluent fluid viscosity on acoustic droplet vaporization-mediated pO2 reduction, Proc.
173rd Meeting of the Acoustical Society of America, Boston, MA, 25-29 June 2017.
C.C. Bhave, S. Madhavan, M.A. Jog, and R.M. Manglik, Computational study of laminar flow heat transfer
characteristics of offset strip fin channels, Proc. ASHRAE Winter Conference & AHR Expo, Paper No. 21131,
Las Vegas, NV, January 2017
Raj M. Manglik
page 14 of 34
D. Shi, M.A. Jog, and R.M. Manglik, Correlating swirl behavior in low Reynolds number flows in wavy-fin
heat exchanger, Proc. ASHRAE Winter Conference & AHR Expo, Paper No. 21055, Las Vegas, NV, January
2017.
S. Manoharan, M.A. Jog, and R.M. Manglik, Visual observations of chamber volume effect on ebullience
from submerged orifice plates, Proc. ASME Heat Transfer, Fluids Engineering, & Nanochannels,
Microchannels, and Minichannels Conference, Paper No. HTFEICNMM2016-1014, Washington, DC, July
2016.
S. Manoharan, M.A. Jog, and R.M. Manglik, Experimental investigation of surface wettability effect on
bubble growth from submerged plate-orifices, Proc. ASME 2015 IMECE, Paper No. IMECE2015-51758,
Houston, TX, November 2015
S. Rajendran, M.A. Jog, and R.M. Manglik, Numerical analysis of liquid breakup and drop generation in low
velocity jets, Proc. ASME 2015 IMECE, Paper No. IMECE2015-51750, Houston, TX, November 2015.
D.S. Kalaikadal, M.A. Jog, and R.M. Manglik, Transient thermocapillary convection around a vapor bubble in
a liquid pool: a numerical investigation, Proc. 1st Thermal and Fluid Engineering Summer Conference, Paper
No. TFESC-13329, New York, NY, August 2015.
S. Rajendran, M.A. Jog, and R.M. Manglik, Splashing of a drop impacting on a thin liquid film, Proc. 27th
Annual Conference on Liquid Atomization and Spray Systems, Paper No. ILASS2015-011, Raleigh, NC, May
2015.
S. Manoharan, D.S. Kalaikadal, R.M. Manglik, M.A. Jog, E. Iskrenova-Ekiert, and S.S. Patnaik, Visualization
of multiscale processes – bubble dynamics in surface active colloids, Proc. ASME 2014 IMECE, Paper No.
IMECE2014-40644, 2014.
D.S. Kalaikadal, R.M. Manglik, and M.A. Jog, Experimental study of effects of dynamic surface tension on
bubble growth dynamics, Proc. ASME 2013 IMECE, Paper No. IMECE2013-64800, 2013.
A. Deodhar, M.A. Jog, and R.M. Manglik, Computational modeling of bubble growth dynamics in pool
boiling, Proc. ASME Summer Heat Transfer Conference, Paper No. HT2013-17444, 2013.
A. Dongaonkar, R.M. Manglik, and M.A. Jog, Computational modeling of enhanced laminar flow convection
heat transfer in circular tubes with helical core fins, Proc. ASME Summer Heat Transfer Conference, Paper
No. HT2013-17407, 2013.
S. Rajendran, D.S. Kalaikadal, and R.M. Manglik, Characterization and prediction of swirl-induced enhanced
heat transfer in sinusoidal-corrugated plates, Proc. 2013 ASHRAE Annual Conference, Paper No. DE-13-
C059, 2013.
A.E. Bergles and R.M. Manglik, Current progress in enhanced heat and mass transfer, Proc. ASME 2012
Summer Heat Transfer Conference, Paper No. HT2012-58457, 2012.
R.M. Manglik, M.A. Jog, and P. Patel, Enhanced laminar flow convection heat transfer in longitudinally
twisted rectangular ducts, Proc. ASME 2012 Summer Heat Transfer Conference, Paper No. HT2012-58304,
2012.
A.E. Bergles and R.M. Manglik, Enhanced heat transfer in single-phase forced convection in tubes due to
helical swirl generated by twisted-tape inserts, Proc. ASME 2012 Summer Heat Transfer Conference, Paper
No. HT2012-58285, 2012.
S. Rajendran, R.M. Manglik, and M.A. Jog, Experimental investigation of liquid jet breakup at low Weber
number, Proc. 24th Annual Conference on Liquid Atomization and Spray Systems, Paper No. ILASS2012-033,
2012.
R. Bhatia, R.M. Manglik, and M.A. Jog, Effect of concentration and temperature on the rheological properties
of aqueous polymeric solutions, Proc. 10th ISHMT-ASME Heat and Mass Transfer Conference, Paper No.
ISHMT USA-017, 2011.
Raj M. Manglik
page 15 of 34
A. Deodhar, M.A. Jog, and R.M. Manglik, Computational study of adiabatic bubble growth dynamics from
submerged orifices in aqueous solutions of surfactants, Proc. 10th ISHMT-ASME Heat and Mass Transfer
Conference, Paper No. ISHMT USA-016, 2011.
U. Verma, R.M. Manglik, and M.A. Jog, Experimental study of effects of interfacial properties on nucleate
pool boiling in water, Proc. ASME – IMECE 2011, Paper No. IMECE2011-62740, 2011.
A.E. Bergles and R.M. Manglik, Swirl flow and enhanced heat transfer characteristics of single-phase forced
convection tubes with twisted-tape inserts, 4th International Conference Heat and Mass Transfer and
Hydrodynamics in Swirling Flows, Moscow, Russia, October 2011.
V. Ravi, M.A. Jog, and R.M. Manglik, Post-impact spread-recoil behavior of non-Newtonian liquid droplets,
Proc. 23rd Annual Conference on Liquid Atomization and Spray Systems, Paper No. ILASS2011-181, 2011.
M.A. Jog and R.M. Manglik, Experimental investigation of low Weber number post-impact drop spreading on
solid substrates, Proc. International Heat Transfer Conference – IHTC14, Paper No. IHTC14-23251, 2010.
O.A. Huzayyin, M.A. Jog, and R.M. Manglik, Low Reynolds number air-flow heat transfer in trapezoidally
corrugated perforated plate-fin ducts, Proc. 2010 ASHRAE Annual Conference, Paper No. AB-10-C036, 2010.
V. Ravi, M.A. Jog, and R.M. Manglik, Effects of interfacial and viscous properties of liquids on drop spread
dynamics, Proc. 22nd Annual Conference of the Institute of Liquid Atomization and Spray Systems, Paper No.
ILASS2010-142, 2010.
R.M. Manglik, Interfacial phenomena in nucleate pool boiling of water: their role and manipulation by
molecular dynamics of surface-active additives, Proc. 9th ISHMT-ASME Heat and Mass Conference, Mumbai,
India, January 2010.
R.M. Manglik, Enhanced heat transfer and compact exchangers: Challenges for a sustainable world, Advances
in Small Scale Heat Exchangers & Fuel Cell Thermal Management for Process, IT and Energy Industries,
Indian Institute of Technology – Delhi, New Delhi, India, January 2010.
O.A. Huzayyin, M.A. Jog, and R.M. Manglik, Computational modeling of convective heat transfer in
converging-diverging plate channels with fin-wall perforation, Proc. ASME – IMECE, ASME, New York,
NY, Paper No. IMECE2009-12416, 2009.
F. Bishara, M.A. Jog, and R.M. Manglik, Heat transfer and pressure drop of periodically fully developed
swirling laminar flows in twisted tubes with elliptical cross sections, Proc. ASME – IMECE, ASME, New
York, NY, Paper No. IMECE2009-11285, 2009.
R.M. Manglik, Molecular-to-macro-scale control of interfacial behavior in ebullient phase change in aqueous
solutions of reagents, Proc. Interdisciplinary Transport Phenomena VI: Fluid, Thermal, Biological, Materials
and Space Sciences, Volterra, Italy, Paper No. ITP-09-35, 2009.
A. Ariyo, M.A. Jog, and R.M. Manglik, Droplet impact dynamics of aqueous polymeric solutions, Proc. 11th
Triennial International Annual Conference on Liquid Atomization and Spray Systems, Vail, Colorado, Paper
No. ICLASS2009-066, 2009.
P.P. Venkata, M.A. Jog, and R.M. Manglik, Computational modeling of planar SOFC: effects of volatile
species/oxidant mass flow rate and electrochemical reaction rate, Proc. ASME – IMECE, ASME, New York,
NY, Paper No. IMECE2008-69249, 2008.
S.K. Kasimsetty, R.M. Manglik, and M.A. Jog, Computational modeling of dynamics of single bubbles
emanating from capillary-tube orifice in an isothermal liquid pool, Proc. ASME – IMECE, ASME, New York,
NY, Paper No. IMECE2008 – 69251, 2008.
F. Bishara, M.A. Jog, and R.M. Manglik, Swirl enhanced flow and heat transfer in a twisted oval tube, Proc.
ASME – IMECE, HTD-Photo Gallery, 2008.
Raj M. Manglik
page 16 of 34
A. Sanjeev, M.A. Jog, and R.M. Manglik, Computational simulation of surfactant-induced interfacial
modification of droplet impact and heat transfer, Proc. ILASS Americas, 21st Annual Conference on Liquid
Atomization and Spray Systems, Paper No. W2-B-2, 2008.
Y.N. Magar, R.M. Manglik, and M.A. Jog, Characterization of electrochemically-induced heat and mass
transfer in the interconnect channels of a planar solid oxide fuel cell, Proc. ASME – IMECE, HTD-Photo
Gallery, 2007.
A. Subramani, M.A. Jog, and R.M. Manglik, Experimental study of single-bubble dynamics in isothermal
liquid pools: effects of fluid properties, orifice diameter and flow rate, Proc. ASME – IMECE, ASME, New
York, NY, Paper No. IMECE2007-43442, 2007.
A. Subramani, S.K. Kasimsetty, R.M. Manglik and M.A. Jog, Computational and experimental
characterization of single bubble dynamics in isothermal liquid pools, Proc.5th Joint ASME – JSME Fluids
Engineering Conference, ASME, New York, Paper No. FEDSM2007-37711.
A. Sanjeev, O. Huzayyin, K.P. Gatne, R.M. Manglik, and M.A. Jog, Impact dynamics and cooling of water
droplets impinging on hydrophobic and hydrophilic surfaces, Proc. ASME – JSME Thermal Engineering
Summer Heat Transfer Conference, Vancouver, Canada, HTD-Photo Gallery, 2007.
A. Subraman, M.A. Jog, and R.M. Manglik, Air-water ebullience systems: Visualizing single bubble to wave
instability signatures, Proc. ASME – JSME Thermal Engineering Summer Heat Transfer Conference,
Vancouver, Canada, HTD-Photo Gallery, 2007.
K.P. Gatne, R.M. Manglik, and M.A. Jog, Molecular-scale reagent transport-induced modification of low
Weber number droplet impact dynamics, Proc. ASME – JSME Thermal Engineering Summer Heat Transfer
Conference, ASME, New York, Paper No. HT2007-32087, 2007.
S.K. Kasimsetty, A. Subramani, R.M. Manglik and M.A. Jog, Theoretical modeling and experimental
measurements of single bubble dynamics from a submerged orifice in a liquid pool, Proc. ASME – JSME
Thermal Engineering Summer Heat Transfer Conference, ASME, New York, Paper No. HT2007-32088,
2007.
A. Sanjeev, O. Huzayyin, K.P. Gatne, R.M. Manglik, and M.A. Jog, Impact dynamics and cooling of water
droplets impinging on hydrophobic and hydrophilic surfaces, Proc. ILASS America, 20th Annual Conference
on Liquid Atomization and Spray Systems, Paper No. 36, 2007.
A. Sanjeev, K.P. Gatne, R.M. Manglik, and M.A. Jog, Experiments and simulations of spreading, impact and
recoil of surfactant solution droplets on a hydrophobic surface, Proc. ILASS America, 20th Annual Conference
on Liquid Atomization and Spray Systems, Paper No. 35, 2007.
K.P. Gatne, R.M. Manglik, and M.A. Jog, Visualization of fracture dynamics of droplet recoil on hydophobic
surface, Proc. ASME – IMECE, Chicago, IL, Nov. 5-10, HTD-Photo Gallery, 2006.
R.M. Manglik, M.A. Jog, and Y. Liu, Linkage between learning styles and design engineering perceptions of
undergraduate students, Proc. ASME – IMECE, ASME, New York, Paper No. IMECE2006-15597, 2006.
K.P. Gatne, M.A. Jog, and R.M. Manglik, Experimental investigation of droplet dynamics on solid surfaces:
spreading and recoil effects, Proc. ASME – IMECE, ASME, New York, Paper No. IMECE2006-14699, 2006.
Y.N. Magar, R.M. Manglik, M.A. Jog, Influence of interconnect-channel shape on heat and mass transfer in
anode-supported planar solid oxide fuel cells, Proc. ASME – IMECE, ASME, New York, Paper No.
IMECE2006-13779, 2006.
A. Muley, J.B. Borghese, S.L. White, and R.M. Manglik, Enhanced thermal-hydraulic performance of a wavy-
plate-fin compact heat exchanger: effect of corrugation severity, Proc. ASME – IMECE, ASME, New York,
Paper No. IMECE2006-14755, 2006.
Raj M. Manglik
page 17 of 34
Y.N. Magar and R.M. Manglik, Thermal and hydrodynamic modeling of fully-developed convection in anode-
supported planar solid oxide fuel cells, Proc. ASME – IMECE, ASME, New York, Paper No. IMECE2005-
79986, 2005.
R.M. Manglik, M.A. Jog, A. Subramani, and K. Gatne, Mili-scale visualization of bubble growth-translation
and droplet impact dynamics, Proc. ASME – IMECE, HTD-Photo Gallery, 2004.
Juntao Zhang and R.M. Manglik, Characterization of nucleate pool boiling in aqueous surfactant solutions on
a cylindrical heater, 3rd International Symposium on Two-Phase Flow Modeling and Experimentation, Pisa,
Italy, September 22-24, 2004.
S. Sethu Raghavan and R.M. Manglik, Visualization of micro-scale bubble dynamics in pure liquids and
aqueous surfactant solutions, Proc. 2004 ASME Heat Transfer/Fluids Engineering Summer Conference,
ASME, New York, Paper No. HT-FED2004-56858, 2004.
S. Vyas, Jiehai Zhang, and R.M. Manglik, Steady recirculation and laminar forced convection in a sinusoidal
wavy channel, Proc. 2003 ASME – IMECE, HTD-Photo Gallery, 2003.
Juntao Zhang, R.M. Manglik, and M. Bahl, Nucleate pool boiling of a surface active polymer (HEC) solution,
Proc. 2003 ASME – IMECE, ASME, New York, Paper No. IMECE2003-42311, 2003.
Juntao Zhang and R.M. Manglik, Numerical investigation of single bubble dynamics during nucleate boiling
in aqueous surfactant solutions, Proc. 2003 ASME Summer Heat Transfer Conference, ASME, New York,
Paper No. HTD2003-47047, 2003.
M. Bahl, Juntao Zhang, and R.M. Manglik, Measurement of dynamic and equilibrium surface tension of
surfactant solutions by the maximum bubble pressure method, Proc. 2003 ASME Summer Heat Transfer
Conference, ASME, New York, Paper No. HTD2003-47137, 2003.
Jiehai Zhang, A. Muley, J.B. Borghese, and R.M. Manglik, Computational and experimental study of
enhanced laminar flow heat transfer in three-dimensional sinusoidal wavy-plate-fin channels, Proc. 2003
ASME Summer Heat Transfer Conference, ASME, New York, HTD2003-40148, 2003.
Juntao Zhang and R.M. Manglik, Computational simulation of a single boiling bubble in water Proc. 2nd MIT
Conference on Computational Fluid and Solid Mechanics, Vol. 2, Elsevier, Amsterdam, 1592-1596, 2003.
Juntao Zhang and R.M. Manglik, Pool boiling heat transfer in aqueous solutions of cationic surfactants, Proc.
6th ASME – JSME Thermal Engineering Joint Conference, ASME, New York, Paper No. TED-AJ03-248,
2003.
Jiehai Zhang, J. Kundu, and R.M. Manglik, Computational simulation of lateral vortex structure and enhanced
laminar forced convection in wavy-plate channels, Proc. 6th ASME – JSME Thermal Engineering Joint
Conference, ASME, New York, Paper No. TED-AJ03-132, 2003.
Juntao Zhang and R.M. Manglik, Visualization of ebullient dynamics in aqueous surfactant solutions, Proc. of
the 2002 ASME-IMECE, HTD-Photo Gallery, 2002.
H.M. Metwally and R.M. Manglik, Computational modeling of enhanced laminar flow heat transfer in
viscoplastic fluids in corrugated-plate channels, Proc. of the 2002 ASME-IMECE, 1, ASME, New York, Paper
No. IMECE2002-33631, 2002.
A. Muley, J. Borghese, R.M. Manglik, and J. Kundu. Experimental and numerical investigation of thermal-
hydraulic characteristics of wavy-channel compact heat exchanger, Proc. of the 12th International Heat
Transfer Conference, Vol. 4, Société Française des Thermiciens & Elsevier, France, 417-422, 2002.
Jiehai Zhang, R.M. Manglik, A. Muley, and J. Borghese, Three-dimensional numerical simulation of laminar
forced convection in wavy plate-fin channels, Proc. 13th International Symposium on Transport Phenomena,
Victoria, BC, Canada, July 2002.
Raj M. Manglik
page 18 of 34
V.M. Wasekar, J. Zhang, and R.M. Manglik, Experimental investigation of dynamic and equilibrium surface
tension characteristics of aqueous surfactant solutions, Proc. 5th World Conf. on Experimental Heat Transfer,
Fluid Mechanics and Thermodynamics, Thessaloniki, Greece, September 24-28, 2001.
V.M. Wasekar and R.M. Manglik, Computation of Marangoni convection at the vapor-liquid interface in
aqueous surfactant solutions, Proc. 1st MIT Conference on Computational Fluid and Solid Mechanics, Vol. 2,
Elsevier, Amsterdam, 1412-1416, 2001.
R.M. Manglik, The role of corrugated flow channels in promoting enhanced heat transfer in plate heat
exchangers, 35th National Heat Transfer Conference, Anaheim, CA, June 2001.
H.M. Metwally and R.M. Manglik, A computational study of enhanced heat transfer in laminar flows of non-
Newtonian fluids in corrugated-plate channels, Advances in Enhanced Heat Transfer, HTD-Vol. 365/PID-
Vol. 4, ASME, New York, 41-48, 2000.
V.M. Wasekar and R.M. Manglik, Numerical investigation of Marangoni convection around a vapor bubble in
aqueous surfactant solutions, Proc. of the ASME Heat Transfer Division (IMECE), HTD-Vol. 366-4, pp. 283-
291, 2000.
H.M. Metwally and R.M. Manglik, Numerical solutions for periodically-developed laminar flow and heat
transfer in sinusoidal corrugated plate channels with constant wall temperature, Proc. 34th National Heat
Transfer Conference, ASME, New York, Paper No. NHTC2000-12216, 1-8, 2000.
P. Fang, R.M. Manglik, M.A. Jog, and J. Pillutla, Numerical modeling of flow behavior in drilling bore wells:
Effects of annuli eccentricity and inner cylinder rotation, Proc. 8th International Symposium on Transport
Phenomena and Dynamics of Rotating Machinery, ISROMAC – 8, Vol. 1, PCTFE, Maui, HI, 492-499, 2000.
V.M. Wasekar and R.M. Manglik, Nucleate pool boiling heat transfer in aqueous anionic surfactant solutions:
Effect of additive molecular weight, Proc. 4th ISHMT/ASME Heat and Mass Transfer Conference, Tata
McGraw-Hill, New Delhi, 783-788, 2000.
V.M. Wasekar and R.M. Manglik, Pool boiling heat transfer in aqueous surfactant solutions, Applications in
Boiling Heat Transfer, Proc. ASME Heat Transfer Division – 1999, HTD-Vol. 364-2, ASME, New York,
305-313, 1999.
A. Muley and R.M. Manglik, Performance optimization of a plate heat exchanger with chevron plates, Proc.
of 33rd National Heat Transfer Conference, ASME, New York, Paper No. HTD99-0171, 1-8, 1999.
R.M. Manglik, Pool boiling characteristics of high concentration aqueous surfactant emulsions, Proc. 11th
International Heat Transfer Conference, Vol. 2, KSME, Seoul, Korea, 449-453, 1998.
A. Muley and R.M. Manglik, Enhanced heat transfer characteristics of a chevron plate heat exchanger for
viscous fluid thermal processing applications, Applications of Heat Transfer in Equipment, Systems, and
Education, HTD-Vol. 361-3/PID-Vol. 3, ASME, New York, 459-466, 1998.
A. Muley and R.M. Manglik, Investigation of enhanced heat transfer in low Reynolds number flows in a plate
heat exchanger, Applications of Heat Transfer in Equipment, Systems, and Education, HTD-Vol. 361-3/PID-
Vol. 3, ASME, New York, 295-302, 1998.
R.M. Manglik and C. Ranganathan, Visualization of swirl flows generated by twisted-tape inserts in circular
tubes, Proc. 5th World Conf. Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Vol. 3,
Edzioni ETS, Pisa, Italy, 1631-1636, 1997.
R.M. Manglik and A.E. Bergles, Experimental investigation of turbulent flow heat transfer in horizontal
concentric annular ducts, Proc. 5th World Conf. Experimental Heat Transfer, Fluid Mechanics and
Thermodynamics, Vol. 3, Edzioni ETS, Pisa, Italy, 1393-1400, 1997.
A. Muley and R.M. Manglik, Experimental study of turbulent flow heat transfer and pressure drop in a plate
heat exchanger with chevron plates, ASME Proc. 32nd National Heat Transfer Conference, Vol. 8, HTD-Vol.
346, ASME, New York, 69-76, 1997.
Raj M. Manglik
page 19 of 34
T.M. Harms, M.A. Jog, and R.M. Manglik, Numerical predictions of laminar fully developed forced
convection in a semi-circular duct with temperature-dependent viscosity variations, ASME Proc. 32nd National
Heat Transfer Conference, Vol. 10, HTD-Vol. 348, ASME, New York, 31-38, 1997.
R.M. Manglik and A.E. Bergles, Thermally developing laminar flows in circular-segment ducts with uniform
wall temperature, Proc. 9th International Symposium on Transport Phenomena in Thermal-Fluids
Engineering, Vol. 2, 831-836, 1996.
R.M. Manglik, Plate heat exchangers for process industry applications: Enhanced thermal-hydraulic
characteristics of chevron plates, Proc. A. E. Bergles Symposium on Process, Enhanced and Multiphase Heat
Transfer, Begell House, New York, 267-276, 1996.
A. Muley and R.M. Manglik, Experimental investigation of heat transfer enhancement in a PHE with = 60
chevron plates, Proc. 2nd ISHMT-ASME Heat and Mass Transfer Conference, Tata McGraw-Hill, New Delhi,
737-744, 1995.
R.M. Manglik and A. Muley, Thermal-hydraulic behavior of a mixed chevron single-pass plate-and-frame
heat exchanger, ASME Proc. 30th National Heat Transfer Conference, Vol. 12, HTD-Vol. 314, ASME, New
York, 89-96, 1995.
R.M. Manglik and J. Prusa, Thermally developing flows of non-Newtonian fluids with viscous heating:
Implications for the Nusselt number as a measure of convective heat transfer rates, General Papers in Heat
and Mass Transfer, Insulation, and Turbomachinery, HTD-Vol. 271, ASME, New York, 37-44, 1994.
R.M. Manglik and P.P. Fang, Second-Law analysis of heat transfer enhancement in offset-strip-fin compact
heat exchangers, Proc. 10th International Heat Transfer Conference, Vol. 6, I.Chem.E, UK, 67-73, 1994.
R.M. Manglik and A.E. Bergles, Influence of twisted tape generated swirl on single-phase heat transfer, Proc.
1st ISHMT-ASME Heat and Mass Transfer Conference, Tata McGraw-Hill, New Delhi, 249-256, 1994.
R.M. Manglik and A.E. Bergles, Numerical predictions of fully developed laminar flows with heat transfer in
circular-segment ducts, General Papers on Convection, HTD-Vol. 256, ASME, New York, 9-19, 1993.
S. Polat, R.M. Manglik, and R.L. Wilkins, Forced convective boiling of a non-Newtonian liquid in a multipass
plate heat exchanger, AIChE Sypmosium Series, No. 295, Vol. 89, AIChE, New York, 229-235, 1993.
J. Prusa and R.M. Manglik, Asymptotic and numerical solutions for thermally developing flows of Newtonian
and non-Newtonian fluids in circular tubes with uniform wall temperature, Fundamentals of Forced
Convection Heat Transfer, HTD-Vol. 210, ASME, New York, 1-10, 1992.
R.M. Manglik and A.E. Bergles, Heat transfer and pressure drop correlations for twisted-tape inserts in
isothermal tubes: Part I – laminar flows, Enhanced Heat Transfer, HTD-Vol. 202, ASME, New York, 89-98,
1992.
R.M. Manglik and A.E. Bergles, Heat transfer and pressure drop correlations for twisted-tape inserts in
isothermal tubes: Part II – transition and turbulent flows, Enhanced Heat Transfer, HTD-Vol. 202, ASME,
New York, 99-106, 1992.
R.M. Manglik and A.E. Bergles, The thermal-hydraulic design of the rectangular offset-strip-fin compact heat
exchanger, Proceedings of the A. L. London Symposium, Stanford University, March 23-24, 1989.
R.M. Manglik, A.E. Bergles, and S.D. Joshi, Augmentation of heat transfer to laminar flow of non-Newtonian
fluids in uniformly heated tubes with twisted-tape inserts, Proc. 1st World Conf. Experimental Heat Transfer,
Fluid Mechanics and Thermodynamics, Elsevier, New York, 676-684, 1988.
R.M. Manglik and A.E. Bergles, A correlation for laminar flow enhanced heat transfer in uniform wall
temperature circular tubes with twisted-tape inserts, Proc. 24th National Heat Transfer Conference, HTD-Vol.
68, pp. 19-25, ASME, New York, 1987.
Raj M. Manglik
page 20 of 34
Published Technical Reports:
A.J. Dongaonkar, M.A. Jog, and R.M. Manglik, Numerical modeling and analysis of fluid flow and heat
transfer in circular tubes fitted with different helical twisted core-fins, Report No. TFTPL-25, Thermal-Fluids
& Thermal Processing Laboratory, University of Cincinnati, Cincinnati, OH, July 2013.
V. Ravi, Manglik, R.M., and Jog, M.A., Effects of interfacial and viscous properties of pure liquids and
polymeric solutions on drop spread dynamics, Report No. TFTPL-R1-24, Thermal-Fluids & Thermal
Processing Laboratory, University of Cincinnati, Cincinnati, OH, 2012.
S. Rajendran, M.A. Jog, and R.M. Manglik, Experimental investigation of jet breakup at low Weber number,
Report No. TFTPL-23, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati,
Cincinnati, OH, September 2012.
U. Verma and R.M. Manglik, Experimental study of saturated pool boiling in water with a flourinated reagent,
Report No. TFTPL-22, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati,
Cincinnati, OH, August 2012.
D.S. Kalaikadal and R.M. Manglik, A parametric investigation of gas bubble growth and pinch-off dynamics
from capillary-tube orifices in liquid pools, Report No. TFTPL-21, Thermal-Fluids & Thermal Processing
Laboratory, University of Cincinnati, Cincinnati, OH, July 2012.
A.D. Athavale and R.M. Manglik, Characterization of nucleate pool boiling heat transfer of aqueous
polymeric solutions, Report No. TFTPL-20-NSF, National Science Foundation, March 2012.
P. Patel and R.M. Manglik, A computational study of enhanced heat transfer in low Reynolds number flows
through axially twisted ducts of rectangular cross section, Report No. TFTPL-19, Thermal-Fluids & Thermal
Processing Laboratory, University of Cincinnati, Cincinnati, OH, March 2012.
R.M. Manglik, M.A. Jog, and M.K. Jensen, Integrated multi-scale design and laboratory curriculum for
nuclear thermal-hydraulics engineering, Final Technical Report TFTPL-NRC-CDG, U.S. Nuclear Regulatory
Commission, October 2011.
R.M. Manglik, A.D. Athavale, D.S. Kalaikadal, A. Deodhar, and U. Verma, Multi-scale control and
enhancement of reactor boiling heat flux by reagents and nanoparticles, Report No. TFTPL-21-DOE-NEER
(DE-FG07-07ID14772), U.S. Department of Energy, August 2011.
O. Huzayyin and R.M. Manglik, Computational analysis of enhanced-fin compact cores and their application
for advanced heat and mass transfer management, Report No. TFTPL-18, Thermal-Fluids & Thermal
Processing Laboratory, University of Cincinnati, Cincinnati, OH, August 2011.
R.M. Manglik, and A. Manglik, Energy consumption, economic efficiency and fourth-generation
technological innovation for a sustainable future, Report No. TFTPL-EP-09, Thermal-Fluids & Thermal
Processing Laboratory, University of Cincinnati, Cincinnati, OH, October 2009.
O. Huzayyin and R.M. Manglik, Thermal-hydraulic modeling of enhanced plate-fin cores for advanced
aircraft thermal management, TFTPL Technical Report, sub-award (AFRL/PRP) BAA-03-05-PRK
Amendment 09, Honeywell Inc., May 2009.
P.P. Venkata and R.M. Manglik, Computational modeling of heat transfer enhancement applications in
thermal management of solid oxide fuel cells, Report No. TFTPL-17, Thermal-Fluids & Thermal Processing
Laboratory, University of Cincinnati, Cincinnati, OH, September 2008.
A. Subramani and R.M. Manglik, Experimental study of gas-bubble-dynamics in stagnant pools of pure
liquids and aqueous reagent solutions, Report No. TFTPL-16, Thermal-Fluids & Thermal Processing
Laboratory, University of Cincinnati, Cincinnati, OH, August 2008.
S. Kasimsetty and R.M. Manglik, Theoretical analysis and computational simulation of bubble dynamics and
gas-liquid interfacial phenomena, Report No. TFTPL-15, Thermal-Fluids & Thermal Processing Laboratory,
University of Cincinnati, Cincinnati, OH, August 2008.
Raj M. Manglik
page 21 of 34
K.P. Gatne, Jog, M.A., and Manglik, R.M., Experimental investigation of droplet impact dynamics on solid
surfaces, Report No. TFTPL-G1, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati,
Cincinnati, OH, 2006.
Y.N. Magar and R.M. Manglik, Convective cooling and thermal management optimization of planar anode-
supported solid oxide fuel cells, Report No. TFTPL-14, Thermal-Fluids & Thermal Processing Laboratory,
University of Cincinnati, Cincinnati, OH, September 2006.
S.C. Vishnubhatla and R.M. Manglik, Experimental characterization of interfacial behavior of aqueous
surfactant solutions, Report No. TFTPL-13, Thermal-Fluids & Thermal Processing Laboratory, University of
Cincinnati, Cincinnati, OH, July 2006.
S. Vyas and R.M. Manglik, Experimental characterization of vortex structure in sinusoidal wavy channels and
a case study for fuel cell applications, Report No. TFTPL-12, Thermal-Fluids & Thermal Processing
Laboratory, University of Cincinnati, Cincinnati, OH, October 2005.
Jiehai Zhang and R.M. Manglik, Numerical simulations of steady low-Reynolds-number flows and enhanced
heat transfer in wavy plate-fin passages, Report No. TFTPL-11, Thermal-Fluids & Thermal Processing
Laboratory, University of Cincinnati, Cincinnati, OH, June 2005.
Juntao Zhang and R.M. Manglik, Experimental and computational study of nucleate pool boiling heat transfer
in aqueous surfactant and polymer solutions, Report No. TFTPL-10, Thermal-Fluids & Thermal Processing
Laboratory, University of Cincinnati, Cincinnati, OH, 2004.
R.M. Manglik, M. Bahl, S. Vishnubhatla, J. Zhang, Interfacial and rheological characterization of aqueous
surfactant and polymer solutions, Report No. TFTPL-9, Thermal-Fluids & Thermal Processing Laboratory,
University of Cincinnati, Cincinnati, OH, 2003.
R.M. Manglik, and K. Yerra, Application of Twisted-Tape Inserts in Shell-and-Tube Exchangers:
Optimization of Enhanced Thermal-Hydraulic Performance, Report No. TFTPL-8, Thermal-Fluids & Thermal
Processing Laboratory, University of Cincinnati, December 2002.
R.M. Manglik and L. You, Computational modeling of laminar swirl flows and heat transfer in circular tubes
with twisted-tape inserts, Report No. TFTPL-7, Thermal-Fluids & Thermal Processing Laboratory, University
of Cincinnati, September 2002.
H.M. Metwally and R.M. Manglik, A computational study of enhanced laminar forced convection heat
transfer to Newtonian and non-Newtonian fluid flows in sinusoidal corrugated-plate channels, Report No.
TFTPL-6, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, July 2002.
J. Kundu, and R.M. Manglik, Computational modeling of laminar forced convection in three-dimensional
wavy channels, Report No. TFTPL-5, Thermal-Fluids & Thermal Processing Laboratory, University of
Cincinnati, September 2001.
V.M. Wasekar and R.M. Manglik, Nucleate pool boiling heat transfer in aqueous surfactant solutions, Report
No. TFTPL-4, Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, July 2001.
P. Fang and R.M. Manglik, Numerical investigation of laminar forced convection in Newtonian and non-
Newtonian flows in eccentric annuli, Report No. TFTPL-3, Thermal-Fluids & Thermal Processing
Laboratory, University of Cincinnati, December 1998.
A. Muley and R.M. Manglik, Heat transfer and pressure drop in plate heat exchangers, Report No. TFL-2,
Thermal-Fluids & Thermal Processing Laboratory, University of Cincinnati, December 1998.
R.M. Manglik and J. Ding, Analysis of laminar flow heat transfer characteristics of viscous power-law fluids
in double-sine ducts, Thermal-Fluids Laboratory Report No. TFL-Prog-PG-5, University of Cincinnati,
Cincinnati, OH, May 1996.
R.M. Manglik and J. Ding, Pool boiling characteristics of surfactant emulsions, Thermal-Fluids Laboratory
Report No. TFL-PG-Cont-1, Procter & Gamble Co., Cincinnati, OH, August 1995.
Raj M. Manglik
page 22 of 34
R.M. Manglik and A. Muley, Thermal-hydraulic behavior of a mixed chevron single-pass plate-and-frame
heat exchanger, Thermal-Fluids Laboratory Report No. TFL-Prog-PG-3, University of Cincinnati, Cincinnati,
OH, March 1995.
R.M. Manglik and A. Muley, The influence of the number of thermal plates on the plate heat exchanger
performance, Thermal-Fluids Laboratory Report No. TFL-Prog-PG-2, University of Cincinnati, Cincinnati,
OH, May 1994.
R.M. Manglik and A. Muley, Heat transfer and pressure drop characteristics of plate-and-frame heat
exchangers: A literature review, Thermal-Fluids Laboratory Report No. TFL-Int-1, University of Cincinnati,
Cincinnati, OH, September, 1993.
R.M. Manglik and A.E. Bergles, Heat transfer enhancement of intube flows in process heat exchangers by
means of twisted-tape inserts, HTL-8, Rensselaer Polytechnic Institute, Troy, NY, December 1991.
A.E. Bergles, M.K. Jensen, E.F.C. Somerscales, and R.M. Manglik, Literature review of heat transfer
enhancement technology for heat exchangers in gas-fired applications, GRI 91-0146, Gas Research Institute,
Chicago, June 1991.
A.E. Bergles and R.M. Manglik, Thermal-hydraulic design of a psyllium husk sanitizer, The Procter &
Gamble Co., Cincinnati, OH, November 1988.
R.M. Manglik and J. M. Prusa, An improved solution based on asymptotic analysis and numerical methods for
the Graetz problem, ISU-ERI-Ames-88117, Iowa State University, Ames, IA, October 1987.
R.M. Manglik, On bubble growth rates in boiling heat transfer: A case for an irreversible thermodynamic
analysis of liquid-vapor phase change, ISU-ME-631, Department of Mechanical Engineering, Iowa State
University, Ames, IA, December 1986.
R.M. Manglik and A.E. Bergles, An analysis of laminar flow heat transfer in uniform temperature circular
tubes with tape inserts, HTL-39, ISU-ERI-Ames-86290, Iowa State University, Ames, IA, May 1986.
R.M. Manglik, Computer-aided steam path and blade/nozzle design of impulse steam turbines – Part I: Single-
stage mechanical drive turbines, STD/TEW/Dev1; and Part II: Multi-stage 1500 – 3000 kW power turbines,
STD/TEW/DEV2, Triveni Engineering Works Ltd., Allahabad, India, 1982.
S. Arora and R.M. Manglik, Feasibility study of application of aircraft engines for land-based captive power
generation, The Triveni Engineering Works Ltd., Allahabad, India, 1980.
Raj M. Manglik
page 23 of 34
RESEARCH RESOURCE GENERATION
Over $9.5M in grants, funding, and sponsorship of research and scholarship activities as follows:
Grants Received:
Additive manufacturing development of efficiently cooled heat exchangers, US Navy Phase II STTR,
Technology Assessment & Transfer, Inc., 2017 – 18, $1,000,000 ($225,085 + $75,000 + $49,000).
Optimizing heat transfer to boiling polymer solutions of varying concentrations (with M.A. Jog), Procter &
Gamble, 2017, $85,000.
Enhanced air-cooling system with optimized asynchronously cooled thermal energy storage, ARPA-E, US
Department of Energy, 2015 – 18, $4,289,663 ($3,425,449 + $864,214).
Conformal additive cellular heat exchanger technology (CACHET), US Navy Phase I STTR, Technology
Assessment & Transfer, Inc., 2015 – 16, $150,000 ($25,000 + $21,000).
Optimized jet impingement heat transfer with reduced splatter, Education and Research Center (Occupational
Health & Safety Program, UC), 2013 – 14, Pilot Research Project (S. Rajendran), $5,800 (+$1,000).
Additives induced enhancement of refrigerant evaporative heat transfer, ASHRAE, 2012 – 13, Grant-in-Aid
(D.S. Kalaikadal), $11,500.
Fan compartment cooling and ventilation (with S. Abdallah and M.A. Jog), General Electric Aviation Co.,
2012-13, $60,000.
US – India workshop on heat and mass transfer and biannual ASME-ISHMT conference, National Science
Foundation, 2011 – 12, $45,000.
Molecular-scale solutal electrokinetics and micro-scale control of interfacial phenomena in ebullient heat
transfer (with M.A. Jog), National Science Foundation, 2008 – 12, $300,000.
Integrated multi-scale design and laboratory curriculum for nuclear thermal-hydraulics engineering (with
M.A. Jog; and M.K. Jensen, RPI), U.S. Nuclear Regulatory Commission (Nuclear Education Grant Program),
2009 – 11, $150,000.
Solid oxide fuel cells (SOFCs) – electro-chemical performance enhancement, thermal management, and
planar-cell-stack miniaturization, National Science Foundation (REU Program), Summer 2009, $13,050.
Characterization of cross-corrugation-surface induced swirl flows in non-Newtonian fluid media, Procter &
Gamble Co., 2008 – 09, $8,500.
Convective heat transfer in a novel enhanced heat transfer core surface – wavy-fins with periodic wall
perfusion for macroscopic mixing and swirl production, ASHRAE, 2008 – 09, Grant-in-Aid, $11,500.
Journal editor graduate assistantship, Graduate School, University of Cincinnati, 2008 – 09, $30,581.
Solid oxide fuel cells: electro-chemical performance enhancement, thermal management, and planar-cell-
stack miniaturization, Emerging Energy Systems (College of Engineering), 2007 – 08, $22,000.
Development of a novel problem-based learning curriculum on thermal-hydraulics for reactor safety analysis
(with M.A. Jog and B. Su), U.S. Nuclear Regulatory Commission (Nuclear Education Grant Program), 2007
– 08, $157,263.
Thermal-hydraulic modeling of enhanced plate-fin cores for advanced aircraft thermal management (BAA–
03–05-PRK Amendment 09), US Air Force Office of Research (AFOR) / Honeywell, 2007 – 08, $190,000.
Emerging energy systems, Economic Growth Challenge/Innovation Incentive Program (co-PI with R.N.
Singh, D. Dionysiou, P. Smirniotis, A. Helmicki, and S. Salem), Ohio Board of Regents, 2007 – 12,
$1,250,000.
NEER Reactor Engineering: Multi-scale control and enhancement of reactor boiling heat flux by reagents
and nanoparticles, US Department of Energy, 2007 – 10, $299,414.
Microchannel flow boiling of carbon dioxide near critical and sub-critical pressures, ASHRAE, 2007 – 08,
Grant-in-Aid (P. Rapolu), $11,500.
Raj M. Manglik
page 24 of 34
Laboratory equipment grant (Modular refrigeration system with active controls and sensors), Ohio Board of
Regents, 2006, $14,950.
Journal editor graduate assistantship, Graduate School, UC, 2005 – 06, $30,581.
Modeling of heat and mass transport in exchangers of a PEM fuel cell system, US Department of Energy,
2005 – 07, $211,362 (sub-contract from Honeywell Engines & Systems).
Laboratory equipment grant (High-speed digital imaging system; peristaltic flow and viscometric devices),
Ohio Board of Regents, 2003, $40,500.
Forced convective heat transfer in wavy plate-fin channels, Honeywell International (Engines & Systems),
2001 – 02, $12,000.
Enhanced heat transfer with phase-change in tube-side polymeric fluid flows with inserts (Equipment and
apparatus gift), Procter & Gamble Co., 2001, $32,000.
Swirl flow and film-cooling heat transfer in a combustor (co-PI with Prof. S. M. Jeng), General Electric
Aircraft Engines, 2001, $75,288.
Laboratory equipment grant (temperature controlled high-resolution, high shear-band viscometer; high-end
workstations), Ohio Board of Regents, 2000, $27,500.
Forced convective heat transfer in wavy plate-fin channels, Honeywell International (formerly AlliedSignal
Inc.), 2000 – 01, $15,000.
Forced convection heat transfer in rheologically complex non-Newtonian fluids, Procter & Gamble Co.,
UERP grant, 1997 – 2001, $150,000.
Air-side heat transfer enhancement by vortex generators in plate-fin passages of evaporators and condensers,
ASHRAE, 1997 – 98, Grant-in-Aid (M.H. Metwally), $7,500.
Journal editor – graduate assistantship, College of Engineering, University of Cincinnati, 1997 – 2001, 2002
– 04, $64,600.
Investigation of heat transfer phenomena in thermal processing of non-Newtonian polymeric surfactant
emulsions, National Science Foundation, CAREER Award, 1995 – 2000, $310,000.
Laboratory equipment grant (temperature controlled dynamic and static surface tension measurement; high-
end workstation), Ohio Board of Regents, 1996, 1998, $34,790.
Graduate student grant-in-aid (unrestricted grant), Procter & Gamble Co., 1997 – 99, $9,800.
The determination of pool boiling behavior of non-Newtonian emulsions, Procter & Gamble Co., 1995,
$16,000.
Transport phenomena in thermal processing of non-Newtonian emulsions, Miami Valley Research
Laboratories, Procter & Gamble Co., 1994, $5,000.
Investigation of heat transfer and pressure drop in non-Newtonian process liquid flows in plate heat
exchangers, Procter & Gamble Co., 1993 – 96, $100,000.
Laboratory equipment grant (laser-based digital image processing and flow visualization), Ohio Board of
Regents, 1994, $29,160.
Heat transfer enhancement by vortex generators in compact channels, National Science Foundation,
Research Initiation Award, 1992 – 95, $109,967.
Pressure drop and heat transfer in plate heat exchangers (research equipment gift) Tranter Inc., 1992 and
1995, $25,000.
High temperature heat recovery with enhanced heat transfer by vortex generators in plate-fin heat
exchangers, University Research Council, 1993 – 94, $4,675.
Thermal-hydraulic characteristics of plate heat exchangers (research equipment gift) Alfa-Laval Thermal
Inc., 1992 and 1995, $37,500.
Enhanced heat transfer in non-Newtonian fluid media in thermal processing applications, Graduate student
support (unrestricted grant) and equipment gift, Procter & Gamble Co., 1992, $18,650.
Raj M. Manglik
page 25 of 34
Other Funding and Research Support:
Undergraduate Research Scholarship, (Tao “Tom” Yu) ASHRAE, 2011, $3,000.
Academic-Year Research Experience for Undergraduates (AYREU), (Samuel Tidwell and Joshua Elrod),
National Science Foundation, 2010-11, $9,500.
REU Site for “Engineering Tomorrow” (with C. Montemagno, A. Kukreti, R.N. Singh, D. Shih, and I.
Papautsky), National Science Foundation, 2008.
Science and Technology Enhancement Program, STEP Fellowship (Gabriel B. Wickizer), National Science
Foundation, 2008 – 09, $30,000.
Memorial Undergraduate Engineering Scholarship (Jeremy F. Wright), ASHRAE, 2005, $3,000.
Computational modeling of electro-thermal-hydrodynamic behavior of fuel and oxidant flows in interconnect
channels of solid oxide fuel cells, Summer Research Fellowship (Yogesh Magar), Unversity Research
Council, 2005, $3,000.
ASME Foundation Scholarship (Jeremy F. Wright), American Society of Mechanical Engineers, 2004,
$1,500.
Characterization of curvature-induced vortex flow dynamics in wavy channels, Summer Research Fellowship
(Jiehai Zhang), University Research Council, 2003, $1,700.
Microscale bubble dynamics and heat transfer during nucleate boiling in aqueous polymeric solutions,
Summer Research Fellowship (Juntao Zhang), University Research Council, 2002, $1,700.
Experimental study of heat transfer and pressure drop in non-Newtonian flows in plate heat exchangers,
Summer Research Fellowship (Jiehai Zhang), University Research Council, 2000, $1,700.
Investigation of nucleate pool boiling characteristics of polymeric non-Newtonian emulsions, Summer
Research Fellowship (V.M. Wasekar), University Research Council, 1999, $1,700.
Enhancement of nucleate boiling heat transfer of solutions with aqueous surfactant and polymeric additives,
Summer Research Fellowship (Juntao Zhang), University Research Council, 1999, $1,700.
Undergraduate research scholarship (M. Harris), ASHRAE, 1999 – 2000, $3,000.
Air-side heat transfer enhancement by vortex generators in plate-fin passages of evaporators and condensers,
Summer Research Fellowship (H.M. Metwally), University Research Council, 1997, $1,700.
Experimental study of heat transfer and pressure drop in non-Newtonian flows in plate heat exchangers,
Summer Research Fellowship (A. Muley), University Research Council, 1993, $1,700.
Heat transfer enhancement by means of punched-tab vortex generators in compact plate-fin channels,
Summer Research Fellowship (C. Ranganathan), University Research Council, 1992, $1,700.
Raj M. Manglik
page 26 of 34
PROFESSIONAL ACCOMPLISHMENTS
Professional & Honor Societies:
Member, Sigma Xi (since 1988)
Member, Tau Beta Pi (elected Eminent Engineer, 2003)
Member, American Society of Mechanical Engineers, ASME (since 1988) Member (Secretary, 2014-18), Executive Committee, Heat Transfer Division, 2014-20.
Chair, K-10 Committee on Heat Transfer Equipment, Heat Transfer Division, 2013-16.
Member, K-2 Long-Range Planning Committee, Heat Transfer Division, 2011-15.
ASME Chair, ISHMT-ASME Heat and Mass Transfer Conference, Chennai, India, 2011.
Track(s) Chair/co-Chair, HTD representative, IMECE, Seattle, WA, 2007.
HTD Chair, Heat Transfer/Fluids Engineering Summer Conference, Charlotte, NC, 2004.
Elected Fellow, 2004.
Member, Coordinating Committee, National Heat Transfer Conference, Las Vegas, NA, 2003.
Member, K-10 Committee, Heat Transfer Division.
K-10 Committee Representative (KCR), ASME-AIChE 33rd National Heat Transfer Conference, Albuquerque, NM,
1999.
Session chair in several conferences (Heat Transfer Division).
Reviewer of conference and journal transactions.
Member, Membership Development and Honors Committee, Heat Transfer Division, 1997-2000.
Member, American Society of Heating Refrigerating and Air-conditioning Engineers, ASHRAE (since 1992) Coach and advisor – Student Design Team (N. Pavlak, D. J. Albert, M. Witt, and C. Brubaker), Second place winner,
Integrated Building Design, International 2013 ASHRAE Student Design Competition.
Coach and advisor – Student Design Team (D. Altschul, R. Chandra, P. Chakradeo, S.K. Ganesan, T. Hertel, V.
Krishnan, and C. Stratton), First place winner, “Joe and Rika Mansueto Library, University of Chicago,” Integrated
Sustainable Building Design, International 2012 ASHRAE Student Design Competition.
Coach and advisor – Student Design Team (D. Brisset, V. Gopal, V. Gopalakrishnan, A. Raghuram, and H. Liang),
Rising Star Award, “Drake Well Museum,” Integrated Sustainable Building Design, International 2011 ASHRAE
Student Design Competition.
Elected Member, Board of Governors, Cincinnati Chapter, 2000 – 2005.
Coach and advisor – Student Design Team (J. Bakhit, J. Etienne, and D. Gerbus), 2nd place winner, architectural
category, 1996 ASHRAE Student Design Competition.
Coach and faculty mentor, student design competition teams (every year since 1996).
Reviewer for conference transactions and HVAC&R Research, since 1994.
Faculty Advisor, UC Student ASHRAE Chapter (was responsible for its formal inception in Autumn 1992). In 1993,
this chapter was voted the “Best Student Chapter” in Region V.
Senior Member, American Institute of Chemical Engineers, AIChE (since 2006) Member, Max Jakob Memorial Award committee (2016-19).
Reviewer of AIChE Journal and annual conference proceedings.
Member, American Society of Engineering Education, ASEE, 1990 – 94.
Member, Institution of Engineers (India), 1976 – 1986.
Journals, Conferences & Scholarly Recognitions:
Editor-in-Chief, Journal of Enhanced Heat Transfer, Begell House, 2011 – present.
Associate Editor, Journal of Heat Transfer, ASME, New York, NY, 2003 – 2006, 2006 – 2009.
Editor, Journal of Enhanced Heat Transfer, Gordon & Breach / Taylor & Francis / Begell House, New York,
NY, 1994 – 2011.
Technical Editor, Data Books: Heat Transfer and Fluid Flow, Genium, Schenectady, NY, 1998 – present.
Raj M. Manglik
page 27 of 34
Editor, International Journal of Heat Exchangers, Edwards, Flourtown, PA, 1999 – 2008.
Reviewer and Panelist for the following funding agencies:
National Science Foundation, since 1995
Department of Defense (DEPSCoR program), since 1998
US Department of State (U.S. Civilian Research and Development Foundation or CRDF and Science Centers
program), since 2001
Swiss National Science Foundation, Berne, Switzerland, since 2004
United States-Israel Binational Science Foundation, Jerusalem, Israel, since 2005
Austrian Science Foundation, FWF, Vienna, Austria, since 2006
Georgian National Science Foundation (GNSF), Georgia, since 2006
Natural Sciences and Engineering Research Council of Canada (Canadian Space Agency [CSA], Space Science
Enhancement Program), Ottawa, Canada, since 2009
Council of Canadian Academies (Conseil des académies canadiennes), Ottawa, Canada, since 2011
Shota Rustaveli National Science Foundation (SRNSF), Tbilisi, Georgia – the main funding national agency in
support of science and technological development of Georgia; since 2011
American Chemical Society Petroleum Research Fund, since 2011
Reviewer of books and book proposals for the following:
John Wiley & Sons, New York, NY
John Wiley & Sons, UK
Oxford University Press, New York, NY
Taylor & Francis, New York, NY
Annals of the NY Academy of Sciences, New York, NY
Garland Science, New York, NY
Springer, Norwell, MA
WIT Press, Wessex, UK
Academic Press, Boston, MA
Elsevier Science & Technology, Waltham, MA
Reviewer of papers in the following archival journals and conferences:
AIChE Journal, since 1987
International Journal of Heat and Fluid Flow, since 1989
International Journal of Heat and Mass Transfer, since 1991
AIAA Journal of Thermophysics and Heat Transfer, since 1991
Experimental Thermal and Fluid Science, since 1991
ASME Journal of Heat Transfer, since 1993
Journal of Enhanced Heat Transfer, since inaugural issue, 1993
Numerical Heat Transfer, since 1994
ASHRAE International Journal of HVAC&R Research, since inaugural issue, 1994-95
Computers and Fluids, since 1994
ASME Journal of Fluids Engineering, since 1996
Chemical Engineering Communications, since 1996
ASME Applied Mechanics Reviews, since 1997
Heat Transfer Engineering, since 1998
International Journal of Heat Exchangers, since inaugural issue, 1999
IEEE Transactions, Components and Packaging Technologies, since 2000
Experimental Heat Transfer, since 2000
International Journal of Multiphase Flow, since 2000
Chemical Engineering Journal, since 2001
Applied Thermal Engineering, UK, since 2004
International Journal of Thermal Sciences, France, since 2005
Chemical Engineering & Processing, since 2005
Chemical Engineering Science, since 2006
APS Physics of Fluids, since 2007
Journal of Zhejiang University-SCIENCE A, 2008
Raj M. Manglik
page 28 of 34
International Journal of Numerical Methods for Heat and Fluid Flow, since 2008
Computational Material Science, 2008
Chemical Engineering & Technology, 2009
Langmuir, since 2010
Journal of Food Engineering, since 2010
International Journal of Transport Phenomena, since 2010
Microfluidics and Nanofluidics, since 2010
ASME Journal of Thermal Science and Engineering Applications, since 2010
Computers and Structures, 2010
Journal of Algorithms and Computational Technology, 2011
International Journal of Refrigeration, since 2011
Korea-Australia Rheology Journal, 2011
Applied Mathematical Modeling, 2013
Journal of Materials Processing Technology, 2014
Materials Chemistry and Physics, 2014
Engineering Science and Technology, 2014
International Journal of Applied and Computational Mathematics, 2015
Journal of Visualization (The Visualization Society of Japan), 2015
Review of Scientific Instruments (AIP), 2016
AIP Advances, 2016
Journal of Porous Media, 2016
Experiments in Fluids, 2017
National/Summer Heat Transfer Conference (ASME Heat Transfer Division & Process Industries Division, AIChE,
ANS, and AIAA), since 1988
ASME Winter Annual Meeting/IMECE, since 1992
ASME-JSME (USA/Japan) Thermal Engineering Joint Conference, since 1994
International Heat Transfer Conference, since 1994
ISHMT-ASME (India/USA) Heat and Mass Transfer Conference, since its inaugural meeting, 1994
World Experimental Heat Transfer, Fluid Mechanics & Thermodynamics Conferences, since 1988
A. L. London Symposium on Compact Heat Exchangers, Stanford University, 1989
International Gas Turbine Institute Conference, since 1995
AIAA Aerospace Science Meetings and Conferences, since 1996
International Symposium on Rotating Machinery, since 1997
JSME-KSME (Japan/Korea) Thermal Engineering Conference, 2000
World Conference on Experimental Heat Transfer, Fluid Mechanics, & Thermodynamics, since 2002
INTERPACK, International Conference on Electronic Cooling, since 2005
International Gas Turbine Institute (IGTI) annual Turbo Expo & Conference, since 2006
Conference/Symposium Chair & Organizer of the following:
Co-Chair (Heat Transfer track), ASME Heat Transfer, Fluids Engineering, & Nanochannels, Microchannels, and
Minichannels Conference, Washington, DC, July 10-14, 2016.
Topic Chair, Advances in Enhanced Heat Transfer Equipment (K10 and PID); Heat Exchangers in Thermal Storage
Systems (K10); and Heat Transfer Equipment for Energy and Water (K10 and PID), ASME 2014 IMECE, Montreal,
Canada, November 14-20, 2014.
Chair, Enhanced or High-Performance Heat Transfer and the Energy-Water Nexus: Symposium in Honor of
Professor A.E. Bergles, 75th Anniversary Celebration of HTD, ASME 2013 Summer Heat Transfer Conference,
Minneapolis, MN, July 14-19, 2013.
Chair, Tubular Inserts and Twisted Flows, K-10 session, ASME 2012 Summer Heat Transfer Conference, Puerto
Rico, USA, July 8-12, 2012.
Co-Chair, Applied Heat Transfer Enhancement: A Memorial Session for Professor Ralph Webb, ASME 2012
Summer Heat Transfer Conference, Puerto Rico, USA, July 8-12, 2012.
Conference Chair (ASME), 10th International ISHMT-ASME Heat and Mass Transfer Conference, Indian Institute
of Technology – Madras, Chennai, India, December 28-30, 2011.
Raj M. Manglik
page 29 of 34
Chair, Heat Transfer Enhancement for Practical Applications – Jet Impingement, K-10 session, ASME – IMECE,
Denver, CO, November 11-17, 2011.
Track Chair, Fundamentals of Heat and Mass Transfer, AJTEC 2011, 8th ASME/JSME Thermal Engineering Joint
Conference, Honolulu, Hawaii, March 13-17, 2011.
Member, US Scientific Committee, IHTC-14, International Heat Transfer Conference, Washington, DC, August 8-
13, 2010.
Chair, Computational Modeling in Heat Exchanger Design, K-10 session, ASME – IMECE, Orlando, FL,
November 2009.
Track Co-Chair, Energy Systems: Analysis, Thermodynamics and Sustainability and Sustainable Products and
Processes, ASME – IMECE, Seattle, WA, November 2007.
Track Co-Chair, Sustainable Products and Processes, ASME – IMECE, Seattle, WA, November 2007.
Co-Chair, Visualizations in Heat Transfer, K-22 session, ASME-JSME Thermal Engineering Conference (AJTEC)
& Summer Heat Transfer Conference, Vancouver, BC, Canada, July 2007.
Chair, Visualization of Heat Transfer including Photo Gallery of Heat and Fluid Flow, K-22 session, ASME –
IMECE, Chicago, IL, November 2006.
Co-Chair, K-10 Session: Heat Transfer Enhancement and Efficiency Improvement for Advanced Heat Exchangers,
ASME – IMECE, Chicago, IL, November 2006.
Conference Chair, HTD Technical Program, ASME Heat Transfer/Fluids Engineering Summer Conference,
(Sponsored by the Fluids Engineering and Heat Transfer Divisions of ASME, and AIChE), Charlotte, NC, July
2004.
Co-Chair, New Challenges in Enhanced Heat Transfer, ASME Heat Transfer/Fluids Engineering Summer
Conference, Charlotte, NC, July 2004.
Co-Chair, Transport Processes and Interfacial Phenomena in Multiphase Systems, Indian Institute of Technology –
Madras, Chennai, India, January 2004.
Co-Chair, Fundamentals of Heat Transfer Processes in Fuel Cells and Heat Exchangers, Cosponsored by K-8 and
K-10 HTD committees, ASME Summer Heat Transfer Conference, Las Vegas, NA, July 2003.
Member, organizing committee, 4th International Conference on Compact Heat Exchangers and Enhancement
Technology for the Process Industry, Crete Island, Greece, September-October 2003.
Member, organizing committee, 6th ASME – JSME Thermal Engineering Joint Conference (AJTEC), Hawaii Island,
Hawaii, March 2003.
Session Chair, 3rd International Conference on Compact Heat Exchangers and Enhancement Technology for the
Process Industry, Davos, Switzerland, June 2001.
Chair, Enhanced Heat Transfer, K-10 session, Heat Transfer Division, ASME – IMECE, Orlando, Florida,
November 2000.
Member, US scientific and organizing committee, 4th ISHMT/ASME Heat and Mass Transfer Conference, Pune,
India, January 2000.
Session Chair, NATO Advanced Study Institute on Heat Transfer Enhancement of Heat Exchangers, Çesme-Izmir,
Turkey, May-June, 1998.
Session Chair, International Conference on Compact Heat Exchangers for the Process Industry, (Engineering
Foundation Conference), Snowbird, UT, June 1997.
Symposium Co-Chair, Arthur E. Bergles Symposium on Process, Enhanced and Multiphase Heat Transfer, Georgia
Institute of Technology, Atlanta, GA, November 1996.
Chair, technical session on Enhanced and Compact Heat Exchangers, 2nd International ISHMT-ASME Heat and
Mass Transfer Conference, Surathkal, India, December 1995.
Chair, Symposium on Compact Heat Exchanger Technology for the Process Industry, 30th National Heat Transfer
Conference (ASME), Portland, OR, August 1995.
Chair, technical session on Enhanced Heat and Mass Transfer, 1st International ISHMT-ASME Heat and Mass
Transfer Conference, BARC, Bombay, India, January 1994.
Raj M. Manglik
page 30 of 34
TEACHING AND STUDENT ADVISING
Instructed in a variety of different courses on thermodynamics, fluid mechanics, heat transfer, phase change,
energy systems and devices, and thermal process engineering, at both the undergraduate and graduate
engineering levels.
Consistently recognized as an excellent teacher/instructor/mentor by both students and peers as is evident
from the teaching awards and the following:
Class/course evaluation scores of 1.0 ~ 1.6 on a scale of 1 to 5 (1 – for excellent and 5 – for poor) and 4.9 ~ 4.4 on
the new 5-point scale (5 – for excellent and 1 – for poor).
Repeatedly recognized with the Professor of the Quarter and Professor of the Year awards.
Was cited for “Real contribution to students’ educational experience at UC,” Class of 1993 (exit survey conducted
by the Vice President for Student Affairs and Service).
Was cited for “Making a significant positive impact on a student,” senior class surveys, 2012 – 1993, College of
Engineering.
Was cited by the engineering student tribunal for “Outstanding classroom instruction and concern for students,” in
2001, 1995, 1993, and 1992.
Was cited as “best teacher” in an alumni survey for the period 1991-1997.
Developed and initiated numerous educational innovations and pedagogical changes in the mechanical
engineering curricula for both undergraduate and graduate degree programs.
Hosted an international post-doctoral scholar (from Egypt), and two visiting scholars (from India and
Czechoslovakia).
Advised and coached undergraduate Design Clinic students (senior year design projects) for several teams
(each team consisting of three to five seniors) since 1992 on projects from many different industrial sponsors
[Cummins Engines, Procter & Gamble, General Electric Aircraft Engines, Ford, Cinergy/CG&E, Duke
Energy, Johnson & Johnson, Precision Lens, United Air Specialists, Seabrook Medical, ASHRAE, etc.].
Member and Examiner – Ph.D. Comprehensive/Fundamentals Examination Committee, Mechanical
Engineering Program, 1991 – present.
Faculty Advisor – Mechanical Engineering Class of 2010, Dept. of Mech., Ind. and Nuc. Engineering.
Faculty Advisor – India Students Association, University of Cincinnati, 2008 – present.
Faculty Advisor – Art of Living, student club and chapter, 2006 – present.
Faculty Advisor – Mechanical Engineering Class of 2003, Dept. of Mech., Ind. and Nuc. Engineering.
Faculty Advisor – Association for India’s Development, student chapter, 1996 – 2001.
Faculty Advisor – Mechanical Engineering Class of 1996, Dept. of Mech., Ind. and Nuc. Engineering.
Faculty Advisor – India Development Service, student chapter, 1993 – 1996.
Faculty Advisor – ASHRAE Student Chapter, (founding advisor) 1992 – to date.
Post-Doctoral, Graduate and Undergraduate Student Advising:
Advisor of Post-Doctoral Researcher:
1. Ahmed Z. El Gafy, Ph.D., Benha High Institute of Technology, Egypt, 2002-03 (now an adjunct faculty in
Applied Science, UC).
Raj M. Manglik
page 31 of 34
Advisor for Ph.D. Dissertations:
1. J. Subedi, “Corrugated and Enhanced Compact Surfaces for Air-Liquid and Liquid-PCM Heat Exchangers,”
in progress.
2. Dantong Shi, “Swirl-Promoted and Vortex-Induced Enhancement of Air-Side Flows in Compact Air-Cooled
Condensers,” (with Prof. M.A. Jog), in progress.
3. D.S. Kalaikadal, “Modulation and Characterization of Micro-Scale Interfaces in Gas/Vapor-Liquid ebullient
systems,” in progress.
4. S. Rajendran, “Investigation of Drop Generation in Low-Velocity Liquid Jets and its Impact Dynamics on
Thin Liquid Films,” (with Prof. M.A. Jog), in progress.
5. S. Manoharan, “Effect of Surface Wettability and Liquid Properties on Bubble Growth from Submerged
Orifice Plates,” (with Prof. M.A. Jog), graduated April 2016 (Assistant Professor, Western Michigan
University, Kalamazoo, MI).
6. O.A. Huzayyin, “Computational Modeling of Convective Heat Transfer in Compact and Enhanced Heat
Exchangers,” graduated August 2011 (Assistant Professor, Cairo University, Egypt).
7. Jiehai Zhang, “Numerical Simulations of Steady Low-Reynolds-Number Flows and Enhanced Heat Transfer
in Wavy Plate-Fin Passages,” graduated February 2005 (with John Deere, Cedar Falls, IA).
8. Juntao Zhang, “Experimental and Computational Study of Nucleate Pool Boiling Heat Transfer in Aqueous
Surfactant and Polymer Solutions,” graduated May 2004 (with GE Aviation, Cincinnati, OH).
9. H.M. Metwally, “Forced Convective Characteristics of Viscous Newtonian and Non-Newtonian Fluids in
Corrugated Channels,” graduated June 2002 (with Fluent Inc., Lebanon, NH).
10. V.M. Wasekar, “Nucleate Pool Boiling Heat Transfer in Aqueous Surfactant and Polymer Solutions,”
graduated July 2001 (Faculty, AMRITA University, India).
11. P. Fang, “Numerical Investigation of Laminar Forced Convection in Newtonian and Non-Newtonian Flows
in Eccentric Annuli,” graduated June 1998 (with LuK Inc., Wooster, OH).
12. A. Muley, “Heat Transfer and Pressure Drop in Plate Heat Exchangers,” graduated August 1997 (with
Boeing Research and Technology, Huntington Beach, CA).
Advisor for MS Theses/Projects:
1. S. Madhavan, “Experimental and Computational Evaluation of Enhanced Heat Transfer Performance of
Perforated and Offset Corrugated Plate-Fin Cores,” in progress.
2. J. Subedi, “Molecular Dynamics Modeling of Interfacial Surfactant Transport and Influence on Phase-
Change Behavior,” in progress.
3. A. M. Ganapathy, “Computational Modeling of Novel Techniques for Enhancing Heat Transfer in Compact
Heat Exchangers for Thermal Energy Storage,” in progress.
4. A. Fu, “Numerical Investigation of Laminar Flow and Heat Transfer in Circular Duct with Twisted Tape
Inserted for Non-Newtonian Fluid,” (with Prof. M.A. Jog), graduated April 2016 (continuing PhD studies).
5. V. Gopalakrishnan, “Characterizing Pool Boiling Heat Transfer of Nanofluids,” graduated July 2015.
6. V. Gopal, “Experimental Investigation of Aperiodic Bubbling from Submerged Capillary-Tube Orifices in
Liquid Pools,” graduated July 2013 (with Sigma Aldrich, Middletown, OH).
7. A. Raghuram, “Experimental Analysis of Post-Impact Drop Spread Behavior and Prediction of Maximum
Spread Factor,” graduated July 2013 (with Microsoft, Seattle, WA).
Raj M. Manglik
page 32 of 34
8. A. J. Dongaonkar, Numerical Modeling and Analysis of Fluid Flow and Heat Transfer in Circular Tubes
Fitted with Different Helical Twisted Core-Fins, graduated July 2013 (with Cummins Research &
Technology, Pune, India).
9. S. Rajendran, “Experimental Investigation of Jet Breakup at Low Weber Number,” graduated September
2012 (continuing PhD studies).
10. P. Patel, “Three-Dimensional Analysis of Enhanced Single-Phase Laminar Flow Convective Heat Transfer
in Twisted Rectangular Ducts,” graduated July 2012 (with Cummins, Columbus, IN).
11. U. Verma, “Experimental Study of Saturated Pool Boiling in Water with a Flourinated Reagent,” graduated
June 2012 (with Cummins, Columbus, IN).
12. G. B. Wickizer, “Experimental System Effects on Interfacial Shape and Included Volume in Bubble Growth
Studies,” graduated May 2012 (with Givaudan Flavour Corp., Cincinnati, OH).
13. D. S. Kalaikadal, “A Parametric Investigation of Gas Bubble Growth and Pinch-Off Dynamics from
Capillary-Tube Orifices in Liquid Pools,” graduated April 2012 (continuing PhD studies).
14. V. Ravi, “Effects of Interfacial and Viscous Properties of Pure Liquids and Polymeric Solutions on Drop
Spread Dynamics,” (with Prof. M.A. Jog), graduated February 2012 (with Cummins, Columbus, IN).
15. A. Deodhar, “Computational Study of Adiabatic Bubble Growth Dynamics from Submerged Orifices
Aqueous Solutions of Surfactants,” (with Prof. M.A. Jog), graduated December 2011 (with Tata Research
and Design Center, Pune, India).
16. R. Bhatia, “Effects of Molecular Mass, Concentration, and Temperature on the Rheological Properties of
Non-Newtonian Aqueous Polymeric Solutions,” graduated August 2011 (with GEA, York, PA).
17. A. Athavale, “Experimental Study of Saturated Nucleate Pool Boiling in Aqueous Polymeric Solutions,”
graduated August 2011 (with Ryobi Die Casting (USA), Inc., Shelbyville, IN).
18. S. K. Gande, “Characterization of Low Weber Number Post-Impact Drop-Spread Dynamics by a Damped
Harmonic System Model,” (with Prof. M.A. Jog), graduated August 2011 (with CD-Adapco, Seattle, WA).
19. F. Bishara, “Computational Modeling of Low Reynolds Number Swirl Flow Enhanced Heat Transfer in
Twisted Oval Tubes,” (with Prof. M.A. Jog), graduated December 2010 (pursuing PhD in Mathematics).
20. A. I. Ariyo, “Droplet Impact Dynamics of Aqueous Polymeric Solutions on Solid Surfaces,” (with Prof.
M.A. Jog), graduated February 2009 (with Procter & Gamble, Cincinnati, OH).
21. N. Partani, “Nucleate Pool Boiling in Aqueous Polymeric Solutions: Influence of Polymerization and Shear-
Thinning Rheology,” graduated March 2008 (with Danfoss, Little Rock, AR).
22. S. Kasimsetty, “Theoretical Analysis and Computational Simulation of Bubble Dynamics and Gas-Liquid
Interfacial Phenomena,” graduated March 2008 (with Ampack, Cincinnati, OH).
23. P. Priya Venkata, “Computational Modeling of Heat Transfer Enhancement Applications in Thermal
Management of Solid Oxide Fuel Cells,” graduated March 2008 (with Synteract HCR, San Diego, CA).
24. A. Subramani, “Experimental Study of Gas-Bubble-Dynamics in Stagnant Pools of Pure Liquids and
Aqueous Reagent Solutions,” graduated March 2008 (with Kellogg Brown and Root, Houston, TX).
25. Y. N. Magar, “Characterization of Flow and Heat Transfer in Enhanced and Compact Coolant Passages of
Solid Oxide Fuel Cells,” graduated August 2006 (with FHP-Bosch, Ft. Lauderdale, FL).
26. S. C. Vishnubhatla, “Experimental Characterization of Interfacial Behavior of Aqueous Surfactant
Solutions,” graduated June 2006 (with Danfoss, Baltimore, MD).
27. S. Vyas, “Experimental Characterization of Vortex Structure in Sinusoidal Wavy Channels and a Case Study
for Fuel Cell Applications,” graduated December 2005 (with Siemens Energy Inc.[Rolls-Royce Energy],
Columbus, OH).
Raj M. Manglik
page 33 of 34
28. S. R. Sampath Kumar, “Interfacial Characteristics and Ebullience in Aqueous Surfactant Solutions: Dynamic
Surface Tension and Single Bubble Behavior,” graduated March 2005 (with Cummins Engines, Columbus,
IN).
29. S. Nerur, “Enhanced Heat Transfer: Review of the Literature in the New Millenium,” graduated December
2003 (with Norcold Inc., Gettysburg, OH).
30. A. K. Singh, “Optimum Geometries for Liquid-Cooled Micro-Channel Heat Sinks in Silicon Substrates,”
graduated August 2003 (with BEHR America Inc., Troy, MI).
31. K. K. Yerra, “Optimization of Enhanced Heat Transfer in Single-Phase Flows with Twisted-Tape Inserts,”
graduated March 2003.
32. L. You, “Computational Modeling of Laminar Swirl Flows and Heat Transfer in Circular Tubes with
Twisted-Tape Inserts,” graduated August 2002 (with LexisNexis, Springfield, OH).
33. Y.H. Singh, “Numerical Investigation of the Graetz Problem for Newtonian and Non-Newtonian Flows in
Circular-Segment Ducts,” graduated August 2002 (with Siemens PG, Orlando, FL).
34. V.G. Gandhi, “Interactive Design of Plate Heat Exchangers: Rating and Sizing,” graduated August 2001
(with Fluent Inc., Lebanon, NH).
35. J. Pillutla, “Laminar Non-Newtonian Flows in Eccentric Annuli with Inner Core Rotation,” graduated
August 2001 (with Convergys, Cincinnati, OH).
36. J. Kundu, “Numerical Investigation of Laminar Forced Convection in Two-Dimensional and Three-
Dimensional Sinusoidal Corrugated Ducts,” graduated July 2001 (with UBS Warburg, Stamford, CT).
37. A.S. Brar, “Experimental Study of the Flow Behavior in Plate-Fin Cores with Arrays of Delta-Wing Shaped
Vortex Generators,” graduated July 2000 (with EDA Rural Systems, New Delhi, India).
38. S. Maramraju, “Experimental Database and Validation of Friction Factor Correlations for Twisted-Tape
Generated Swirl Flows,” graduated July 1999 (with Convergys, Cincinnati, OH).
39. R. Sadasivam, “Numerical Investigation of Fully Developed Laminar Forced Convection in Double-
Trapezoid Ducts,” (co-advisor, Prof. M. A. Jog), graduated September 1998 (with Primera Engineers Ltd.,
Chicago, IL).
40. C. Ranganathan, “Characteristics of Confined Swirl Flows in Compact Channels,” graduated June 1998
(with DBT America Inc., Blacksburg, VA).
41. J. Ding, “Integral Solutions for Laminar Fully-Developed Non-Newtonian Flows in Irregular Ducts,”
graduated July 1995 (with Roush Industrial Corp.).
42. C.W. Stover, “One-Dimensional Flow Network Solver Methodologies and Related Solver Issues,”
graduated August 1995 (with General Electric).
43. Z. Chen, “Experimental Database for Tape Generated Swirl Flows in Uniformly Heated Tubes,” graduated
August 1995 (with Metro Design Associates, Chicago).
44. K. R. Kroll, “Design of Refrigeration Evaporators and Condensers,” graduated March 1995.
45. E. Bradner, “Characterizing Chaotic Mixing in Internal Flows: A Methodology,” graduated March 1994
(joined General Electric).
46. R. Eismann, “Thermal-Hydraulic Design and Performance Rating of Plate Heat Exchangers for Viscous
Process Liquids,” graduated December 1992 (joined Procter & Gamble).
Member of Ph.D. Dissertation Committee of 14 students [12 have graduated, and 2 are in progress].
Member of MS Thesis/Project Committee of 34 students [29 have graduated, and 5 are in progress].
Raj M. Manglik
page 34 of 34
Advisor for BS Research & Design Projects:
1. N. Pavlak, D. J. Albert, M. Witt, and C. Brubaker, “Historic Dallas Power & Light (DP&L) Building,
Dallas, TX,” integrated sustainable building design, 2013 ASHRAE Student Design Competition, 2nd place
winner.
2. D. Altschul, P. Chakradeo, R. Chandra, S. Ganesan, T. Hertel, V. Krishnan, and C. Stratton, “Joe and Rika
Mansueto Library of University of Chicago, Chicago, IL,” integrated sustainable building design, 2012
ASHRAE Student Design Competition, 1st place winner.
3. D. Brisset, V. Gopal, V. Gopalakrishnan, A. Raghuram, and H. Liang, “Drake Well Museum,” integrated
sustainable building design, International 2011 ASHRAE Student Design Competition, Rising Star award.
4. J. Elrod, and S.P. Tidwell, “Drop-Surface Interfacial Manipulations for Microfluidic Devices and Micro-
Sensors,” NSF REU project, academic year 2010-11.
5. S. Schulte, C. Ingram, S.P. Tidwell, “Drop-Surface Interfacial Manipulations for Microfluidic Devices and
Micro-Sensors,” NSF REU project, Summer 2010.
6. L. DeCaroli (UC), and A.J. Meiser (Western Michigan Univ.), “Solid Oxide Fuel Cells - Electro-Chemical
Performance Enhancement, Thermal Management, and Planar-Cell-Stack Miniaturization,” NSF REU
project, Summer 2009.
7. J. Bakhit, J. Etienne, and D. Gerbus, 1996 ASHRAE Student Design Competition, 2nd place winner in the
architectural category.
8. S. Brinkman, “Air-Side Heat Transfer Enhancement by Vortex Generators in Plate-Fin Heat Exchangers,”
June 1996 (awarded ASHRAE Cincinnati Chapter 1996 Scholarship for this work).
9. P. C. Zelinski, “Numerical Solutions for Combined Forced and Free Convection in Uniformly Heated Semi-
Circular Ducts,” June 1993.
10. J. R. Siefker, “Regenerator Design for Fixed or Minimum Irreversibility,” June 1993 (awarded ASHRAE
Cincinnati Chapter 1993 Scholarship for this work).
11. P. C. Zelinski, “An Overview of the Design of Off-Peak Air Conditioning Systems,” January 1993 (awarded
ASHRAE Cincinnati Chapter 1993 Scholarship for this work).
12. J. Ford, “Database and Thermal-Hydraulic Correlations for Laminar Flows in Uniformly Heated Tubes with
Twisted-Tape Inserts,” June 1993 (awarded ASHRAE – Cincinnati Chapter 1992 Scholarship for this work).