Rainbird 300/400 Sprinkler Manual

ISA 300 / 400 SPRINKLER TIMERInstallation, Programming, and Operation Guide

RAIN BIRD IRRIGATION CORPORATIONTechnical Services: 800-247-3782 http://www.rainbird.com

CONTENTSINTRODUCTION .............................. 1

ISA Timer Features and Benefits ............. 1Timer Stations ......................................... 2ISA Timer Controls and Indicators .......... 3

INSTALL TIMER ............................... 4Select Location ....................................... 4Mount Timer ............................................ 5Install Battery ........................................... 5Connect Field Wiring ............................... 7

Select Proper Wire ............................ 7Connect Valve Wires to Timer .......... 7If Using a Master Valve or PumpStart Relay ........................................ 9

Connect Transformer ............................ 11PROGRAM TIMER .......................... 13

Set Current Time and Day ..................... 14Select a Program .................................. 15Pre-Set Watering Schedules ................. 16Select a Pre-Set Schedule .................... 17Modify a Pre-Set Schedule ................... 19

Set Schedule Watering Daysor Watering Interval ......................... 19

Set Schedule Start Time(s) .......................... 21Set Station Watering Duration(Run Times) ........................................... 23View Pre-Set Schedule Information....... 24

OPERATING THE TIMER ................ 26Turn the Timer On and Off ..................... 26Run a System Test ................................ 27Manually Run a Program orSingle Station ........................................ 29

Run Program(s) Manually .............. 29Run Station(s) Manually ................. 30

Adjust Watering Percentage ................. 32WINTERIZING THE SYSTEM .......... 33TROUBLESHOOTING ..................... 34

English

Page 1Page 1Page 1Page 1Page 1ISA Series Sprinkler TISA Series Sprinkler TISA Series Sprinkler TISA Series Sprinkler TISA Series Sprinkler Timerimerimerimerimer

INTRODUCTIONThank you for purchasing a Rain Bird ISA 300 / 400Series Sprinkler Timer. ISA timers provide simpleprogramming and flexible watering schedules tomeet almost any landscapes needs. These timerscan be used with any 110 VAC / 60 Hz electricaloutlet (240 VAC / 50 Hz for the internationalversion).

This manual describes how to install, program, andoperate your timer. Read this manual carefully andkeep it in a handy place for future reference.

If you have any problems with your ISA SprinklerTimer, please call the Rain Bird TechnicalAssistance hotline at 800-247-3782 before returningyour timer for service. You may also be able to findinformation to help solve your problem on theRain Bird web site: www.rainbird.com.

ISA Timer Features andBenefitsThe ISA Sprinkler Timer is an electronic clock thatcontrols when your sprinkler system turns on andhow long the sprinklers run. The ISA timers offerseveral advanced features, including:

Large LCD display and easy-to-use programmingdial and buttons

Six convenient pre-set watering schedules

Two independent watering programs (ISA 400models)

Up to three watering start times per program

Ability to control four, six, or eight watering stations(depending on model)

Rain-Off feature can suspend watering and retainall programmed information

English

ISA Series Sprinkler TISA Series Sprinkler TISA Series Sprinkler TISA Series Sprinkler TISA Series Sprinkler TimerimerimerimerimerPage 2Page 2Page 2Page 2Page 2

Timer StationsMost sprinkler systems divide the yard into stations(also called zones). You can program each stationto water for a different length of time, so the amountof water fits the different plant types, soil conditions,and sunny/shady areas in the yard.

Each station has an irrigation valve that runs severalsprinklers. An electric signal from the timer opens

the first valve, which turns on the sprinklersconnected to it. When these sprinklers have run fortheir programmed time, the timer closes the firstvalve and opens the second valve.

For example, the illustration below shows that station1 is currently watering. When station 1 finishes, thetimer will shut it off and start station 2. When station 2finishes, station 3 begins, and so on.

English


ISA Timer Controls and IndicatorsThis illustration shows the programming controls onthe face of the ISA Sprinkler Timer. These controlsinclude:

Manual On button Advance button Up/ Down arrow buttons LCD display Programming dial Program A/B button

English


INSTALL TIMERBefore installing your ISA Sprinkler Timer, make sureyou have the following tools and equipment:

Phillips screwdriver

Three #10 screws (1'' / 32mm)

9-volt alkaline battery (not included)

18-gauge color-coded, multi-strand, direct-burialwire for wire runs of less than 800 feet. (For runslonger than 800 feet, use 14-gauge color-coded,multi-strand, direct-burial wire).

Watertight wire splice connectors

Plastic mounting anchors (may be required forplaster or masonry walls)

Select LocationNOTE::::: The ISA Timer is for INDOOR useonly. If you must install it outdoors, use awater-resistant cabinet, such as the RainBird Model TC-2 Timer Cabinet. The TC-2is a heavy-duty, weather-resistant plasticcase that lets you convert any indoor-onlytimer to outdoor use.

Select a convenient indoor location within six feet(1,9 m) of a 120-volt AC electrical outlet (240-voltoutlet for international 50 Hz models). The mountinglocation should be completely protected frommoisture, direct sunlight, and freezing temperatures.

English


Mount Timer Screw two #10 screws into the wall 4''

(120 mm) apart. Leave 1 8 '' to '' (3,2 to 6,4 mm)of each screw head protruding from the wall.(Use plastic mounting anchors for plaster ormasonry).

Place the two keyhole-shaped slots on the backof the timer over the screw heads. Then slide thetimer securely down onto the screws.

OPTIONAL: To further secure the timer, removethe timers lower access cover by gently pullingthe cover off using the slots on the left and rightsides of the timer. Then drive a third screwthrough the lower middle hole.

Install BatteryDuring a power outage, the battery preserves yourprogrammed watering schedules. A newly installedbattery will hold information for up to six hours ifpower goes out.

NOTES::::: The battery serves as memoryback-up only. You can program the timeron battery power, but the system will notwater without AC power.

Replace the battery once a year. If poweroutages occur frequently, you may needto change the battery more often.

English


NOTE::::: When replacing the battery,DO NOT unplug the transformer or youwill lose all programmed information.

If the battery fails during a power outage, the timerwill revert to its default watering program. The defaultprogram waters each station every day for 10minutes, starting eight hours after AC powerresumes. The default program will continue until youreprogram the timer.

To install the battery, remove the timers loweraccess cover by gently prying out the cover atthe slots on the left and right sides of the timer.

Connect the terminals of a 9-volt alkaline batteryto the timers two-wire battery clip. (DO NOTuse a rechargeable battery). The display flashesAC OFF and 8:00 AM.

Replace the lower access cover, or connect fieldwiring as described in Connect Field Wiring onpage 7.

CAUTION::::: DO NOT allow the battery tocontact the timers terminal strip.

English


Connect Field Wiring

Select Proper WireFor wire runs of less than 800 feet, use 18-gaugecolor-coded, multi-strand, direct burial wire. Forlonger runs, use 14-gauge wire of the same type.

Choose wire that has one strand for each valve inyour system, plus one strand for the common wire.For example, use five-strand wire if you have fourvalves, seven-strand wire for six valves, etc.

Tape off spare wire strands for future system use ortroubleshooting. Wire that is buried undergroundmust have watertight connections and be code-approved for underground use. Avoid placingunderground wire in places where it may bedamaged by digging or other activities.

Connect Valve Wires to TimerEach valve connects to the timer with two wires: ahot wire of its own, and a common wire that itshares with the other valves.

NOTE::::: The ISA Series Timers can beused with most hydroindexing valves.Please contact the valve manufacturer formore information.

English


Remove the timers lower access cover by gentlyprying out the cover at the slots on the left andright sides of the timer.

Splice together one wire from each valve (usuallythe white strand) to create a single commonwire. Connect the common wire to the terminalscrew labeled COM.

NOTE::::: Make sure all wire connectionsare tight and in firm contact with theterminal screws. Use watertight spliceconnectors to prevent corrosion andavoid short circuits.

Connect each valve hot wire to a numberedscrew on the timers terminal strip. Connect thewire from valve number 1 to terminal screw 1;connect the wire from valve 2 to terminal screw2, and so on.

CAUTION::::: DO NOT connect morethan one valve wire to each terminalscrew. Wiring more than one valve toeach terminal will damage the timer. Also,if you are using more than one timer, donot share common wires between them.

English


After connecting all valve wires, replace thetimers lower access cover.

NOTE::::: To save water and money, youcan also install a rain sensor, such asRain Birds RS-1 Rain Shut Off. The RS-1measures rainfall and preventsunnecessary watering.

If Using a Master Valve or PumpStart Relay(Optional ISA 400 Series only)

NOTE::::: Complete this section only if youare using a pump start relay or a mastervalve (an automatic valve installed on themainline pipe upstream from the stationvalves). The timer does not provide themain power for a pump.

ISA 400 Series Timers allow a master valve or pumpstart relay to operate whenever a valve is operating.Pumps are used in some places to draw water froma well or other source.

If you are activating a pump from the timer, you mustalso install a Pump Control Relay, such asRain Birds PCR-1. The PCR-1 offers solid-statereliability and can activate most 120- or 240-voltpump motors up to two horsepower.

English


Connect the color-coded hot wire from themaster valve or pump start relay to the timerterminal screw marked MV.

Connect the common wire from the mastervalve / pump start relay to the common wirecoming from the station valves. This wireconnects to the timer terminal screw markedCOM.

NOTE::::: Make sure that the total draw ofthe master valve or pump start relay plusthe draw of the valve does not exceed0.650 Amps at 24 VAC, 60 Hz.

To avoid possible pump damage, connect ashort jumper wire from any unused stationterminal(s) to the nearest terminal screw inuse. For example, if you have an eight-stationtimer with only four stations in use, jumperstations five through eight to the nearest activestation (four).

English


Connect TransformerAfter installing the battery and connecting the fieldwires, you are ready to connect the timerstransformer.

CAUTION::::: DO NOT plug in thetransformer until you have completed andchecked all wiring connections. Also, donot attempt to link two or more timerstogether with a single transformer.

Remove the timers lower access cover bygently pulling the lower access cover off usingthe slots on the left and right sides of the timer.

Turn the dial to RAIN / OFF. Plug the pigtail connector (located on the end of

the transformer wire) into the two-prongconnector to the left of the battery compartment.

English


Plug the transformer into an electrical outlet. Thedisplay flashes the hour digits and OFF.

NOTE::::: If the display does not come on,verify that the battery is new and securelyconnected.

Turn the dial to AUTO / RUN.This completes the installation and wiring process.You are now ready to program your timer.

English


PROGRAM TIMERProgramming is the process of telling the timer whenand how long you want to water. The timer opensand closes the irrigation valves according to theprogram you set.

Each program contains:

Watering days the specific days of theweek on which watering takes place (forexample, Monday, Wednesday, and Friday for aCustom schedule), or a watering interval (forexample, every third day).

Start time the time(s) of day that theprogram begins. This is the time that the firststation in the program begins watering; all otherstations then follow in sequence.

Watering duration (run time) thenumber of minutes that each station runs.

When programming, you can only change the fieldthat is flashing in the LCD display. If you want tochange something that is not flashing, press

V

untilthe desired field flashes. Then change it by pressingthe V or V buttons.

NOTE::::: For normal timer operation, turnthe dial to the AUTO / RUN position. Ifthe dial is left in any other position,schedules will not water as programmed.

English


Set Current Time and DayYou must set the current time and day the first timeyou program the timer, and after any powerinterruption.

Turn the dial to TIME & DAY. The hour andminute digits flash in the display.

Press V and the day of the week will flash. Press V or V until the correct day of the week

appears in the display.

Press V and the hour will flash. Press V or V until the current hour appears in

the display.

Make sure the correct AM / PM time indicatorappears in the right-hand side of the display.

Press V and the minute digits will flash. Press V or V until the current minute appears in

the display.

The display should now show the correct timeand day.

English


Select a Program(ISA Models 406 & 408 Only)

ISA Timer models 406 and 408 have two programs, Aand B. Each program can have its own wateringschedule and start times. For example, Program Acould run on Monday, Wednesday, and Friday, whileProgram B could run on Tuesday, Thursday, andSaturday.

You can assign any station to Program A, Program B,or both. If you only plan to use one program, useProgram A.

The currently selected program appears in theleft-hand side of the LCD display. The display willshow either PGM A or PGM B.

To select a program, press the Program A/Bbutton until the program you want appears in thedisplay. Pressing the Program A/B buttonswitches back and forth between the twoprograms.

NOTE::::: It is easier to select one program(A or B) and program it completely beforemoving to the second program.

English


For your convenience, the ISA Sprinkler Timer hassix pre-set watering schedules (C and 1 5). Thepre-set schedules are already programmed into thetimer and are shown in the table to the right.

The watering schedule you choose determines:

What days watering occurs

What time(s) watering starts (up to threedifferent start times per day)

How long the sprinklers on each station run(duration)

Once youve selected a pre-set schedule, you caneither use that schedules default watering days andtimes, or modify the schedule to suit your ownwatering needs.

NOTE::::: Even if you want to create yourown Custom watering schedule, youmust select one of the pre-set schedulesfirst. Then modify it to fit your needs.

Pre-Set Watering Schedules

If you want to water on specific days of the week(e.g., Monday, Wednesday, and Friday), select pre-set schedule C.

If you want to water on a fixed interval (e.g., everyday, every third day, etc.), select a pre-set schedule,1 through 5.

Schedule Watering DaysStartTimes

WateringDuration

C Every day 8:00 am 10 minutes

1 Every day 8:00 am 10 minutes

2 Every day 6:00 am,10:00 am,&2:00 pm

5 minutes

3 Every other day 6:00 am 10 minutes

4 Every third day 6:00 am 10 minutes

5 Every fourth day 6:00 am 15 minutes

English


Select a Pre-Set Schedule Turn the dial to PRE-SET SCHEDULES. C flashes in the display. Press V or V to display the pre-set schedule

you want.

When the schedule you want appears, press O

to select it.

The schedule number flashes, and a boxappears around SCHED in the display. Thisshows that you have locked-in the schedule.The display also shows the watering days andthe schedules first start time.

English


If you want the pre-set schedule you selected towater on its default days and time(s), just turn thedial to AUTO / RUN to run the scheduleautomatically.

Now that youve chosen a pre-set schedule, no otherprogramming is necessary. One of the pre-setschedules will meet most homeowners wateringneeds. However, if you want to modify the schedule,continue on to Modify a Pre-Set Schedule.

NOTE::::: For dual-program models (ISA 406and 408), you can select a schedule forProgram B.

Press the Program A/B button untilProgram B appears in the display. Thenrepeat steps 3 5 to lock in a pre-setschedule for Program B.

English


Modify a Pre-Set ScheduleTo modify a Pre-Set Schedule, you must first selectit as described on page 17. You can then modify the:

Watering day(s) (if you chose Custom C)

Watering interval (if you chose Pre-Set Schedule1 5)

Start time

Station watering duration

You must also set the schedules start time(s), andset each stations watering duration. Follow theprocedures below to modify the Pre-Set Scheduleyou selected.

Set Schedule Watering Days orWatering IntervalIf You Chose Pre-Set Schedule C:

Turn the dial to CUSTOM SCHEDULE DAYS.

The days of the week appear at the bottom ofthe display with SU (Sunday) flashing. Press V

or V to turn watering OFF or ON for that day.

English


Press V to move to the next day of the week. Press V or V to turn watering OFF or ON for that

day. Repeat Steps 3 and 4 for each day of theweek. The bottom of the display will show all ONdays only.

If You Chose Pre-Set Schedule 1 through 5:

Turn the dial to CUSTOM SCHEDULE DAYS.

The selected pre-set watering schedule (1 5)flashes at the top of the display. For example, ifyou locked in Pre-Set Schedule 1, Every 1Days would be flashing.

Press V or V to select the watering interval youwant. You can choose any interval from Every 1Day to Every 7 Days.

English


Set Schedule Start Time(s)

Turn the dial to CUSTOM SCHEDULE STARTS. Start time 1 flashes in the display.

You can program up to three start times per day.You can program all three start times, or leaveone or two of them turned off. At least one starttime must be activated for the system to water.

NOTE::::: Do not confuse start timenumbers with station numbers. When youare setting start times, the word Startappears in the bottom of the display.

If you set up more than one start time for aprogram, the program will run severaltimes a day even if the start times areall the same. For example, if you enterthree 8:00 a.m. start times, the programwill run three times, starting at 8:00 in themorning.

English


Press V and the time of start 1 flashes. Press V or V to set the start time you want. You

can set start times in increments of 15 minutes.To turn off a start time, advance the time past11:45 p.m. (The OFF position is between 11:45p.m. and 12:00 a.m.)

To set additional start times, press V and start 1will flash again.

Press V to advance to start 2. Repeat steps 2 through 6 to set start times 2 and

3, if necessary.

Set Station Watering Duration(Run Times)

Turn the dial to CUSTOM SCHEDULE DURATION. Station 1 flashes and its wateringduration appears in the right side of the display.

English


To change the watering duration of any station,press V or V until the desired station numberflashes in the display.

Then press V . The watering duration minutesflash. You can set each station for a differentwatering duration from 1 minute to 2 hours.

Press V or V to set the length of time you wantthe station to water. To turn off the station, pressV to move past :01 minutes until OFF appearsin the display. The OFF position is between :01minutes and 2:00 hours.

Press V and repeat steps 2 5 for each station.This completes the programming for a customschedule.

Turn the dial to AUTO / RUN to resume normaloperation.

NOTE::::: For dual program models(ISA 406 and 408), press the Program A/Bbutton to switch programs. Then repeatall programming steps for the secondprogram.

English


View Pre-Set Schedule InformationIf you wish, you can use this procedure to view thedefault watering information for any Pre-SetSchedule. The same information is shown in the tableon page 16.

NOTE::::: You cannot modify any scheduleinformation displayed during this step.This procedure only lets you view theschedule information.

Turn the dial to PRE-SET SCHEDULES. Press V or V until the display shows the

schedule you want to view.

Press V . Start time 1 flashes and the displayshows the time set for start #1.

Press V . Start time 2 flashes and the displayshows the start time for start #2. Repeat to viewstart #3.

English


Press V . Station 1 flashes and the display showsthe watering duration set for Station 1.

Press V . Station 2 flashes and the display showsthe watering duration for Station 2. Repeat to viewadditional stations.

Press V . The display shows the schedule numberand watering frequency (for example, Every 2Days).

Repeat steps 2 through 7 to review additionalschedules.

English


OPERATING THE TIMERTurn the Timer On and Off To set the timer to automatic operation, turn the

dial to AUTO / RUN. The display will show thecurrent day and time, and all Pre-Set and Customschedules will water automatically.

NOTE::::: The dial must be in the AUTO /RUN position to water automatically. If thedial is in any other position, your wateringschedule(s) will NOT run.

To turn off the timer and prevent all watering, turnthe dial to RAIN / OFF. The display will show thecurrent day and time and will alternately flashOFF to show you the timer has been turned off.

You may want to turn the timer off during rainyweather, system maintenance, seasonalshutdown, or any time you dont want wateringprograms to run as scheduled.

English


Run a System TestThe ISA Sprinkler Timer has a built-in test programthat will run each station in sequence for twominutes. You can use this program to test the properoperation of the systems valves and sprinklers.

Turn the dial to RAIN / OFF. Press and release the V and V buttons at the

same time. The stations will turn on, one at atime, in sequence (except those you haveprogrammed OFF), starting with station 1.

The display will show the station number, theremaining run time, and will alternately flashOFF as the test run time counts down.

NOTE::::: To cancel the test program after ithas started, press the Manual On

O

button repeatedly until you cycle throughall the stations and the LCD shows thecurrent day and time.

English


NOTE::::: The Sprinklers On symbol will appear in the display whenever thesystem is watering (i.e., during normaloperation, manual operation, or a testprogram).

If you have a dual-program timer (ISA Model 406or 408), only the stations assigned to program Aor B (whichever appears in the display) will runduring the test.

To test the other program, press the Program A/B button. Then repeat step 2.

When the test is finished, turn the dial back toAUTO / RUN. Remember, the dial must be onAUTO / RUN to water normally.

English


Manually Run a Program or Single StationIf an area needs extra watering, you can manuallyrun individual stations or an entire program. Followthe appropriate procedure for manual operation.

NOTE::::: You cannot operate the timermanually during regularly scheduledwatering times, or when the dial is in theRAIN / OFF position.

Run Program(s) Manually

Turn the dial to AUTO / RUN. Press the O button once. The stations will turn

on, one at a time, in sequence (except thoseyou have programmed OFF), starting withstation 1. Each station will run for itsprogrammed watering duration.

NOTE::::: To stop manual operation after ithas started, turn the dial to RAIN / OFFfor five seconds. When the SprinklersOn symbol disappears from thedisplay, manual watering will stop. Thenturn the dial to AUTO / RUN to resumenormal operation.

English


For dual program models (ISA 406 and 408),manual operation will run the program (A or B)that appears in the left-hand side of the LCD.

To switch programs, press the Program A/Bbutton until the desired program appears in theLCD. Then press

O

to begin watering.

Run Station(s) Manually

Turn the dial to AUTO / RUN. Press the V button. Station number 1 flashes in

the display.

If you want the displayed station to water, pressthe

O

button.

Press V to advance to the next station. Repeatsteps 2 through 4 to select all the stations youwant to run.

English


NOTE::::: To stop a manual cycle after ithas started, turn the dial to RAIN / OFFfor five seconds. When the SprinklersOn symbol disappears from thedisplay, manual watering will stop. Thenturn the dial to AUTO / RUN to resumenormal operation.

The first selected station will begin wateringimmediately. When you finish selecting thestation(s) you want to water, those stationnumbers will flash in the top of the display.

After 15 seconds, the stations remaining in thetop of the display will water. Each station will runfor its normally programmed watering time.

For dual program timers (ISA model 406 and408), manual operation will only run the station(s)on the program (A or B) shown in the left side ofthe LCD.

To switch programs, press the Program A/Bbutton until the desired program appears in thedisplay. Then repeat steps 2 through 4 tomanually start the desired stations in thatprogram.

English


The Watering Percentage feature (sometimes calledWater Budgeting) lets you increase or decreasethe watering duration (run times) of all stations onboth programs (A and B), without reprogrammingthe timer.

You can set the watering percentage from 10% to200%, in 10-percent increments.

Use the Watering Percentage feature to cut backwatering during cool winter months, or to increasewatering during hot, dry weather.

Watering percentages are calculated on the normalprogrammed run times for each station. Forexample, if a station normally runs for 10 minutes,and you set the Watering Percentage to 80%, thestation will water for 8 minutes (80% of 10 minutes).

If you set the Watering Percentage to 120%, thatsame station will water for 12 minutes (120% of 10minutes).

Turn the dial to Adjust Water %. The selectedprogram (A or B) and the currently selectedWatering Percentage appear in the display.

Adjust Watering Percentage

English


Press the V or V buttons to select the desiredWatering Percentage.

Turn the dial back to the AUTO / RUN position.All stations will now run at the selected WateringPercentage.

WINTERIZING THE SYSTEMIn cold-weather areas, you may want to turn off yourtimer during winter months. Before shutting down thesystem for the winter, make sure to drain the waterfrom all irrigation lines to prevent freezing damage topipes and valves.

Then turn the dial on the timer to the RAIN / )OFFposition.

For more information about winterizing yoursystem, please call your local irrigation professional,visit our Web site at www.rainbird.com, or call 800-RAINBIRD.

In lightning-prone areas, Rain Bird recommends thatyou disconnect the field wires from the timersterminal strip, and unplug the transformer from theoutlet. This will protect the timer from lightning-caused power surges.

English


TROUBLESHOOTINGSymptom Cause Correction

Electrical Issues1. LCD display is blank, or

flashes AC OFF, and thetime.

a. Burned out fuse Replace the fuse with the timers sparefuse (750mA for 406 and 408; 500mA for304).

b. Transformer notplugged in

Make sure the two-prong connector isconnected and the transformer issecurely plugged in.

c. Wall socket notsupplying power

Make sure the main AC power supply isworking properly.

2. Fuse blows out frequentlyand the display goes blank.

a. Wiring short betweenthe valve and the timer

Check all field wiring for nicked orskinned wires. Check all wiringconnectors. Repair or replace asneeded.

b. Shorted solenoid onone or more valves

Check all valve solenoids for properoperation. Replace as needed.

English


Symptom Cause Correction

Electrical Issues3. Fuse blows as soon as the

timer is plugged in.a. Faulty transformer Replace the transformer.

b. Electrical short in thetimer

Call the Rain Bird Technical AssistanceHotline at 800-247-3782.

4. LCD display is frozen,and the timer will notaccept programming.

An electrical surge mayhave damaged the timerselectronics.

Unplug the timer and remove the batteryand fuse. Let the timer sit for threeminutes without power. Then reinstall thebattery and fuse, and plug in the timer.

If there is no permanent damage, thetimer will accept programming andresume normal operation.

English



Watering Issues5.

Automatic and Manualcycles do not beginwatering.

a.

Water source notsupplying water

Make sure the main water line and allsupply lines are open and operatingproperly.

b. Wires not properlyconnected

Make sure all field wires and mastervalve/pump start relay wiring isconnected properly.

c.

Wires loose or cut;corroded connections

Check field wiring for broken, cut, orskinned wires. Replace if necessary.Check all wire connections and replacewith watertight splice connectors, asneeded.

d.

Dial not set to AUTO /RUN

Make sure the dial is on AUTO / RUN,not any other dial position.

e.

All stations set to OFF(zero run timeprogrammed)

Check all stations watering duration.Make sure each station is programmedwith a non-zero watering time.

English



Watering Issues6. Watering occurs at the

wrong start times on AUTO/ RUN.

The wrong pre-set schedulemay be locked in

Turn the dial to Pre-Set Schedules andmake sure you have selected the correctschedule.

If you have a dual-program timer (ISA406 or 408), the station(s) may beprogrammed to run on both programs (Aand B). Check the start times for bothprograms.

7. Watering does not startproperly during manualoperation

Wrong program may beselected.

Press the Program A/B button until theprogram (A or B) you want to waterappears in the display.

8. Valve does not shut off afterwatering at the scheduledtime.

a. Valve may be clogged. Inspect the valve and remove any debris.

b. Timers memory boardis locked on

Same as correction for Step 4.

English



Watering Issues9. A single station does not

shut off after watering.Valve may be stuck opendue to debris

Inspect the valve and remove any debris.

10. Timer Test Mode does notwork

Dial in the wrong position Make sure the dial is in the RAIN / OFFposition before pressing the and buttons.

English


NOTES

NOTES

ISA Series Sprinkler TISA Series Sprinkler TISA Series Sprinkler TISA Series Sprinkler TISA Series Sprinkler Timerimerimerimerimer PPPPPage 41age 41age 41age 41age 41

NOTE: This irrigation timer generates radiofrequency energy and may cause interference toradio and television reception. It has been typetested and found to comply with the limits for aClass B computing device in accordance with thespecifications in Subpart J of Part 15 of FCC Rules,which are designed to provide reasonableprotection against such interference in a residentialinstallation.

However, there is no guarantee that interference willnot occur in a particular installation. If thisequipment does cause interference to radio ortelevision reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by oneor more of the following measures:

reorient the receiving antenna

move the timer away from the receiver

plug the timer into a different outlet so the timerand receiver are on different branch circuits.

If necessary, the user should consult the dealer oran experienced radio and television technician foradditional suggestions. The user may find thefollowing booklet prepared by the FederalCommunications Commission helpful: How Toldenfify and Resolve Radio-TV lnferferenceProblems. This booklet is available from the USGovernment Printing Office, Washington D.C.20402, Stock No. 004-000-0034504. (Price is $2.00postpaid.)

Rain Bird Corporation Customer Support Center1-800-RAIN-BIRD

(520) 434-6290 FAXwww.rainbird.com

2001 Rain Bird Sprinkler Mfg. Corp.

Rainbird 300/400 Sprinkler Manual

Documents

Transcript of Rainbird 300/400 Sprinkler Manual