4.1

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Drills Moun ng Holes for Mul ple Transducer Models

Cost Recovered with First 40 Holes (less than 5 min/pair of holes)

Drill Bits Not Included, But Are Available From J&A Industries

Electric Model

DIA

L1

L2

TRANSDUCER DIA. L1 L2

HONEYWELL 7/16” 5 3/4” 3 3/8”

TIEFENBACH 13 mm 145 mm 86.5mm

GETS (HARMON) SERVO 25/64" 5” 3"

SOUTHERN TECHNOLOGIES 3/8" 4" 3 11/16"

225505-X0X OPTION X

WITHOUT CARRYING CASE 0

WITH CARRYING CASE 1

OPTION X

BASE UNIT ONLY 0

WITH ELECTRIC POWER 1

Rail Drill Multi-Purpose

Milwaukee 1.3 HP Unit Total Weight 28 lbs

Bubble Level Insures Perpendicular Installa on

Before Drilling

Hand Crank Provides Proper Drill Feed Rate Without The Need For

Excessive Force (op onal ratchet drive available)

J&A # DESCRIPTION

003001-000 ELECTRIC POWER UNIT, MILWAUKEE, 1.3 HP

019085-002 STORAGE CASE

4.2

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Rail Drill Dual Head

Drill Both Transducer Moun ng Holes at the Same Time

Costs Recovered With the First 30 Holes (5 min/pair of holes)

Total Weight 28 lbs. Including Drill

Increased accuracy and reduce drilling me

Drill bits included (2 each)

Bubble Level Insures Drill is Installed Perpendicular to the Rail before drilling

A er The Ini al Unit is Setup Addi onal Loca ons Are Very Simple: Set the unit on the rail, adjust level, ghten the T-handles, then drill

Ver cal Adjustment is Made By Loosing Two Bolts, Adjus ng, and Re ghtening the Bolts

Drill Bits Are Easily Changed Using a Standard Allen Wrench. All Drill Bits Are Supplied With Flats to Properly Fit the Drill Chucks

Standard 6’ Double Insulated Electrical Cord

Milwaukee Right Angle Drill (shipped with original

container and warranty)

Right Angle Head Provides Op on of Two Drilling Speeds

Hand Crank Provides Proper Drill Feed Rate Without The

Need For Excessive Force

22550X-X0X OPTION X

HONEYWELL 0

TIEFENBACH 1

GETS (HARMON) SERVO 2

SOUTHERN TECHNOLOGIES 3

OPTION X

BASE UNIT ONLY 0

WITH ELECTRIC POWER 1

OPTION X

WITHOUT CARRYING CASE 0

WITH CARRYING CASE 1

DIA

L1

L2

TRANSDUCER DIA. L1 L2

HONEYWELL 7/16” 5 3/4” 3 3/8”

TIEFENBACH 13 mm 145 mm 86.5mm

GETS (HARMON) 25/64" 5” 3"

SOUTHERN TECH 3/8" 4" 3 11/16"

J&A # DESCRIPTION

003001-000 ELECTRIC POWER UNIT, MILWAUKEE, 1.3 HP

019085-001 STORAGE CASE

4.3

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Rail Bond Drill

Milwaukee 1.3 HP Unit Total Weight 28 lbs

Bubble Level Insures Perpendicular Installa on

Before Drilling

Hand Crank Provides Proper Drill Feed Rate Without the Need

For Excessive Force

225508-X0X

OPTION X

WITHOUT CARRYING CASE 0

WITH CARRYING CASE 1

OPTION X

BASE UNIT ONLY 0

WITH ELECTRIC POWER 1

J&A # DESCRIPTION

003001-000 ELECTRIC POWER UNIT, MILWAUKEE, 1.3 HP

019085-002 STORAGE CASE

Inexpensive Drill for Drilling Rail Web for Bonds

Drill Bits Not Included, But Are Available From J&A Industries

Uses Standard 1/2” Jacobs Chuck

4.4

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Adjustable wrench chain fits 4” to 8” diameter pipe

Right angle head accepts electric power and two speeds

Hand crank provides proper drill feed rate without the need for excessive force

Electric Powered Drill Can Be Mounted in Either Up or Down Posi on

225506-X0X

OPTION X

BASE UNIT ONLY 0

WITH ELECTRIC POWER 1

MAST DRILL KIT * 3

* Customer Specific Configura ons

OPTION X

WITHOUT CARRYING CASE 0

WITH CARRYING CASE 1

Drills up to 2” diameter mast holes and can be used to cut slots

Light weight and easy to install, weighs only 18 lbs. including electric drill

Gas or electric power units available

Drill 4” to 8” diameter pipe with standard wrench chain (op onal sizes available for larger pipe)

Hole saws and mandrel sold separately

Mast Drill

4.5

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Mul -Func on Rail Drill Bits J&A # DESCRIPTION DRILL

023001-043 3/8” COBALT DRILL BIT HONEYWELL MULTI-FUNCTION RAIL DRILLS

023001-0441 13mm COBALT DRILL BIT TIEFENBACH MULTI-FUNCTION RAIL DRILLS

023001-0442 13mm COBALT DRILL BIT (3/8" SHANK) TIEFENBACH MULTI-FUNCTION RAIL DRILLS

023001-050 25/64” COBALT DRILL BIT GETS (HARMON) SERVO MULTI-FUNCTION RAIL DRILLS

023001-051 7/16” COBALT DRILL BIT (3/8” SHANK) HONEYWELL MULTI-FUNCTION RAIL DRILLS

023001-043 3/8" COBALT DRILL BIT SOUTHERN TECH MULTI-FUNCTION RAIL DRILLS

023001-049 17/32” COBALT DRILL BIT TIEFENBACH MULTI-FUNCTION RAIL DRILLS

Dual Head Rail Drill Bits J&A # DESCRIPTION DRILL

023001-0431 3/8” COBALT DRILL BIT HONEYWELL DUAL RAIL DRILLS

023001-0441 13mm COBALT DRILL BIT TIEFENBACH DUAL RAIL DRILLS

023001-0501 25/64” COBALT DRILL BIT GETS (HARMON) SERVO DUAL RAIL DRILLS

023001-0511 7/16” COBALT DRILL BIT (3/8” SHANK) HONEYWELL DUAL RAIL DRILLS

023001-0431 3/8" COBALT DRILL BIT SOUTHERN TECH DUAL RAIL DRILLS

023001-0491 17/32” COBALT DRILL BIT, MODIFIED 13MM TIEFENBACH DUAL RAIL DRILLS

Mast Drill Hole Saws and Hardware J&A # DESCRIPTION DRILL

008014-000 HOLE SAW, 1 1/2” MAST DRILL, PAGE 5.3

008015-000 HOLE SAW, 2” MAST DRILL, PAGE 5.3

023001-052 1/4” HS PILOT DRILL BIT MAST DRILL, PAGE 5.3

008011-000 ARBOR MAST DRILL, PAGE 5.3

Drill Hardware

4.6

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

OPTION X

WITHOUT CARRYING CASE 0

WITH CARRYING CASE 1

Spring Switch Tester

Easy to read hydraulic gauge displays

pounds of force

Spring loaded cylinder assists with return to

open posi on

Hand operated hydraulic pump delivers up to 5000 pounds of force

Protec ve vacuum molded carrying case

On and Off the Rail is Easier With 9” Clamp Opening

Durable Yet Lightweight Construc on (33 lbs.)

Completely Portable – Use Anywhere

Overall Dimensions: 27”L x 12 ¾” H x 5” W

Hydraulic Gauge is Protected Against Accidental Breakage

Hydraulic Pump and Cylinder Combine to Deliver Up To 5000 Pounds of Force

Video Tape Instruc ons AND Instruc on Manual Available Online

225480-00X

4.7

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

OPTION X

WITHOUT CARRYING CASE 0

WITH CARRYING CASE 1

Spring Frog Tester

Easy to read hydraulic gauge displays

pounds of force

Hand operated hydraulic pump delivers up to 5000 pounds of force

225223-00X

One Tool to Test All Spring Frog Types

Test Both Wing Rail and Plunger Force Durable, Lightweight Construc on (44 lbs.) Completely Portable—Use Anywhere, Any me

Hydraulic is Protected Against Breakage

4.8

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Gages & Wrenches

Designed for checking standard points Designed for checking long turnout mid-points Sits on rail

GAUGE BLOCK

225152-000

POINT DETECTOR GAGE

225492-000

J&A # DESCRIPTION

150097-000 WRENCH, OFFSET, 1 1/16” OPEN END

150081-000 WRENCH, OFFSET, 1 1/4” OPEN END

150080-000 WRENCH, OFFSET, 1 5/8” OPEN END

150096-000 WRENCH, OFFSET, 2” OPEN END

150246-000 WRENCH, STRAIGHT, 1 3/4” HEX

4.9

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Safety Flags

Holder Available For One (1) or Two (2) Flags Safety Red, Red w/Reflec ve Trim, or Blue Flags Available Colors One Piece Design Feature Allows for Easy A achment and Removal Requires No Tools for Installa on or Adjustment Double Unit Holds One (1) or Two (2) Flags Fits 132 Pound Rail and Up Made From Corrosion Resistant Stainless Steel Economical, Lightweight, Personnel Presence Warning Device

Safety Red Signal Flag, 18” x 18”

Flag Staff, 3/4 X 36”

J&A # DESCRIPTION

180245-001 FLAG HOLDER W/ 1 SAFETY RED FLAG

180245-002 FLAG HOLDER W/ 2 SAFETY RED FLAGS

180245-012 FLAG HOLDER W/ 2 RED REFLECTIVE FLAGS

180245-013 FLAG HOLDER W/ 2 RED REFLECTIVE FLAGS & STROBE

180245-101 FLAG HOLDER W/ 1 BLUE FLAG

180245-102 FLAG HOLDER W/ 2 BLUE FLAGS

225428-000 SAFETY RED FLAG 18 X 18, 36" STAFF

225428-001 BLUE FLAG 18 X 18, 36" STAFF

225428-002 RED FLAG W/ REFLECTIVE BORDER 18 X 18 , 36” STAFF

220053-000 FLAG HOLDER, 3/4 DIAMETER, NO FLAGS

225528-000 SAFETY STROBE, MAGNETIC, W/ RED LENS

Double Flag Holder With Strobe Light

Upper Tension Bar Keeps Flags Stabilized for Most Rail Sizes

Red Signal Flag w/ Reflec ve Border 18” x 18”

4.10

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Battery Carrier

Designed to Reduce Poten al Back Injuries When Li ing and Moving Signal Ba eries

Universal Carrier Fits Most Signal Ba eries

Nylon Coa ng Reduces Corrosion and Poten al Shor ng

Ba ery Restraining Rod Contains Ba ery From Tipping During Transport

Posi ve Latch Keeps Unit Secured Once the Carrier is

Closed on the Ba ery

An -Skid Material Secures Base of Ba ery When Unit is

Closed and Locked BATTERY CARRIER

225280-000

BATTERY LIFTING SLING

225315-000

BATTERY COVER

024002-000

Used With the Ba ery Extractor or Forkli to Li Ba ery

Used As Safety Protec on to Prevent Accidental Shor ng

4.11

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Battery Extractor

End Swivels for Adjustment On Uneven Ground

Adjustable Legs for Uneven Ground

Reversible Ratchet Mechanism for Easy

Raising and Lowering Legs Are Removable for Storage

BATTERY EXTRACTOR

180126-000

TROLLEY

225303-000

RATCHET ASSEMBLY

225317-000

BATTERY LIFTING SLING

225315-000

STORAGE TUBE

180125-000 6'

180125-001 8'

Includes: Tri-pod, Sling, Trolley, Ratchet, and Storage Tube

En re unit folds easily and stores into a 6” x 92” PVC storage tube

Designed to reduce poten al back injuries when li ing and moving signal ba eries

Universal ba ery extractor can be set up in less than 10 minutes

Use extractor to move ba eries from truck to ground, ground to inside of bungalows, and ba ery tubs up to ground level

Complete unit weighs only 22 pounds

4.12

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

Remote Control Searchlight

Durable High Impact ABS Housing

Wireless Remote Control With 150’

Range

Axial Filament Phillips Bulb

Available With Magne c or Suc on Cup Base

J & A#

251000-000

251001-000

DESCRIPTION

REMOTE CONTROL SEARCHLIGHT, MAGNETIC BASE

REMOTE CONTROL SEARCHLIGHT, SUCTION BASE

Dual Speed 120 Degree Ver cal and 370 Degree Rota on Sweep

12 Volt Automo ve Adapter

Weighs 5 pounds

Weather and Salt Water Resistant

40,000 Candlepower Bulb

4.13

J&A Industries, LLC 11918 Grandview Road Grandview, MO 64030 (800) 748-7722 Fax (913) 281-5722

RAIL PROFILE GAUGE

Pole collapses for easy storage

J&A# DESCRIPTION

225567-000 Rail Profile Gauge

Gauge wire included to check rail wear

Weighs 5 pounds

Hi-Vis Orange rail gauges

Can check one or both rails

Light weight fiberglass pole

Safety Orange rail gauges