Racking and Shelving Catalogue

32
www.calgarywarehouseequipment.com 403-236-8133 Racking & Shelving Storage

description

Racking and shelving catalogue

Transcript of Racking and Shelving Catalogue

www.calgarywarehouseequipment.com 403-236-8133

Racking & Shelving

Storage

NORTH AMERICAN STEEL

EASY-UP 5000 SHELVINGI ndus t r i a l & Commerc ia l She l v ing combin ing s t rength , appearance & ve rsa t i l i t y

< To ta l l y bo l t l ess and c l i p l ess she l v ing

< Four in te r l ock ing components fo rm a r ig id un i t

< Access ib le f rom a l l f ou r s ides

< She l ves ad jus t i ndependent l y on 1” cen t res

< Assembly in m inutes w i thout spec ia l t oo l s

A1

WIDTH

HEIGHT

EASY-UP 5000 SHELV INGADVANCED FEATURES

NAS EASY-UP 5000 is the shelving of tomorrow here today, offering the looks of office shelving, the strength of industrial shelving and the economy of commercial shelving.

All shelves have 14 gauge beams front and back that adjust on 1” centres with capacities up to 1000 lbs. u.d.l. per shelf, (see type and size of shelf for individual capacity).

Square posts and -Z- crossmembers form a rigid 6000 lbs. capacity endframe for those highrise or mezzanine applications. The common 1 1/8” post gives you more linear inches of storage.

No cross-braces required, loads can be accessed from all sides, thus acting as double deep shelving at single depth cost.

EASY-UP 5000 offers the versatility of 3 types of shelves: economical particle board, durable painted malboard and extra strength steel shelves. Plus a wide range of accessories.

EASE OF INSTALLATION

Designed for easy, trouble-free installations. Beams and crossmembers hook into post slots to form a rigid frame, and shelves just drop on to the beams. No nuts and bolts or clips required, thereby saving installation time and cost. Shelves can easily be adjusted or added to your system at any time.

Contact your NAS representative or dealer to design your storage area for maximum utilization, thus freeing up much needed floor space.

PRODUCT FINISH

Baked-on alkyd enamel over corrosion resistant phosphate undercoat. Standard colour is Almond Beige.

FRAME COMPONENTS

THREE BASIS COMPONENTS

ENDFRAME: Consisting of two posts and two crossmembers for 74” & 86” heights and three for 96” height, achieving a load capacity of 6000 lbs. per endframe. Ideal for mezzanines, catwalks or highrise systems.

BEAMS: Front and back beams act as full length and reinforcements delivering that extra rigidity, strength and impact resistance.

SHELVES: Three types of shelves are available to compliment your specific application.

LAYOUT DETAIL

When engineering shelving layouts allow the following extras to accommodate outside frame dimensions: 1” for depth of unit, 1 1/4” for each frame used in shelving run. Shelves remain actual size. Standard Beams require only 1” shelf height and Heavy Duty Beams require 1 1/2” shelf height. Beams and Shelves adjust on 1” centres.

DEPTH

STARTER

ADDER

A2

EASY-UP 5000 SHELV INGCOMPONENTS

UPRIGHTS: UP 74, 86, 98” Slots on 1” centres, covering 3 sides, clean front view. Marked on 6” centres for quick beam installation. Half slots on top for flush mounted top shelf.

FRAME CONNECTORS: FC 12, 15, 18, 24” Frame connectors and uprights form a rigid endframe. Connectors are designed with a patented locking tab to be turned into the upright for safety and rigidity.

STANDARD BEAM: SB 36, 48, 60” Double locking clip V-type design to support board shelf. Steel Shelf locks over beam. Two beams required per shelf.

1”

BASEPLATE or HEAVY-DUTY BEAM: BP 36, 48, 60” Used as kickplate, but may also be used as H.D. Beam if increased load capacity is required.

1 1/2”

PARTICLEBOARD SHELVES Industrial Grade 5/8” Particleboard, with 42 lbs. density guarantees a strong and smooth uniform surface.

Part No. Size (in) Capacity (lbs) 7150 12 x 36 600 7151 12 x 48 300 7152 12 x 60 200 7163 18 x 36 500 7164 18 x 48 300 7165 18 x 60 200

7176 24 x 48 250 7177 24 x 60 200

STEEL SHELVES Full panel steel shelf with U-shaped front edge and full length beam offers strength and durability

Part No. Size (in) Capacity (lbs) 5241 18 x 36 600 5242 18 x 48 500 5251 24 x 36 400 5252 24 x 48 400

shelf capacity.

The natural particle board matches the colour of the

The Easy-Up 5000 shelving system combines industrial strength and durability with a clean appearance for office and retail applications.

BEAM SAFETY CLIP Spring Clip locks beam securely to post. Clips can be removed easily.

FOOT PLATES Foot Plates clip into tube section of post to distribute weight on tile or wood floors

POST EXTENDERS A pair of steel inserts designed to force-fit into hollow section of upright to extend height of post.

POST CAP Plastic Post Cap to enhance appearance.

beige steel components.

7174 24 x 36 300Shelves lock over beams acting as front & back reinforcement increasing

A3

NORTH AMERICAN STEEL

EASY-UP 7000 SHELVING SYSTEMS

The i d e a l o p en - t y p e l o n g s p an s h e l v i n g s y s t emFou r b a s i c i n t e r - l o ck i n g c omponen t s o n l y

NORTH AMERICAN STEEL

NORTH AMERICAN STORAGE

300 Hopkins Street, Whitby, Ontario Canada L1N 2B9Phone: (905) 668-3300Toll Free: (800) 735-4153 Email: [email protected]: (905) 668-5477 Web: www.naseco.ca

2103 - 7th Street, Nisku, Alberta Canada T9E 7Y3Phone: (780) 955-2444Toll Free: (800) 241-8968 Email: [email protected]: (780) 955-3463 Web: www.naseco.ca

With 50 Years

Manufacturing Experience

NORTH AMERICAN STEEL

is the leading name for

Innovative Storage Ideas

AUTHORIZED DISTRIBUTOR:

Pa l l e t Rack ing Sys tems

Kwikerec t S tee l She l v ing

C lo thes Lockers

E ASYU P 7000 S H E LV I N G SYSTE M SSTO R AG E SYSTE M S

MEZZANINE SYSTEMS

EASYUP 7000 can easily be extended to provide multiple storage levels

where ceiling heights permit. Economical method to add storage without

adding floor space by either: extending your existing (or new) shelving by

installing a Catwalk System to reach the upper level; or placing complete

Mezzanine floor over your existing (or new) shelving, using the upper floor

for storage. Stairs, and rail, drop zones, safety gates and conveyors are

available for maximum efficiency.

AUTOMOTIVE STORAGE

EASYUP 7000 specialty units have been designed for automotive storage:

Tire Racks: 15”d x 72”w units for tire storage.

Muffler Racks: Open shelf unit with wire mesh top shelf for

muffler storage.

Fender & Trim Racks: Open unit with back supports for vertical storage.

Bulk Storage: Accessible from all sides to depth of 48” x 96”.

Back to Back units allow storage up to 48” x 96”.

Small Parts: Plastic, cardboard or steel bins, plus full extension

drawer inserts are available.

Display & Convenience: Add peg board to end of rows for hanging belts,

gaskets etc.

MAXIMUM EVENLY DISTRIBUTED STATIC LOAD PER PAIR OF BEAMS

BEAM STYLE 36 in. 48 in. 60 in. 72 in. 96 in.

LD V-Shaped Beam 500 400 250MD Medium Duty Beam 1200 950 700 480with tie-bar and shelf support 1800 1500 1200 900HD Heavy Duty Beam 2000 1400 1000 800 450with tie-bar and shelf support 1900 1700 1500 900*

Calculation based on: 1 Tie-Bar and 1 Shelf-Support for 36, 48, & 60” beams. 2 Tie-Bars and 2 Shelf-Support for 66, 72, & 96” Beams.Safety Factor: 1.66

HIGH RISE SYSTEMS

EASYUP 7000 heavy duty double post end frames, rigid cross members and

double hooking beams provide storage units up to 40 feet in height.

Cross aisle supports are provided to prevent tipping and add rigidity.

Open access to all shelves allow easy picking by entry guided wire or rail

picker trucks.

A4

EASYU P 7000 S H E LV I N G SYSTE M SSTO R AG E SYSTE M S

EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS

EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS

ADVAN C E D FEATU R E S

LONG SPAN SHELVING (BULK STORAGE)

EASYUP 7000 is the ideal universal shelving system designed for hand loading of

large size or heavy merchandise. It features open accessibility from all sides as no

cross bracing is required.

Shelf Size Range: From12” x 36” to 48” x 96”

Capability of 96” x 96” with back to back units.

Beam Variety: Selection from the most economical beam to 2000 lbs. load

capacity per level.

FOUR MAIN COMPONENTS

Common Posts:

Are 12 gauge, one piece impact resistant and squared for strength with rounded

corners for safety. Posts are slotted on 2” centres for Beams and have holes on 6”

centres for back to back bolting, wall anchoring or for aid in Beam positioning. For

High-Rise Systems or 3 Tier Mezzanines, Posts can be doubled up at lower levels for

increased load capacities.

Cross Members:

Are “Z” shaped, with a patented Safety Locking Tab which can be unlocked again to

interchange sizes and adjust depths.

Beams:

Double-Hook Beams on top and bottom provide complete lateral rigidity without the

interference and cost of braces. Three types of Beams are available from single to

double hooking heavy duty Beams, to match shelf load requirements with minimum

Beam size.

Shelves:

Are re-inforceable with Shelf Support and Tie Bars.

Particle Board Shelves offer strength with economy.

Wire Mesh Shelves allow passage of air, light and water and will not retain dust

or debris.

TIE BARS: TB 18, 24, 30, 32, 36, 48

Clip into the bottom lip of a pair of

beams, preventing beams

from “bowing out”

under load.

SHELF SUPPORTS FOR MD BEAMS:

MSS 18, 24, 30, 32, 36, 48

Designed to support shelves at any

point locking into upper lip of

beam.

SHELF SUPPORTS FOR HD BEAMS:

HSS 24, 30, 36, 48

Shelf Supports lock into the upper

lip of a pair of beams.

CROSS MEMBERS:

Cross Member and posts form a rigid end

frame. Cross Members are

designed with a patented

locking tab to be

turned into the post

for safety and rigidity.

SHELF BARS: SB 18, 24, 30, 32, 36, 48

Shelf Bars rest on upper edge of beam,

retained between posts

and shelves.

POSTS:

Slots on 2” centres, covering 3

sides. Half slot on top for flush

mounted top shelf.

POST SPLICERS:

Steel splice (2 per joint) are

used to extend height of

post. Splicers are designed

to force-fit into the hollow

sections of the post.

STEEL SHELVES (full size, painted):

SH All standard sizes up to 24” x 48”

Front and back edges are channel formed

and drop over front & back beams

providing extra strength (beam plus

shelf capacity).

PARTICLE BOARD SHELVES:

5/8” Industrial Grade 45 lb. test particle

board is an ideal economical storage shelf

in conjunction with EASYUP beams. In

layouts all shelves are actual size.

P - Common Post

CM - Cross Member

LD - Light Duty Beam

MD - Medium Duty Beam

HD - Heavy Duty Beam

MSS - Shelf Support for MD Beam

HSS - Shelf Support for HD Beam

TB - Tie Bar

SB - Shelf Bar

SH - Steel Shelf

WMS - Wire Mesh Shelf

PB - Particle Board Shelf

DI - Drawer Insert

THE NEW GENERATION OF SHELVING

• Complete boltless and clipless for quickest

assembly.

• Accessibility from all sides since no “X” braces

required.

• Common Posts reduce cost for

Add-On Units.

• Shelves can be easily re-adjusted after being

installed.

• Back to back installation without gap and tight

against a wall.

• Post and Cross Members lock together in both

planes to form a rigid end frame with high load

capacities.

• Knocked down type end frames allow for height,

capacity and depth adjustability at any time.

• Diverse accessories allow for expansion without

using more floor space.

• EASYUP is shipped knocked down to reducing

freight costs.

ARCHIVE STORAGE

EASYUP 7000 Shelving Systems provide most economical storage of Banker Boxes (letter and legal size)

Tapes, X-Rays, and Medical Records. Beam sizes and capacity have been specifically developed for

maximum storage utilization.

Application: Store boxes single height and depth.

Further Space Savings: Store boxes double high and double deep.

High Rise: Heavy Duty end frames allow for Mezzanines and High Rise

Picker Systems.

Access: From all sides and back to back units.

STANDARD BANKER BOX UNITS

SHELF SIZE (in) CONFIGURATION NO. OF BOXES SHELF CENTRES

15” x 66” 1 deep/2 high 10 24”30” x 66” 2 deep/2 high 20 24”

* Capacities based on 35 lbs. per box Box Size 13”w x 15”3/4”d x 101/4”h

GARMENT AND RETAIL BULK STORAGE

EASYUP 7000 garment and display racks allow garment rods and storage shelves to

be integrated into any unit.

Installation: Rods either fixed permanently at specific heights or boltless

for quick adjustability.

High Capacity Rods: Available for heavy garments; lengths up to 72”.

LIGHT DUTY BEAMS: LD 36, 42, 48, 60

Single locking clip. V-type design to

support shelf. 1 1/4” front face.

MEDIUM DUTY BEAMS: MD 36, 42,

48, 60, 66, 72

Double locking clip. 90° return bend

to support the shelf. 2” front

face.

HEAVY DUTY BEAMS: HD 48, 60, 66,

72, 96

Double locking clip. 90° return bend to

support the shelf. 2 1/2” face

front.

CUSTOMIZED STORAGE SYSTEMS AVAILABLE:

Mobile Storage Systems Registry Storage

Medical Record Storage Art and Artifacts Storage

Radiology Storage Rolling Stock and Carts

Tape, Cassette and Reel Storage Drug and Food Storage

Hanging Storage Fabric and Garment Storage

Firearms and Evidence Storage Display Storage

Map Storage Tool Storage

SAFETY CLIPS:Spring clip locks Beam into the post slots

for safety. Can be removed easily.

Recommended for uneven floors

and for mezzanine applications on

bottom & top beams of lower

units.

AISLE SUPPORT CLIPS:Used to attached catwalk support (slotted

angle) to Posts.

Straight or 90° Angle

FOOT PLATES:

Foot plates clip into tube section of post

to disperse weight on tile or wood

floors, etc. Foot plates are punched

for lagging to floor, if required.

A5

EASYU P 7000 S H E LV I N G SYSTE M SSTO R AG E SYSTE M S

EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS

EASYU P 7000 S H E LV I N G SYSTE M SC O M PO N E NTS

ADVAN C E D FEATU R E S

LONG SPAN SHELVING (BULK STORAGE)

EASYUP 7000 is the ideal universal shelving system designed for hand loading of

large size or heavy merchandise. It features open accessibility from all sides as no

cross bracing is required.

Shelf Size Range: From12” x 36” to 48” x 96”

Capability of 96” x 96” with back to back units.

Beam Variety: Selection from the most economical beam to 2000 lbs. load

capacity per level.

FOUR MAIN COMPONENTS

Common Posts:

Are 12 gauge, one piece impact resistant and squared for strength with rounded

corners for safety. Posts are slotted on 2” centres for Beams and have holes on 6”

centres for back to back bolting, wall anchoring or for aid in Beam positioning. For

High-Rise Systems or 3 Tier Mezzanines, Posts can be doubled up at lower levels for

increased load capacities.

Cross Members:

Are “Z” shaped, with a patented Safety Locking Tab which can be unlocked again to

interchange sizes and adjust depths.

Beams:

Double-Hook Beams on top and bottom provide complete lateral rigidity without the

interference and cost of braces. Three types of Beams are available from single to

double hooking heavy duty Beams, to match shelf load requirements with minimum

Beam size.

Shelves:

Are re-inforceable with Shelf Support and Tie Bars.

Particle Board Shelves offer strength with economy.

Wire Mesh Shelves allow passage of air, light and water and will not retain dust

or debris.

TIE BARS: TB 18, 24, 30, 32, 36, 48

Clip into the bottom lip of a pair of

beams, preventing beams

from “bowing out”

under load.

SHELF SUPPORTS FOR MD BEAMS:

MSS 18, 24, 30, 32, 36, 48

Designed to support shelves at any

point locking into upper lip of

beam.

SHELF SUPPORTS FOR HD BEAMS:

HSS 24, 30, 36, 48

Shelf Supports lock into the upper

lip of a pair of beams.

CROSS MEMBERS:

Cross Member and posts form a rigid end

frame. Cross Members are

designed with a patented

locking tab to be

turned into the post

for safety and rigidity.

SHELF BARS: SB 18, 24, 30, 32, 36, 48

Shelf Bars rest on upper edge of beam,

retained between posts

and shelves.

POSTS:

Slots on 2” centres, covering 3

sides. Half slot on top for flush

mounted top shelf.

POST SPLICERS:

Steel splice (2 per joint) are

used to extend height of

post. Splicers are designed

to force-fit into the hollow

sections of the post.

STEEL SHELVES (full size, painted):

SH All standard sizes up to 24” x 48”

Front and back edges are channel formed

and drop over front & back beams

providing extra strength (beam plus

shelf capacity).

PARTICLE BOARD SHELVES:

5/8” Industrial Grade 45 lb. test particle

board is an ideal economical storage shelf

in conjunction with EASYUP beams. In

layouts all shelves are actual size.

P - Common Post

CM - Cross Member

LD - Light Duty Beam

MD - Medium Duty Beam

HD - Heavy Duty Beam

MSS - Shelf Support for MD Beam

HSS - Shelf Support for HD Beam

TB - Tie Bar

SB - Shelf Bar

SH - Steel Shelf

WMS - Wire Mesh Shelf

PB - Particle Board Shelf

DI - Drawer Insert

THE NEW GENERATION OF SHELVING

• Complete boltless and clipless for quickest

assembly.

• Accessibility from all sides since no “X” braces

required.

• Common Posts reduce cost for

Add-On Units.

• Shelves can be easily re-adjusted after being

installed.

• Back to back installation without gap and tight

against a wall.

• Post and Cross Members lock together in both

planes to form a rigid end frame with high load

capacities.

• Knocked down type end frames allow for height,

capacity and depth adjustability at any time.

• Diverse accessories allow for expansion without

using more floor space.

• EASYUP is shipped knocked down to reducing

freight costs.

ARCHIVE STORAGE

EASYUP 7000 Shelving Systems provide most economical storage of Banker Boxes (letter and legal size)

Tapes, X-Rays, and Medical Records. Beam sizes and capacity have been specifically developed for

maximum storage utilization.

Application: Store boxes single height and depth.

Further Space Savings: Store boxes double high and double deep.

High Rise: Heavy Duty end frames allow for Mezzanines and High Rise

Picker Systems.

Access: From all sides and back to back units.

STANDARD BANKER BOX UNITS

SHELF SIZE (in) CONFIGURATION NO. OF BOXES SHELF CENTRES

15” x 66” 1 deep/2 high 10 24”30” x 66” 2 deep/2 high 20 24”

* Capacities based on 35 lbs. per box Box Size 13”w x 15”3/4”d x 101/4”h

GARMENT AND RETAIL BULK STORAGE

EASYUP 7000 garment and display racks allow garment rods and storage shelves to

be integrated into any unit.

Installation: Rods either fixed permanently at specific heights or boltless

for quick adjustability.

High Capacity Rods: Available for heavy garments; lengths up to 72”.

LIGHT DUTY BEAMS: LD 36, 42, 48, 60

Single locking clip. V-type design to

support shelf. 1 1/4” front face.

MEDIUM DUTY BEAMS: MD 36, 42,

48, 60, 66, 72

Double locking clip. 90° return bend

to support the shelf. 2” front

face.

HEAVY DUTY BEAMS: HD 48, 60, 66,

72, 96

Double locking clip. 90° return bend to

support the shelf. 2 1/2” face

front.

CUSTOMIZED STORAGE SYSTEMS AVAILABLE:

Mobile Storage Systems Registry Storage

Medical Record Storage Art and Artifacts Storage

Radiology Storage Rolling Stock and Carts

Tape, Cassette and Reel Storage Drug and Food Storage

Hanging Storage Fabric and Garment Storage

Firearms and Evidence Storage Display Storage

Map Storage Tool Storage

SAFETY CLIPS:Spring clip locks Beam into the post slots

for safety. Can be removed easily.

Recommended for uneven floors

and for mezzanine applications on

bottom & top beams of lower

units.

AISLE SUPPORT CLIPS:Used to attached catwalk support (slotted

angle) to Posts.

Straight or 90° Angle

FOOT PLATES:

Foot plates clip into tube section of post

to disperse weight on tile or wood

floors, etc. Foot plates are punched

for lagging to floor, if required.

A6

WIRE SHELVINGWIRE SHELVING• Heavy-gauge chrome-plated shelves with open wire design minimize dust,

improve air circulation and provide greater visibility of stored items• Post's circular grooves combined with tapered plastic split

sleeves allow for assembly in minutes with no special tools• Shelf ribs run front to back allowing items

to slide on and off shelves smoothly• Shelves can be adjusted at precise 1" intervals Posts are double grooved

every 8" and numbered for easy adjustment• Adjustable feet compensate for surface irregularities

Use S hooks to eliminate two posts per adjacent shelf. 2 required per shelf.

Model Dimensions Cap lbs.* Wt.No. Type D" x W" x H" /Shelf lbs.4 SHELVESRL059 Starter 18 x 36 x 63 800 48RL060 Add-on 18 x 36 x 63 800 3.5RL061 Starter 18 x 48 x 63 800 58RL062 Add-on 18 x 48 x 63 800 53.5RL063 Starter 18 x 60 x 63 600 81RL064 Add-on 18 x 60 x 63 600 76.5RL065 Starter 18 x 72 x 63 600 91RL066 Add-on 18 x 72 x 63 600 86.5RL067 Starter 24 x 36 x 63 800 62RL068 Add-on 24 x 36 x 63 800 57.5RL069 Starter 24 x 48 x 63 800 74RL070 Add-on 24 x 48 x 63 800 69.5RL071 Starter 24 x 60 x 63 600 95RL072 Add-on 24 x 60 x 63 600 90.5RL073 Starter 24 x 72 x 63 600 117RL074 Add-on 24 x 72 x 63 600 112.55 SHELVESRL075 Starter 18 x 36 x 74 800 67.75RL076 Add-on 18 x 36 x 74 800 58.25RL077 Starter 18 x 48 x 74 800 80.25RL078 Add-on 18 x 48 x 74 800 70.75RL079 Starter 18 x 60 x 74 600 109RL080 Add-on 18 x 60 x 74 600 99.5RL081 Starter 18 x 72 x 74 600 121.5RL082 Add-on 18 x 72 x 74 600 112RL083 Starter 24 x 36 x 74 800 85.25RL084 Add-on 24 x 36 x 74 800 75.75RL085 Starter 24 x 48 x 74 800 100.25RL086 Add-on 24 x 48 x 74 800 90.75RL087 Starter 24 x 60 x 74 600 126.5RL088 Add-on 24 x 60 x 74 600 117RL089 Starter 24 x 72 x 74 600 154RL090 Add-on 24 x 72 x 74 600 144.5* Evenly distributed weight

COMPLETE SHELVING UNITS

POSTSModel No. Height" Wt. lbs.RL161 54 6.3RL162 63 7RL163 74 8RL164 86 8.8

WIRE SHELVESModel Dimensions Cap lbs.* Wt. No. D" x W" /Shelf lbs.RL035 18 x 30 800 8.5RL036 18 x 36 800 9.75RL037 18 x 48 800 1.25RL038 18 x 60 600 18RL039 18 x 72 600 20.5RL040 24 x 36 800 13.25RL041 24 x 48 800 16.25RL042 24 x 60 600 21.5RL043 24 x 72 600 27* Evenly distributed weight

ACCESSORIESModel No. Description Wt. lbs.RL048 Caster, 5", No Brake 2.8RL049 Caster, 5", With Brake 2.7RL050 Divider for Shelf, 18" 1.7RL051 Divider for Shelf, 24" 2.2RL052* Handle 18" - Can Only be Used With Utility Carts 3.9RL053* Handle 24" - Can Only be Used With Utility Carts 4.4RL054 Split Sleeves, Black 4 Pc/Bag 0.1RL055 S-Hook for Attaching Add-On 0.1RL056 Leveling Feet (Die Cast and Foot Bolt) 0.2RL057 Die Cast for Leveling Feet 0.1RL058 Foot Bolt for Leveling Feet 0.1*Note: 18" and 24" handle can only be used with utility carts

RL056

RL161

RL050

RL048

RL049

RL054

be assembled as you wish: End to End, at Right Angles or any combination.

be assembled as you wish: End to End, at Right Angles or

RL055

wire shelving can

A7

B

ulk Storage W

ine Shelving

SUPER ERECTA SHELF®

BULK STORAGE WINESHELVING

• High Density: Bulk storage wine shelving permitsstorage of a large quantity of wines in a limited space —an average of one case per linear foot (305mm) ofshelf.

• Four Standard Units: Four standard units areavailable, all 14” (355mm) wide:36” long x 743/4” high — holds 12 cases of 750ml bottles(910mm long x 1900mm high)

36” long x 863/4” high — holds 15 cases of 750ml bottles(910mm long x 2200mm high)

48” long x 743/4” high — holds 16 cases of 750ml bottles(1220mm long x 1900mm high

48” long x 863/4” high — holds 20 cases of 750ml bottles(1220mm long x 2200mm high))

• Store Wines Securely: Units are enclosed by back andside panels which keep bottles secure and preventaccidents. For security from loss or pilferage, optionaldoors, which can be locked with a padlock, areavailable for the 16-case unit.

• Bottles Held At Proper Angle: Support inserts whichfit on every shelf hold bottles at an upward slant of 10°keep corks moist while allowing bottles to be stackedsafely.

• Helps Control Temperature: Open wire constructionpermits air flow, which is critical in maintaining theproper temperature in the environmentally-controlledatmosphere of many wine cellars.

• Holds Different Size Bottles: Diagonal wire dividerscreate bins, each of which holds a case when onstandard spacing. With shelves at the recommended15” (380mm) apart, however, dividers can be placedwherever desired to create smaller or larger bins.

• High Visibility: Open wire keeps bottles and labelshighly visible for easy reading and selection. Units stayclean longer, because there is less surface area wheredust can accumulate.

• Stable: All posts are fitted with triangular foot plateswhich bolt the units to the floor for greater stability. Inaddition, two wall clamps are provided with each unit,which hook under the top shelf and can be secured withfasteners suitable to the wall.

• Chrome-Plated Finish: Attractive and clean.Close-Up View of Divider

A8

SUPER ERECTA SHELF®

BULK STORAGE WINE SHELVING*

DIMENSIONS: Overall Approx.

Width Length Height Pkd. Wt. CapacityCat. No. (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg) (Cases of 750ml bottles)

WB237C 14 355 36 910 743/4 1899 138 63 12

WB238C 14 355 36 910 863/4 2203 168 76 15

WB257C 14 355 48 1220 743/4 1899 168 76 16

WB258C 14 355 48 1220 863/4 2203 204 93 20

Bul

k S

tora

ge W

ine

She

lvin

g

SPECIFICATIONS:

• Model WB237C: Consists of five14” x 36” (355 x 910mm)chrome-plated Super ErectaShelf® wire shelves (1436NC);four 743/4” (1900mm) posts withfoot plates (74FPC); 12 diagonaldividers (BD15C); four bottlesupport inserts (BS3C); two endpanels (EP27C); two backpanels (BP27C); and two wallclamps (9984C).

• Model WB238C: Consists of six14” x 36” (355 x 910mm)chrome-plated Super ErectaShelf® wire shelves (1436NC);four 863/4” (2200mm) posts withfoot plates (86FPC); 15 diagonaldividers (BD15C); five bottlesupport inserts (BS3C); two endpanels (EP28C); two backpanels (BP28C); and two wallclamps (9984C).

• Model WB257C: Consists of five14” x 48” (355 x 1220mm)chrome-plated Super ErectaShelf® wire shelves (1448NC);four 743/4 (1900mm) posts withfoot plates (74FPC); 16 diagonaldividers (BD15C); four bottlesupport inserts (BS5C); two endpanels (EP27C); three backpanels (BP27C); and two wallclamps (9984C).

• Model WB258C: Consists of six14” x 48” (355 x 1220mm)chrome-plated Super ErectaShelf® wire shelves (1448NC);four 863/4” (2200mm) posts withfoot plates (86FPC); 20 diagonaldividers (BD15C); five bottlesupport inserts (BS5C); two endpanels (EP28C); three backpanels (BP28C); and two wallclamps (9984C).Model WB257C with Door Accessory

ACCESSORIES:Door Set — 1 set per carton.

Approx.Width Height Pkd. Wt.

Cat. No. (in.) (mm) (in.) (mm) (lbs.) (kg) Fits Unit

ED57C 51 1295 60 1524 42 19 WB257C

Joining Hook — To be used when units are placed back-to-back orend-to-end.

Width Depth Height.Cat. No. (in.) (mm) (in.) (mm) (ins.) (mm)

JH2C 21/32 17 15/8 41 21/4 57

A9

®

SUPER

EREC

TA SH

ELF®

Cradle W

ine Shelving

®

METRO SUPER ERECTA SHELF®

WIREVCRADLE WINE SHELVING*• Safe Storage of Wines: Each bottle is supported

individually in a cradle formed by the wires of theshelf, so it cannot roll or bump against adjacentbottles. The top of the wire “snake” acts as anatural back stop when placing bottles on theshelf.

• High Visibility: Open wire construction keepsbottles and labels highly visible for easy readingand selection. Units stay clean longer, becausethere is less surface area where dust canaccumulate.

• Permits Proper Air Flow: Open wire permits air tocirculate freely around the bottles, which is criticalin maintaining the proper temperature in a winecellar or other environmentally controlled room.

• Easy Access: Open wire design, with shelvesspaced 5" (127mm) apart, provides easy accessto bottles for loading or removal.

• Large Capacity: Cradle wine shelving is availablein four standard units, all 14" (355mm) wide:

36" (910mm) long x 743/4" (1899mm) high36" (910mm) long x 863/4" (2203mm) high48" (1220mm) long x 743/4" (1899mm) high48" (1220mm) long x 863/4" (2203mm) high36" (910mm) long shelves hold nine

750ml bottles;48" (1220mm) long shelves hold twelve

750ml bottles.743/4" (1899mm) high units have 14 shelves;863/4" (2203mm) high units have 17 shelves.

• Stable: All posts are fitted with triangular footplates which bolt the units to the floor for greaterstability. In addition, two wall clamps are providedwith each unit, which hook under the top shelf andcan be secured with fasteners suitable to the wall.

• Quick, Secure Assembly: Super Erecta Shelf®

construction means assembly is fast and simple,with no special tools needed. Patented split sleevedevice assures a strong, secure fitting.

• Chrome-Plated Finish: Attractive and clean.

Close-up of “Cradle” Design

*Patent Pending

A10

METR0 SUPER ERECTA SHELF®

WIRE CRADLE WINE SHELVING

®

0.4

8C

radl

e W

ine

She

lvin

®

Manufactured by:

Specifications• Model WC237C: Consists of fourteen 14"x36" (355x910mm) chrome-plated Super Erecta Shelf ® wire cradle shelves

(W1436NC); four 743/4" (1899mm) chrome-plated posts with triangular foot plates (74FPC); and two wall clamps (9984C).

• Model WC238C: Consists of seventeen 14"x36" (355x910mm) chrome-plated Super Erecta Shelf ® wire cradle shelves(W1436NC); four 863/4" (2203mm) chrome-plated posts with triangular foot plates (86FPC); and two wall clamps (9984C).

• Model WC257C: Consists of fourteen 14"x48" (355x1220mm) chrome-plated Super Erecta Shelf ® wire cradle shelves(W1448NC); four 743/4" (1899mm) chrome-plated posts with triangular foot plates (74FPC); and two wall clamps (9984C).

• Model WC258C: Consists of seventeen 14"x48" (355x1220mm) chrome-plated Super Erecta Shelf ® wire cradle shelves(W1448NC); four 863/4" (2203mm) chrome-plated posts with triangular foot plates (86FPC); and two wall clamps (9984C).

DimensionsWidth/Length Overall Height Approx. Pkd. Wt. Capacity

Cat. No. (in.) (mm) (in.) (mm) (lbs.) (kg) (750ml bottles)

WC237C 14x36 355x910 743/4 1899 112 51 126WC238C 14x36 355x910 863/4 2203 133 60 153WC257C 14x48 355x1220 743/4 1899 133 60 168WC258C 14x48 355x1220 863/4 2203 160 73 204

Joining HooksTo be used when units are placed back-to-back or end-to-end.

Accessories for Enclosed UnitsDoor Set

Width/Height Approx. Pkd. Wt.Cat. No. (in.) (mm) (lbs.) (kg) Fits Only

ED57C 51x60 1295x1524 42 19 WC257C

End PanelsWidth/Height Approx. Pkd. Wt. Use With

Cat. No. (in.) (mm) (lbs.) (kg) Posts

EP27C 13x60 330x1524 10.5 4.8 74FPCEP28C 13x75 330x1905 12.5 5.7 86FPC

Other AccessoriesBack Panels

Width/Height Approx. Pkd. Wt. Use WithCat. No. (in.) (mm) (lbs.) (kg) Posts

BP27C 141/2x60 368x1524 11 5.0 74FPCBP28C 141/2x75 368x1905 13 5.9 86FPC

Width/Depth/HeightCat. No. (in.) (mm)

JH2C 21/32x15/8x21/4 17x41x57

Continuous Label HoldersSnap over shelf edge.Provides means ofidentifying contents ofshelf or shelf section.Molded plastic. Labelsnot included.

Label SizeCat. No. (in.) (mm)

9990P 3x11/4 75x329990P1 13x11/4 330x329990P2 19x11/4 480x329990P30 25x11/4 635x329990P3 31X11/4 725X329990P4 43x11/4 1090x329990P5 55x11/4 1395x32

Wall ClampsCat. No. 9984C

TemplateFor assembling bin shelving. Included in standard unit.Request #C5-077.

14" (355mm) Wall MountsBoth types of wine shelves can be wall mounted.See Spec Sheet 10.40 for 14" (355mm) direct andpost-type wall mounts.

A11

induStrial Steel ShelvingBOltleSS Shelving SySteMMain FeatureS:• No-boltshelfdesignsavesupto80%ofinstallationtime

• Shelvesaremadeof18-gaugesteelwitha630lbs.cap.(36"W)and315lbs.cap.(48"W)forevenlydistributedloads

• Extrashelvesmaybeaddedtostandardunitstoincreasestoragecapacities

• Shelvesareadjustableon2"centres• AllunitsshippedknockeddowntosavefreightNote:Addoneinchtooveralldimensions

ofthefinishedunitdueto"T"designoftheendposts

An adjustable shelving system that provideshigh strength, yet economical storage capacityfor your plant,warehouse or office.This systemuses an innovative shelf clip, which slips into aslotted "T" post and is immediately ready toreceiveashelf.Thisreducesinstallationtimeupto80% of the time required to assemble standardnuts and bolts shelving units. Order from ourstandardmodel numbers and the shelvingunitswill include, components as well as accessoriesrequiredforassembly.

RK271

RK849

RK341

RK877

RK311

to orderDeterminetheheight,thenumberofshelvesandtheshelfdimensionsthatsuityourapplication.Ifmultiple units are able to be connected, orderonestarterunitandtherestadd-onunits.Orderextra shelves if more are needed. Industrialshelving components can be used to create awidearrayof shelvingarrangements thatmeetspecificrequirements.

A12

induStrial Steel ShelvingAvailable components include:

(1) "T" Posts -Foropenstyleshelving,includesslotsevery 11/2" forshelf orbrace installation.

(2) Shelves -Shelvesareeasilyinstalledontopostsorendpanelsusingfourshelfclipsprovided pershelf.

(3) Shelf Clips -Provide aloadbearing capacityhigher thanmostbolted shelving systems.

(4) End Panels -Forclosed styleshelving,eachpanelincorporatestwoslotted posts initsdesign.

(5) Back Panels -Attach easily toendpanels usingbackbrackets provided.

(6) Brackets for Back Panels -Firmly attach backpanels toendpanels.

(7&8) Side & Back Braces -Providestabilitytoopenstyle shelving units. Sold inpairs.

(9) Base Plates -Install atfloorlevel tocloseopenings.

(10) Label Holders -Install onshelf fronttoidentify contents ofshelves.

(11) Bin Dividers -Separateshelvesintobincompartments 20gauge.

(12) Bin Fronts -Used inconjunctionwithbindividers.

(13) Shelf Boxes -Slideontoproperlyspacedshelving,with100%extensionwithoutspills.2dividers provided perbox,24gauge.

(14) Doors (not shown) -Lockableswingingdoorsinstall easily onclosed style shelving units.

3

1

2

10

13

11

7

12

Model Wt. No. Dimensions lbs.t PoStSRK550 6'4" H 8.0RK551 7'4" H 9.0RK548 8'4" H 10.0ShelveSRK552 36" W x 12" D 8.0RK558 36" W x 18" D 12.0RK561 36" W x 24" D 15.0RK554 48" W x 12" D 11.0RK560 48" W x 18" D 15.0RK563 48" W x 24" D 19.0end PanelSRK522 12" D x 6'4" H 21.0RK537 18" D x 6'4" H 24.0RK530 24" D x 6'4" H 27.0RK523 12" D x 7'4" H 23.5RK538 18" D x 7'4" H 27.0RK531 24" D x 7'4" H 31.0BaCK PanelSRK470 36" W x 6'4" H 19.0RK468 48" W x 6'4" H 25.5RK471 36" W x 7'4" H 22.0RK469 48" W x 7'4" H 29.5BraCeSRK472 (Back Braces, Pair) 4.0RK565 (Side Braces, Pair) 2.0

Model Wt.No. Dimensions lbs.Bin dividerSRK503 12" D x 6" H 0.5RK505 18" D x 6" H 1.0RK506 24" D x 6" H 1.5RK491 12" D x 12" H 1.3RK493 18" D x 12" H 2.0RK494 24" D x 12" H 2.8ShelF BoXeSRK566 5 5/8" W x 12" D x 2 3/4" H 2.5RK569 5 5/8" W x 18" D x 2 3/4" H 3.5RK570 5 5/8" W x 12" D x 4 3/4" H 3.5RK573 5 5/8" W x 18" D x 4 3/4" H 4.5RK574 11" W x 18" D x 4 3/4" H 5.0doorS (SetS)RK575 36" W x 6'4" H 43.0RK576 36" W x 7'4" H 50.0MiSCellaneouSRC392 36" W Base Plate 2.0RC394 48" W Base Plate 2.5RK540 36" W Label Holder 0.3RK542 48" W Label Holder 0.3RK475 1" x 36" Bin Front 1.8RK477 2" x 36" Bin Front 2.0RK479 3" x 36" Bin Front 2.5RC499 36" Front & Back Shelf Reinforcement, sold per pair 1 RC503 48" Front & Back Shelf Reinforcement, sold per pair 1RC515 Shelf Clip 0.01RC382 Back to Back Brackets 0.01 RK949 Foot Plate - RL432 Back Panel Clip -GuSSetSRC453 Pairs -

9

A13

Contains:3Bays36"Widex24"High

Contains: 3Bays36"Widex24"High

Contains: 3Bays36"Widex24"High CompletewithLocking, SwingingDoors

Contains: 6Bays36"Widex12"High CompletewithLocking, SwingingDoors

Contains: 2Bays36"Widex12"High 6Bays36"Widex8"High CompletewithLocking, SwingingDoors

Contains: 6Bays36"Widex12"High Contains: 9Bays36"Widex8"High Contains: 12Bays36"Widex6"High

Contains:6Bays36"Widex12"High Contains:9Bays36"Widex8"High Contains:12Bays36"Widex6"High

Contains: 2Bays36"Widex12"High 8Bays36"Widex6"High CompletewithLocking, SwingingDoors

Depth" Starter Unit Add-On Unit12 RK849 RK85218 RK850 RK85324 RK851 RK854

Depth" Starter Unit Add-On Unit12 RK855 RK85818 RK856 RK85924 RK857 RK860

Depth" Starter Unit Add-On Unit12 RK957 RK95218 RK954 RK95324 RK956 RK955

Depth" Starter Unit Add-On Unit12 RK958 RK96018 RK961 RK95924 RK963 RK962

Depth" Starter Unit Add-On Unit12 RK205 RK20418 RK207 RK20624 RK209 RK208

Depth" Starter Unit Add-On Unit12 RK217 RK21618 RK219 RK21824 RK221 RK220

Depth" Starter Unit Add-On Unit12 RK229 RK22818 RK231 RK23024 RK233 RK232

Depth" Starter Unit Add-On Unit12 RK241 RK24018 RK243 RK24224 RK245 RK244

Depth" Starter Unit Add-On Unit12 RK211 RK21018 RK213 RK21224 RK215 RK214

Depth" Starter Unit Add-On Unit12 RK235 RK23418 RK237 RK23624 RK239 RK238

Depth" Starter Unit Add-On Unit12 RK247 RK24618 RK249 RK24824 RK251 RK250

Note:Individualbayheightsareapproximate.

Depth" Starter Unit Add-On Unit12 RK223 RK22218 RK225 RK22424 RK227 RK226

Contains:3Bays48"Widex28"High Contains:6Bays48"Widex14"High Contains:3Bays48"Widex28"High Contains:6Bays48"Widex14"High

induStrial Steel Shelving unitS - 48" Wide x 7'4" high

Depth" Starter Unit Add-on Unit12 RK285 RK284 18 RK287 RK286 24 RK289 RK288

Depth" Starter Unit Add-on Unit12 RK297 RK29618 RK299 RK29824 RK301 RK300

Depth" Starter Unit Add-on Unit12 RK291 RK29018 RK293 RK29224 RK295 RK294

Depth" Starter Unit Add-on Unit12 RK303 RK30218 RK305 RK30424 RK307 RK306

induStrial Steel Shelving unitS - 36" Wide x 6'4" high

induStrial Steel Shelving

A14

induStrial Steel Shelving

induStrial Steel Shelving unitS - 36" Wide x 7'4" high

Depth" Starter Unit Add-On Unit12 RK980 RK97918 RK982 RK981

Depth" Starter Unit Add-On Unit12 RK277 RK276 18 RK886 RK983

Depth" Starter Unit Add-On Unit12 RK986 RK89118 RK890 RK987

Depth" Starter Unit Add-On Unit12 RK279 RK27818 RK281 RK28024 RK283 RK282

Depth" Starter Unit Add-On Unit12 - RK86418 - -24 RK967 RK866

Depth" Starter Unit Add-On Unit12 RK970 RK96918 RK868 RK971

Depth" Starter Unit Add-On Unit12 RK871 RK97318 RK976 RK97524 RK978 RK977

Depth" Starter Unit Add-On Unit12 RK877 RK87918 RK878 RK880

Depth" Starter Unit Add-On Unit12 RK253 RK25218 RK255 RK25424 RK257 RK256

Depth" Starter Unit Add-On Unit12 RK259 RK25818 RK261 RK26024 RK263 RK262

Depth" Starter Unit Add-On Unit12 RK265 RK26418 RK267 RK26624 RK269 RK268

Depth" Starter Unit Add-On Unit12 RK271 RK27018 RK273 RK27224 RK275 RK274

Contains: 1Bay36"Wx12"H 6Compartments

18"Wx12"H 1Bay36"Wx24"H CompletewithLocking,

SwingingDoors

Contains: 108MetalShelfBoxes (drawers)

55/8"Wx23/4"H

Contains: 36MetalShelfBoxes (drawers)

11"Wx43/4"H

Contains: 42MetalShelf Boxes(drawers)

55/8"Wx43/4"H 15MetalShelfBoxes

(drawers)11"Wx43/4"H

Contains: 72Compartments 6"Wx6"H

Completewith1" Bin-Fronts

Contains: 72MetalShelf Boxes(drawers) 55/8"Wx43/4"H

Contains: 4Compartments 18"Wx12"H 9Compartments 12"Wx12"H

1Bay36"Wx12"H

Contains: 18Compartments 12"Wx12"H

Contains: 72Compartments 6"Wx6"H

Contains: 2Bays36"Wx24"H 4Compartments

18"Wx12"H

Contains: 18Compartments 6"Wx6"H completewith1"BinFronts 30Metal Shelf Boxes (drawers) 55/8"Wx43/4"H 6Compartments 12"Wx2"H completewith3"BinFronts

Contains: 18Compartments 12"Wx12"H CompletewithLocking, SwingingDoors

Depth" Starter Unit Add-On Unit12 RK333 RK33218 RK335 RK33424 RK337 RK336

Depth" Starter Unit Add-On Unit12 RK321 RK32018 RK323 RK32224 RK325 RK324

Depth" Starter Unit Add-On Unit12 RK345 RK34418 RK347 RK34624 RK349 RK348

Contains:3Bays 36"Wide x28"High Contains:6Bays36"Widex14"High Contains:7Bays36"Widex12"High Contains:14Bays36"Widex6"High

Depth" Starter Unit Add-On Unit12 RK309 RK30818 RK311 RK31024 RK313 RK312

induStrial Steel Shelving unitS - 36" Wide x 6'4" high

Note:Individualbayheightsareapproximate.

A15

induStrial Steel ShelvinginduStrial Steel Shelving unitS - 36" Wide x 7'4" high

Contains:3Bays36"Wx28"H

Contains:3Bays36"Wx28"HCompletewithLocking,SwingingDoor

Contains:6Bays36"Wx14"HCompletewithLocking,SwingingDoors

Contains: 7Bays36"Wx12"H CompletewithLocking, SwingingDoors

Contains:6Bays36"Wx14"H Contains:7Bays36"Wx12"H Contains:14Bays36"Wx6"H

Contains: 8Bays36"Wx6"H 3Bays36"Wx12"H CompletewithLocking, SwingingDoors

Depth" Starter Unit Add-On Unit12 RK315 RK31418 RK317 RK31624 RK319 RK318

Depth" Starter Unit Add-On Unit12 RK339 RK33818 RK341 RK34024 RK343 RK342

Depth" Starter Unit Add-On Unit12 RK327 RK32618 RK329 RK32824 RK331 RK330

Depth" Starter Unit Add-On Unit12 RK351 RK35018 RK353 RK35224 RK355 RK354

Depth" Starter Unit Add-On Unit12 RK893 RK89618 RK894 RK89724 RK895 RK898

Depth" Starter Unit Add-On Unit12 RK899 RK90218 RK900 RK90324 RK989 RK904

Depth" Starter Unit Add-On Unit12 RK991 RK99018 RK993 RK99224 RL020 RL021

Depth" Starter Unit Add-On Unit12 RK996 RK99518 RK998 RK99724 RL001 RK999

Note:Individualbayheightsareapproximate.

Depth" Starter Unit Add-On Unit12 RK357 RK35618 RK359 RK35824 RK361 RK360

Depth" Starter Unit Add-On Unit12 RK363 RK36218 RK365 RK36424 RK367 RK366

Depth" Starter Unit Add-On Unit12 RK369 RK36818 RK371 RK37024 RK373 RK372

Depth" Starter Unit Add-On Unit12 RK905 RK90818 RK906 RK90924 RK907 RK910

Depth" Starter Unit Add-On Unit12 RK911 RK91418 RK912 RK91524 RK913 RK916

Depth" Starter Unit Add-On Unit12 RK917 RK91918 RK918 RK920

Depth" Starter Unit Add-On Unit12 RK921 RK92418 RK922 RK92524 RK923 RK926

Depth" Starter Unit Add-On Unit12 RK927 RK92918 RK928 RK930

Contains: 2Bays36"Wx28"H 4Compar tments 18"Wx14"H

Contains: 4Compartments 18"Wx14"H 9Compartments 12"Wx14"H 1Bay36"Widex14"High

Contains: 21Compartments 12"Wx12"H

Contains: 84Compartments 6"Wx6"H

Contains:1Bay36"Wx14"H 6Compartments18"Wx14"H 1Bay36"Wx28"H CompletewithLocking, SwingingDoors

Contains: 21Compartments 12"Wx12"H CompletewithLocking, SwingingDoors

Contains: 84MetalShelfBoxes (drawers) 55/8"Wx43/4"H

Contains:9Compartments12"W,12"H completewith3"Compartments fronts 18Compartments 6"Wx6"H completewith1"Compartment fronts30MetalShelfBoxes (drawers)55/8"Wx43/4"H

A16

induStrial Steel Shelving

Depth" Starter Unit Add-On Unit12 RK931 RK93318 RK932 RK934

Depth" Starter Unit Add-On Unit12 RK935 RK93718 RK936 RK938

Depth" Starter Unit Add-On Unit12 RK939 RK94118 RK940 RK942

Depth" Starter Unit Add-On Unit12 RK383 RK38218 RK385 RK38424 RK387 RK386

Contains: 126MetalShelfBoxes (drawers) 55/8"Wx23/4"H

Contains:42MetalShelfBoxes (drawers) 11"Wx43/4"H

Contains:84Compartments 6"Wx6"H Completewith1" CompartmentFronts

Contains:54MetalShelfBoxes(drawers) 55/8"Wx43/4"H 15MetalShelfBoxes(drawers) 11"Wx43/4"H

induStrial Steel Shelving unitS - 36" Wide x 7'4" high

induStrial Steel Shelving unitS - 36" Wide x 8'4" high

Depth" Starter Unit Add-On Unit12 RK389 RK38818 RK391 RK39024 RK393 RK392

Depth" Starter Unit Add-On Unit12 RK401 RK40018 RK403 RK40224 RK405 RK404

Depth" Starter Unit Add-On Unit12 RK413 RK41218 RK415 RK41424 RK417 RK416

Depth" Starter Unit Add-On Unit12 RK425 RK42418 RK427 RK42624 RK429 RK428

Depth" Starter Unit Add-On Unit12 RK395 RK39418 RK397 RK39624 RK399 RK398

Depth" Starter Unit Add-On Unit12 RK407 RK40618 RK409 RK40824 RK411 RK410

Depth" Starter Unit Add-On Unit12 RK419 RK41818 RK421 RK42024 RK423 RK422

Depth" Starter Unit Add-On Unit12 RK431 RK43018 RK433 RK43224 RK435 RK434

Depth" Starter Unit Add-On Unit12 RK437 RK43618 RK439 RK43824 RK441 RK440

Depth" Starter Unit Add-On Unit12 RK443 RK44218 RK445 RK44424 RK447 RK446

Depth" Starter Unit Add-On Unit12 RK449 RK44818 RK451 RK45024 RK453 RK452

Depth" Starter Unit Add-On Unit12 RK455 RK45418 RK457 RK45624 RK459 RK458

Contains: 6Bays36"Wx16"H

Contains: 1Bay36"Wx16"H 12Compartments

12"Wx14"H 1Bay36"Wx24"H

Contains: 24Compartments 12"Wx12"H

Contains: 48Compartments 9"Wx8"H

Contains: 1Bay36"Wx12"H 12Compartments 18"Wx14"H

Contains: 8Bays36"Wx12"H Contains: 12Bays36"Wx8"H Contains: 4Bays36"Wx24"H

Open TypeContains: 4Bays36"Wx24"H

Open TypeContains: 8Bays36"Wx12"H

Open TypeContains: 6Bays36"Wx16"H

Open TypeContains: 12Bays36"Wx8"H

Note:Individualbayheightsareapproximate.

A17

SlOtted angle Shelving

RH701

Corner GuSSet Plate • Addstrengthandrigiditytoyourslottedangleassembly• 3"Wx3"LModel No. RG994

PlaStiC Feet • Accomodatesingleordouble13/8"x13/8"anglepostsModel No. RG237 Singlepost

Model No. RG238 Double"T"post

Steel Slotted anGle allowS you to deSiGn & Build anythinG to your own SPeCiFiCationS:

aCCeSSorieSModel No. Description Wt. lbs.RG994 Corner Gusset Plate 3" 0.70RG995 Nut and Bolt 0.05RG996 Boltless Shelf Clip 0.60RG237 Plastic Foot (simple post) 0.02RG238 Plastic Foot (double post) 0.03

SlOtted angle aCCeSSOrieS

Metal Decking Tubing Storage Overhead Storage Overhead Storage Wide Storage Special Work Benches

RG994

RG996

RG237

RH774

Type 225 2 1/2" x 1 5/8"

Type 300 3" x 1 1/2"

Type 140 1 3/8" x 1 3/8"

All shelving units include 4 posts (1 3/8" x 1 3/8" slotted angle), shelves, panels (for closed units), plastic feet and all necessary hardware.

Model Dimensions Steel Wt.No. W" x D" x H" Gauge Colour UDL* lbs.

Slotted anGle PoSt (14 GauGe)RG979 1 3/8 x 1 3/8 x 8 14 Grey — 6RG980 1 3/8 x 1 3/8 x 10 14 Grey — 7RG981 1 3/8 x 1 3/8 x 12 14 Grey — 8.5RG982 2 1/2 x 1 5/8 x 8 14 Grey — 9RG983 2 1/2 x 1 5/8 x 10 14 Grey — 11RG984 2 1/2 x 1 5/8 x 12 14 Grey — 13RG320 3 x 1 1/2 x 10 12 Galvanised — 14RG321 3 x 1 1/2 x 12 12 Galvanised — 17

ShelveS (20 GauGe)RG985 12 x 36 — 20 Galvanised 450 7RG986 15 x 36 — 20 Galvanised 450 8.3RG987 18 x 36 — 20 Galvanised 450 9.6RG988 24 x 36 — 20 Galvanised 450 12.2RG989 32 x 42 — 18 Galvanised 300 23.7RG990 12 x 48 — 20 Galvanised 350 9.2RG991 15 x 48 — 20 Galvanised 350 10.9RG992 18 x 48 — 20 Galvanised 350 12.6RG993 24 x 48 — 19 Galvanised 400 18.5*UDL:

Maximum uniformly distributed load allowance where maximum shelf deflection is fully recovered when load is removed.

SlOtted angle Shelving• Idealforshelvingandstoragesystems,workbenches,tubingstorage,protectiveframingaroundmachinery,platformsaroundassemblyprojects,etc.

• Choosefromthevariouscomponentsavailable,orpre-configuredshelfunits

• Unique boltless clipdesign allows foradjustabilityofshelveseasilyandeffortlessly

• Toensurestability,itisrecommendedthat3shelflevelsareboltedwhenusingboltless clips

Side PanelSModel Dimensions Steel Wt.No. W" x H" Gauge lbs.RH759 12 x 72 24 7RH760 18 x 72 24 11RH761 24 x 72 24 15RH762 12 x 84 24 8RH763 18 x 84 24 13RH764 24 x 84 24 17RH765 12 x 96 24 10RH766 18 x 96 24 14RH767 24 x 96 24 19

BaCK PanelSModel Dimensions Steel Wt.No. W" x H" Gauge lbs.RH768 36 x 72 24 22RH769 48 x 72 24 29RH770 36 x 84 24 25RH771 48 x 84 24 34RH772 36 x 96 24 29RH773 48 x 96 24 38

KiCK PanelSRH792 36 x 3 20 1.3RH793 48 x 3 20 1.7

Slotted anGle ShelvinG 6 Shelves/72" Post 7 Shelves/84" Post 8 Shelves/96" Post Size Model No. Model No. Model No.W" x L" Open Closed Open Closed Open Closed12 x 36 RH701 RH774 RH707 RH780 RH713 RH78618 x 36 RH702 RH775 RH708 RH781 RH714 RH78724 x 36 RH703 RH776 RH709 RH782 RH715 RH78812 x 48 RH704 RH777 RH710 RH783 RH716 RH78918 x 48 RH705 RH778 RH711 RH784 RH717 RH79024 x 48 RH706 RH779 RH712 RH785 RH718 RH791

A18

raCking & Shelving unitS

Starter Unit

Add-On Unit

24" ShelF dePth 36" ShelF dePth 48" ShelF dePth

Size Cap. Model Wt. Model Wt. Model Wt. W' x H' Description lbs. No. lbs. No. lbs. No. lbs. 7 x 8 Starter 1400 RA443 245 RA475 288 RA507 331 7 x 8 Add-on 1400 RA441 217 RA473 258 RA505 299 7 W Add'l shelf 1400 RA470 63 RA502 76 RA534 89 8 x 10 Starter 2000 RA453 302 RA485 351 RA517 400 8 x 10 Add-on 2000 RA451 268 RA483 315 RA515 362 8 W Add'l shelf 2000 RA471 78 RA503 93 RA535 108 8 x 12 Starter 2000 RA463 316 RA495 365 RA527 414 8 x 12 Add-on 2000 RA461 275 RA493 322 RA525 369 8 W Add'l shelf 2000 RA471 78 RA503 93 RA535 108

prOntO Bulk StOrage raCkS• Upto2000lbs.capacitypershelf• Starterunitincludestwoall-weldedendframes,andthree5/8"presswoodshelvesflush-fitted intopositivelockingsteelshelfbeams(2pershelf)

• Add-onunitsincludeonlyoneendframe• Additional shelvesmaybeaddedintoanyunitat4"verticalcentres• Forextrastabilityandrigidity,allunitsfeaturethreesafetybarspershelf• Blueenamelfinish• Rackonlyunits(nowoodshelves)areavailableuponinquiry

Note:Notrecommended forpoweredlifttruckapplications.

Assembles quickly without bolts

• Idealsolutionforstorageoflargeandbulkyitems• Designed toworkwithoutnutsandboltswhichallowsforassemblyinminutes• Shelvesareadjustableamong11/2"increments• Optionalparticleboarddeckpanelscombineeconomyandstrengthandareeasytoinstall• Unitscomestandardwithsturdy84"high,14-gaugepostsandlefttorightbeamsaswellas16gaugefronttobackbeams

• Doublerivetedbeamslockintocornerpoststoeliminatebackandsidesway• Durablebakedgrayenamelfinishtoresistrustandcorrosion• Shippedknockeddown

Bulk StOrage raCk

3 levels 4 levels Particle Board Deck Dimensions Shelf cap Model Wt. Model Wt. Model. Wt. W" x D" x H" lbs No. lbs. No. lbs. No. lbs.48 x 24 x 84 1200 RL124 62 RL139 74 RL154 2048 x 36 x 84 1200 RL125 68 RL140 82 RL155 2948 x 48 x 84 1200 RL126 74 RL141 90 RL156 3960 x 24 x 84 1000 RL127 72 RL142 88 RK016 2560 x 36 x 84 1000 RL128 78 RL143 96 RK019 3760 x 48 x 84 1000 RL129 84 RL144 104 RL157 4972 x 24 x 84 750 RL130 74 RL145 90 RK017 2972 x 36 x 84 750 RL131 80 RL146 98 RK020 4472 x 48 x 84 750 RL132 86 RL147 106 RL158 5996 x 24 x 84 800 RL136 98 RL151 122 RK018 3996 x 36 x 84 800 RL137 104 RL152 130 RK021 5996 x 48 x 84 800 RL138 110 RL153 138 RL159 7896 x 24 x 84 600 RL133 86 RL148 106 RK018 3996 x 36 x 84 600 RL134 92 RL149 114 RK021 5996 x 48 x 84 600 RL135 98 RL150 122 RL159 78

Easyassembly:Onlyamalletisneeded

A19

StOrage raCkSBar StOrage raCkSAllsteelverticalandhorizontal racksareidealforstoringbars,tube,pipeandangle.Economicalknocked-downdesignreducesstorageandshippingcosts.

CoMBination vertiCal raCK• Storesbarsupto12'longandfeatures3shelvesforextrastorageofsmallparts

• 8"deeparmsdividedinto3sections• Basesize:36"x24"• Height:84"• Capacity:3000lbs.• DurableKletonblueenamelfinish• Wt.:128lbs.Model No. RB959

horiZontal Bar raCK• Storesbarsupto10'long• 9"deeparmswith9storagelevelsat6"intervals

• Capacity:1800lbs.• Base:30"sq.• Height:84"

• Wt.:68lbs.Model No. RB958

MinitreetM Cantilever raCk• Light-dutyadjustablearmcantilever rack• Efficientstorageofplastics,conduit,extrusions,hydraulic tubing,etc.

• Capacity/arm: 250lbs.• O.A.Dim.:36"Wx181/4"Dx761/4"H(single);36"Wx30"Dx761/4"H(double)

• Shippedknockeddown

Quik-tree® Cantilever raCk• Idealforstorageofsteel,iron,aluminum,woodorplasticpipe

• Seven14"armspercolumnsideandadjustableon11/2"centres

• Capacity/arm: 500lbs.• O.A.Dim.:36"Wor72"Wx21"Dx84"H(single);36"Wor72"Wx34"Dx84"H(double)

• Shippedknockeddown

pOrtaBle StaCking raCkS• Ahighlyflexiblestoragesystemthatisexpandable inlength,widthandheight• Sturdy,yetlightweight, easyforonepersontoassemble• Allweldedsteelconstruction requiresnotoolsorfittings

RB959

RB958

RL383

RB951

Model Overall Dimensions Cap Wt. No. W" x D" x H" lbs. lbs.RB952 12 x 16 x 13 1/2 2500 18RB953 14 x 19 x 17 3700 25.5RB964 15 x 22 x 20 1/2 5600 31RB965 16 x 26 x 23 1/2 7500 44

Brace Set Cap. lbs/ Model No. Wt. Model No. Wt.Description L' Column Starter lbs. Add-on lbs.Single-Sided, 14 Arms 3 3500 RG631 237 RG632 135Double-Sided, 28 Arms 3 7000 RG633 345 RG634 189Single-Sided, 14 Arms 6 3500 RB177 255 RB176 153Double-Sided, 28 Arms 6 7000 RB173 363 RB172 207

Model Capacity Wt.No. Description lbs/Column lbs.RG621 Single-Sided, 14 Single Arms 1750 165RG622 Double-Sided, 14 Double Arms 3500 215

StaCking raCkS• Utilizewarehouseairspaceandlowerthechancesofdamage thatisassociatedwithbulkstacking.• Designedforstorageoflooseandpalletizedgoods.• Ruggedall-welded2"sq.tubingsteelconstruction• Holds4000lbsperrackandcanbestacked4high• Postsandbasesaresoldseparately

RL416

RL414 with 2 RL419

Model Inside Dim Overall Dim Wt. No. W" x D" W" x D" lbs.oPen BaSeRL414 44 x 38 42 x 48 85RL415 48 x 44 48 x 48 90CloSed BaSe RL416 44 x 38 42 x 48 110RL417 48 x 44 48 x 48 115

aCCeSSorieSModel Overall Dim Wt. No. Description W" x H" lbs.RL418 42" Side Rail 42 x 48 30RL419 48" Side Rail 48 x 48 32RL420 42" Upright Post-Pack of 4 2 x 42 35RL421 48" Upright Post-Pack of 4 2 x 48 40RL422 60" Upright Post-Pack of 4 2 x 60 50

vertiCal Bar raCK• Verticallystoresbarsupto10'long• Four-24"deepdividers• 3000lbs.capacity• All-weldedsteelconstruction

Model Overall Dim Wt. No. W" x D" x H" lbs.RL383 48 x 24 x 60 100

Standard vertiCal Sheet raCk• All-weldedsteelconstruction• Designedforverticallystoringsheetgoods• Constructedofheavygaugesteel11/4"tubeforbaysandaheavygaugesteel1"x2"rectangulartubefortheframe

• Eachbaycanholdupto1000lbs.• Capacity:4000lbs.

Model Overall Dim Number Distance Wt. No. W" x D" x H" of Bays Between Bays" lbs.RL384 84 x 50 x 36 4 10 200

MoBile PiPe & Bar raCK• Safelystoresupto1000lbs.ofmaterial• Folds tocompact sizeof61"x34"x151/2"• Features4racklevelswithcurvededgestopreventpipefromrollingoff

• Constructedofstructuralsquaretubing• 2swiveland2rigid,6"hardrubbercasters • O.A.Dim.:581/2"Wx34"Dx58"H• Wt.:100lbs.Model No. RB951

• Durable blueenamelfinish

• Durableblueenamelfinish

• Durableblueenamelfinish

• Durableblueenamelfinish

A20

NORTH AMERICAN STEEL

OVER 50 YEARS OF

DESIGN AND PRODUCTION

EXPERIENCE BUILT INTO IT

NAS PALLET RACKING

A21

Pick RackRetail Fixture Rack

Double Deep Selective RackingSelective Pallet Racking

NAS PALLET RACKING provides the widest range of flexibility for your palletand heavy - duty bulk storage needs. Stocking vertically and horizontallymaximizes available space without crushing inventory with the ability toaccess each individual load. Only two basic components, beams and frames,are required in a variety of sizes according to load requirements up to100,000 Lbs. NAS Pallet Racking installs quickly without tools and adjustseasily to your specific needs.

Features100% SelectivityEasy picking lower levelsGood storage densityEasily relocated

ApplicationsWarehouses & LogisticsManufacturing PlantsFood & Grocery DistributionPetroleum, Chemical &Pharmaceutical Plants

NAS DOUBLE DEEP RACKING features back to back pallet storage twopallets deep. Ideal for increased storage densityrequirements where lifttrucks have extended reach capabilityEasily converted to or from singleselective rack.

Features50% SelectivityMinimal increased lift truck costsIncreased Storage CapacityEasily relocated

ApplicationsWarehouses& LogisticsManufacturing PlantsFood & Grocery DistributionPetroleum, Chemical &Pharmaceutical Plants

RETAIL RACK gives retailers an upscale warehouse look whiledisplaying more SKU's plus overhead stock replenishmentstorage. More and more retai lers are converting to thew a r e h o u s e s t y l e s u p e r s t o r e s . T h e s a m e m a r k e t i n gadvantages can be achieved in any size store. Specializedcomponents are available to display anything from tubs to hand tools to

garden equipment are stocked. Pallet Rack can be installed over orintegrated into store fixture shelving.

FeaturesLess expensive than traditionalstore fixturesVery versatile for displayingmerchandiseSupports pegboard, wire baskets,metal or wood shelves andall types of vendor displays

ApplicationsBuilding Supply andHardware RetailersLarge Outlet StoresSmall and Mid Sized Retailerswho require additionalmerchandising space

Pick Rack is ideal for hand case picking. Rack frames and beams re designedto meet your specific product size and weights. Ful pallets can be storedabove with independent access for lift trucks. Pick Rack boltlessconnections facilitate quick and simple assembly and adjustability. Stepbeams provide a smooth shelf surfaceusing roof deck, metal panels, cutlumber or wire mesh decks.

FeaturesOptimum Combined Selectivityand Bulk Storage CapacityWide Variety of accessories toaccommodate special storageneeds safer, cleaner and moreconvenient storage

ApplicationsBanker Box Record StorageHospital Records StorageAutomotive Parts DistributorsIndustrial Supply DistributorsPlumbing/Electrical Distributors

A22

Rollformed End frames

ENDFRAME OPTIONS

Double Post

Cant-Leg Frame

A Double post transfers the axial load to the second post ifthe front post is damaged.

Angles the front aisle post away from the aisle to preventaccidental damage from pallet entry on the lower level.

Heavy Duty Lower Brace

Angle Deflector with/without cap

Structural Column Insert

Recessed Frame

Heavy duty lower braces transfer frontal impact energy tothe back post of the end frame.

An angle deflector is welded to the endframe. This angledeflects the lift truck forks away from the endframe. It isavailable with or without a cap. The benefit of a cap is stopdebris from compiling between the angle and the endframecolumn.

With this design a structural C-Channel is inserted inside thecolumn and welded in place (usually to the first beam level).This increases the impact resistance of the column as theenergy from an impact is transferred to the structuralcolumn.

The front aisle post is recessed to allow greater aisleclearance for lift truck turning and pallet entry.

Capacities from 25,000 to 100,000 lbs, with a safety factor of2.0.

Our 2” & 3” depth 14, 13 & 12 gauge post with 10 vertical bendsprovides greater impact, shock load and over load resistance.

The unique rear returns on our posts improve rigidity andstrength without wasting width of shelf space while creating asafer section.

Our tubular bracing is stronger than simple channels and lesslikely to be damaged or to cause injury. The horizontal bracing iswelded at both ends against the front and rear endframe column.This design creates a stronger section to resist accidental forkliftimpact.

Our 6-point wrap-around beam connector at both ends supportseach beam at 12 points on the endframe. The beam connectorautomatically squares the beam to the frame for ease ofinstallation and rigidity.

Double PostedEndframe

Heavy DutyLower Brace

Angle Deflectorwithout a cap

Structural Column insert(cut away view)

Recessed FrameCant-Leg Frame

EF 214Endframe

EF 313Endframe

A23

PALLET RACK provides the widest range of flexibility for your pallet and heavy-duty storage needs. Stockingvertically and horizontally maximizes available space without crushing inventory, while having the ability toaccess each individual load. Only two basic components, beams and frames, are required in a variety of sizesaccording to load requirements up to 100,000 lbs. NAS Pallet Racking installs quickly without tools and re-adjusts easily for specific applications.Colour: Sky Blue & NL Orange Total length of upright is punched on 3" centres. Beams may be

Placed a minimum of 9” apart unless our 6” bracket is For Layout add: used on lower capacity beams.3 1/2” for each frame used in row.

Punching pattern permits flush placement of top beamSTANDARD SIZES: with top of frame.HEIGHTS: 72” to 288” in 12” IncrementsDEPTHS: 24” to 60” in 6” Increments All bracing is rectangular tube for extra strength.Special sizes are available

Heavy guage footplates distribute the upright loadOver 14 sq. in. minimum.

SELECTIVE PALLET RACKING

END FRAMES

A24

TO ORDER PALLET RACKING:Make every inch of your storage space count by combining standard sized uprights and beams (Box Type or Step Type) tocreate a racking system that is customized to your needs.1. Determine rack depth: For 48” deep pallets, order 42” rack depth. For 40” or 42” deep pallets, order 36” rack depth.2. Determine rack height: Rack should be 6” less than the maximum lift of your lift truck forks.3. Select from standard systems combining uprights, stringers, and accessories.

ApplicationsWarehouses & LogisticsManufacturing PlantsFood & Grocery DistributionPetroleum, Chemical &Pharmaceutical Plants

PALLET RACK - BOX BEAMSCOLOUR: SKY BLUE & NL ORANGE

Capacity per pair of Beams is based on uniformly distributed load over 2 beams:Safety Factor: L/180 for deflection: 1.67 for yield Beam length is equal to distance between beam brackets. Todetermine required beam length, add 4" between pallet to pallet and pallet to frame. Allow additional clearance ifthe load overhangs pallets. Two locking safety pins (#3241) rated for 3000 lbs disengagementforce are provided N/C with every beam.

Performance of RackingSystem Bulk Storage Selective Pallet

Rack

Selectivity of individual pallets40% 100%

Use of floor space 80% 50%

Utilization of pallet posting 70% 98%

Speed of access and throughput 80% 80%

Stock rotation (FIFO) 40% 60%

Use of building height 30% 80%

Efficient Bottom Level Case Picker No Yes

Ease of relocation 100% 100%

System adjustability 100% 100%

Specialist handling equipment No No

Box Beams have full 1 1/2" or 1 3/4" top lip for easy palletloading. Heavy guage Beam Connectors each have 6 pointwrap-around connections for even load distribution andautomatic Frame to Beam squaring.

PALLET RACK - STEP BEAMS 5ECOLOUR: SKY BLUE & NL ORANGE

Beams have a full 1 7/8" top lip for easy pallet loading, plus a 1 5/8" deep notched step able to accept a widevariety of accessories. Heavy gauge Beam Connectors feature 6 point wrap-around connections for even load dis-tribution and automatic Frame to Beam Squaring. Capacity per pair of Beams is based on uniformly distributedload. Safety Factor: L/180 for deflection: 1.67 for yeild.

Beam length is equal to distance between Frames. To determine Beamlength add 4" between Pallet to Pallet and Pallet to Frames. Allow addi-tional clearance if the load overhangs Pallets. Two locking Safety Clips#3241 are provided N/C with every Beam to withstand 3000 lbs disen-gagement force.

END FRAMES

A25

STRUCTURALBEAMS

C-Channel Structural BeamsC-Channel beams are recommended for heavy traffic andhigh abuse areas, (i.e. front beams on push back and flowrack). The structural shape places the most amount of steelon the face and face corners to prevent damage at impact.To obtain the full rated capacity C-Channels require tie barsto prevent rotation.

I-Beams offer the same features of the C-Channel beamsbut support greater load carrying capacity over longerspans.

Wide Flange Structural Beams

ALL BEAMS are available for both structural and rollformed endframes. The only change is the type of connectorthat is used to attach the beam to the column.All beams have a safety factor of 1.67.

STANDARD SAFETY CLIPS, supplied with each beam, resist accidental uplift of up to 2,000 lbs. per beam.Attachable self-locking spring clips are available. Bolts may also be used for special applications.

PAINT FINISH All NAS rack is powder coated over properly cleaned and iron phosphate etched surface. Ovenbaked to proper temperature/time ratio to produce a durable scratch resistant finish.

Beams

!

STEP BEAM

A one-piece multi-purpose beam with a rolled-insteppierced to accommodate safety bars, shelf supports andother unique accessories. Full 1 7/8" top face for superiorpallet support.

Our one-piece rollformed tube provides strength and safety.The seam of our beam is at the rear under the step,preventing accidental forklift or pallet "hooking".

Our 3" deep bracket allows us to weld our beams front andrear.

BOX BEAM

Ideal for heavy pallet loading, tunnel-bays with 3 pallet loading orwhere reduced beam height is necessary. The pair of nestedC-Channels allow more steel in a smaller section.

Applications: Tunnel bays with 3 pallet loading where beamheight is critical.

A26

TO ORDER PALLET RACKING:Make every inch of your storage space count by combining standard sized uprights and beams (Box Type or Step Type) tocreate a racking system that is customized to your needs.1. Determine rack depth: For 48” deep pallets, order 42” rack depth. For 40” or 42” deep pallets, order 36” rack depth.2. Determine rack height: Rack should be 6” less than the maximum lift of your lift truck forks.3. Select from standard systems combining uprights, stringers, and accessories.

ApplicationsWarehouses & LogisticsManufacturing PlantsFood & Grocery DistributionPetroleum, Chemical &Pharmaceutical Plants

Selective Pallet Racking

Capacity per pair of Beams is based on uniformly distributed load over 2 beams:Safety Factor: L/180 for deflection: 1.67 for yield Beam length is equal to distance between beam brackets. Todetermine required beam length, add 4" between pallet to pallet and pallet to frame. Allow additional clearanceif the load overhangs pallets. Two locking safety pins (#3241) rated for 3000 lbs disengagementforce are provided N/C with every beam.

Performance of RackingSystem Bulk Storage Selective Pallet

Rack

Selectivity of individual pallets40% 100%

Use of floor space 80% 50%

Utilization of pallet posting 70% 98%

Speed of access and throughput 80% 80%

Stock rotation (FIFO) 40% 60%

Use of building height 30% 80%

Efficient Bottom Level Case Picker No Yes

Ease of relocation 100% 100%

System adjustability 100% 100%

Specialist handling equipment No No

Box Beams have full 1 1/2" or 1 3/4" top lip for easy palletloading. Heavy guage Beam Connectors each have 6 pointwrap-around connections for even load distribution andautomatic Frame to Beam squaring.

COLOUR: SKY BLUE & NL ORANGE

Beams have a full 1 7/8" top lip for easy pallet loading, plus a 1 5/8" deep notched step able to accept a widevariety of accessories. Heavy gauge Beam Connectors feature 6 point wrap-around connections for even load dis-tribution and automatic Frame to Beam Squaring. Capacity per pair of Beams is based on uniformly distributedload. Safety Factor: L/180 for deflection: 1.67 for yeild.

Beam length is equal to distance between Frames. To determine Beamlength add 4" between Pallet to Pallet and Pallet to Frames. Allow addi-tional clearance if the load overhangs Pallets. Two locking Safety Clips#3241 are provided N/C with every Beam to withstand 3000 lbs disen-gagement force.

PALLET RACK - BOX BEAMSCOLOUR: SKY BLUE & NL ORANGE

PALLET RACK - STEP BEAMS

A27

DOUBLE DEEP RACKNAS DOUBLE DEEP RACKING features back-to-backpallet storage two pallets deep. Ideal for increasedstorage density requirements where lift trucks haveextended reach capability. Easily converted from or tosingle selective rack.• 50% increased storage capacity• Minimal increased lift truck cost• Reasonably good selectivityBeams have a full 3/4" top lip

plus a 3/4" step for plywood,drop in panels, wire mesh and1" lumber.

2" Beam must be hand loadedonly. Capacity is based on uni-formly distributed load.

Safety Bars - Medium orHeavy DutySafety bars sit flush in pre-slottedstep beams to stop improperlyplaced pallets from falling betweenbeams. They prevent spreading onextra wide racks under heavyloads. 2 safety bars per pallet po-sition are mandatory on installa-tions over 16 ft. high. Safety bars

RowSpacersAre used for back-to-backrows to tie the endframestogether for stability andconsistent spacing. They willalso support in-rack sprin-kler systems. Mandatoryinstallation:1 for 10', 2 for 22',3 for 26' etc.

Wall TiesThey position single rows froma column or wall to protectagainst endframe dislodge-ment. Mandatory for singlerows of 10 ft. and higher.

DividersDivides a bay into sections forseparating molding, doors,conduit, siding, lumber orother vertically stored prod-ucts. Available in Heavy Dutyversions for doors or heavierproducts. Standard sizes from24"x4" to 72"x36". Clamps fitover the rear beam.

Drum CradlesDesigned to adapt racking tohold round objects. The unit iscompletely welded and fits se-curely on beams.

Wire Mesh DecksCombine ease of installationwith high strength. Standardfinish is zinc-plated corrosionresistant finish (also availablepainted).

Features50% SelectivityMinimal increased lift truckcostsIncreased Storage CapacityEasily relocated

ApplicationsWarehouses& LogisticsManufacturing PlantsFood & Grocery DistributionPetroleum, Chemical &Pharmaceutical Plants

STEP BEAMS

A28

NAS DOUBLE DEEP RACKING features back-to-backpallet storage two pallets deep. Ideal for increasedstorage density requirements where lift trucks haveextended reach capability. Easily converted from or tosingle selective rack.• 50% increased storage capacity• Minimal increased lift truck cost• Reasonably good selectivityBeams have a full 3/4" top lip

plus a 3/4" step for plywood,drop in panels, wire mesh and1" lumber.

2" Beam must be hand loadedonly. Capacity is based on uni-formly distributed load.

Safety bars sit flush in pre-slottedstep beams to stop improperlyplaced pallets from falling betweenbeams. They prevent spreading onextra wide racks under heavyloads. 2 safety bars per pallet po-sition are mandatory on installa-tions over 16 ft. high. Safety bars

Are used for back-to-backrows to tie the endframestogether for stability andconsistent spacing. They willalso support in-rack sprin-kler systems. Mandatoryinstallation:1 for 10', 2 for 22',3 for 26' etc.

They position single rows froma column or wall to protectagainst endframe dislodge-ment. Mandatory for singlerows of 10 ft. and higher.

Divides a bay into sections forseparating molding, doors,conduit, siding, lumber orother vertically stored prod-ucts. Available in Heavy Dutyversions for doors or heavierproducts. Standard sizes from24"x4" to 72"x36". Clamps fitover the rear beam.

Designed to adapt racking tohold round objects. The unit iscompletely welded and fits se-curely on beams.

Combine ease of installationwith high strength. Standardfinish is zinc-plated corrosionresistant finish (also availablepainted).

Features50% SelectivityMinimal increased lift truckcostsIncreased Storage CapacityEasily relocated

ApplicationsWarehouses& LogisticsManufacturing PlantsFood & Grocery DistributionPetroleum, Chemical &Pharmaceutical Plants

ACCESSORIES

Heavy DutySafety Bars - Medium or RowSpacers

Wire Mesh DecksDividers

DOUBLE DEEP RACK

Drum CradlesWall Ties

A29

Designed to allow unrestricted front access for longand irregular shaped products without front uprightinterference. The columns act as backstops and fluespace for sprinklers and water penetration. Productsrest on flat or tapered arms for easy loading. Lifttruck forks have easy entry for un-palletized loads.Base legs provide stability and keep the product offthe floor. Posts are punched to accept arms on bothsides.

Push-Back Rack provides high density storage with good selectivity. Multiple Pallets are stored on a gravity-fedcart system, allowing retrieval of the pallets from the face of the rack. The carts support the pallets, allowing forsome variation in pallet sizes. Systems are custom designed as 2, 3, 4 or 5 pallets deep and are normally usedagainst a wall or in back-to-back rows.

Front to back rails replace standard beams to support pallets. Lift trucks access pallets by driving into lanes. Ina Drive-In system pallet loading and retrieval is from the same aisle and is used where last in/first out (LIFO)principle is acceptable. Drive-In is ideal for stocking a single designated product per tunnel. Ideal to maximizestorage space against a wall.DRIVE THRU SYSTEMIn a Drive-Thru system, pallet loading and retrieval can be from aisles at either end and is used where first in/first out (FIFO) principle is desirable. Drive-Thru is ideal for FASTER moving products per tunnel.

EASYUP 7000This can easily be extended to provide multiple storage levels whereceiling heights permit. Economical method to add storage withoutadding floor space by either: extending your existing (or new) shelv-ing by installing a Catwalk System to reach the upper level; or plac-ing complete Mezzanine floor over your existing (or new) shelving,using the upper floor for storage. Stairs, and rail, rop zones, safetygates and conveyors are available for maximum efficiency.

Structural Mezzanine Storage PlatformsSelf supported by NAS easily add a second or third level to your existingwarehouse to provide efficient use of otherwise unused ceiling space. Thiscan be done at a fraction of the cost of new building space or even mov-ing. The column centres can range from 12’ to 20’.The flooring can be roof deck and plywood, open steel planking, bar gratingor roof deck and checker plate, depending on loading requirements, andlocal building codes. Accessories are hand rails, multiple stairs, loadinggates and landings. Also, lifts, conveyors, and other material handlingequipment can easily be added to provide a full fledged and efficient sys-tem.

Rack Supported Storage PlatformsThey can either be a full upper floor or a complete catwalk system on multilevels. Features like vertical lifts, stair towers and elevators as well as parti-tions - with integrated fencing for added security - can be added. Upper lev-els can accept full pallets for quick handling. Systems can easily be inte-grated with conveyor systems for cartons or tote handling to upper levels.Highrise Racking supported systems are ideal for inactive systems such asfile, record and museum storage. Systems can be started small and addedor reconfigured, if need arises. Easily disassembled and relocated. Maxi-mum use of empty air space by building upwards. Storage areas can be in-creased without additional building construction. Existing columns andother obstructions can be worked into the layout plan. Minimal disruptionof production during installation. Avoid rental, building or purchasing addi-tional space.

Uses standard rack componentsfor light duty applicions. Mosteconomical for light loads and isrecommended for up to 12 ftheight only. Maximum armlength of 24”, adjustable on 3”centres. Ideal for reel racks,hand loaded bar or long narrowtrim or pipe. Powder coatedfinish, Capacity up to 500 lbsper arm. Arm length of 9”, 12”,18” and 24”. All arms attachedwith a double bracket connec-tion. All arms have welded endstop. Available in single & dou-ble sided configuration. Reelholding capacity up to 2,500 lbsper reel

Strong, durable, fully adjust-able system. Used mainly forbulky relatively light weighthome furnishings (chairs,couches, tables, desks,dressers & cabinets). Allowsstorage shelving withoutfront obstructions, with soliddeck covering the entirelength of the rack row, loadsof varying lengths can beplaced anywhere along theentire storage area. Durableconstruction for low mainte-nance and longer servicelife. Minimizes storage spaceand construction costs, util-izes higher lift height capac-ity of the latest handlingequipment. Allows for verti-cal adjustment of shelfheight without interruptionon the horizontal plane. Canincorporate optional guiderails for handling equipment.

CANT DECK RACK CANT BAR RACK

CANTILEVER RACK

PUSH BACK RACK

A30

CANTILEVER RACKDesigned to allow unrestricted front access for longand irregular shaped products without front uprightinterference. The columns act as backstops and fluespace for sprinklers and water penetration. Productsrest on flat or tapered arms for easy loading. Lifttruck forks have easy entry for un-palletized loads.Base legs provide stability and keep the product offthe floor. Posts are punched to accept arms on bothsides.

PUSH BACK RACKPush-Back Rack provides high density storage with good selectivity. Multiple Pallets are stored on a gravity-fedcart system, allowing retrieval of the pallets from the face of the rack. The carts support the pallets, allowing forsome variation in pallet sizes. Systems are custom designed as 2, 3, 4 or 5 pallets deep and are normally usedagainst a wall or in back-to-back rows.

Front to back rails replace standard beams to support pallets. Lift trucks access pallets by driving into lanes. Ina Drive-In system pallet loading and retrieval is from the same aisle and is used where last in/first out (LIFO)principle is acceptable. Drive-In is ideal for stocking a single designated product per tunnel. Ideal to maximizestorage space against a wall.

In a Drive-Thru system, pallet loading and retrieval can be from aisles at either end and is used where first in/first out (FIFO) principle is desirable. Drive-Thru is ideal for FASTER moving products per tunnel.

This can easily be extended to provide multiple storage levels whereceiling heights permit. Economical method to add storage withoutadding floor space by either: extending your existing (or new) shelv-ing by installing a Catwalk System to reach the upper level; or plac-ing complete Mezzanine floor over your existing (or new) shelving,using the upper floor for storage. Stairs, and rail, rop zones, safetygates and conveyors are available for maximum efficiency.

Self supported by NAS easily add a second or third level to your existingwarehouse to provide efficient use of otherwise unused ceiling space. Thiscan be done at a fraction of the cost of new building space or even mov-ing. The column centres can range from 12’ to 20’.The flooring can be roof deck and plywood, open steel planking, bar gratingor roof deck and checker plate, depending on loading requirements, andlocal building codes. Accessories are hand rails, multiple stairs, loadinggates and landings. Also, lifts, conveyors, and other material handlingequipment can easily be added to provide a full fledged and efficient sys-tem.

They can either be a full upper floor or a complete catwalk system on multilevels. Features like vertical lifts, stair towers and elevators as well as parti-tions - with integrated fencing for added security - can be added. Upper lev-els can accept full pallets for quick handling. Systems can easily be inte-grated with conveyor systems for cartons or tote handling to upper levels.Highrise Racking supported systems are ideal for inactive systems such asfile, record and museum storage. Systems can be started small and addedor reconfigured, if need arises. Easily disassembled and relocated. Maxi-mum use of empty air space by building upwards. Storage areas can be in-creased without additional building construction. Existing columns andother obstructions can be worked into the layout plan. Minimal disruptionof production during installation. Avoid rental, building or purchasing addi-tional space.

CANT BAR RACKUses standard rack componentsfor light duty applicions. Mosteconomical for light loads and isrecommended for up to 12 ftheight only. Maximum armlength of 24”, adjustable on 3”centres. Ideal for reel racks,hand loaded bar or long narrowtrim or pipe. Powder coatedfinish, Capacity up to 500 lbsper arm. Arm length of 9”, 12”,18” and 24”. All arms attachedwith a double bracket connec-tion. All arms have welded endstop. Available in single & dou-ble sided configuration. Reelholding capacity up to 2,500 lbsper reel

CANT DECK RACKStrong, durable, fully adjust-able system. Used mainly forbulky relatively light weighthome furnishings (chairs,couches, tables, desks,dressers & cabinets). Allowsstorage shelving withoutfront obstructions, with soliddeck covering the entirelength of the rack row, loadsof varying lengths can beplaced anywhere along theentire storage area. Durableconstruction for low mainte-nance and longer servicelife. Minimizes storage spaceand construction costs, util-izes higher lift height capac-ity of the latest handlingequipment. Allows for verti-cal adjustment of shelfheight without interruptionon the horizontal plane. Canincorporate optional guiderails for handling equipment.

DRIVE IN SYSTEM

DRIVE THRU SYSTEM

EASYUP 7000

STRUCTURAL MEZZANINE STORAGE PLATFORMS

RACK SUPPORTED STORAGE PLATFORMS

A31