With us, you get the most out of your construction work

RACK AND PINION ELEVATOR

TOTALLY AUTOMATED

Tecnipar product designed to ensure complete safety and conve-

nience for operators, as well as offering the customer the best cos-

t-benefi t ratio on the job.

Facility: motor and brake in one place and out of the car, facilita-

ting preventive maintenance on equipment and providing better

use of the fl oor space.

Safety, convenience and comfort: equipment in full compliance

with NR-18 and ABNT NBR 16200:2013 standards.

Differential and technical characteristics:

Control panel.

Positive opening lock.

Peripheral protection.

Operator cell.

Drive command button.

Drive system by electronic automation.

Automation by Encoder*.

Car with largest clear width on the market.

Door opening with clear width for palletized cargo.

Cargo limiting cells with beep.

Automatic stop levelling per fl oor.

Lock with positive opening and safety redundancy.

Communication between fl oors and operator.

Emergency sound device.

Damping springs and frequency inverters for smooth starts and stops.

Ladder and access hatch to the roof of the ca.

Parachute-type emergency brake.

Device that prevents the equipment operation if a door is open.

Possibility to install two cars.

Car and peripheral protections according to NR-12.

With internal or external operator cell.

12 month warranty (check manufacturer’s conditions).

Model ECT 15.30 / 1500

Drive Rack and Pinion

Car dimensions WxHxD 1,50 x 2,00 x 3,00 m

Cargo capacity 1500 kg

Power voltage/frequency 220/380/440 V – 60 Hz - three phase

Motor 2x10 cv or 2x7,5 kwa

Speed 28 m/min

Floor boom gates with clear width

1,5 m

Maximum height of structure 120 m

Weight and height of module (WxHxD)

110 kg / 0,74 x 1,508 x 0,74 m

Anchorage 6 inem 6 m

Consumption 15,7 kw

*Absolute encoder can memorize positions, and is used in more accurate applications.

*Mer

ely

illus

trat

ive

imag

e.