R3 Push-to-Close Latch · 2018-02-28 · R3-23-250-01 R3-23-250-02 R3-23-250-03 R3-23-250-04...

4
238 Dimensions in millimeters (inch) unless otherwise stated ACTUAL SIZE www.southco.com/R3 Mounting bracket (extended) Slide travel 16.5 (.65) Door thickness (extended bracket) 22 - 50 (.875 - 2.00) Door thickness (standard bracket) 32 - 50 (1.25 - 2.00) Mounting bracket (standard) 13 (.51) 18.2 (.72 ) 116 (4.57) Front flange 128.7 (5.07) Front flange 23.4 (.92) Multi-point rods (not supplied) 32.5 (1.28) Gasket 18.3 (.72) 15.1 (.59) Maximum rod movement Back View Ø 4 x 4 (.16) Rod B Rod A 51 (2.0) 13 (.51) Ø 4 (.16) 12 (.47) 7.1 (.28) 12 (.47) 7.1 (.28) Rod A Rod B Part Number Latch Finish Locking (CH751) (2 Flat Keys Included) Locking (Reversible Key) R001 (2 Flat Keys Included) Locking (No Core)* Non-Locking Chrome, polished R3-20-350-10 R3-20-320-10 R3-20-390-10 R3-20-300-10 Black powder coated R3-20-350-50 R3-20-320-50 R3-20-390-50 R3-20-300-50 White powder coated R3-20-350-70 R3-20-320-70 R3-20-390-70 R3-20-300-70 R3 Push-to-Close Latch Pull-to-open · Paddle handle · Baggage door latch Multi-Point Capable Actuating rods are not supplied Recommended rod configuration shown below Latch shown in actuated (unlatched) position (slide retracted) Plastic Clips: Part number: R4-0-43922 for 4mm rods are available as an option • Environmentally sealed • Emergency release • For use with R4 rotary latches Material and Finish Latch assembly: Zinc alloy, black or white powder coated or chrome plated Slide bolt: Zinc alloy, zinc plated Striker mounting plates and brackets: Steel, zinc plated Performance Details Maximum working load: 560 N (125 lbf) Installation Notes Maximum tightening torque on mounting screws: 2 Nm (14 inlbf) Notes *For lock core selection and a complete overview of the SOUTHCO ® Key-Choice System see page 158 Part Number Order latch, bracket and mounting screws separately. For latch see table For bracket and mounting screws see page 239 For applicable rotary latches see page 255. Other options available. For complete details on variety, part numbers, installation and specification, go to

Transcript of R3 Push-to-Close Latch · 2018-02-28 · R3-23-250-01 R3-23-250-02 R3-23-250-03 R3-23-250-04...

Page 1: R3 Push-to-Close Latch · 2018-02-28 · R3-23-250-01 R3-23-250-02 R3-23-250-03 R3-23-250-04 R3-23-250-05 16 (.625) Long 19 (.750) Long 25.4 (1.00) Long 32 (1.250) Long 38 (1.500)

238

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

www.southco.com/R3

Mountingbracket (extended)

Slide travel16.5 (.65)

Door thickness(extended bracket)22 - 50 (.875 - 2.00)

Door thickness(standard bracket)32 - 50 (1.25 - 2.00)

Mountingbracket (standard)

13(.51)

18.2 (.72 )

116 (4.57)Front flange

128.7 (5.07)Front flange

23.4 (.92)

Multi-pointrods (not supplied)

32.5 (1.28)

Gasket

18.3 (.72)

15.1 (.59)Maximum rod movement

Back View

Ø 4 x 4 (.16)Rod B

Rod A

51 (2.0)

13 (.51)Ø 4 (.16)

12 (.47)

7.1 (.28)

12 (.47) 7.1 (.28)

Rod A

Rod B

Part Number

Latch Finish Locking (CH751)(2 Flat Keys Included)

Locking (Reversible Key)R001 (2 Flat Keys

Included)Locking (No Core)* Non-Locking

Chrome, polished R3-20-350-10 R3-20-320-10 R3-20-390-10 R3-20-300-10

Black powder coated R3-20-350-50 R3-20-320-50 R3-20-390-50 R3-20-300-50

White powder coated R3-20-350-70 R3-20-320-70 R3-20-390-70 R3-20-300-70

R3 Push-to-Close LatchPull-to-open · Paddle handle · Baggage door latch

Multi-Point Capable

Actuating rods are not supplied Recommended rod configuration shown below

Latch shown in actuated (unlatched) position (slide retracted)

Plastic Clips: Part number: R4-0-43922 for 4mm rods are available as an option

• Environmentally sealed• Emergency release• For use with R4 rotary latches

Material and Finish Latch assembly: Zinc alloy, black or white powder coated or chrome plated

Slide bolt: Zinc alloy, zinc plated

Striker mounting plates and brackets: Steel, zinc plated

Performance DetailsMaximum working load: 560 N (125 lbf)

Installation NotesMaximum tightening torque on mounting screws: 2 Nm (14 inlbf)

Notes*For lock core selection and a complete overview of the SOUTHCO® Key-Choice System see page 158

Part NumberOrder latch, bracket and mounting screws separately.

For latch see table

For bracket and mounting screws see page 239

For applicable rotary latches see page 255.

Other options available. For complete details on variety, part numbers, installation and specification, go to

Page 2: R3 Push-to-Close Latch · 2018-02-28 · R3-23-250-01 R3-23-250-02 R3-23-250-03 R3-23-250-04 R3-23-250-05 16 (.625) Long 19 (.750) Long 25.4 (1.00) Long 32 (1.250) Long 38 (1.500)

239

Dimensions in millimeters (inch) unless otherwise stated www.southco.com/R3

85 (3.35)

100 (3.94)

150 (5.9)Door back

Channel formulti-point rods

22 - 50(.87 - 2.00)Door front

150 (5.9)

70 (2.76)Min.

25 (1.0) Slide

channel

12.5 (.5)

34(1.34)

30 (1.18)

85 (3.35)

100(3.94)

118 (4.65)Door back

Channel formulti-point rods

32 - 50 (1.26 - 2.00)

25 (1.0)

Door front

118 (4.65)BackPanel

9 (.35) 16.5 (.65)

1.5 - 9.5 (.06 - .375)

4 xØ 4.4 (.17)

71(2.8)

114.4 (4.50)68.5 (2.7)

97.4 (3.83)

105 (4.13)

29 (1.14)

23 (.90)

10 (.39) 127

(2.50)

1.4 (.06)10.9 (.43)

Optional slot (emergency egress handle)

4XØ 4.4 (.17) Typ

71(2.8)

114.3 (4.50)68.5

(2.70)89.3

(3.52)

159.2 (6.27)

29 (1.14)

22.9 (.90)10 (.39)

184.2 (7.25)1.4 (.06)

17.5 (.69)

76.2(3.00)

19(.75)

54.5(2.14)

Optional slot(emergency egress handle)

4 x Ø 6(.236)

71 (2.8)

35.5 (1.4)

68.5(2.70)

110.4 (4.37)

102 (4.02)

29(1.14)

10(.39)

16 (.63) 20.5(.81)

2(.08)

39(1.52)

25 (1.0) Slide

channel

12.5 (.5)

30 (1.18)

30 (1.18)

85 (3.35)

100 (3.94)

100 (3.94) Ref

Door back Channel formulti-point rods34 (1.34)

Frame

Door front

6 (.25)

32 (1.26) to50 (2.00)

Bracket Part Number

No. 8 Self Tapping Screw (Part Number By Length)

R3-23-250-01 R3-23-250-02 R3-23-250-03 R3-23-250-04 R3-23-250-05

16 (.625) Long 19 (.750) Long 25.4 (1.00) Long 32 (1.250) Long 38 (1.500) Long

Standard Bracket R3-23-160-11-01 32 (1.250) 32 (1.250) - 38 (1.500) 38 (1.500) - 44 (1.750) 44 (1.750) - 50 (2.00) –

Extended Bracket R3-23-162-11-01 22 (.875) - 25 (1.00) 25 (1.000) - 32 (1.250) 32 (1.250) - 38 (1.500) 38 (1.500) - 44 (1.750) 44 (1.750) - 50 (2.00)

U-Bracket R3-23-161-11 1.5 (.0620 - 4.8 (.187) 4.8 (.187) - 9.5 (.375) – – –

Door thickness

Extended Bracket

U-Bracket (slot for emergency egress handle included)

Standard Bracket

NotesU-bracket is intended for sheet metal door applications

Part NumberOrder latch, bracket and mounting screws separately.

For latch see page 238

For bracket and mounting screws see table

AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01

Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05

Overmolded key, keyed alike R001 (2 keys per ring) Part number: PK-10-01-05-KR001

Emergency egress handle (optional): Part number: R3-21-110

Page 3: R3 Push-to-Close Latch · 2018-02-28 · R3-23-250-01 R3-23-250-02 R3-23-250-03 R3-23-250-04 R3-23-250-05 16 (.625) Long 19 (.750) Long 25.4 (1.00) Long 32 (1.250) Long 38 (1.500)

240

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

Finish Latch Part Number

Chrome, polished R3-10-311-10

Black powder coated R3-10-311-50

White Powder coated R3-10-311-70

www.southco.com/R3

CL

DoorFrame

92±1(3.62±.04)

68 (2.68 )

32.5±1(1.28±.04)

58*±1(2.28±.04)

8 (.31 )+0-2

+.00-.08

42.1(1.66)

Striker holes84.2 (3.31)

Frame mortise14 (.55) deep

Door mortise58 (2.3) thru

32 - 38 (1.25 -1.50)

22 (.87)

50(2.0)

+2-0

+.08-0

10 (.39)

37* (1.46)

18*(.7)

10(.39)

Door clearance 6 (.24)

Hingeside

22(.87)

22(.87)

A

B

R 4 (.16)Maximum

84.2 (3.31)

2 x Clearance holes for screws (not supplied) 45 (1.77)

2 x Clearance holes for 8-32 flat-head screws (supplied)

Mounting Plate Striker Plate

32 - 38(1.25 - 1.50)

110(4.33)

94 (3.7)

Fronthousing

Backhousing

121(4.76)

45 (1.77)

2 x8-32

Mounting plate holes

Deadbolt actuator

Gasket

114(4.49)

65 (2.55)

90(3.54)

16(.63)

14.5(.57)

Part NumberSee table

R3 Push-to-Close LatchPull-to-open · Paddle handle · Entry door latch

*For left hand mounting mirror the dimensions marked with * by moving them to the other side of the centerline.

• Environmentally sealed• Dual sided access and

locking

Material and FinishLatch assembly: Zinc alloy, black powder coated or white or chrome plated

Slide bolt: Zinc alloy, zinc plated

Striker mounting plates and brackets: Steel, zinc plated

Performance DetailsMaximum working load: 560 N (125 lbf)

Operating temperature range: -18ºC (0ºF) to 60ºC (140ºF)

Installation NotesMaximum tightening torque on mounting screws: 2 Nm (14 inlbf)

AccessoriesOvermolded key, keyed alike CF305 (2 keys per ring) Part number: PK-10-01-09-CF305

Replacement screws Part number: R3-13-310

NotesMounting plate, striker plate and all mounting screws except striker plate screws are provided with each lock set.

Part Number

Mounting plate R3-13-190

Striker plate R3-13-180Other options available. For complete details on variety, part numbers, installation and specification, go to

Page 4: R3 Push-to-Close Latch · 2018-02-28 · R3-23-250-01 R3-23-250-02 R3-23-250-03 R3-23-250-04 R3-23-250-05 16 (.625) Long 19 (.750) Long 25.4 (1.00) Long 32 (1.250) Long 38 (1.500)

263C

Dimensions in millimeters (inch) unless otherwise stated

• Single or multi-point actuation capability• Compatible with a wide range of rotary latches• Environmentally sealed

Material and FinishLatch assembly: Zinc alloy, black or white powder coated or chrome plated. Mounting bracket: Steel, zinc plated

Installation NotesMaximum tightening torque on mounting screws: 2 N•m (14 in•lbf)

NotesFor lock core selection and a complete overview of the SOUTHCO®

Key-Choice System see page 158

Can be configured with 1 or 2 cables. Recommended cable type 7. Cable mounting brackets sold separately. (See page 275).

Part NumberOrder latch, bracket and mounting screws separately

For latch see table

For mounting bracket, order part number R3-23-161-11

See table for mounting screws

www.southco.com/AC

R3-22 Multi Point ActuatorPull-to-open Paddle

Other options available. For complete details on variety, part numbers, installation and specification, go to

Screws for Mounting Bracket Part Number R3-23-161-11

Front Door Thickness No. 8 Self Tapping Screw (order 4 per latch)

1.5 (.062) - 4.8 (.187) R3-23-250-01

4.8 (.187) - 9.5 (.375) R3-23-250-02

Panel Preparation

Mounting bracket

(sold separately)

100 (3.94)

118 (4.65)

100 (3.94)

85(3.35)

9(.35)

118(4.65)

2X 16.5 (.65)

1.5-9.5(.0625-.375)

118 (4.65)

32-50(1.26-2.00)

Backside panel of door

Frontside panel of door

Backside panel

Backside panel

116(4.57)

18.2(.72)

128.7 (5.07)

22-50 (.875-2.00)

32-50 (1.25-2.00)

Frontflange

Front flange

Multi-pointcables (not supplied)

68.5(2.7)

110(4.3)

71(2.8)

102(4)

Mounting bracket

R3-23-161-11

(sold separately)

Cable retaining

clips included

Mounting screws (4x) see table below

(sold separately)

R3 - 22 - 3 L 0 - F 0

F Finish1 Polished chrome 5 Black powder coated 7 White powder coated

L Locking Options0 Non-locking 1 Reversible Key (No keys - R001) 2 Reversible Key (2 keys included - R001)4 Standard Key (No keys - CH751)5 Standard Key (2 Keys included - CH751)9 No lock plug installed (see notes for more information)