R20 CAR DVRCapture your journey

USER GUIDE

Languages English 4

4

Eng

lish

Community

Tech support: e: helpdesk@kaiserbaas.com w: www.kaiserbaas.com/support p: Australia 1300 302 306 p: New Zealand 0800 302 306 (business hours, AEST)

/kaiserbaasRegister this product for 12 month warranty:

www.kaiserbaas.com/register

Get product updates: www.kaiserbaas.com/updates

5

Eng

lishContents

Safety Precautions 6

What’s in the Box 7

Product Diagram 8

Setting up the R20 Car DVR 9

In Car Operation 10

Computer Connection 11

Interface 12

Settings 16

Software 18

Specifications 23

Frequently Asked Questions 24

Contact Us 25

6

Eng

lish

Safety PrecautionsBefore using your R20 Car DVR, please ensure you have read and understand all of the safety precautions below.

• Only use the provided power cables to charge the device.

• Do not expose the R20 camera to water, dust, oil and temperatures over 70˚c.

• Avoid leaving your R20 camera in direct sunlight for prolonged periods of time.

• Please do not attempt to adjust the camera settings while you are operating your vehicle.

PLEASE USE YOUR CAMERA WITHIN YOUR COUNTRIES ROAD LAWS. PLEASE CHECK YOUR LOCAL ROAD LEGISLATION BEFORE USE.

7

Eng

lishWhat’s in the Box

Please ensure the product package has all the following contents:

B

A

B

C

E

F

G

D

D

E

FG

C

R20 Car DVR

Mount

Micro USB Cable

User Guide

USB Car Charger

6 x Cable Management Clips

USB DC power cable

A

8

Eng

lish

Product Diagram1 Wide Angle Lens

2 Mounting Socket

3 DC Power Port

4 HDMI Mini Port 5 Micro USB Port

6 Up/Playback Button

7 Down/Photo Shutter Button 8 2.7” Display

9 Power/Back/Settings Button 10 OK/Event Recording Button 11 Reset Button 12 Micro SD Slot

8

1

2

11 1210

9

7

6

5

4

3

Front Side

Back

Bottom

9

Eng

lish

Side

Bottom

Setting up the R20 Car DVR

• Insert Micro SD card in the Micro SD card slot on the bottom of the camera.

• Camera will power up and start recording as soon as it receives power from the DC power connection (eg. when you start your car).

• Clean the area on your windscreen making sure desired placement is not blocking the drivers view.

• Attach the camera to the mount by sliding the camera connection from right to left along the mount connection until latched.

• Remove the protective skin from the 3M adhesive on the mount.

• Stick the adhesive to the inside of the front windscreen in the desired position, and press for 30 seconds to ensure that the camera is secure.

• Adjust the nut to ensure that the camera is correctly angled.

• Finally connect the R20 to power using the DC power cable and the USB car charge adaptor.

General:

Car set up:

10

Eng

lish

In Car Operation

• Once camera is set up and connected to DC power, the camera will automatically power on and start recording when the car is started.

• The car camera requires a class 6 or above Micro SD card (not included) with at lease 8GB of free space.

• The internal G sensor will register any bumps that could be accidents and registers them as an “Event”. These event files will not be recorded over by regular footage, these files need to be manually deleted from your SD card using the provided management software.

• Event recording can be manually triggered using the “OK” button during recording.

• Still photos can be taken using the Down button during recording.

• LDWS (Lane Departure Warning System) will warn the driver if they are not correctly in their lane. This feature can be adjusted through the Camera setting.

Note: For more information on the R20 interface please see section marked “Interface”.

11

Eng

lish

Computer Connection

• Download and install the supplied Motor+ software to your PC or Mac. The software can be found at: www.kaiserbaas.com/software/r30

• Follow the on screen set up guide.

• Connect your R20 camera to your computer using the supplied micro USB cable.

• Open the Motor+ software.

• Select if you want to review media on the camera (left icon), or your computer (right icon)

Note: For more information on software functions please see sec-tion marked “Software”.

12

Eng

lish

Interface Recording ScreenThis is the device’s main recording screen; this will show while your R20 is powered on and not in screensaver mode. The four on screen icons are selected by using their adjacent buttons.

!

Recording Screen Screen

1 Library/Playback

2 Photo Shutter Button

3 Settings

4 Event Record

5 Mode

6 Resolution

7 Microphone/Mute

8 GPS Signal

9 Photo Capacity

10 Event Capacity

11 Time

12 Power

1

2

3

4

5 6 7 8 9 10 11 12

13

Eng

lish

Library This menu is found by pushing the up button while at the recording screen. From here you can review your media, select either Event Recording, Loop Recording, or Photos by using the Up and Down buttons and the OK button to select.

Library Screen

1 Event recording

2 Normal Recording

3 Photos

1

2

3

14

Eng

lish

MediaOnce you have selected your media from the library screen, this screen gives the option of skipping to the next or previous file, or playing the currently selected file.

Media Screen

1 Previous

2 Next

3 Back

4 Play

1

2

3

4

15

Eng

lish

PlayerThis is the player screen, which is controlled by using the buttons on the side of the screen.

Player Screen

1 Rewind

2 Fast Forward

3 Stop

4 Pause

1

2

3

4

16

Eng

lish

Settings Camera

Video Resolution

Set the video resolution of Normal Looping Video and Event Protection Video

• 1296p: 2304x1296 P30

• 1080p: 1920x1080 P30

• 720P: 1280x720 P30

LDWS Turn on/off the LDWS function

• On

• Off

LDWS Calibration

Adjust the lane sensing upper line & bottom line

-

Recording Duration

Set the duration of each Normal Looping Video

• 3 min

• 5 min

• 10 min (Disabled in 1296p)

Driving

Screen Saver Duration

Set the amount of time you would like the screen saver to activate or turn off the screen saver function

• 30 sec

• 1 min

• 3 min

• Off

Screen Saver Type

Set the Screen saver type

• Display off

• Time

• Direction

17

Eng

lish

Microphone Turn on/off the microphone during recording

• On

• Off

Volume Adjust the Speaker volume of Voice/Sound/Playback

• 0-5

Sensitivity Set the sensitivity of the G-sensor to activate the Event Protection Recording or turn off this function

• High

• Mid

• Low

• Off

Voice Guide Turn on/off the voice prompt function

• On

• Off

General

Language Set the device language

• English

• German

• Spanish

• French

• Italian

• Russian

• Japanese

• Korean

• S. Chinese

• T. Chinese

Date/Time Set

Set the date and time of the device

YYYY/MM/DD/HH/MM

18

Eng

lish

Software Opening Screen

Opening Screen Screen

1 Camera media 2 Media Stored on Computer

1 2

19

Eng

lish

Media Manager

Media Manager Screen

1 Photo

2 Video

3 Event Video

4 Media Stored on Computer

5 Media

6 Camera Settings

7 General Settings

32 4

5

1 76

20

Eng

lish

Media Player

Media Player Screen

1 Speed

2 Compass

3 Player Controls

4 GPS position

5 Share to Social Media

6 Copy Video from Camera

4

5

6

1

2

3

21

Eng

lish

General Settings

General Settings Screen

1 Language Selection 2 Directory to Save Videos to Computer

1

2

22

Eng

lish

Camera Settings

Camera Settings Screen

1 Mute/Volume

2 Event Recording Sensitivity

3 Video Resolution Settings

4 Voice Guidance Settings

5 Video Duration Settings

1

2

3

4

5

23

Eng

lish

SpecificationsSensor 3MP CMOS

Lens 135° Wide Angle Lens

Still Image Resolution on Recording

3MP on 1296p/2MP on 1080p/1MP on 720p

Video Resolution 1296P: 2304x1296 P30/1080P: 1920x1080 P30/720P: 1280x720 P30

Video Format MPEG4 (H.264) .MOV File

Photo Format JPG

Display Panel 2.7” Color Display 16:9

Indicator LED 1 pc, 3 colors

GPS Sensor Yes

G Sensor Yes

TV Out Mini HDMI

USB Port Micro USB

Power DC in

Microphone Yes

Speaker Yes

Voice Language English, Mandarin

Operation Temperature -20 to 70 degree

Storage Temperature -40 to 80 degree

Dimension (L x W x H) 92 x 51 x 29.3mm

Weight 104g

24

Eng

lish

Frequently Asked Questions

Q. The image is blurry A. Try repositioning the camera. For best results, try to aim the camera through a section of the windshield that is not overly curved or angled as this can cause a blurring effect with footage.

Q. I can’t find the App in the App store A. Go to www.kaiserbaas.com/R20 using your mobile phone for a direct link to the app store in your country.

Q. My device will not record A. Please ensure that you have power connected to the camera using the supplied DC power cable and that you have a SD card inserted that is Cat 6 or above.

Q. My HDMI cable will not fit in the HDMI socket on the camera A. The socket on the side of the camera is a mini HDMI port and requires a mini HDMI adaptor (not included).

25

Eng

lish

Contact Us

Having trouble setting your R20 Car DVR up?

Please contact us. No question too big or small and we are more than happy to help.

Please visit: www.kaiserbaas.com/support

Or email: helpdesk@kaiserbaas.com

For further information please visit:

www.kaiserbaas.com

Tech support: e: helpdesk@kaiserbaas.com w: www.kaiserbaas.com/support p: Australia 1300 302 306 p: New Zealand 0800 302 306 (business hours, AEST)