ROBEX 140W-7

Standard EquipmentISO standard cab. All-weather steel cab with all-around visibility. Safety glass windows. Rise-up type windshield wiper. Sliding fold-in front window. Sliding side window. Lockable door. Hot & cool box. Accessory box & Ash-tray

Computer Aided Power Optimization(New CAPO) system. 2-power mode, 3-work mode, 2-user mode. Auto deceleration & one touch deceleration system. Auto warm up system. Auto overheat prevention system

Heater(7500 kcal/hr, 30000BTU/hr) & DefrosterSelf diagnostic systemCentralized monitoring. LCD display

Engine speedClock & Error code. GaugesFuel level gaugeEngine coolant temperature gaugeHyd. oil temperature gauge.WarningFuel levelCheck Engine & CPUEngine oil pressureEngine coolant temperatureHyd. oil temperature Low batteryAir cleaner clogging. IndicatorPower max.Preheat & Engine warming-upOne touch decel

Door and cab locks, one keyTwo outside rearview mirrorsFully adjustable suspension seat with seat beltSlidable joystick, pilot-operatedAutomatic swing brakeFuel prefilter, fuel lineWater separator, fuel lineBoom holding systemArm holding systemCounterweight (1900kg, 4190lb)Mono boom (4.6m, 15’ 1”)Arm (2.1m, 6’ 11”)Am/Fm radio and cassette. Radio remote switchConsole box tilting system (LH.)Two front working lightElectric hornBatteries (2 x 12V x 100AH)Battery master switchStarting Aid(air grid heater) cold weatherStandard bucket(0.58 m3, 0.76 yd3)Rear - blade (550 x 2500)Tires - dual (9.00 - 20 - 14PR)Travel alarmFuel warmer

Optional EquipmentAir-conditioner (5000kcal/hr, 20000BTU/hr)Sun visor for cabin insideFuel filler pump (35 /min, 9.5 USgpm) Beacon lampSafety lock valve for boom cylinder with

overload warning deviceSafety lock valve for arm cylinderSingle acting piping kit (breaker, etc)Double acting piping kit (cramshell, etc)Accumulator, work equipment lowering12 volt power supply (DC-DC converter)Electric. transducer

Various optional booms. Short boom (4.1m, 13’ 5”). Hyd, adjustable boom (4.9m, 16’ 1”)

Various optional Arms. Short arm (1.90m, 6’ 3”). Semi long arm (2.50m, 8’ 2”). Long arm (3.00m, 9’ 10”)

Various optional Buckets (SAE heaped). Standard bucket (0.58m3, 0.76yd3). Narrow bucket (0.23m3, 0.30yd3). Narrow bucket (0.40m3, 0.52yd3). Narrow bucket (0.46m3, 0.60yd3). Narrow bucket (0.52m3, 0.68yd3). Light duty bucket (0.65m3, 0.85yd3). Light duty bucket (0.71m3, 0.93yd3). Slope finishing bucket(0.45m3, 0.59yd3). Ditching bucket(0.55m3, 0.72yd3)

Cabin LampCabin FOPS/FOG(ISO 10262)Cabin roof-cover transparentLower frame under coverPre heating systemTool kitOperator suitSpecial cowling. Air vent type side door

Hydraulic adjustable boom(4.9 m, 16’ 1”)Undercarriage. Rear outrigger. Rear dozer and front outrigger. Rear and front outrigger. Rear outrigger and front dozer

Manual throttle cable for emergencyTiers - dual (9.00 - 20 solid)Seat

Adjustable air suspension seatMechanical Suspension seat with heaterAdjustable air suspension seat with heater

*Photo may include optional equipment.

WHEELED EXCAVATOR Applied Tier 2 Engine

140W-7

PLEASE CONTACT

www.hyundai-ce.com 2009. 9 Rev.7

Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.All imperial measurements rounded off to the nearest pound or inch.

HYUNDAI 7 Series Wheeled ExcavatorHYUNDAI 7 Series Wheeled ExcavatorThe ROBEX 140W-7 provides outstanding performance, working

harder and faster in a variety of job conditions.Hyundai’s ROBEX 7 series features a comfortable operating

environment with advanced ergonomics.

Wide Cab with Excellent Visibility The cab is roomy and ergonomically designed with low noise level and good visibility. A full view front window and large rear and side windows provide excellent visibility in all directions.

Highly Sensitive Joystick and Easy Entrance New joystick grips for precise control have been equiped with double switches.

Dial Type Engine Speed Switch and Key Switch Front Switch Panel

Hazard Parking Brake Ram lockSteel Cover Sunroof Rise-up Wiper and Cabin Lights

Raise-up wiper has been designed enhanced for the better front view. Cabin Lights enhance safety by brightly lighting the surroundings during night work(optional)

Conveniently Designed Acceleration and Brake Pedal

AA

B

C

D

E

F

G

B C

E F G

D

2 3

*Photo may include optional equipment.

Excellent VentilationVentilation has been improved with the addition of the larger fresh air intake system, and with providing additional air flow throughout the cab.Sliding front and side windows provide improved ventilation.A large sunroof offers upward visibility and additional ventilation.

VisibilityEven more visibility than before, for safer, more efficient operating.

Comfortable Operating EnvironmentThe control levers and seat can be adjusted to provide maximum operator comfort. The seat is fully adjustable for optimum operating position, reducingoperator fatigue. Console boxes slide forward and backward for improved accessibility. The proportional pressure controls reduce unnecessary exertionwhile ensuring precise operation.

Large windows allow excellent visibility in all directions.

Low noise designThe Robex 7 series was designed with low operation noise.Hyundai engineering helps keep interior and exterior noise levels to aminimum. The cab's noise levels have been additionally reduced by improvingthe door seals for the cab and engine compartments. An insulated diesel engine compartment with sound-damping materialalso reduces noise.

Easy-to-Reach Control PanelsSwitches and other essential controlsare located near the operator. Thishelps keep operator movement to aminimum, enhancing control with lessoperator fatigue.

Power boostOne touch decelerationHornOptional

Left

Right

Rear Emergency Exit WindowRear exit window is designed witheasy exit for operator's safety.

Improved Intelligent DisplayInstrument panel is installed in frontof RH console box. It is easy to check all critical systemswith easy-to-read indicators.

Deluxe Cassette andRemote Radio Control

Operating Environment

3

Switch panel(R.H)Horn buttonOption button(breaker operation)Remote radio controlClusterHour meterAccel. pedalBrake pedalMulti function switch(R.H)SteeringSwitch panel(Front)Multi function switch(L.H)Safety leverJoystick control leverPower Max. buttonOne touch decel. buttonDozer blade LeverAir conditioner and heater controllerFully adjustable suspension seat

Wide, Comfortable Operating SpaceAll the controls are designed and positioned according to the latestergonomic research. Reinforced pillars have also been added forgreater cab rigidity.

The best working conditions in a pleasant environment.

Operator’s Comfort is Foremost. Wide Cab Exceeds Industry Standards.

Technology in Cab DesignTechnology in Cab Design

Adjustable Steering Column

60mm

30

Storage box and Cup HolderAn additional storage box and a cupholder are located behind operator’sseat, and they keep food andbeverages cool or hot.

4 5

*Photo may include optional equipment.

Self-Diagnosis SystemThe CPU controller diagnoses problems in theCAPO system caused by electric and hydraulicmalfunctions and displays them on the LCDmonitor of the cluster through error codes. Thiscontroller has the capacity to identify 48 distincttypes of errors. As the information from thisdevice, such as engine rpm, main pump deliverypressure, battery voltage, hyd. temperature,and the state of all types of electric switchesprovides the operator with a much more exactstate of machine operating condition. This makes the machine easier to troubleshootwhen anything does go wrong.

Arm Flow Regeneration SystemArm flow regeneration valve provides smootharm-in operation without cavitation.

Boom & Arm Holding System The Holding valves in the main control valveprevents the boom & arm from dropping over anextended period in neutral position.

One Touch Decel SystemWhen the one touch decel switch is pressed,CPU controller controls the accel actuator toreduce engine speed to low idle. And then theone touch decel switch is pressed again, theengine speed recovers.

Auto Deceleration SystemWhen remote-control valvesare in neutralposition morethan 4 seconds,CPU controllerinstructs the

accel. actuator to reduce engine speed to1200rpm. This decreases fuel consumption andreduces cab noise levels.

Max. Flow Cut-off SystemFor precise control and finishing work, the Max.Flow Cut-off System reduces pump flow, thusallowing smooth operation.

Pump Flow Control SystemIn neutral position: Pump flow is reduced to aminimum to eliminate power loss. In operation: Maximum pump flow is delivered tothe actuator to increase the speed. Withmovement of the control lever, pump flow isautomatically adjusted and the actuator speedcan be proportionally controlled.

Hydraulic Damper in Travel PedalImproved travel controllability & feeling byshock reducing when starting and stopping.

Advanced CAPO SystemThe advanced CAPO(Computer Aided Power Optimization) system maintains engine and mutual pumppower at optimum levels. Mode selections are designed for various work loads and maintaining highperformance while reducing fuel consumption. Features such as auto deceleration and power boost are included in the system. The system monitorsengine speed, coolant temperature, and hydraulic oil temperature. Contained within the system are selfdiagnostic capabilities which are displayed by error codes on the cluster.

Automatic Engine Overheat PreventionIf the engine coolanttemperature gets toohigh, the CPU controllerlowers the enginespeed and cools the

engine.

Anti Restart SystemThe new systemprotects the starter fromre-starting during engineoperation, even if theoperator accidentally

turns the start key again.

Power boost controlSystemWhen the power boostsystem is activated,digging powerincreases about 10%.

It is especially useful when extra power istemporarily needed, for instance, when digginghard earth and rock, or if the bucket teeth arestopped by a stubborn tree root.

Automatic Warming-up SystemAfter the engine isstarted, if the enginecoolant temperature islow, the CPU controller

increases the engine speed and automaticallyincreases the pump flow rate to warm up theengine more effectively.

Drive signal

Main control valve

Power boostsolenoid valve

Travel reversesolenoid valve

ProlixResistor

Drive signal

Pressure switch signal

P M

Serial Communication(-)Serial Communication(+)

Coolant temperature signal

Mot

or d

rive

sign

al

Pot

entio

met

er s

igna

l

Eng

ine

spee

d se

nsor

sig

nal

Auto deceleration pressure switch

Hyd temperature signal

Travel motor

Max flow COsolenoid valve

Drive signal

Accel dial signal

Travel speed signal

signalsignal

CPU controller

P1 P2

Cluster

Transmission

Travel forwardsolenoid valve

Battery

Accel dial

LH controllever

RH controllever

Power boostbutton

Optionbutton

One touchdecel buttonHorn

Accelactuator

Engine

Coolanttemp sensor

Engine speedsensor

Main pump Pilot pump

Hyd tempsensor

EPPR valve

Max flowCO valve

Normal Emergency

CN-19A

CN-19

CN-19B

Fuel injectionpump

Travel lever

Main reliefvalve

Extra B

Arm 1

Boom 2

Swing

Bucket

Arm 2

Extra A &Arm regen

Boom 1

Dozer

Extra C

Travel

Arm regen COsolenoid valve

Drive signal

Hi

LowMultifunction

switch(RH)

ADVANCED CAPO SYSTEM NEW MODE CONTROL SYSTEM

Advanced Hydraulic SystemAdvanced Hydraulic System POWER MODEH mode : High powerS mode: Standard power

USER MODEM mode: Maximum PowerU mode: Memorizing Operator’s Preferable

Power Setting

WORK MODEHeavy duty

General

Breaker

6 7*Photo may include optional equipment.

AxleBecause axle housing acts as a brake oil tank, protection against heatis improved. In case of brake disc is worn away, Interval of disk iscontrolled automatically. Enlarged bolt size of wheel rim increasesdurability and stability.

Powerful and PreciserSwing ControlImproved shock absorbingcharacteristics make stopping aprecise and smooth action

Powerful Dozer Blade andDozer Blade Cylinder GuardLarge size blade’s plate and coverthat protect cylinder improvedefficiency of work and durability ofequipment.

Increased Higher Performance and durability

Increased Higher Performance and durability

CUMMINS B3.9-C ENGINEThe four cylinders, turbo-charged, 4 cycle,charger air cooled engine is built for power,reliability, economy and low emissions.

A More Reliable Way To ReachYour Dream.The Cummins B3.9-C engine has been designedwith 40% fewer parts than the competitors. Thatmeans there's less that can go wrong when youneed it most. It also means fewer parts toinventory. Repairs are simplified because nospecial tools are needed for maintenance. Theweight of the machine is reduced withoutsacrificing strength.The B3.9-C engine is capable of reachingemission standards without electronic enginecontrols. You get a proven power plant thatmeets ecological concerns, without paying apremium for technology you don’t need.

Reinforced Bucket and BucketLinkageSealed and adjustable bucket linkage providesless wear of pins and bushes as well as silentoperation.The design includes bucket linkdurability and anti-wearcharacteristics. Additional reinforcementplates on cutting edgesection. Reinforced bucketis made with thicker steeland additional lateralplate.

Strong and Stable Lower FrameReinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground andworking on wet sites through high tensile strength steel panels, with protection cover fortransmission.

Minimization of Shock andVibration through Cab MountingSystem

The application ofViscous Mountingto the cabinsupport providesthe operator witha much improved

ride. The working efficiency of operators willincrease as the shock and noise level in thecabin decreases.

8 9*Photo may include optional equipment.

Reliability and Serviceability

Reliability and Serviceability

Easy to Maintain Engine ComponentsThe cooling and preheating system are provided for optimum and immediate operation,guaranteeing longer life for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility.

Side Cover with Left & Right Swing Open TypeEasy access to vital components gives unrestricted view ofcomponent and allows easy maintenance and repair.

Easy to Access Battery and Master SwitchBattery and master switch on equipment forehead enable to checkand maintain easily.

Centralized Electric Control Box andEasy Change Air Cleaner AssemblyElectric control box and Air cleaner are centralized in one or the same compartmentfor easy service.

Highly Efficient Hydraulic PumpPump output and Hydraulic tank capacityhave been increased.A pilot pump has been installed resulting inimproved control sensitivity.

Large Capacity Fuel and Hydraulic TanksThe capacity of fuel and hydraulic tank isincreased to extend the working time.

Durability of structure is proven throughFEM(Finite Element Method) analysis and long term durability test.

10 11*Photo may include optional equipment.

NEW 7 SERIES ROBEX 140W-7

Specifications Backhoe attachment 12 / 13

Engine

Water cooled, 4 cycle diesel, 4-cylinders inline direct injection, turbocharged, chargeair cooled low emission

4-wheel hydrostatic drive. Constant mesh, helical gear transmissionprovides 2 forward and reverse travel speeds.

113 HP (84 kW) at 2100 rpm105 HP (78 kW) at 2100 rpm115 PS (84 kW) at 2100 rpm106 PS (78 kW) at 2100 rpm45.6 kgf . m(330 lbf . ft) at 1500 rpm102 x 120 mm (4.02” x 4.72”)3,900 cc (238 cu in)2 x 12 V x 100 AH24 V- 4.5kW24V-50 Amp

Type

Ratedflywheelhorsepower

Max. torqueBore x strokePistonBatteriesStarting motorAlternator

J1995 (gross)J1349 (net)6271/1 (gross)6271/1 (net)

SAE

DIN

Buckets

Arms

Model Cummins B3.9-C

Swing system

Swing motorSwing reductionSwing bearing lubricationSwing brake(option)Swing speed

Axial piston motorPlanetary gear reductionGrease-bathedmulti wet disc(pin lock type)14.5 rpm

Coolant & Lubricant capacity

Steering system

(refilling)Fuel tankEngine coolant Engine oilSwing device-gear oil

(front)(rear)

Hydraulic system(including tank)Hydraulic tank

Axle

liter270.024.015.32.510.210.8

210.0124.0

US gal71.36.34.00.72.72.955.532.8

UK gal59.45.33.40.552.22.446.227.3

Dozer blade A very useful addition for leveling and back filling orclean-up work.

Indicated for max. operation stabillity when digging andlifting. Can be mounted on the front/or the rear.Outrigger

Undercarriage

Drives & Brakes

Max. drawbar pull1st (foward) / (reverse)2nd(foward) / (reverse)

GradeabilityParking brake : Independent dual brake, front and rear axle full hydraulic power brake.

Spring released and hydraulic applied wet type multiple disk brake.Transmission is locked at neutral position for parking, automatically.

Travel speed

Pilot pressure operated joysticks and pedals with detachable leverprovide almost effortless and fatigueless operation.

Operating weight (approximate)

Major component weight4,675kg (10,310 lb)1,900kg (4,190 lb)1,030kg (2,270 lb)

UpperstructureCounterweightMono boom(with arm cylinder)Hydraulic adjustable boom(with adjust cylinder and arm cylinder) 1,430kg (3,150 lb)

Operating weight, including 4600mm (15’ 1”) One-piece boom, 2100mm (6’ 11”) arm, SAE heaped 0.58 m3 (0.76 yd3) backhoe bucket,lubricant, coolant, full fuel tank, hydraulic tank and the standardequipment.

13,500(29,760)13,900(30,640)14,500(31,970)14,500(31.970)14,900(32,850)

13,900(30,640)14,300(3,1530)14,900(32,850)14,900(32,850)15,300(33,730)

Hydraulic system

Two variable displacement piston pumps2 x 130 /min (34.3 US gpm / 28.6 UK gpm)Gear pump

Two speed axial piston motorwith brake valve

Axial piston motor with automatic brake

330 kgf/cm2 (4690 psi)330 kgf/cm2 (4690 psi)360 kgf/cm2 (5120 psi)240 kgf/cm2 (3410 psi)40 kgf/cm2 (570 psi)

Installed

Boom : 2-105 1075 mmArm : 1-115 1188 mmBucket : 1-100 855 mmBlade : 2-100 236 mmOutrigger : 2-110 475 mm2-PCS boom : 2-105 975mmAdjust(boom) : 1-145 613mm

(4.1” 42.3”)(4.5” 46.8”)(3.9” 33.7”)(3.9” 9.3”)(4.9” 18.7”)(4.1” 38.4”)(5.7” 24.1”)

TypeRated flowSub-pump for pilot circuitCross-sensing and fuel saving pump system

Travel

Swing

Implement circuitsTravelPower boost (boom, arm, bucket)Swing circuitPilot circuitService valve

No. of cylinder-bore x stroke

Main pump

Hydraulic motors

Relief valve setting

Hydraulic cylinders

8500 kgf (18740 lbf)8.0(5.0) km/hr30.0(18.7) km/hr35 (70 %)

Engine throttle

External Lights

Pilot control Two joysticks with one safety lever(LH): Swing and arm, (RH): Boom and bucket(ISO)

Two lights mounted on the boom, one under the battery box and one under the cabin.

Electric, Dial type

Control

0.23 (0.30) 0.40 (0.52)0.46 (0.60) 0.58 (0.76)

0.52 (0.68) 0.65 (0.85) 0.71 (0.93) 0.45 (0.59) 0.55(0.72)SAE heaped m3 (yd3)

SAE heaped 1.9(6’ 3”)Arm

Weight kg(lb)Width mm (in)

Boom

CECE heaped Without side cutters With side cutters

Capacity m3 (yd3)Recommendation m(ft.in)

: Standard backhoe bucket: Ditching bucket: Slope finishing bucket

: Applicable for materials with density of 2,000 kg / m3 (3,370 lb/ yd3) or less: Applicable for materials with density of 1,600 kg / m3 (2,700 lb/ yd3) or less: Applicable for materials with density of 1,100 kg / m3 (1,850 lb/ yd3) or less

4.6 (15’ 1”) 4.9 (16’ 1”) Adjustable boom

0.23 (0.30)0.40 (0.52)0.46 (0.60)0.52 (0.68)

0.58 (0.76)0.65 (0.85)0.71 (0.93)

0.45 (0.59)0.55 (0.72)

0.20(0.26)0.35(0.46)0.40(0.52)0.45(0.59)0.50(0.65)0.55(0.72)0.60(0.78)0.40(0.52)0.45(0.59)

520(20.5)760(29.9)850(33.5)935(36.8)1030(40.6)1110(43.7)1205(47.4)1520(59.8)1800(70.9)

620(24.4)860(33.9)950(37.4)1035(40.8)1130(44.5)1210(47.6)

---

335(740)410(900)435(960)460(1010)480(1060)500(1100)540(1190)410(900)585(1290)

2.1(6’ 11”)

2.5(8’ 2”)

3.0(9’ 10”)

1.9(6’ 3”)

2.1(6’ 11”)

2.5(8’ 2”)

Boom and arms are of all-welded, low-stress, full-box section design. 4.6m(15’ 1”) mono boom and 4.9m(16’ 1”) adjustable boom and 1.90m(6’ 3”),2.10m(6’ 11”), 2.50m(8’ 2”), 3.00m(9’ 10”) arms are available. Buckets are all-welded, high-strength steel implements.

2.50 (8’ 2”)

610 (1340)

2.10 (6’ 11”)

580 (1280)

1.90 (6’ 3”)

560 (1230)

Bucket digging force

Arm crowdforce

83.4 [91]8500 [9270]

18740 [20440]

96.1 [104.8]9800 [10690]

21610 [23570]

74.5 [81.3]7600 [8290]

16760 [18280]

78.5 [85.6]8000 [8730]

17640 [19240]

83.4 [91]8500 [9270]

18740 [20440]

96.1 [104.8]9800 [10690]

21610 [23570]

71.6 [78.1]7300 [7960]

16090 [17550]

75.5 [82.4]7700 [8400]

16980 [18520]

3.00 (9’ 10”)

670 (1480)

83.4 [91]8500 [9270]

18740 [20440]

96.1 [104.8]9800 [10690]

21610 [23570]

53.9 [59.0]5500 [6020]

12130 [13270]

56.9 [62.1]5800 [6330]

12790 [13950]

83.4 [91]8500 [9270]

18740 [20440]

96.1 [104.8]9800 [10690]

21610 [23570]

61.8 [67.4]6300 [6870]

13890 [15150]

64.7 [70.6]6600[7200]

14550 [15870]

Note : Arm weight including bucket cylinder and linkage. Standard arm

Arm Length

Weight

m(ft.in)

kg(lb)

kNkgflbf

kNkgflbf

kNkgflbf

kNkgflbf

SAE

ISO

SAE

ISO

Remark

[ ]:Power Boost

2.1m (6’ 11”) 3.00m (9’ 10”)2.5m (8’ 2”)1.9m (6’ 3”)

Digging force

Hyd. adjustable boomMono boomUndercarriage

Standard equipment

Operating weight

Reinforced box-section frame is all-welded, low-stress.Dozer blade and outriggers are available. A pin-on design.

Hydraulically actuated, orbitrol type steering system actuates onfront wheels through the steering cylinders.Min. turning radius 6300 mm(20’ 8”)

Axle & WheelFull floating front axle is supported by center pin for ocillation. It canbe locked by ocillation lock cylinders. Rear axle is fixed on the lowerchassis.Tires 9.00-20-14PR, Dual(tube type)

(optional) 9.00-20, Dual(solid type)

Rear dozer bladeRear outriggerfront outrigger and rear bladefront blade and rear outriggerfour outrigger

140w-7

140w-7

Dimensions & Working ranges

Dimensions R140W-7

A

B

C

D

F

G

Mono Boom

Arm

Overall length of shipping position

Overall length of traveling position

Height of attachment(shipping position)

Height of attachment(traveling position)

Overall witdh

Height of cabin

1900 (6’ 3”)

7740 (25’ 5”)

7730 (25’ 4”)

2760 (9’ 1”)

3500 (11’ 6”)

2500 (8’ 2”)

3140 (10’ 4”)

2100 (6’ 11”)

7800 (25’ 7”)

7740 (25’ 5”)

2870 (9’ 5”)

3500 (11’ 6”)

2500 (8’ 2”)

3140 (10’ 4”)

2500 (8’ 2”)

7750 (25’ 5”)

7670 (25’ 2”)

2820 (9’ 3”)

3620 (11’ 11”)

2500 (8’ 2”)

3140 (10’ 4”)

3000 (9’ 10”)

7760 (25’ 6”)

7680 (25’ 2”)

3340 (10’ 11”)

3600 (11’ 10”)

2500 (8’ 2”)

3140 (10’ 4”)

mm (ft in)

4100 (13’ 5”)

A

A’

B

B’

C

D

E

F

Boom length

4600(15’ 1”)

Arm length1900

(6’ 3”)

4600 (15’ 1”)

7750(25’ 5”)

7530(24’ 8”)

4620(15’ 2”)

4360(14’ 4”)

4100(13’ 5”)

8420(27’ 7”)

5980(19’ 7”)

2620(8’ 7”)

2100(6’ 11”)

7920(26’ 0”)

7700(25’ 3”)

4820(15’ 10”)

4570(15’ 0”)

4230(13’ 11”)

8490(27’ 10”)

6060(19’ 11”)

2680(8’ 10”)

2500(8’ 2”)

8330(27’ 4”)

8120(26’ 8”)

5220(17’ 2”)

5020(16’ 6”)

4770(15’ 8”)

8820(28’ 11”)

6380(20’ 11”)

2630(8’ 8”)

3000(9’ 10”)

8790(28’ 10”)

8590(28’ 2”)

5720(18’ 9”)

5540(18’ 2”)

5300(17’ 5”)

9090(29’ 10”)

6640(21’ 9”)

2670(8’ 9”)

1900(6’ 3”)

7250(23’ 9”)

7010(23’ 0”)

4210(13’ 10”)

3950(13’ 0”)

3730(12’ 3”)

8020(26’ 4”)

5580(18’ 4”)

2350(7’ 9”)

2100(6’ 11”)

7420(24’ 4”)

7190(23’ 7”)

4410(14’ 6”)

4160(13’ 8”)

3870(12’ 8”)

8090(26’ 7”)

5650(18’ 6”)

2470(8’ 1”)

Max. diggingreach

Max. diggingreach on ground

mm (ft in)

Max. diggingdepth

Max. digging depth(8' level)

Max. vertical walldigging depth

Max. diggingheight

Max. dumpingheight

Min. swingradius

Standard Equipment

Standard equipment

140w-7

140w-7

Dimensions R140W-7 Adjustable boom

Working rangesWorking ranges

A

A’

B

B’

C

D

E

F

Boom length

Arm length1900

(6’ 3”)

4900 (16’ 1”)

8130(26’ 8”)

7920(26’ 0”)

4790(15’ 9”)

4670(15’ 4”)

4030(13’ 3”)

9110(29’ 11”)

6630(21’ 9”)

2660(8’ 9”)

2100(6’ 11”)

8310(27’ 3”)

8100(26’ 7”)

4980(16’ 4”)

4870(16’ 0”)

4210(13’ 10”)

9220(30’ 3”)

6740(22’ 1”)

2810(9’ 3”)

2500(8’ 2”)

8720(28’ 7”)

8510(27’ 11”)

5390(17’ 8”)

5280(17’ 4”)

4650(15’ 3”)

9570(31’ 5”)

7080(23’ 3”)

2670(8’ 9”)

Max. diggingreach

Max. diggingreach on ground

mm (ft in)

Max. diggingdepth

Max. digging depth(8' level)

Max. vertical walldigging depth

Max. diggingheight

Max. dumpingheight

Min. swingradius

DIMENSIONS & WORKING RANGES 14 / 15

NEW 7 SERIES ROBEX 140W-7

A

B

C

D

E

F

G

Hydraulic adjustable Boom

Arm

Overall length of shipping position

Overall length of traveling position

Height of attachment(shipping position)

Height of attachment(traveling position)

End of attachment to steering wheel

Overall witdh

Height of cabin

1900(6’ 3”)

8120(26’ 8”)

6030(19’ 9”)

2960(9’ 9”)

3980(13’ 1”)

2960(9’ 9”)

2500 (8’ 2”)

3140(10’ 4”)

2100(6’ 11”)

8150(26’ 9”)

6050(19’ 10”)

3070(10’ 1”)

3980(13’ 1”)

2970(9’ 9”)

2500(8’ 2”)

3140(10’ 4”)

2500(8’ 2”)

8130(26’ 8”)

6080(19’ 11”)

3070(10’ 1”)

3980(13’ 1”)

3000(9’ 10”)

2500(8’ 2”)

3140(10’ 4”)

mm (ft in)

4900(16’ 1”)

140w-7

Undercarriage

Lifting capacities R140W-7 Mono boom

R140W-7 with rear dozer

140w-7

140w-7

140w-7

140w-7

Rating over-side or 360 degreeRating over-front

LIFTING CAPACITIES 17UNDERCARRIAGE 16 Lifting Capacities

NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load

with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

NEW 7 SERIES ROBEX 140W-7

R140W-7 with rear outrigger

R140W-7 with rear dozerand front outrigger

R140W-7 with rear and front outrigger

R140W-7 with rear outriggerand front dozer

*3120*6880*3470*7650*4370*9630*5320

*11730*5850

*12900*5740

*12650

*3120*6880*3470*765033107300307067702930646029106420

*6620*14590*7370

*16250*8890

*19600*8710

*19200*7070

*15590

638014070

573012630

558012300

563012410

581012810

*7740*17060

*7740*17060

*2920*6440*3020*6660*3150*6940*3300*7280*3450*7610*3530*7780

207045601590351014003090136030001470324018204010

6.22(20.4)7.05

(23.1)7.42

(24.3)7.42

(24.3)7.06

(23.2)6.24

(20.5)

*2660*5860*3600*7940*4000*8820*4230*9330

21004630204045001940428018804140

Boom : 4.6 m (15’ 1”) Arm : 1.9 m (6’ 3”) Bucket : 0.58 m3 (0.76 yd3) SAE heaped With rear dozer blade down and 1,900kg Counterweight

Load radiusLoad point

heightm(ft)

3.0 m(10.0 ft)1.5 m(5.0 ft)

6.0 m20.0 ft4.5 m15.0 ft3.0m

10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft

kglbkglbkglbkglbkglbkglbkglb

4.5 m(15.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach

Reach

m(ft)

*2880*6350*3820*8420*4900

*10800*5650

*12460*5820

*12830*5210

*11490

*2880*6350

3380745031106860292064402860631029006390

*5330*11750

*8040*17730

*8820*19440

*9070*20000

*7960*17550

*5330*11750

5910130305580

123005540

122105650

12460

*3740*8250*6380

*14070*9660

*21300

*3740*8250*6380

*14070*9660

*21300

*2600*5730*2700*5950*2820*6220

2910642031006830

*3240*7140*3210*7080

17103770137030201210267011702580125027601490328021704780

6.92(22.7)7.66

(25.1)8.00

(26.2)8.00

(26.2)7.67

(25.2)6.94

(22.8)5.64

(18.5)

*2860*6310*3240*7140*3730*8220*4110*9060*4140*9130

2160476020704560195043001860410018204010

Boom : 4.6 m (15’ 1”) Arm : 2.5 m (8’ 2”) Bucket : 0.58 m3 (0.76 yd3) SAE heaped With rear dozer blade down and 1,900kg Counterweight

Load radiusLoad point

heightm(ft)

3.0 m(10.0 ft)1.5 m(5.0 ft)

6.0 m20.0 ft4.5 m15.0 ft3.0m

10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft

kglbkglbkglbkglbkglbkglbkglb

4.5 m(15.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach

Reach

m(ft)

*2900*6390*3280*7230*4190*9240*5180

*11420*5780

*12740*5780

*12740*4820

*10630

*2900*6390*3280*7230

3330734030706770292064402880635029706550

*6190*13650

*8430*18580

*8950*19730

*8840*19490

*7390*16290

*6190*13650

5770127205560

122605580

123005740

12650

*7320*16140*11630*25640

*7320*16140*11630*25640

*2800*6170*2910*6420*3040*6700

31807010

*3350*7390*3470*7650

196043201530337013402950130028701400309017103770

6.43(21.1)7.23

(23.7)7.59

(24.9)7.59

(24.9)7.24

(23.8)6.45

(21.2)

*3120*6880*3480*7670*3910*8620*4200*9260

21304700205045201940428018604100

Boom : 4.6 m (15’ 1”) Arm : 2.1 m (6’ 11”) Bucket : 0.58 m3 (0.76 yd3) SAE heaped With rear dozer blade down and 1,900kg Counterweight

Load radiusLoad point

heightm(ft)

3.0 m(10.0 ft)1.5 m(5.0 ft)

6.0 m20.0 ft4.5 m15.0 ft3.0m

10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft

kglbkglbkglbkglbkglbkglbkglb

4.5 m(15.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach

Reach

m(ft)

NEW 7 SERIES ROBEX 140W-7

LIFTING CAPACITIES 18 / 19

NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load

with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

Boom : 4.6 m (15’ 1”) Arm : 3.0 m (9’ 10”) Bucket : 0.58 m3 (0.76 yd3) SAE heaped With rear dozer blade down and 1,900kg Counterweight

*3710*8180*5740

*12650*8350

*18410

*3710*8180*5740

*12650*8350

*18410

*7150*15760*8850

*19510*9180

*20240*8490

*18720*6360

*14020

611013470

562012390

549012100

554012210

578012740

*3300*7280*4470*9850*5390

*11880*5790

*12760*5500

*12130

*3300*7280

31606970293064602820622028306240

*2060*4540*2480*5470*2910*6420*3460*7630*3940*8690*4140*9130

*2060*4540

2200485020904610196043201840406017803920

*2340*5160*2450*5400*2570*56702630580027806130

*3020*6660*3110*6860

14803260120026501070236010402290109024001280282017503860

*1740*3840*2150*4740*1790*3950

135029801290284012402730

7.46(24.5)8.14

(26.7)8.46

(27.8)8.46

(27.8)8.15

(26.7)7.48

(24.5)6.31

(20.7)

Load radiusLoad point

heightm(ft)

3.0 m(10.0 ft)1.5 m(5.0 ft)

6.0 m20.0 ft4.5 m15.0 ft3.0m

10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft

kglbkglbkglbkglbkglbkglbkglbkglb

4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

Lifting capacities R140W-7 Adjustable boom

NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load

with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

Rating over-side or 360 degreeRating over-front

Lifting Capacities

CERES SYSTEMCERES(Construction Equipment Resource Support) is HHI’s new information system onall Hyundai Construction equipment’s products for all overseas customer, dealer andbranch office.

http://ceres.hhi.co.kr

*2740*6040*3230*7120*4160*9170*5110

*11270*5650

*12460*5650

*12460*4910

*10820

*2740*6040*3230*71203220710029506500281061902800617029106420

*3970*8750

*6110*13470

*8550*18850

*3970*8750

539011880

546012040

*2640*5820*2730*6020*2850*6280*3000*6610*3160*6970*3270*7210

178039201400309012302710120026501290284015703460

6.69(21.9)7.45

(24.4)7.80

(25.6)7.81

(25.6)7.46

(24.5)6.71

(22.0)

*2970*6550*3330*7340*3760*8290*4070*8970*4010*8840

2090461019904390188041401800397018003970

Boom : 4.9 m (16’ 9”) Arm : 1.9 m (6’ 3”) Bucket : 0.58 m3 (0.76 yd3) SAE heaped With rear dozer blade down and 1,900kg Counterweight

Load radiusLoad point

heightm(ft)

3.0 m(10.0 ft)

6.0 m20.0 ft4.5 m15.0 ft3.0m

10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft

kglbkglbkglbkglbkglbkglbkglb

4.5 m(15.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach

Reach

m(ft)

*2560*5640*3050*6720*3990*8800*4970

*10960*5580

*12300*5660

*12480*5060

*11160

*2560*5640*3050*67203250717029606530280061702770611028606310

*6320*13930

*6250*13780

*8670*19110

621013690

536011820

541011930

*2530*5580*2630*5800*2750*6060*2900*6390*3060*6750*3200*7050

169037301340295011802600114025101220269014703240

6.91(22.7)7.64

(25.1)7.98

(26.2)7.98

(26.2)7.65

(25.1)6.92

(22.7)

*2840*6260*3220*7100*3680*8110*4020*8860*4040*8910

2110465020004410188041401790395017803920

Load radiusLoad point

heightm(ft)

3.0 m(10.0 ft)

6.0 m20.0 ft4.5 m15.0 ft3.0m

10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft

kglbkglbkglbkglbkglbkglbkglb

4.5 m(15.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach

Reach

m(ft)

Boom : 4.9 m (16’ 9”) Arm : 2.1 m (6’ 11”) Bucket : 0.58 m3 (0.76 yd3) SAE heaped With rear dozer blade down and 1,900kg Counterweight

*2440*5380*2570*5670*2990*6590*3500*7720*3910*8620*4050*8930

220048502150474020304480189041701780392017503860

*2680*5910*3640*8020*4700

*10360*5430

*11970*5670

*12500*5300

*11680

*2680*5910

3310730030006610281061902740604027906150

*5450*12020*5940

*13100*6260

*13800*8860

*19530*8020

*17680

*5450*12020

563012410

536011820

536011820

549012100

*2360*5200*2450*5400*2560*5640

268059102830624029806570

148032601190262010602340103022701090240012902840

7.38(24.2)8.07

(26.5)8.39

(27.5)8.39

(27.5)8.08

(26.5)7.40

(24.3)

*1970*4340*2490*5490

1310289012602780

Boom : 4.9 m (16’ 9”) Arm : 2.5 m (8’ 2”) Bucket : 0.58 m3 (0.76 yd3) SAE heaped With rear dozer blade down and 1,900kg Counterweight

Load radiusLoad point

heightm(ft)

3.0 m(10.0 ft)1.5 m(5.0 ft)

6.0 m20.0 ft4.5 m15.0 ft3.0m

10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft

kglbkglbkglbkglbkglbkglbkglb

4.5 m(15.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach

Reach

m(ft)