R Series Diesel Counterbalanced Trucks - Toolmex...2019/02/02 · The World of Hangcha R Series...
Transcript of R Series Diesel Counterbalanced Trucks - Toolmex...2019/02/02 · The World of Hangcha R Series...
-
The World of Hangcha
R Series Diesel Counterbalanced Truckswith capacities of 1,000 to 3,500kg
HANGCHA trucksconform to the European Safety Requirements.ISO9001:2008ISO14001:2004
HANGCHA GROUP CO., LTD. reserves the right to make any changes without notice concerning colors,equipment,or specifications detailed in this brochure, or to discontinue individual models. The colors of trucks, delivered may di�er slightly from those in brochures.
20
18
VER
SIO
N 1
/CO
PYR
IGH
T 2
01
8/0
1
Factory site: 666 Xiangfu Road, Hangzhou, Zhejiang, China (311305)
ZHEJIANG HANGCHA IMP. &EXP. CO., LTD.
Tel: +86-571-88926735 88926755Fax: +86-571-88926789 88132890
-
Simple/Solid/Smart
The new generation R series forklift iscombined with durability and ergonomics, providing productivity enmatched by other forklifts and the comfort for hours of tireless operation, Add friendliness to the environment, simple servicing, e�ciency on the job, high standards of safety---it's the perfect tool for the most demanding application.
IntroductionE�ciency
Thanks to the long wheelbase
design, the longitudinal
stability of whole truck is much
better, the hoisting capacity at
same lift height are enhanced
by an average of 100kg
compared with former truck.
At the same time, it prolongs
work time of rear wheel as the
reduced rear axle's load.
The travel speed of truck has
been raised, for example, the
2-2.5t type comes t0 20km/h.
Increasing the hard proportion
of hydraulic pipe, adopting right
angle connector or straight
through connector, that reduce
the pressure loss of pipeline,
and raise the lifting speed of
mast, the speed is increased by
an average of 10% compared
with former truck.
Turning radius and width of
right angle stacking aisle are
decreased through reducing
the dimensions of whole truck,
that raise the e�ciency of
storehouse.
1.
4.
2.
3.
Simple,Easy: SERVICE
So much footroom: DRIVER ROOM
Simple, Comprehensive: PANEL
Strong, Wide view: MASTS
-
Servicing Safe
The clearance between the steering axle and support rod can be adjusted,
to improve the adaptability for ground.
The pin of the tilt cylinder adopts a build-in grease fitting, which enables
the greas fitting more dependable.
The high performance specific tires for forklift trucks increase the work
life of tires much more.
Easy opened engine cover and one-touch removal of the
floorboard get you right to service operation,and reduces
down-time.
The reasonable arrangement of fuse and installation of
instrument, enable the replacing for fuse and maintenance
for instrument more easy.
Environment FriendlyThe environment friendly engines all meet related
emission control regulation. The noise emission also
comes up to EU standard.
The Metal hood and molding sound insulation matches
environmental protection demands.
Wider
Softly
A throttling device is set in pipe system, the mast won't result in failing control of mast even some pipes broke.
By using a built-in hood lock device, the safe level of the truck has been raised.
For more than 30 years, HANGCHA GROUP
CO., LTD.Has played a leading role in the
manufacture and production of Chinese
forklift industry. We constantly strive to
develop and incorporate the latest advances in
forklift design and technology to ensure that our
products provide an optimum level of performance,
all the time. Our new generation R series of
forklifts truly exemplifies this commitment to
excellence.
AppearanceThe latest appearance design method was used to
create the R series fluent and aesthetic outline, that
matches the latest appearance trend.
The large engineering plastic covering enables the whole
truck looks friendly and natural.
Cooling SystemNewly adopted combined type aluminum radiator
improves the radiator cooling performance greatly.
Advanced heat dissipation technology improves heat
dissipation channel, that enhances the truck heat
dissipation capability further, the water temperature
is reduced 15% compared with former truck.
CylinderOil seal rings used for tilting cylinder\ lifting cylinder and
turning cylinder all adopt the first class international
product, the sealing performance has been proven
through ten of thousands fatigue test.
The soft landing system for lifting cylinder decreases the
level of noise and shock when the mast lowered to
termination phase.
BrakesThe forklifts all adopt the new type drum brake. water-
proof slot on the brake drum and framework oil seal on
the axle tube avoid water or oil entering the brake drum,
enable the dependability of brake to raise consumedly.5.
8.
6.
7.
Durable: HYDRAULICS
Cool, Smooth: TRANSMISSON
Clean, Reliable: ENGINES
Progressive: BRAKES
-
Adopted advanced ergonomic technology optimizes the
design of control system, improves the comfortable of
operation much more.
Adopted advanced vibration-reduction technology
designs each part's vibration reduction, reduces the
whole truck vibration. Among them, the hood is designed
to full floating type, and vibration reduction device for
steering axle enables the operation more comfortable.
The torque converter models adopt electronic-hydraulic
forward-reverse control technology, meaning less e�ort
and less total time used during this often-performed
function.
Adopted recently developed redirector decreases the
steering wheel force to 6~8N only ,that reduce 50%
compared with former truck.
The grease fittings and bushes added around the shaft
of control mechanism decreases the force of pedal, that
are reduced 30% compared with former truck.
The transmission can be chosen among OKAMURA. NISSAN and HC(made in china with the Japanese technique), with advanced structure and dependable function. Among them, the OKAMURA transmission adopts advanced float type struc-ture, which can achieve a flexible connection between engine and frame, the vibrations of transmis-sion to the frame is reduced. The engine can be chosen among the TD27. C240、4JG2. 4TNV94L diesel engine, with great power, economi-cal fuel consumption and depend-able functions.
OKAMURA 2-3t T/M is Floating Types, The only one in China. Floating types
are designed to reduce the transmission of vibrations to the chassis in small
and midsized (1 t0 5 tons) forlift trucks, thereby reducing operator fatigue
and improving nding comfort . Specially-shortened design is ideal for this
floating-type Installation.
Compact design o�ers same dimensions as conventional integrated models .
May be coupled to the di�erential axles. Making installation, removal, and
maintenance easy.
Transmission&Engine
Operation Options/ 2.0-5.Om duplex mast/ 2.5-4.Om full free duplex mast/ 4.3-6.5m triplex mast/ Special carriage and backrest/ Other dimension forks/ Dual drive wheel with fender/ Solid tyre/ Non-marking tyre(white. green)/ Cabin/ Heater and air conditioner/ Fire extinguisher/ Semi-suspension seat or full-suspension seat/ Dual air cleaner or special air cleaner/ Rear working light/ Customer painting/ Auxiliary hydraulic valve modules/ High-mounted exhaust system/ Middle-mounted exhaust system/ Spark arrester
/ Purified exhaust system/ Radiator screen/ Sideshifter/ Integrated sideshifter/ Other attachment
OKAMURAt r a n s m i s s i o n
OKAMURAnew floating type
ISUZU 4JG2 PE-01
Displacement3059ccRated output:44.9Kw/2450rpmRated torque:186.3N-m/1700rpm
YANMAR 4TNV94L
Displacement3054ccRated output:43Kw/2500rpmRated torque:205N-m/1000rpm
ISUZU C240
Displacement2369ccRated output:34.5Kw/2500rpmRated torque:137.7N-m/1800rpm
XINCHAI A498BT1
Displacement3168ccRated output:36.8Kw/2400rpmRated torque:186N-m/1700rpm
NISSAN TD27
Displacement2663ccRated output:38.5Kw/2300rpmRated torque:160N-m/2300rpm
Lower
-
R Seris1-1.8t forklift specification:
Note: ﹡With suspension seat or cabin.
1.Special lifting height avaliable(Duplex mast:2.5m,2.7m.3.0m,3.3m,3.6m,4m,4.5m.Triplex mast:4.3m,4.5m4.8m,5m,5.5m,6m) 2.Attachment available.
3.The specification in the table are for standard models only.For further information please contact us. 4.Specification are subject to change without notice.
Dis
ting
uish
ing
mar
kW
eigh
tTy
res,
cha
ssis
Dim
ensi
ons
Per
form
ance
dat
aCo
mbu
stio
n-en
gine
Add
itio
n da
ta
HANGCHA GROUP CO.,LTD.1.1
1.2
1.3
1.5
1.6
1.8
1.9
2.1
2.2
2.3
3.2
3.3
3.6
3.7
4.1
4.2
4.3
4.4
4.5
4.7
4.20
4.21
4.22
4.31
4.32
4.35
5.1
5.2
5.3
5.5
5.7
7.1
7.2
7.3
7.4
7.10
10.1
10.4
Manufacturer
Manufacturer's type designation
Drive: electric (battery or mains), diesel, petrol, fuel gas
Rated capacity/rated load
Load centre distance
Load distance, centre of drive axle to fork
Rear overhang
Wheelbase
Service Weight
Axle loading, laden front/rear
Axle loading, unladen front/rear
Tyre size, front
Tyre size, rear
Tread, front
Tread, rear
Tilt of mast/fork carriage forward/backward
Height, mast lowered
Free lift
Lift
Height, mast extended
Height of overhead guard (cabin)
Length to face of forks
Overall width
Fork dimensions ISO 2331
Ground clearance, laden, below mast
Ground clearance, centre of wheelbase
Turning radius
Travel speed, laden/unladen
Lift speed, laden/unladen
Lowering speed, laden/unladen
Drawbar pull, laden/unladen
Gradeability, laden/unladen
Engine manufacturer/type
Emission STD
Engine power according to DIN ISO 1585
Rated speed
Number of cylinders/displacement
Battery voltage/nominal capacity
Rated torque
Bore x stroke
Transmissions Manufacturer
Transmissions Type
Stage FWD/RVS
Operating pressure for attachments
Fuel tank capacity
3
Q (kg)
c (mm)
x (mm)
mm
y (mm)
kg
kg
kg
b10 (mm)
b11 (mm)
α/β(°)
h1 (mm)
h2 (mm)
h3 (mm)
h4 (mm)
h6 (mm)
l2 (mm)
b1(mm)
s/e/l (mm)
m1 (mm)
m2 (mm)
Wa (mm)
km/h
m/s
m/s
N
%
kw
min
(-)/(cm )
V/Ah
N·m/r/min
mm
bar
liter
mm"Min. right angle stacking aisle width
(Add load length and clearance)"
CPCD10N-RW10
Diesel
1000
500
405
420
1400
2450
2940/510
1290/1160
6.50-10-10PR
5.00-8-10PR
890
900
6/12
1995
155
3000
3960
2130 (2190*)
2225
1080
920x100x35
115
145
1925
-/14.5
0.460/-
0.450/-
20500/-
20/-
ISUZU/C240NKFC01
StageIIIA/GB3
35.4
2500
4/2369
12/60
137.7/1800
86x102
CHINA
Powershift
1/1
145
50
2330
CPCD10N-RW32
Diesel
1000
500
405
420
1400
2450
2940/510
1290/1160
6.50-10-10PR
5.00-8-10PR
890
900
6/12
1995
155
3000
3960
2130 (2190*)
2225
1080
920x100x35
115
145
1925
-/14.5
0.460/-
0.450/-
15900/-
20/-
YANMAR/4TNE92-HRJ
StageIIIA/Tier 3
32.8
2450
4/2659
12/60
149.4/1600
92x100
CHINA
Powershift
1/1
145
50
2330
CPCD10N-RG26
Diesel
1000
500
405
420
1400
2450
2940/510
1290/1160
6.50-10-10PR
5.00-8-10PR
890
900
6/12
1995
155
3000
3960
2130 (2190*)
2225
1080
920x100x35
115
145
1925
-/14.5
0.460/-
0.450/-
19500/-
20/-
XINCHAI/NC485BPBG
30
2600
4/2270
12/60
131/1600
CHINA
Powershift
1/1
145
50
2330
CPCD15N-RW10
Diesel
1500
500
405
460
1400
2740
3690/550
1220/1520
6.50-10-10PR
5.00-8-10PR
890
900
6/12
1995
155
3000
3960
2130 (2190*)
2265
1080
920x100x35
115
145
1970
-/14.5
0.510/-
0.450/-
20500/-
20/-
ISUZU/C240NKFC01
StageIIIA/GB3
35.4
2500
4/2369
12/60
137.7/1800
86x102
CHINA
Powershift
1/1
145
50
2375
CPCD15N-RW32
Diesel
1500
500
405
460
1400
2740
3690/550
1220/1520
6.50-10-10PR
5.00-8-10PR
890
900
6/12
1995
155
3000
3960
2130 (2190*)
2265
1080
920x100x35
115
145
1970
-/14.5
0.510/-
0.450/-
15900/-
20/-
YANMAR/4TNE92-HRJ
StageIIIA/Tier 3
32.8
2450
4/2659
12/60
149.4/1600
92x100
CHINA
Powershift
1/1
145
50
2375
CPCD15N-RG26
Diesel
1500
500
405
460
1400
2740
3690/550
1220/1520
6.50-10-10PR
5.00-8-10PR
890
900
6/12
1995
155
3000
3960
2130 (2190*)
2265
1080
920x100x35
115
145
1970
-/14.5
0.510/-
0.450/-
19500/-
20/-
XINCHAI/NC485BPBG
30
2600
4/2270
12/60
131/1600
CHINA
Powershift
1/1
145
50
2375
CPCD18N-RW10
Diesel
1750
500
410
495
1400
2930
4075/605
1190/1740
6.50-10-10PR
5.00-8-10PR
890
900
6/12
1995
155
3000
3960
2130 (2190*)
2300
1080
920x100x35
115
145
2005
-/14.5
0.510/-
0.450/-
20500/-
20/-
ISUZU/C240NKFC01
StageIIIA/GB3
35.4
2500
4/2369
12/60
137.7/1800
86x102
CHINA
Powershift
1/1
145
50
2410
CPCD18N-RW32
Diesel
1750
500
410
495
1400
2930
4075/605
1190/1740
6.50-10-10PR
5.00-8-10PR
890
900
6/12
1995
155
3000
3960
2130 (2190*)
2300
1080
920x100x35
115
145
2005
-/14.5
0.510/-
0.450/-
15900/-
20/-
YANMAR/4TNE92-HRJ
StageIIIA/Tier 3
32.8
2450
4/2659
12/60
149.4/1600
92x100
CHINA
Powershift
1/1
145
50
2410
CPCD18N-RG26
Diesel
1750
500
410
495
1400
2930
4075/605
1190/1740
6.50-10-10PR
5.00-8-10PR
890
900
6/12
1995
155
3000
3960
2130 (2190*)
2300
1080
920x100x35
115
145
2005
-/14.5
0.510/-
0.450/-
19500/-
20/-
XINCHAI/NC485BPBG
30
2600
4/2270
12/60
131/1600
CHINA
Powershift
1/1
145
50
2410
-
R series 2.0-2.5t forklift specification:
Note: ﹡With suspension seat or cabin.
1.Special lifting height avaliable(Duplex mast:2.5m,2.7m.3.0m,3.3m,3.6m,4m,4.5m.Triplex mast:4.3m,4.5m4.8m,5m,5.5m,6m) 2.Attachment available.
3.The specification in the table are for standard models only.For further information please contact us. 4.Spcification are subject to change without notice.
Dis
ting
uish
ing
mar
kW
eigh
tTy
res,
cha
ssis
Dim
ensi
ons
Per
form
ance
dat
aCo
mbu
stio
n-en
gine
Add
itio
n da
ta
HANGCHA GROUP CO.,LTD.1.1
1.2
1.3
1.5
1.6
1.8
1.9
2.1
2.2
2.3
3.2
3.3
3.6
3.7
4.1
4.2
4.3
4.4
4.5
4.7
4.20
4.21
4.22
4.31
4.32
4.35
5.1
5.2
5.3
5.5
5.7
7.1
7.2
7.3
7.4
7.10
10.1
10.4
Manufacturer
Manufacturer's type designation
Drive: electric (battery or mains), diesel, petrol, fuel gas
Rated capacity/rated load
Load centre distance
Load distance, centre of drive axle to fork
Rear overhang
Wheelbase
Service Weight
Axle loading, laden front/rear
Axle loading, unladen front/rear
Tyre size, front
Tyre size, rear
Tread, front
Tread, rear
Tilt of mast/fork carriage forward/backward
Height, mast lowered
Free lift
Lift
Height, mast extended
Height of overhead guard (cabin)
Length to face of forks
Overall width
Fork dimensions ISO 2331
Ground clearance, laden, below mast
Ground clearance, centre of wheelbase
Turning radius
Travel speed, laden/unladen
Lift speed, laden/unladen
Lowering speed, laden/unladen
Drawbar pull, laden/unladen
Gradeability, laden/unladen
Engine manufacturer/type
Emission STD
Engine power according to DIN ISO 1585
Rated speed
Number of cylinders/displacement
Battery voltage/nominal capacity
Rated torque
Bore x stroke
Transmissions Manufacturer
Transmissions Type
Stage FWD/RVS
Operating pressure for attachments
Fuel tank capacity
3
Q (kg)
c (mm)
x (mm)
mm
y (mm)
kg
kg
kg
b10 (mm)
b11 (mm)
α/β(°)
h1 (mm)
h2 (mm)
h3 (mm)
h4 (mm)
h6 (mm)
l2 (mm)
b1(mm)
s/e/l (mm)
m1 (mm)
m2 (mm)
Wa (mm)
km/h
m/s
m/s
N
%
kw
min
(-)/(cm )
V/Ah
N·m/r/min
mm
bar
liter
mm"Min. right angle stacking aisle width
(Add load length and clearance)"
Diesel
2000
500
475
405
1650
3440
4815/625
1640/1800
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2530
1155
1070x122x40
105
150
2175
-/20.5
0.410/-
0.500/-
17000
20/-
ISUZU/C240NKFC01
StageIIIA/GB3
35.4
2500
4/2369
12/90
137.7/1800
86x102
2650
CPCD25N-RW33B
CPCD20N-RW10B
Diesel
2000
500
475
405
1650
3440
4815/625
1640/1800
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2530
1155
1070x122x40
105
150
2175
2650
CPCD20N-RW13
CPCD20N-RW15A
Diesel
2000
500
475
405
1650
3440
4815/625
1640/1800
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2530
1155
1070x122x40
105
150
2175
2650
CPCD20N-RW27
CPCD20N-RW32
Diesel
2000
500
475
405
1650
3440
4815/625
1640/1800
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2530
1155
1070x122x40
105
150
2175
-/20
0.500/-
0.500/-
YANMAR4TNE98-BQFLC
StageIIIA/Tier3
42.1
2300
4/3319
12/90
186/1700
98x110
2650
CPCD20N-RW33
CPCD20N-RW33B
Diesel
2000
500
475
405
1650
3440
4815/625
1640/1800
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2530
1155
1070x122x40
105
150
2175
-/20
0.580/-
0.500/-
CUMMINS/QSF2.8t3NA49
StageIIIA
36.5
2500
4/2800
12/90
186/1500
94x100
2650
CPCD20N-RW43
CPCD20N-RW43B
Diesel
2000
500
475
405
1650
3440
4815/625
1640/1800
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2530
1155
1070x122x40
105
150
2175
-/20
0.530/-
0.500/-
MITSUBISHI/S4S-Z362CSFL
StageIIIA
35.3
2250
4/3331
12/90
177/1700
94x120
2650
CPCD20N-RW55
CPCD20N-RW55B
Diesel
2000
500
475
405
1650
3440
4815/625
1640/1800
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2530
1155
1070x122x40
105
150
2175
-/20
0.580/-
0.500/-
YANMAR/4TNV94L-BXPHZ
StageIIIA
34.6
2400
4/3054
12/90
191~208.5/1500
94x110
2650
CPCD20N-RW56
CPCD20N-RW56B
Diesel
2000
500
475
405
1650
3440
4815/625
1640/1800
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2530
1155
1070x122x40
105
150
2175
2650
CPCD20N-RG2
CPCD20N-RG5
Diesel
2500
500
475
480
1650
3765
5530/735
1560/2205
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200 *)
2605
1155
1070x122x40
105
150
2235
-/20.5
0.480/-
0.500/-
17000
20/-
ISUZU/C240NKFC01
StageIIIA/GB3
35.4
2500
4/2369
12/90
137.7/1800
86x102
2710
CPCD25N-RW10
CPCD25N-RW10B
Diesel
2500
500
475
480
1650
3765
5530/735
1560/2205
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200 *)
2605
1155
1070x122x40
105
150
2235
2710
CPCD25N-RW13
CPCD25N-RW15A
Diesel
2500
500
475
480
1650
3765
5530/735
1560/2205
7.00-12-12PRR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200 *)
2605
1155
1070x122x40
105
150
2235
2710
CPCD25N-RW27
CPCD25N-W32
Diesel
2500
500
475
480
1650
3765
5530/735
1560/2205
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200 *)
2605
1155
1070x122x40
105
150
2235
-/20
0.580/-
0.500/-
YANMAR/4TNE98-BQFLC
StageIIIA/Tier3
42.1
2300
4/3319
12/90
186/1700
98x110
2710
CPCD25N-RW33
CPCD25N-RW33B
Diesel
2500
500
475
480
1650
3765
5530/735
1560/2205
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2605
1155
1070x122x40
105
150
2235
-/20
0.580/-
0.500/-
CUMMINS/QSF2.8t3NA49
StageIIIA
36.5
2500
4/2800
12/90
186/1500
94x100
2710
CPCD25N-RW43
CPCD25N-RW43B
Diesel
2500
500
475
480
1650
3765
5530/735
1560/2205
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2605
1155
1070x122x40
105
150
2235
-/20
0.530/-
0.500/-
MITSUBISHI/S4S-Z362CSFL
StageIIIA
35.3
2250
4/3331
12/90
177/1700
94x120
2710
CPCD25N-RW55
CPCD25N-RW55B
Diesel
2500
500
475
480
1650
3765
5530/735
1560/2205
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200*)
2605
1155
1070x122x40
105
150
2235
-/20
0.580/-
0.500/-
YANMAR/4TNV94L-BXPHZ
StageIIIA
34.6
2400
4/3054
12/90
191~208.5/1500
94x110
2710
CPCD25N-RW56
CPCD25N-RW56B
Diesel
2500
500
475
480
1650
3765
5530/735
1560/2205
7.00-12-12PR
6.00-9-10PR
965
970.5
6/12
1985
140
3000
4045
2140 (2200 *)
2605
1155
1070x122x40
105
150
2235
2710
CPCD25N-RG2
CPCD25N-RG5
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
-/20
0.510/-
0.500/-
22700
20/-
Stagell
46
2450
4/3059
12/90
186/1700
95.4x107
CHINA
Powershift
1/1
175
60
ISUZU/4JG2PE-01
XINCHAI/A498BT1-1
YANMAR/4TNE92-HRJ
XINCHAI/C490BPG
XINCHAI/A490BPG
ISUZU/4JG2 PE-01
XINCHAI/A498BT1-1
XINCHAI/C490BPG
XINCHAI/A490BPG
YANMAR/4TNE92-HRJ
StageIIIA/Tier 3
StageIIIA /Tier 3
-/18
0.500/-
0.500/-
23100
20/-
UD/TD27
38.5
2300
4/2663
12/90
160/2300
96X92
EXIDY
Powershift
1/1
175
60
-/19.5
0.450/-
0.500/-
22600
20/-
StageIIIA
36.8
2400
4-3168
12/90
186/1700
98x105
CHINA
Powershift
1/1
175
60
-/20
0.500/-
0.500/-
14500
20/-
32.8
2450
4/2659
12/90
149.4/1600
92x100
CHINA
Powershift
1/1
175
60
-/22
0.580/-
0.500/-
18700
20/-
40
2650
4/2670
12/90
160/1800-2000
90x105
CHINA
Powershift
1/1
175
60
-/20.5
0.470/-
0.500/-
18000
20/-
37
2650
4/2540
12/90
148/1900
90x100
CHINA
Powershift
1/1
175
60
-/20
0.580/-
0.500/-
22700
20/-
StageIII
46
2450
4/3059
12/90
186/1700
95.4x107
CHINA
Powershift
1/1
175
60
-/18
0.570/-
0.500/-
23100
20/-
UD/TD27
38.5
2300
4/2663
12/90
160/2300
96x82
EXIDY
Powershift
1/1
175
60
-/19.5
0.520/-
0.500/-
22600
20/-
StageIIIA
36.8
2400
4/3168
12/90
186/1700
98x105
CHINA
Powershift
1/1
175
60
-/20
0.580/-
0.500/-
14500
20/-
32.8
2450
4/2659
12/90
149.4/1600
92x100
CHINA
Powershift
1/1
175
60
-/22
0.580/-
0.500/-
18700
20/-
40
2650
4/2670
12/90
160/180-2000
90x105
CHINA
Powershift
1/1
175
60
-/20.5
0.540/-
0.500/-
18000
20/-
37
2650
4/2540
12/90
148/1900
90x100
CHINA
Powershift
1/1
175
60
18500
20/-
19700
20/-
19500
20/-
18500
20/-
19300
20/-
18300
20/-
19500
20/-
18500
20/-
18500
20/-
19700
20/-
19500
20/-
18500
20/-
19300
20/-
18300
20/-
19500
20/-
18500
20/-
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
CHINA
Powershift
1/1
175
60
OKAMURA
Powershift
1/1
175
60
-
R series 3.0-3.5t forklift specification:
Note: ﹡With suspension seat or cabin.
1.Special lifting height avaliable(Duplex mast:2.5m,2.7m.3.0m,3.3m,3.6m,4m,4.5m.Triplex mast:4.3m,4.5m4.8m,5m,5.5m,6m) 2.Attachment available.
3.The specification in the table are for standard models only.For further information please contact us. 4.Spcification are subject to change without notice.
Dis
ting
uish
ing
mar
kW
eigh
tTy
res,
cha
ssis
Dim
ensi
ons
Per
form
ance
dat
aCo
mbu
stio
n-en
gine
Add
itio
n da
ta
HANGCHA GROUP CO.,LTD.1.1
1.2
1.3
1.5
1.6
1.8
1.9
2.1
2.2
2.3
3.2
3.3
3.6
3.7
4.1
4.2
4.3
4.4
4.5
4.7
4.20
4.21
4.22
4.31
4.32
4.35
5.1
5.2
5.3
5.5
5.7
7.1
7.2
7.3
7.4
7.10
10.1
10.4
Manufacturer
Manufacturer's type designation
Drive: electric (battery or mains), diesel, petrol, fuel gas
Rated capacity/rated load
Load centre distance
Load distance, centre of drive axle to fork
Rear overhang
Wheelbase
Service Weight
Axle loading, laden front/rear
Axle loading, unladen front/rear
Tyre size, front
Tyre size, rear
Tread, front
Tread, rear
Tilt of mast/fork carriage forward/backward
Height, mast lowered
Free lift
Lift
Height, mast extended
Height of overhead guard (cabin)
Length to face of forks
Overall width
Fork dimensions ISO 2331
Ground clearance, laden, below mast
Ground clearance, centre of wheelbase
Turning radius
Travel speed, laden/unladen
Lift speed, laden/unladen
Lowering speed, laden/unladen
Drawbar pull, laden/unladen
Gradeability, laden/unladen
Engine manufacturer/type
Emission STD
Engine power according to DIN ISO 1585
Rated speed
Number of cylinders/displacement
Battery voltage/nominal capacity
Rated torque
Bore x stroke
Transmissions Manufacturer
Transmissions Type
Stage FWD/RVS
Operating pressure for attachments
Fuel tank capacity
3
Q (kg)
c (mm)
x (mm)
mm
y (mm)
kg
kg
kg
b10 (mm)
b11 (mm)
α/β(°)
h1 (mm)
h2 (mm)
h3 (mm)
h4 (mm)
h6 (mm)
l2 (mm)
b1(mm)
s/e/l (mm)
m1 (mm)
m2 (mm)
Wa (mm)
km/h
m/s
m/s
N
%
kw
min
(-)/(cm )
V/Ah
N·m/r/min
mm
bar
liter
mm"Min. right angle stacking aisle width
(Add load length and clearance)"
CPCD30N-RW10
CPCD30N-RW10B
CHINA
Powershift
1/1
175
70
OKAMURA
Powershift
1/1
175
70
CPCD30N-RW13
CPCD30N-RW15A
Diesel
3000
500
480
510
1760
4255
6480/775
1765/2490
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2010
145
3000
4140
2170 (2230*)
2750
1225
1070x122x45
130
175
2375
CPCD30N-RW27
CPCD30N-RW32
Diesel
3000
500
480
510
1760
4255
6480/775
1765/2490
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2010
145
3000
4140
2170 (2230*)
2750
1225
1070x122x45
130
175
2375
-/19
0.380/-
0.500/-
18400/-
15/-
ISUZU/C240NKFC01
StageIIIA/GB3
35.4
2500
4/2369
12/90
137.7/1800
86x102
2855 2855
Diesel
3000
500
480
510
1760
4255
6480/775
1765/2490
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2010
145
3000
4140
2170 (2230*)
2750
1225
1070x122x45
130
175
2375
2855
CPCD30N-RW33
CPCD30N-RW33B
Diesel
3000
500
480
510
1760
4255
6480/775
1765/2490
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2010
145
3000
4140
2170 (2230*)
2750
1225
1070x122x45
130
175
2375
YANMAR/4TNE98-BQFLC
StageIIIA/Tier3
42.1
2300
4/3319
12/90
186/1700
98x110
2855
CPCD30N-RW43
CPCD30N-RW43B
Diesel
3000
500
480
510
1760
4255
6480/775
1765/2490
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2010
145
3000
4140
2170 (2230*)
2750
1225
1070x122x45
130
175
2375
CUMMINS/QSF2.8t3NA49
StageIIIA
36.5
2500
4/2800
12/90
186/1500
94x100
2855
CPCD30N-RW55
CPCD30N-RW55B
Diesel
3000
500
480
510
1760
4255
6480/775
1765/2490
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2010
145
3000
4140
2170 (2230*)
2750
1225
1070x122x45
130
175
2375
MITSUBISHI/S4S-Z362CSFL
StageIIIA
35.3
2250
4/3331
12/90
177/1700
94×120
2855
CPCD30N-RW56
CPCD30N-RW56B
Diesel
3000
500
480
510
1760
4255
6480/775
1765/2490
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2010
145
3000
4140
2170 (2230*)
2750
1225
1070x122x45
130
175
2375
YANMAR/4TNV94L-BXPHZ
StageIIIA
34.6
2400
4/3054
12/90
191~208.5/1500
94×110
2855
CPCD30N-RG2
CPCD30N-RG5
Diesel
3000
500
480
510
1760
4255
6480/775
1765/2490
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2010
145
3000
4140
2170 (2230*)
2750
1225
1070x122x45
130
175
2375
2855
CPCD35N-RW13
CPCD35N-RW15A
CPCD35N-RW27
Diesel
3500
500
485
555
1760
4555
7195/860
1890/2665
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2160
150
3000
4140
2170 (2230*)
2800
1225
1070x122x50
130
175
2415
2900
CPCD35N-RW33
CPCD35N-RW33B
Diesel
3500
500
485
555
1760
4555
7195/860
1890/2665
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2160
150
3000
4140
2170 (2230*)
2800
1225
1070x122x50
130
175
2415
YANMAR/4TNE98-BQFLC
StageIIIA/Tier3
42.1
2300
4/3319
12/90
186/1700
98x110
2900
CPCD35N-RW43
CPCD35N-RW43B
Diesel
3500
500
485
555
1760
4555
7195/860
1890/2665
28x9-15-14PR
6.50-10-10.PR
1005
973.5
6/12
2160
150
3000
4140
2170 (2230*)
2800
1225
1070x122x50
130
175
2415
CUMMINS/QSF2.8t3NA49
StageIIIA
36.5
2500
4/2800
12/90
186/1500
94×100
2900
CPCD35N-RW55
CPCD35N-RW55B
Diesel
3500
500
485
555
1760
4555
7195/860
1890/2665
28x9-15-14PR
6.50-10-10.PR
1005
973.5
6/12
2160
150
3000
4140
2170 (2230*)
2800
1225
1070x122x50
130
175
2415
MITSUBISHI/S4S-Z362CSFL
StageIIIA
35.3
2250
4/3331
12/90
177/1700
94×120
2900
CPCD35N-RW56
CPCD35N-RW56B
Diesel
3500
500
485
555
1760
4555
7195/860
1890/2665
28x9-15-14PR
6.50-10-10.PR
1005
973.5
6/12
2160
150
3000
4140
2170 (2230*)
2800
1225
1070x122x50
130
175
2415
YANMAR/4TNV94L-BXPHZ
StageIIIA
34.6
2400
4/3054
12/90
191~208.5/1500
94×110
2900
CPCD35N-RG2
CPCD35N-RG5
Diesel
3500
500
485
555
1760
4555
7195/860
1890/2665
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2160
150
3000
4140
2170 (2230*)
2800
1225
1070x122x50
130
175
2415
2900
Diesel
3500
500
485
555
1760
4555
7195/860
1890/2665
28x9-15-14PR
6.50-10-10PR
1005
973.5
6/12
2160
150
3000
4140
2170 (2230*)
2800
1225
1070x122x50
130
175
2415
-/18
0.360/-
0.500/-
24500/-
20/-
StageIIIA
36.8
2400
4/3168
12/90
186/1700
98x105
CHINA
Powershift
1/1
175
70
2900
-/18.5
0.460/-
0.500/-
24600/-
20/-
Stage II
46
2450
4/3059
12/90
186/1700
95.4x107
CHINA
Powershift
1/1
175
70
-/18
0.460/-
0.500/-
23100/-
20/-
UD/TD27
38.5
2300
4/2663
12/90
160/2300
96x92
EXIDY
Powershift
1/1
175
70
-/18
0.410/-
0.500/-
24500/-
20/-
StageIIIA
36.8
2400
4/3168
12/90
186/1700
98x105
CHINA
Powershift
1/1
175
70
-/18
0.430/-
0.500/-
17600/-
15/-
32.8
2450
4/2659
12/90
149.4/1600
92x100
CHINA
Powershift
1/1
175
70
-/18
0.500/-
0.500/-
23600/-
20/-
CHINA
Powershift
1/1
175
70
-/20
0.460/-
0.500/-
20700/-
20/-
OKAMURA
Powershift
1/1
175
70
-/18
0.460/-
0.500/-
21400/-
20/-
CHINA
Powershift
1/1
175
70
-/20
0.460/-
0.500/-
20200/-
20/-
OKAMURA
Powershift
1/1
175
70
-/18
0.420/-
0.500/-
21200/-
20/-
CHINA
Powershift
1/1
175
70
-/20
0.420/-
0.500/-
20000/-
20/-
OKAMURA
Powershift
1/1
175
70
-/18
0.460/-
0.500/-
21400/-
20/-
CHINA
Powershift
1/1
175
70
-/20
0.460/-
0.500/-
20200/-
20/-
OKAMURA
Powershift
1/1
175
70
-/18
0.460/-
0.500/-
23600/-
20/-
CHINA
Powershift
1/1
175
70
-/20
0.360/-
0.500/-
20700/-
20/-
OKAMURA
Powershift
1/1
175
70
-/18
0.390/-
0.500/-
21400/-
18/-
CHINA
Powershift
1/1
175
70
-/20
0.390/-
0.500/-
20200/-
18/-
OKAMURA
Powershift
1/1
175
70
-/18
0.360/-
0.500/-
21200/-
18/-
CHINA
Powershift
1/1
175
70
-/20
0.360/-
0.500/-
20000/-
18/-
OKAMURA
Powershift
1/1
175
70
-/18
0.390/-
0.500/-
21400/-
18/-
CHINA
Powershift
1/1
175
70
-/20
0.390/-
0.500/-
20200/-
18/-
OKAMURA
Powershift
1/1
175
70
-/20
0.360/-
0.500/-
20300/-
15/-
40
2650
4/2670
12/90
160/1800-2000
90x105
CHINA
Powershift
1/1
175
70
-/19
0.340/-
0.500/-
19500/-
15/-
37
2650
4/2540
12/90
148/1900
90x100
CHINA
Powershift
1/1
175
70
-/20
0.460/-
0.500/-
20300/-
20/-
40
2650
4/2670
12/90
160/1800-2000
90x105
CHINA
Powershift
1/1
175
70
-/19
0.430/-
0.500/-
19500/-
18/-
37
2650
4/2540
12/90
148/1900
98x105
CHINA
Powershift
1/1
175
70
-/18.5
0.360/-
0.500/-
24600/-
20/-
StageII
46
2450
4/3059
12/90
186/1800
95.4x107
CHINA
Powershift
1/1
175
70
-/18
0.360/-
0.500/-
23100/-
15/-
UD/TD27
38.5
2300
4/2663
12/90
160/2300
96x92
EXIDY
Powershift
1/1
175
70
ISUZU/4JG2 PE-01
XINCHAI/A498BT1-1
YANMAR/4TNE92-HRJ
XINCHAI/C490BPG
ISUZU/4JG2PE-01
XINCHAI/C490BPG
XINCHAI/A490BPG
XINCHAI/A490BPG
StageIIIA/Tier 3
XINCHAI/A498BT1-1
-
1.0-1.8t R series mast:(pneumatic)
With sideshifter minus 150Kg,with integral sideshifter minus 100kg
Tilt range Capacity
Load capacity at 500mmSingle tire Double tire
Capacity
Load capacity at 600mmSingle tire Double tire
FrontOverhang
mm1 / 1.5t
BWDFWD
mm
With backrest
mm
Without backrest
mm
With backrest
mm
Without backrest
mmmm
Max. fork height Lowered
Extended
Free liftOverall height
ModelTy
peW
ide
view
mas
t W
ide
view
fu
ll fr
ee
dupl
ex m
ast
Wid
e vi
ew
full
free
tr
iple
x m
ast
R15/18M200R15/18M250R15/18M270R15/18M300R15/18M330R15/18M350R15/18M360R15/18M400R15/18M430R15/18M450R15/18M480R15/18M500N15/18U250N15/18U270N15/18U300N15/18U330N15/18U360N15/18U400N15/18N400N15/18N430N15/18N450N15/18N480N15/18N500N15/18N550N15/18N600N15/18N650N15/18N700
200025002700300033003500360040004300450048005000250027003000330036004000400043004500480050005500600065007000
149517451845199521452245234525952745284529953095176018602010216023102560201021102120223522852460268558503085
258530853285358538854085418545854885508553655565310533053605390542054605477050705130544556056120669571607795
295534553655395542554455455549555255545557555955345536553955425545554955495552555465575559556455695574557955
155155155155155155155155155155155155
109511951395154516951865125013501510160016901850200022002300
155155155155155155155155155155155155815915
1055121513651615106511651175129013401515174019052140
405405405405405405405405405405405405428428428428428428428445445445445445445445445
mm1.75t
410410410410410410410410410410410410433433433433433433433450450450450450450450450
666666666666666666666663333
12121212121212126666
121212121212666666666
kg
1t
1000100010001000100010001000950900850750700
10001000100010001000950900850800750700
////
kg
1.5t
15001500150015001500150015001400130012501100105015001500150015001500140013001250120011001050
////
kg
1.75t
17501750175017501750175017501650155014501250115017501750175017501750165015501450135012501150
////
kg
1t
10001000100010001000100010001000950900800750
100010001000100010001000950900850800750600450
//
kg
1.5t
15001500150015001500150015001500140013501200115015001500150015001500150014001350130012001150950750550350
kg
1.75t
175017501750175017501750175017501650155013501250175017501750175017501750165015501450135012501050850650450
kg
1t
900900900900900900900850800750670620900900900900900850800750700670620
////
kg
1.5t
13501350135013501350135013501250115011001000950
1350135013501350135012501150112011001000950
////
kg
1.75t
15501550155015501550155015501500140013001100105015501550155015501550150014001300120011001050
////
kg
1t
900900900900900900900900850800700670900900900900900900850800750700670550400
//
kg
1.5t
13501350135013501350135013501350125012001100103013501350135013501350135012501200115011001030850670500300
kg
1.75t
15501550155015501550155015501550150014001200110015501550155015501550155015001400130012001100950750570400
(°) (°)
With sideshifter minus 150Kg,with integral sideshifter minus 100kg
2.0-2.5t R series mast:(pneumatic)Tilt range Capacity
Load capacity at 500mmSingle tire Doublel tire
FrontOverhang
mm
BWDFWD
mm
With backrest
mm
Without backrest
mm
With backrest
mm
Without backrest
mmmm
Max. fork height Lowered
Extended
Free liftOverall height
Model
Type
Wid
e vi
ew m
ast
Wid
e vi
ew
full
free
du
plex
mas
t
Wid
e vi
ew
full
free
tr
iple
x m
ast
4 c
ylin
ders
tr
iple
x m
ast
R25M250R25M270R25M300R25M330R25M350R25M360R25M400R25M430R25M450R25M480R25M500N25U250N25U270N25U300N25U330N25U360N25U400N25N400N25N430N25N450N25N470N25N480N25N500N25N550N25N600N25N650N25N700N25D400N25D430N25D450N25D470N25D480N25D500N25D550N25D600N25D650N25D700
2500270030003300350036004000430045004800500025002700300033003600400040004300450047004800500055006000650070004000430045004700480050005500600065007000
1745184519952145224523452595274528452995309518101910201021602310256019552055212521742225229024552675285030552024212421892254228923592574273929093074
3135333536353935413542354635493551355435563531703370367039704270467046954955524553855495569561956705719577254696499651965396549656966235673072407735
3545374540454345454546455045534555455845604535453745404543454645504550555355560557455855605565557055755580555056535655565756585660566556705675568056
140140140140140140140140140140140
11401240134014901640189012701370144014881540160517701990216523401338143815031568160316731888205322232388
140140140140140140140140140140140760860960
111012601510910
101010801128118012451410163018052010978
107811431208124313131528169318632028
470470470470470470470470470470470460460460460460460475475475475475475475475475475467467467467467467467467467467
6666666666666666666666633336666663333
121212121212126666
12121212121266666666666666666666
kg
2t
2000200020002000200020002000195019001700160020002000200020002000200019501900180017001700160015001400145013001950190018001700170016001500140014501300
kg
2.5t
250025002500250025002500230021002000170016002500250025002500250023002100200019001700170016001200800
//
2100200019001700170016001200800
//
kg
2t
200020002000200020002000190018001700150014002000200020002000200019001800170016001500150014001050700
//
1800170016001500150014001050700
//
kg
2.5t
2500250025002500250025002500245024002100250025002500250025002500250024502400230021002100200018001600130012002450240023002100210020001800160013001200
(°) (°)
3.0-3.5t R series mast:(pneumatic)
With sideshifter minus 200Kg,with integral sideshifter minus 100kg
Capacity
Load capacity at 500mmSingle tire Double tire
Capacity
Load capacity at 600mmSingle tire Double tire
FrontOverhang
With backrestWithout backrestWithout backrest
Without backrest
mmmm
Max. fork height
LoweredExtended
Free liftOverall height
Model
Type
Wid
e vi
ew m
ast
Wid
e vi
ew
full
free
du
plex
mas
t
Wid
e vi
ew
full
free
tr
iple
x m
ast
4 c
ylin
ders
tr
iple
x m
ast
R30/35M250R30/35M270R30/35M300R30/35M330R30/35M350R30/35M360R30/35M400R30/35M430R30/35M450R30/35M480R30/35M500N30/35U250N30/35U270N30/35U300N30/35U330N30/35U360N30/35U400N30/35N400N30/35N430N30/35N450N30/35N470N30/35N480N30/35N500N30/35N550N30/35N600N30/35N650N30/35N700N30/35D400N30/35D430N30/35D450N30/35D470N30/35D480N30/35D500N30/35D550N30/35D600N30/35D650N30/35D700
2500270030003300350036004000430045004800500025002700300033003600400040004300450047004800500055006000650070004000430045004700480050005500600065007000
mm
3t 3.5t
1770187020202170227023702620277028703020312018801980220522402390259020052105217522142275234025052725290031052039213922042269230423742589275429243089
1920202021702320242024702720287029703120322019902090220523902550275021002205227523142375244026052770300031702094219422642329236424302594281429893159
mm
3t
3185338536853985418542854685498551855485568532603460377540704370477047805080533555005580578062806780728077804781508152815991613164037161793186219291
mm
3.5t
3295349537954095429543954795509552955595579533553555384541554455485548555155535555055655585563556855735578554856515653565556565658566356685673567856
mm
3t
3640384041404440464047405140544056405940614036453845415544554755515551525455570558955955615566557155765081505152545256525852595261526652715276528152
mm
3.5t
3640384041404440464047405140544056405940614036553855414544554755515551555455564058405955615566557155765081505152545256525852595261526652715276528152
mm
3t
145145145145145145145145145145145
11201220144014801630183012351335140514751505157017351955213023351268136814331498153316031818198321532318
mm
3.5t
150150150150150150150150150150150
11401240136015401700190012601360143015151530159517601925215523251248134814181483151815841748196821432313
mm
3t
145145145145145145145145145145145735835
1060109512451445860960
10301080113011951360158017551960897997
10621127116212321447161217821947
mm
3.5t
150150150150150150150150150150150845945
1060124514051605960
106011301180123012951460162518502125952
105211221187122212881452167218472017
mm
3t
480480480480480480480480480480480480480480480480480490490490490490490490490490490480480480480480480480480480480
mm
3.5t
490490490490490490490490490490490485485485485485485505505505505505505505505505505491491491491491491491491491491
Tilt range
BWDFWD
(°)6666666666666666666666633336666663333
(°)121212121212126666
12121212121266666666666666666666
kg
3t
3000300030003000300030002850270025502250210030003000300030003000285027002550240022502250210016501200
//
27002550240022502250210016501200
//
kg
3.5t
3500350035003500350035003250300028502450230035003500350035003500325030002850270024502450230018001300
//
30002850270024502450230018001300
//
kg
3t
3000300030003000300030003000290028502550240030003000300030003000300029002850270025502550240022502100195018002900285027002550255024002250210019501800
kg
3.5t
3500350035003500350035003500340033502950280035003500350035003500350034003350320029502950280025502300205018503400335032002950295028002550230020501850
kg
3t
2720272027202720272027202580245023002040190027202720272027202720258024502300217020402040190015001080750
/24502300217020402040190015001080750
/
kg
3.5t
3200320032003200320032002900270026002200210032003200320032003200290027002600245022002200210016501200
//
27002600245022002200210016501200
//
kg
3t
2720272027202720272027202720263025802300217027202720272027202720272026302580245023002300217020401900175016502630258024502300230021702040190017501650
kg
3.5t
3200320032003200320032003200310030502650255032003200320032003200320031003050290026502650255023002100185016703100305029002650265025502300210018501670
1750