R-4 - Magnetic Probe Extensometer · 2020. 2. 10. · nometer casings. The use of a probe...
Transcript of R-4 - Magnetic Probe Extensometer · 2020. 2. 10. · nometer casings. The use of a probe...
-
The R-4 is used to manually measure settlement or heave of soils at various depths,
allowing the end user to create settlement/heave.
VERSATILE, EASY TO USE MAGNETIC REED SWITCH PROBE
Key Features
www.telemac.fr
Description
The R-4 consists of a magnetic reed switch mounted on a grad-
uated tape and reel. The switch is activated by magnetic targets
installed at different elevations along an access pipe in a borehole
or within an embankment or fill.
The R-4 detects the position of the magnetic anchors outside the riser pipe when it is lowered down the access pipe. The probe is suspended by a single graduated tape that incorporates the electri-cal leads. The tape graduation is used to determine the probe's precise position relative to the magnets. Comparison of these loca-tions allows heave and settlement determination.
The magnetic anchors are available in three configurations: leaf
spring anchor for borehole installation, plate anchor for embank-
ment or fill installation and datum magnet that is fixed directly to the
bottom section of access pipe. The leaf spring anchor can be
pushed in place or lowered with the access pipe and released with
an external draw wire.
The plate magnet is a plate with a central hole. The plate magnets
are installed over the riser pipe and between the layers of placed
fill, as the filling operation proceeds.
Telescoping couplings are used where deformations exceeding 1%
are expected. The R-4 system is compatible with standard incli-
nometer casings. The use of a probe centralizer is recommended
for repeatable readings.
R-4 - Magnetic Probe Extensometer Extensometer / Settlement
Applications
Easy to use
Versatile
Bearing capacity estimation of shallow and deep
foundations
Settlement estimation of all types of foundations
Deformation of laterally loaded piles and sheet piles
-
Specifications
Telemac SAS 10, avenue Eiffel 77220 Gretz-Armainvilliers, France
Phone +33 1 64 06 40 80 Fax. +33 1 64 06 40 26
Email [email protected] Web www.telemac.fr
Telemac SAS reserves the right to make any changes in the specifications without prior notice E5013E-200122
Readout Unit and Magnet model
READOUT UNIT (probe and reel)
Model No. Cable length Resolution
FR-1013E50100A 30m 1 mm
FR-1013E50100B 50m 1 mm
FR-1013E50100C 100m 1 mm
FR-1013E50100D 150m 1 mm
LEAF SPRING MAGNET
Model No. Min. borehole diameter
Released
Outside diameter Casing
FR-1131A50100 101 mm 222 mm 33 mm
FR-1131A50100C 101 mm 254 mm 48 mm
FR-1131A50100A 127 mm 279 mm 70 mm
FR-1131A50100B 152 mm 305 mm 85 mm
PLATE MAGNET
Model No. Casing
FR-1131A50200 33 mm
FR-1131A50200C 48 mm
FR-1131A50200A 70 mm
FR-1131A50200B 85 mm
R-4 - Magnetic Probe Extensometer Extensometer / Settlement
Note: Probe with 100 or 300ft of cable also available
Probe: Stainless steel, 14.3 x 227mm
Cable: Epoxy coated steel tape with medium density polyethylene jacket Metric cables have 1mm graduations and imperial cable have 0.01ft graduation
Reel: 263 or 300mm in diameter depending on cable length
Battery: The readout operates on with one 9-Volt alkaline cell.
Material: Magnet body in PVC
Temperature range: -30°C to +80°C
Plate magnet dimensions: 200 x 200 x 9.5 mm standard, 300 x 300 x 9.5 mm optionnal
Access tube: -Standard 1’’ pipe sch.80 flush-coupled PVC pipe (33mm)
(telescoping sections available if large settlementss are anticipated)
- 70mm or 85mm inclinometric casing
- optional 1.5’’ pipe sch.80 flush-coupled PVC pipe (48mm)
DATUM RING MAGNET
Model No. Casing
FR-1131A50300 33mm
FR-1131A50300C 48mm
FR-1131A50300A 70mm
FR-1131A50300B 85mm
-
Please specify:
Borehole diameter and depth
Access tube model and length (For more information about 70 and 85 mm O.D. access tube, please refer to standard inclinometer casing data sheets)
Telescoping section
Anchor model number
Readout instruments model no.
Probe and Anchor Typical Installation
Telemac SAS 10, avenue Eiffel 77220 Gretz-Armainvilliers, France
Phone +33 1 64 06 40 80 Fax. +33 1 64 06 40 26
Email [email protected] Web www.telemac.fr
Telemac SAS reserves the right to make any changes in the specifications without prior notice E5013E-200122
Ordering Information
Optional Accessories
Probe centralizer
Collar tape guide
R-4 - Magnetic Probe Extensometer Extensometer / Settlement