r 081466

1
Tracking # 08-1466 ASME B31.8-2007 EDITION Errata for Figure I-4(c) PRESENT TEXT PROPOSED CHANGES RATIONALE In Appendix I, Figure 4(c), the sketch for the suggested end preparation for pipe and fittings over 7/8-in thickness, the callout for the pipe wall thickness of the land is shown as 1/6-in. ±1/32-in. This is incorrect. It should be 1/16-in ±1/32-in. This was incorrectly put into the Code when this sketch was originally published in the 1992 Edition of the Code. NOTES: (1) Underline and blue indicates revised and new text. (2) Strikethrough and red indicates deleted text (1/9/09) 1 / 16

description

klnjjnm,

Transcript of r 081466

Page 1: r 081466

Tracking # 08-1466

ASME B31.8-2007 EDITION Errata for Figure I-4(c)

PRESENT TEXT PROPOSED CHANGES

RATIONALE

In Appendix I, Figure 4(c), the sketch for the suggested end preparation for pipe and fittings over 7/8-in thickness, the callout for the pipe wall thickness of the land is shown as 1/6-in. ±1/32-in. This is incorrect. It should be 1/16-in ±1/32-in. This was incorrectly put into the Code when this sketch was originally published in the 1992 Edition of the Code.

NOTES: (1) Underline and blue indicates revised and new text. 1 of 1(2) Strikethrough and red indicates deleted text (1/9/09)

1 / 16 in.