QUICKCAB - TKC Ltd · WEB EMAIL SALESfiTKC.CO.UK Quickcab Carcases Dresser Unit • Height: 1210mm...

1 TEL 0161 336 3636FAX 0161 336 3638

WEB WWW.TKC.CO.UKEMAIL [email protected]

QUICKCABStandard & Vero carcases

Date of print/release

May

2018

Please Note: The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.

QUICKCAB

Technical Guide

IMPORTANT PLEASE NOTE:The information contained in this literature is for illustrative purposes only to assist in choosing your desired kitchen. While we endeavour to keep the information up to date and correct we do not make any representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability and suitability of the doors and products that appear in this literature.

We aim to showcase as many different items as possible and therefore some products have been installed and photographed purely to show as many of our product features as possible and they should not be taken as an example of how they are intended to be installed in real kitchen installations.

It is therefore the responsibility of the installer to check the corresponding manufacturer’s installation information and the manufacturer’s technical information to ensure this is up to date and to ensure that the products can be fitted in a way they are displayed and the products are suitable for your requirements.

We specifically exclude any liability in this regard unless the products are fitted in accordance with the specifications we supply and the manufacturer’s installation recommendations are used in a way recommended by the manufacturer and in accordance with the manufacturer’s technical information provided.

The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product information available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.

We are proud that all our products that we sell are covered by a statutory warranty but this does not stop all our products naturally ageing overtime. As a result of this natural ageing process we are therefore unable to provide an identical colour finish to the existing products you have purchased from us with any products that we supply you from the same product line. In such event our liability will be limited to the purchase price paid for the product you are seeking to replace.

Due to the limitations on photographic reproduction, colours may differ slightly from the actual products shown. Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability.

3 TEL 0161 336 3636FAX 0161 336 3638


2mm PVC leading edgefor high impact resistance**

Variable shelf positionsfor end user convenience

(Metal shelf studs)

150mm Adjustable legs to compensate for uneven floors

100mm cross rail for improved practicality

Cam and dowel technology for robust construction

18mm solid back panelfor added rigidity

18mm MFC Carcase Pre drilled drawer holes fordrawerline, 2 & 3 multidrawer

SPECIFICATIONS

Quickcab Carcases View Quickcab video here:www.tkc.co.uk/quickcab_video

of kitchen cabinet build time*SAVE 75%*Based on 7 1/2 minute standard cabinet build time vs 2 minutes build time for Quickcab.

2:00 mins

Build time

Please Note: All carcases are supplied without drawers.

Gables marked for hinges, 100mm centres.** Quickcab units will have a 2mm leading edge on shelves, except for radius units and curved corner wall and base units, where the radius does not allow this edging to be used. For these items the edging will be 0.8mm ABS tape. All other exposed leading edges will be a 0.4mm melamine edge.

4 TEL 0161 336 3636FAX 0161 336 3638


Wall UnitsBase & Tall Units

BASE & TALL UNIT SIZES HEIGHT BACK (solid MFC)

Standard Base Unit 720mm 18mm

Dresser Unit 1210mm 8mm

Larder and Appliance Units 1970mm 8mm

Extra Tall Larder and Appl. Units 2150mm 8mm

WALL UNIT SIZES HEIGHT BACK (solid MFC)

Bridging Unit 360mm 8mm

Standard Wall Unit 720mm 8mm

Tall Wall Unit 900mm 8mm

Feet supplied adjustable:

Completed Quickcab base unit:

Completed Quickcab wall unit:Pack contents:

Cam & dowel already in place:

Simple screwdriver fixing:

Simply push panels in position and lock in place with screwdriver.

Available in 4 colours

Ivory White OakStone Grey

Ivory: Egger U104Stone Grey: Egger U727White: Egger W980Natural Lancaster Oak: Egger H3368

When ordering please replace XXX with the prefix code below: Ivory: 183Stone Grey: 87White: 184Oak: 186

Board Colours Prefix Codes

NB: Centre posts are MFCNB: Centre posts are MFC


560mm

501mm (base unit)

519mm (tall unit)

18mm

41mm void (base unit only)

150mm(adjustable)

300mm

272mm

Supplied with concealed hangersand plates

18mm

5 TEL 0161 336 3636FAX 0161 336 3638


Quickcab Carcases

Single Base Unit

• Height: 720mm • Supplied with an 18mm back• Sold as a base cabinet only• Drawerline, 2 and 3 drawer unit options possible• Drawer packs purchased seperately

(nb. 350mm & 450mm boxed drawer packs not available)

CODE DESCRIPTION

XXXBASE150 Base unit 150mm







Built Under Oven Unit

• Height: 720mm• Open back

CODE DESCRIPTION

XXXUOH600 Under oven housing 600mm

Double Base Unit

• Height: 720mm • Supplied with an 18mm back• Includes 1 shelf • Can be converted to a 2 and 3 drawer unit• Sold as a base cabinet only• Drawer packs purchased separately• Converted to corner base using a blanking panel

CODE DESCRIPTION





XXXBLANKPANEL Base blanking panel 720 x 500mm

View Quickcab video here:www.tkc.co.uk/quickcab_video

6 TEL 0161 336 3636FAX 0161 336 3638


Carcase Stock Carcase DetailsQuickcab Carcases

Corner Base Unit

• Height: 720mm • Supplied with an 18mm back• Includes 1 shelf

CODE DESCRIPTION

XXXCBASE900 L corner base 900mm x 900mm

Internal Curved Corner Base Unit

• Height: 720mm • Supplied with an 18mm back• Includes 1 shelf • To suit standard internal curved TKC doors

CODE DESCRIPTION

XXXINTBASE Internal curve base corner 900 x 900mm

External Curved Base Unit

• Height: 720mm • Supplied with an 18mm back• Includes 1 shelf • To suit external curved TKC doors • Legs not supplied with curved base unit

(legs can be purchased separatley)

CODE DESCRIPTION

XXXRADIUS Radius unit

XXXRADIUSCART Cartmel radius unit

183DENTONRADIUS Denton radius unit - ivory only

XXXBASE260 Base unit 260mm (300mm deep)*

* for use with radius unit


340

340

R243

Cartmelradius

Dentonradius

Standard TKC

radius

R168

R186

R243

Cartmelradius

Dentonradius

Standard TKC

radius

R168

R186

R243

Cartmelradius

Dentonradius

Standard TKC

radius

R168

R186

Opening sizes (incl. gable ends)

7 TEL 0161 336 3636FAX 0161 336 3638


Carcase Stock Carcase DetailsQuickcab Carcases

Appliance Unit / Extra Tall Appliance Unit

Fridge Freezer Unit Double Oven Housing Unit

• Height: 1970mm / 2150mm • Supplied with an 8mm back• Multi purpose unit• Supplied with gable ends and a shelf pack• Includes top and bottom, 3 fixed shelves

and 1 floating shelf

CODE DESCRIPTION

XXXTALL600 Appliance unit 600mm (1970mm tall)

XXXTTALL600 Extra tall appliance 600mm (2150mm tall)

Larder Unit

• Height: 1970mm• Supplied with an 8mm back• Includes top and bottom, 3 fixed shelves


CODE DESCRIPTION

XXXLARDER300 Larder 300mm




Extra Tall Larder Unit

• Height: 2150mm • Supplied with an 8mm back • Includes top and bottom, 3 fixed shelves


CODE DESCRIPTION

XXXTLARDER300 Extra tall larder 300mm

XXXTLARDER400 Extra tall larder 400mm

XXXTLARDER500 Extra tall larder 500mmPlease note: For Extra tall larder 600mm use Extra Tall Appliance Unit (code: XXXTTALL600)


8 TEL 0161 336 3636FAX 0161 336 3638


Quickcab Carcases

Dresser Unit

• Height: 1210mm • 2 drawer dresser unit (nb. this unit cannot be

used for 1 drawer configurations) • Drawers sold separately• Supplied with an 8mm back• Includes 1 shelf

CODE DESCRIPTION

XXXDRESS500 Dresser 500mm (1210mm tall)

XXXDRESS600 Dresser 600mm (1210mm tall)

1970mm External Curved Unit

• Height: 1970mm • Supplied with an 18mm back• Includes 5 shelves • Use with 1 x 1245mm & 1 x 720mm tall

external curved TKC doors

CODE DESCRIPTION

XXXETRADIUS 1970mm tall radius unit

XXXETRADIUSCART 1970mm tall Cartmel radius unit

XXXETBASE260 1970mm tall 260mm base unit*

* for use with 1970mm tall radius unit

Single Wall Unit

• Height: 720mm• Supplied with an 8mm back• Includes 2 shelves

CODE DESCRIPTION

XXXWALL300 Wall unit 300mm







R243

Cartmelradius

Dentonradius

Standard TKC

radius

R168

R186

R243

Cartmelradius

Dentonradius

Standard TKC

radius

R168

R186

1970

mm

tall

radi

us u

nit

1970

mm

tall

260m

m b

ase

unit

9 TEL 0161 336 3636FAX 0161 336 3638


Double Wall Unit

• Height: 720mm• Supplied with an 8mm back• Includes 2 shelves & centrepost

CODE DESCRIPTION





L Shaped Corner Wall Unit

• Height: 720mm • Supplied with an 8mm back• Includes 2 shelves

CODE DESCRIPTION

XXXCWALL600 L corner wall 600 x 600mm

Splay Corner Wall Unit / Tall Splay Corner Wall Unit

• Height: 720mm / 900mm• Supplied with an 8mm back• Includes 2 shelves

CODE DESCRIPTION

XXXDWALL600 Splay corner wall unit 600 x 600mm (720mm tall)

XXXTDWALL600 Tall splay corner wall unit 600 x 600mm (900mm tall)


300

300


Suitable for a 396mm (w) door

10 TEL 0161 336 3636FAX 0161 336 3638


Internal Curved Corner Wall Unit

• Height: 720mm• Supplied with an 8mm back• Includes 2 shelves • To suit standard internal curved TKC doors

CODE DESCRIPTION

XXXINTWALL Internal curved wall corner 600 x 600mm

Single Bridging Unit

• Height: 360mm • Supplied with an 8mm back

CODE DESCRIPTION

XXXBRIDGE500 Bridging unit 500mm


Double Bridging Unit

• Height: 360mm• Supplied with an 8mm back

CODE DESCRIPTION





11 TEL 0161 336 3636FAX 0161 336 3638


External Curved Wall Unit / Tall External Curved Wall Unit

• Height: 720mm / 900mm• Supplied with an 8mm back• Includes 1 shelf (720mm) / 2 shelves (900mm)• To suit external curved TKC doors

CODE DESCRIPTION

XXXRADIUS Radius unit (720mm tall)

XXXRADIUSCART Cartmel radius unit (720mm tall)

183DENTONRADIUS Denton radius unit (720mm tall) - ivory only

XXXTRADIUS Tall radius unit (900mm tall)

XXXTRADIUSCART Cartmel tall radius unit (900mm tall)

Tall Single Wall Unit

• Height: 900mm • Supplied with an 8mm back• Includes 2 shelves

CODE DESCRIPTION

XXXTWALL300 Tall wall unit 300mm





Tall Double Wall Unit

• Height: 900mm • Supplied with an 8mm back• Includes 2 shelves & centrepost

CODE DESCRIPTION





R243

Cartmelradius

Dentonradius

Standard TKC

radius

R168

R186

R243

Cartmelradius

Dentonradius

Standard TKC

radius

R168

R186

R243

Cartmelradius

Dentonradius

Standard TKC

radius

R168

R186

12 TEL 0161 336 3636FAX 0161 336 3638



Belfast Base Unit (for use with Belfast sink)

• Height: 455mm / 495mm• Width: 600mm• Supplied with an 18mm back• 455mm unit for use with 450 x 596mm door• 495mm unit for use with 490 x 596mm door

CODE DESCRIPTION

XXXBELFAST455 Belfast base unit, 455mm tall

XXXBELFAST495 Belfast base unit, 495mm tall

SMARTLARDER Complete

• Height: 1970mm• Includes 1 fixed shelf & 5 ready to install drawers• Soft closing drawers• Dynamic load capacity: 40kg/drawer• Cabinet finish: Available in all 4 Quickcab colours -

Stone Grey, Oak, White & Ivory• Drawer finish: Grey

Pack Contents:

• 1 x Larder Unit, 1970mm high• 1 x Topslide shallow boxed drawer, 83mm• 1 x Topslide internal bracket, 83mm• 4 x Topslide boxed pan drawers, 224mm• 4 x Topslide internal brackets, 224mm• 4 x Glass conversion kits• 3 x Topslide internal fascia panels, 1100mm length• 2 x Topslide front rails, 1100mm length• 4 x Silence 165 degree soft close hinges• 4 x Silence Euro hinge plates 18mm

Fascia panel cutting dimensions:Internal cabinet width - 97mm Front rail cutting dimensions:Internal cabinet width - 63mm

CODE DESCRIPTION

XXXSL50G SMARTLARDER complete unit 500mm

XXXSL60G SMARTLARDER complete unit 600mm

13 TEL 0161 336 3636FAX 0161 336 3638


Quickcab Carcases

Corner Base Unit Details

1000mm base unit with a 500mm blanking panel. For use with a 446mm (w) door.






NOTE:Blanking panel can be cut to size







14 TEL 0161 336 3636FAX 0161 336 3638


Quickcab Carcases

Corner Base Unit Details

Corner Wall Unit Details


Corner base unit, 900 x 900mm.For use with 2 x 715mm (h) x 313mm (w) doors. Use 170 degree and pie cut hinges when connecting the doors.

L shaped corner wall unit, 600 x 600mm. For use with 2 x 715mm (h) x 273/277mm (w) doors.Use 170 degree and pie cut hinges when connecting the doors.

Splay corner wall unit, 600 x 600mm.For use with a 715mm (h) x 396mm (h) door.Use 45 degree hinges.



15 TEL 0161 336 3636FAX 0161 336 3638


Quickcab Carcases

External Curved Wall / Base Unit Details

Product Information

Radius carcase to be used with standard TKC external curved doors.For use on a wall or as a feature base.

Carcase heights available: 720 / 900 / 1970mm

720mm CODE: XXXRADIUS900mm CODE: XXXTRADIUS1970mm CODE: XXXETRADIUS


260mm Base Unit Details

Product Information

260mm base carcase for use behind radius unit on the end of a kitchen run.

Carcase heights available: 720mm / 1970mm

720mm CODE: XXXBASE2601970mm CODE: XXXETBASE260

720mm unit for use with 715 x 256mm door.1970mm unit for use with 1245 x 256mm door and 715mm x 256mm door.

Double External Curved Wall / Base Unit Details

Product Information

2 x carcases to be used together with two curved doors.

Carcase height: 720 / 900 / 1970mm

For use on an island unit or on the wall.

720mm CODE: XXXRADIUS900mm CODE: XXXTRADIUS1970mm CODE: XXXETRADIUS

16 TEL 0161 336 3636FAX 0161 336 3638



Denton External Curved Wall / Base Unit Details

Cartmel External Curved Wall / Base Unit Details

Product Information

Radius carcase to be used with Denton external curved doors ONLY.For use on a wall or as a feature base.

Carcase height: 720mm

CODE: 183DENTONRADIUS

Product Information

Radius carcase to be used with Cartmel external curved doors ONLY.For use on a wall or as a feature base.

Carcase heights available: 720 / 900 / 1970mm

720mm CODE: XXXRADIUSCART900mm CODE: XXXTRADIUSCART1970mm CODE: XXXETRADIUSCART

17 TEL 0161 336 3636FAX 0161 336 3638



Internal Curved Corner Base Unit Details

Product Information

For use as a standard base 900 x 900 corner.

To be used with internal curved base doors.

Carcase height: 720mmIncludes 1 shelf and carcase legs.

Use 170 degree hinges with the doors.

CODE: XXXINTBASE

Internal Curved Corner Wall Unit Details

Product Information

For use as a standard wall 600 x 600 corner.

To be used with internal curved wall doors

Carcase height: 720mmIncludes 2 shelves.

Use 170 degree hinges with the doors.

CODE: XXXINTWALL

18 TEL 0161 336 3636FAX 0161 336 3638


Vero Quickcab Carcases View Vero Quickcab videos here:www.tkc.co.uk/vero-made-easy

for Vero handleless rail system

QUICKCAB

Prefix code: 383 Prefix code: 387 Prefix code: 384

Board Colour: Egger U104

IVORY

Please Note: The colour prefix codes for Vero Quickcab are different to the codes used for standard Quickcab carcases.

STONE GREY WHITE

Board Colour: Egger U727 Board Colour: Egger W980

of kitchen cabinet build time*SAVE 75%*Based on 7 1/2 minute standard cabinet build time vs 2 minutes build time for Quickcab.

2:00 mins

Build time

Available on a 10-15 working day lead time.

19 TEL 0161 336 3636FAX 0161 336 3638


Vero Base Unit

Vero Larder & Appliance Units

Vero 2/3 Drawer Unit Vero Wall Unit

Vero Quickcab Carcases

560mm

• Top section pre-routered for Vero profiles• Pre-drilled holes for quick fix brackets

501mm

150mm(adjustable)

41mm service void

• Top and mid sections pre-routered for Vero profiles

• Pre-drilled holes for quick fix brackets

560mm

501mm

150mm(adjustable)

41mm service void

• Base panel set back 20mm & groove routered for Vero profile

300mm

272mm

20mm

'Single gable' unit 'Double gable' unit

• Cabinet gable set back 20mm on one side for Vero profile

• Cabinet gables set back 20mm on both sides for two Vero profiles

560mm560mm

519mm519mm

150mm(adjustable)

150mm(adjustable)

20mm

20mm

20mm

Additional Vero Cabinet Features

BASE, LARDER & APPLIANCE UNIT SIZES HEIGHT BACK

(solid MFC)

Standard Base Unit 720mm 18mm

Larder & Appliance Units 1970mm 8mm

Extra Tall Larder & Appliance Units 2150mm 8mm

WALL UNIT SIZES HEIGHT BACK (solid MFC)

Bridging Unit 360mm 8mm

Standard Wall Unit 720mm 8mm

Tall Wall Unit 900mm 8mm

• Gables marked for hinges, 100mm centres

• Silence hinges included with all cabinets

• All carcases have 2mm PVC leading edge

• Pre-drilled holes for drawer runners on 2/3 drawer units

• Wall units supplied with concealed hangers and plates

View Vero Quickcab videos here:www.tkc.co.uk/vero-made-easy

20 TEL 0161 336 3636FAX 0161 336 3638



Vero Single Base Unit

• Height: 720mm • Supplied with an 18mm back• Top section pre-routered to accommodate

Vero top profile• Pre-drilled holes for quick fix brackets

CODE DESCRIPTION

XXXVBASE150 Vero base unit 150mm







Vero Built Under Oven Unit

• Height: 720mm• Same design as standard Quickcab under oven

housing unit

CODE DESCRIPTION

XXXVUOH600 Vero under oven housing 600mm

Vero Double Base Unit

• Height: 720mm • Supplied with an 18mm back• Includes 1 shelf & a centre post• Top section pre-routered to accommodate

Vero top profile• Pre-drilled holes for quick fix brackets• Converted to corner base using a blanking panel

CODE DESCRIPTION





XXXVBLANK Vero base blanking panel 720 x 500mm


21 TEL 0161 336 3636FAX 0161 336 3638


Vero L Shaped Corner Base Unit

• Height: 720mm • Supplied with an 18mm back• Includes 1 shelf • Top section pre-routered to

accommodate Vero top profile.• Pre-drilled holes for quick fix brackets

CODE DESCRIPTION

XXXVCBASE900 Vero L shaped corner base 900 x 900mm

Vero 2/3 Drawer Single Base Unit

• Height: 720mm • Supplied with an 18mm back• Top and mid sections pre-routered to

accommodate Vero top and mid profiles • Suitable for 2 and 3 drawers• Drawer packs purchased separatley • Pre-drilled holes for quick fix brackets

CODE DESCRIPTION

XXXVDBASE500 Vero 2/3 drawer base unit 500mm


Vero 2/3 Drawer Double Base Unit

• Height: 720mm • Supplied with an 18mm back• Top and mid sections pre-routered to

accommodate Vero top and mid profiles • Suitable for 2 and 3 drawers • Drawer packs purchased separatley• Pre-drilled holes for quick fix brackets

CODE DESCRIPTION





340

340



22 TEL 0161 336 3636FAX 0161 336 3638



Vero Single Wall Unit

• Height: 720mm • Supplied with an 8mm back• Includes 2 shelves• Base panel set back with 20mm and groove

routered to accommodate Vero wall profile

CODE DESCRIPTION

XXXVWALL300 Vero wall unit 300mm






Vero Double Wall Unit


routered to accommodate Vero wall profile• Supplied with centrepost and L bracket to secure

centre post into Vero wall profile

CODE DESCRIPTION





Vero Tall Single Wall Unit



CODE DESCRIPTION

XXXVTWALL300 Vero tall wall unit 300mm





23 TEL 0161 336 3636FAX 0161 336 3638



Vero Tall Double Wall Unit


routered to accommodate Vero wall profile• Supplied with centrepost and L bracket to secure

centre post onto Vero wall profile

CODE DESCRIPTION




Vero L Shaped Corner Wall Unit

• Height: 720mm • Supplied with an 8mm back• Includes 2 shelves• Base panel set back with 20mm and

groove routered to accommodate Vero wall profile

CODE DESCRIPTION

XXXVCWALL600 Vero L corner wall 600 x 600mm

Vero Splay Corner Wall Unit



CODE DESCRIPTION

XXXVDWALL600 Vero splay corner wall 600 x 600mm

300

300



24 TEL 0161 336 3636FAX 0161 336 3638



Vero Tall Splay Corner Wall Unit



CODE DESCRIPTION

XXXVTDWALL600 Vero tall splay corner wall 600 x 600mm

Vero Single Bridging Unit

• Height: 360mm • Supplied with an 8mm back• Base panel set back with 20mm and groove


CODE DESCRIPTION

XXXVBRIDGE500 Vero bridging unit 500mm


Vero Double Bridging Unit

• Height: 360mm • Supplied with an 8mm back• Base panel set back with 20mm and groove


CODE DESCRIPTION





25 TEL 0161 336 3636FAX 0161 336 3638



Vero Larder / Appliance Ends - Single Gable

• Height: 1970mm• Includes two 18mm ends and one 8mm back• Shelf pack not included and needs to be purchased

separately.• Front of cabinet set back by 20mm on one side to

accommodate intermediate or lateral vertical Vero profiles.

• Universal design, can be used for either right hand or left hand units.

• Please note, a 35mm space in between two larder units is required to mantain the void created by the vertical profile trim.

CODE DESCRIPTION

XXXVTALLEND300S Vero larder ends & back - single gable 300mm



XXXVTALLEND600S Vero larder/appliance ends & back - single gable 600mm

Vero Extra Tall Larder / Appliance Ends - Single Gable


separately.• Front of cabinet set back by 20mm on one side to

accommodate intermediate or lateral vertical Vero profiles.

• Universal design, can be used for either right hand or left hand units.


CODE DESCRIPTION

XXXVTTALLEND300S Vero extra tall larder ends & back - single gable 300mm



XXXVTTALLEND600S Vero extra tall larder/appliance ends & back - single gable 600mm

One side set back 20mm

One side set back 20mm

26 TEL 0161 336 3636FAX 0161 336 3638



Vero Larder / Appliance Ends - Double Gable


separately.• Front of cabinet set back by 20mm on both sides

to accommodate intermediate vertical Vero profiles on both sides, for a symmetrical look when using 3 larders or more.


CODE DESCRIPTION

XXXVTALLEND300D Vero larder ends & back - double gable 300mm



XXXVTALLEND600D Vero larder/appliance ends & back - double gable 600mm

Vero Extra Tall Larder / Appliance Ends - Double Gable


separately.• Front of cabinet set back by 20mm on both sides to

accommodate intermediate vertical Vero profiles on both sides, for a symmetrical look when using 3 larders or more.


CODE DESCRIPTION

XXXVTTALLEND300D Vero extra tall larder ends & back - double gable 300mm



XXXVTTALLEND600D Vero extra tall larder/appliance ends & back - double gable 600mm

Set back 20mm

Set back 20mm

Set back 20mm

Set back 20mm

27 TEL 0161 336 3636FAX 0161 336 3638



Shelf Pack for Vero Larder / Appliance Unit

• Includes 6 shelves: 1 x top shelf, 1 x bottom shelf, 3 x fixed shelves & 1 x floating shelf.

• Shelf packs are required in addition to the Vero larder / appliance ends & backs in order to create a complete Vero larder or appliance unit.

CODE DESCRIPTION

XXXVTALL300SP Shelf pack for Vero larder unit 300mm



XXXVTALL600SP Shelf pack for Vero larder/appliance unit 600mm

28 TEL 0161 336 3636FAX 0161 336 3638



Vero Corner Base Details

1000mm Vero base unit with a 500mm blanking panel. For use with a 446mm (w) door.












29 TEL 0161 336 3636FAX 0161 336 3638



Vero Corner Base Unit Details

Vero Corner Wall Unit Details


Vero corner base unit, 900 x 900mm.For use with 2 x 715mm (h) x 313mm (w) doors. Use 170 degree and pie cut hinges when connecting the doors.

Vero L shaped corner wall unit, 600 x 600mm. For use with 2 x 715mm (h) x 273/277mm (w) doors.Use 170 degree and pie cut hinges when connecting the doors.

Vero splay corner wall unit, 600 x 600mm.For use with a 715mm (h) x 396mm (w) door.Use 45 degree hinges.


30 TEL 0161 336 3636FAX 0161 336 3638


Contact usTelephone 0161 336 3636Fax 0161 336 3638Email [email protected] www.tkc.co.uk

AddressUnit 3Cranberry DriveDentonManchesterM34 3UL

Area Sales

Scotland 07770 017422North East 07766 021114Yorkshire 07976 643485North West 07584 241838Merseyside & North Wales 07458 119098East Midlands 07770 017440West Midlands 07899 948786South West & South Wales 07458 119099London & Home Counties (North) 07823 442668London & Home Counties (South) 07792 078830Northern Ireland 07391 405286

All goods are sold subject to our Terms and Conditions of Sale which are available upon request.

QUICKCAB - TKC Ltd · WEB EMAIL SALESfiTKC.CO.UK Quickcab Carcases Dresser Unit • Height: 1210mm...

Documents

Transcript of QUICKCAB - TKC Ltd · WEB EMAIL SALESfiTKC.CO.UK Quickcab Carcases Dresser Unit • Height: 1210mm...