Quick Start Guide - Diversity Optimizer LiTE

WHEN QUALITY MATTERS

Diversity Optimizer LiTE R11

Quick Start Guide

May 2011

SwissQual® License AG Allmendweg 8 CH-4528 Zuchwil Switzerland

t +41 32 686 65 65 f +41 32 686 65 66 e [email protected]

www.swissqual.com

Part Number: 15-070- 200749-3

SwissQual has made every effort to ensure that eventual instructions contained in the document are adequate and free of errors and omissions. SwissQual will, if necessary, explain issues which may not be covered by the documents. SwissQual’s liability for any errors in the documents is limited to the correction of errors and the aforementioned advisory services.

Copyright 2000 - 2011 SwissQual AG. All rights reserved.

No part of this publication may be copied, distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language without the prior written permission of SwissQual AG.

Confidential materials.

All information in this document is regarded as commercial valuable, protected and privileged intellectual property, and is provided under the terms of existing Non-Disclosure Agreements or as commercial-in-confidence material.

When you refer to a SwissQual technology or product, you must acknowledge the respective text or logo trademark somewhere in your text.

SwissQual®, Seven.Five®, SQuad®, QualiPoc®, NetQual®, VQuad®, Diversity® as well as the following logos are registered trademarks of SwissQual AG.

Diversity Explorer™, Diversity Ranger™, Diversity Unattended™, NiNA+™, NiNA™, NQAgent™, NQComm™, NQDI™, NQTM™, NQView™, NQWeb™, QPControl™, QPView™, QualiPoc Freerider™, QualiPoc iQ™, QualiPoc Mobile™, QualiPoc Static™, QualiWatch-M™, QualiWatch-S™, SystemInspector™, TestManager™, VMon™, VQuad-HD™ are trademarks of SwissQual AG.

SwissQual acknowledges the following trademarks for company names and products:

Adobe®, Adobe Acrobat®, and Adobe Postscript® are trademarks of Adobe Systems Incorporated.

Apple is a trademark of Apple Computer, Inc.

DIMENSION®, LATITUDE®, and OPTIPLEX® are registered trademarks of Dell Inc.

ELEKTROBIT® is a registered trademark of Elektrobit Group Plc.

Google® is a registered trademark of Google Inc.

Intel®, Intel Itanium®, Intel Pentium®, and Intel Xeon™ are trademarks or registered trademarks of Intel Corporation.

INTERNET EXPLORER®, SMARTPHONE®, TABLET® are registered trademarks of Microsoft Corporation.

Java™ is a U.S. trademark of Sun Microsystems, Inc.

Linux® is a registered trademark of Linus Torvalds.

Microsoft®, Microsoft Windows®, Microsoft Windows NT®, and Windows Vista® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries U.S.

NOKIA® is a registered trademark of Nokia Corporation.

Oracle® is a registered US trademark of Oracle Corporation, Redwood City, California.

SAMSUNG® is a registered trademark of Samsung Corporation.

SIERRA WIRELESS® is a registered trademark of Sierra Wireless, Inc.

TRIMBLE® is a registered trademark of Trimble Navigation Limited.

U-BLOX® is a registered trademark of u-blox Holding AG.

UNIX® is a registered trademark of The Open Group.

Diversity Optimizer LiTE R11 Quick Start Guide

© 2000 - 2011 SwissQual AG

Contents |

CONFIDENTIAL MATERIALS

ii

Contents

1 Introduction..................................................................................................................................... 4

What is in the Quick Start Manual? .................................................................................................. 4

2 Product Overview ............................................................................................................................ 5

Diversity Optimizer ........................................................................................................................... 5

Diversity Optimizer LiTE.................................................................................................................... 6

3 Installing Diversity Optimizer LiTE ................................................................................................... 7

System HW Requirements ................................................................................................................ 7

System SW Requirements ................................................................................................................ 7

Installation ....................................................................................................................................... 8

Installing Diversity Optimizer LiTE ............................................................................................... 8

Register and install your license .................................................................................................10

4 Using Diversity Optimizer LiTE ....................................................................................................... 14

Introduction Wizard ....................................................................................................................... 14

Next steps ...................................................................................................................................... 17

5 FAQ ................................................................................................................................................ 19

Figures

Figure 1-1 Diversity Optimizer LiTE ............................................................................................................... 4

Figure 3-1 Optimizer LiTE setup welcome page ............................................................................................ 9

Figure 3-2 Optimizer LiTE folder selection .................................................................................................... 9

Figure 3-3 Optimizer LiTE installation progress ............................................................................................. 9

Figure 3-4 Optimizer LiTE installation completed ........................................................................................10

Figure 3-5 NQView licensing .......................................................................................................................10

Figure 3-6 Optimizer LiTE registration information ......................................................................................11

Figure 3-7 SwissQual Optimizer LiTE registration service .............................................................................11

Figure 3-8 License registration confirmation ...............................................................................................12

Figure 3-9 Load license file ..........................................................................................................................12

Figure 3-10 License installation successful ..................................................................................................13



Contents |


iii

Figure 3-11 NQView restart notification ......................................................................................................13

Figure 4-1 NQView start screen...................................................................................................................14

Figure 4-2 Introduction Wizard - Start HW detection ..................................................................................15

Figure 4-3 Introduction Wizard - HW detection running ..............................................................................15

Figure 4-4 Introduction Wizard - HW detection finished and successful ......................................................16

Figure 4-5 Introduction Wizard - HW detection not successful ....................................................................16

Figure 4-6 Introduction Wizard – Create task ..............................................................................................16

Figure 4-7 Task editor .................................................................................................................................17

Figure 4-8 NQView Default workspace ........................................................................................................17

Figure 4-9 Live connect function .................................................................................................................18

Figure 4-10 Predefined pages selection .......................................................................................................18

Figure 4-11 Device panel, selected device ...................................................................................................18

Figure 4-12 Workspace toolbar ...................................................................................................................18

Figure 4-13 RF scanner configuration ..........................................................................................................19

Figure 4-14 Unit indicator – Status Ready – Update configuration needed ..................................................19



Chapter 1 | Introduction


4

1 Introduction

Thank you for choosing Diversity Optimizer LiTE R11, the free, newest, fastest, most user-friendly and

productive air interface optimization tool from SwissQual.

Figure 1-1 Diversity Optimizer LiTE

With Diversity Optimizer LiTE you will be able configure, execute and display speech and data testing

scenarios using your existing 2G, 3G and 4G test devices.

When you have registered to get the license to start up Diversity Optimizer LiTE, you are also invited to join

the user forum where you can get help, hints and tricks from SwissQual product experts and other users

around the world. You access the user forum at http://forums.swissqual.com.

The Diversity Optimizer LiTE R11 Quick Start Guide is designed to help you start up and view your test data

in as short a time as possible.

What is in the Quick Start Manual?

The Quick Start Manual describes all steps that you must work through before you are ready and can start

using Diversity Optimizer LiTE.

Many of the procedures described in this manual only have to be performed once, or when you are

exchanging connected test devices.

http://forums.swissqual.com/



Chapter 2 | Product Overview


5

2 Product Overview

Diversity Optimizer

Diversity Optimizer is an RF optimization tool designed for use on the road by field engineers, ready for 2G,

3G and 4G technologies, connecting to more than 100 handsets, data modems and RF scanners.

Designed to be as simple to use in the field as possible, and yet incorporating the latest analysis capabilities,

Diversity Optimizer is a full, professional RF optimization toolset that can be learned in minutes. The

Introduction wizard guides the user to configure the tool, automatically detect devices and start testing.

The highly efficient and customizable user interface is available for you to present more than 900

measurement values available for customized presentation in maps, line charts, bar charts, pie charts, list

boxes and tables.

Diversity Optimizer includes MapInfo MapX® map plotting. With BTS lists loaded into the tool the map

monitor will present serving and neighbor BTS sectors. It’s possible to save and load the drive test paths in

MapInfo format.

With multiple map monitors and map layer offsetting, the analysis of multiple values becomes very easy.

For in-building positioning, Diversity Optimizer use indoor floor plan pictures as background for setting way

points when GPS is not available. The new innovative and easy in-building positioning feature use indoor

floor plan pictures, taken by for example the PC camera.

Diversity Optimizer support full logging and decoding of multiple protocol layers on all technologies

including 3GPP and 3GPP2 RF, L2, L3, TCP/IP/PPP, RTSP, WAP, SIP and more.

Specifically for optimization tasks, the tool supports static and dynamic real time forcing of technology,

frequency band, channel, cell barring and handover. The handover history and missing neighbor events are

logged and tasks can be configured with single, parallel or Multi-RAB/DTM execution.

It also has customizable alerting events, which can be defined on L1 values, L3 messages, Call markers and

other triggers.

Diversity Optimizer displays all data in real time during data collection and save it to measurement files.

The files can be post processed afterwards using multiple files replay. With the find function it’s simple to

find the points of interest like Dropped calls, Layer 3 messages etc.

A new intelligent measurement file search make it possible to find files from the archive based on criteria

like technology, operator, KPI thresholds and RF channel numbers. Diversity Optimizer also includes CSV,

Google Earth® and MapInfo® data export functionality.

The standard Diversity Optimizer product license includes the:

Call to any number test

Sets up a speech call connection to any number that automatically responds. This test enables the

possibility to measure call setup success rate, call drop rate, call completion rate, call setup time,

handover statistics, speech service coverage as well as certain additional service KPIs.



Chapter 2 | Product Overview


6

Data services standard

Sets up PS data connection to any access point name and measure success rate, drop rate,

completion rate. Includes FTP UL, FTP DL, HTTP Browser, HTTP Transfer GET/PUT and Ping testing

with corresponding KPIs.

Being a member of the SwissQual Diversity family, the tool can naturally be equipped with licenses to tests

and troubleshoot a wide range of services listed below:

Voice telephony: CS & VoIP Speech MOS (narrow and wideband), Noise Suppression, Echo, RTT

Data: Ping, FTP, UDP, HTTP

Browsing: WAP, HTTP

Messaging: SMS, MMS, E-mail

Video over IP: Video IP portals and YouTube with Full Reference and No Reference methods

3G Video telephony

SwissQual support a wide range of integrated algorithms for voice and video intrusive and non-intrusive

MOS assessments:

Speech Quality: ITU-T P.863/POLQA (Trial licensing scheme).

ITU-T P.862/P.862.1 (PESQ) for voice MOS.

SwissQual SQuad for intrusive voice (narrow & wideband), echo, noise suppression and RTT.

SwissQual NiNa+ for non-intrusive voice.

Video Quality: SwissQual VQuad and VMon for video and multimedia MOS assessments, also

featuring audio-visual synchronization assessment

Diversity Optimizer LiTE

Diversity Optimizer LiTE includes all the features of Diversity Optimizer presented above but has the

following limitations:

Extended service test options are not supported

Multi RAB/DTM execution is not supported

IP trace is not supported

File recording or replay is not supported

MapInfo MapX® is not included

Map monitor is not available

BTS list loading is not supported

Supports a dedicated set of devices

Data export is not possible

Please contact SwissQual at [email protected] if you like to upgrade Diversity Optimizer LiTE to a fully

featured Diversity Optimizer license.

mailto:[email protected]



Chapter 3 | Installing Diversity Optimizer LiTE


7

3 Installing Diversity Optimizer LiTE

System HW Requirements

Supported Operating Systems:

o Windows XP Professional (32 bit) Service Pack 3 (English)

o Windows 7 (32 bit)

Computer with Intel CoreDuo 1.6 GHz or faster processor

Minimum of 2 GB of RAM

Supported hard disk format: NTFS

System SW Requirements

Windows specific:

o Administrative user rights

o Locale set to English (United States) or the following global format settings have to be set

correctly

Decimal symbol: .

List separator: ,

To set the locale to English, open Regional and Language Options in Control Panel,

click the Regional Options tab, and select an English location in the drop-down box.

o Firewall Settings

You need to open up the ports for the Diversity software components.

The setup program will check the ports during its initialization and will inform you if

there are ports that need to be configured.

o Windows 7

Disable UAC (User account control) or run Diversity Optimizer LiTE setup and

application as administrator.

Right-click on application icon and choose “Run as administrator”.

o SQL Server installation

Diversity LiTE setup will install a SQL Server 2005 Express Edition SP4 instance





8

named DIVERSTIYOPT.

o Existing customer with Diversity SW installed on PC

You must first uninstall the existing Diversity version before starting the Optimizer

LiTE installation.

Please make copy of the SwissQual Application data directory if you later like to

downgrade to your current Diversity version.

Installation

Diversity Optimizer LiTE automatically installs the software needed to use the product. You can use the

following device types:

Mobile phones with special test FW or diagnostic capabilities

Data modems, e.g. PC cards, USB modems and embedded modules, with special test FW or

diagnostic capabilities

GPS device with NMEA 0183 Bluetooth or USB serial interface

RF Scanner

Before you start using Diversity Optimizer LiTE, you need to connect the devices to your computer.

SwissQual assumes that you already have the necessary device drivers installed on the PC.

Important: Bluetooth GPS is not handled by the automatic HW detection and needs to be configured manually.

For a complete list of supported devices in Diversity Optimizer LiTE, please consult the FAQ section on the

user forum.

Installing Diversity Optimizer LiTE

1. Download Optimizer LiTE setup package from http://optimizerlite.swissqual.com

2. Double-click DiversityOptimizerLiTE-11.exe

http://optimizerlite.swissqual.com/





9

Figure 3-1 Optimizer LiTE setup welcome page

3. Click Next. The software will be installed into the default Diversity program folder or into a folder you choose.

Figure 3-2 Optimizer LiTE folder selection

4. Click Next. The installation starts and the screen will show the progress.

Figure 3-3 Optimizer LiTE installation progress





10

5. When the installation has completed the screen will show the results.

Figure 3-4 Optimizer LiTE installation completed

6. Click Finish. NetQual NQView, the Optimizer LiTE user interface will now start up.

Register and install your license

On the first start-up of Diversity Optimizer LiTE, you need to register as user and receive a license key.

Important: Make sure the PC is connected to the Internet.

7. Click Register for Optimizer LiTE.

Figure 3-5 NQView licensing

8. Enter your name and a valid email address to which the license file will be sent. Click Register.





11

Figure 3-6 Optimizer LiTE registration information

9. Your default web browser will open and be automatically directed to SwissQual web service for Optimizer LiTE license registration.

Figure 3-7 SwissQual Optimizer LiTE registration service

10. Click Request a license.

Note: The PC name and HDD drive information that are sent to SwissQual are necessary elements to generate your Optimizer LiTE license key. This also means that you need to request a license for each PC you will use for Optimizer LiTE.





12

Figure 3-8 License registration confirmation

11. Your license request is confirmed and you can now close the web browser.

12. When you have received the license file in your email, please copy it to any place on your Optimizer LiTE PC. Click button Load license in NQView and select your license file.

Figure 3-9 Load license file

13. NQView will notify you that the license was successfully installed. Click OK.





13

Figure 3-10 License installation successful

14. NQView will now need to restart. Click OK.

Figure 3-11 NQView restart notification

15. NQView indicates that it is shutting down. Wait until it has finished.

Upgrade and uninstall

Upgrading Diversity Optimizer LiTE

When SwissQual has launched a new version of Optimizer LiTE, all registered users will be notified. You

download the new setup package from http://optimizerlite.swissqual.com and select the option Upgrade

when you run the setup executable.

Uninstalling Diversity Optimizer LiTE

To uninstall Diversity Optimizer LiTE, you run the setup executable of the version you have installed, select

the option Uninstall.

http://optimizerlite.swissqual.com/



Chapter 4 | Using Diversity Optimizer LiTE


14

4 Using Diversity Optimizer LiTE

Introduction Wizard

When NQView has loaded a valid license key it will start up Diversity Optimizer LiTE.

1. NQView will execute several pre-configuration actions necessary for the first start up.

Figure 4-1 NQView start screen

Note: The first start-up will take several minutes, this is normal. But the following ones will be much faster.

2. Next, you will see the Introduction Wizard and the Welcome page. The Wizard will guide you step-by-

step to get started with Diversity Optimizer LiTE. Each step has a page with information. The ! symbol

indicates that an action is needed, the √ symbol indicates that no action is necessary.

3. First step is the Hardware detection page. Make sure that your test devices are connected to the PC and that Windows has installed the necessary drivers. Click Start hardware detection.





15

Figure 4-2 Introduction Wizard - Start HW detection

4. NQView will show the status during the HW detection. In the background the Diversity software automatically detects the devices that are connected to the PC.

Figure 4-3 Introduction Wizard - HW detection running

5. When the hardware detection has finished it can either have detected your devices successfully or it has not been able to detect them.

a When the hardware detection has finished and if it was successful, a message will show the devices that were detected, and the button changes to Restart hardware detection. The Diversity Optimizer software and hardware have reached the Ready state and this is indicated by the Unit state in text and status color. Click Next.





16

Figure 4-4 Introduction Wizard - HW detection finished and successful

b When the hardware detection was not successful, there is a warning text. You should check that the devices are configured and recognized by Windows Device Manager before starting hardware detection again.

Figure 4-5 Introduction Wizard - HW detection not successful

6. The Create /start task page is the last step of the Introduction Wizard. Here you configure the Tasks, i.e. the Diversity Optimizer active testing actions. Click Create a task.

Figure 4-6 Introduction Wizard – Create task

7. In the Task editor window you configure all the standard Optimizer tasks. Select a device and a test and





17

enter the test parameters.

8. In this example, we define a task named Data - FTP where the Sierra Wireless AirCard device run a FTP Get test using a specific APN. Click OK.

Figure 4-7 Task editor

9. You have now configured Diversity Optimizer. You don’t need to use the Introduction Wizard at the next start-up so uncheck Show this dialog the next time you start up NQView Optimizer. Click Close to end the Introduction Wizard.

Next steps

10. NQView shows the Default workspace when it starts for the first time.

Figure 4-8 NQView Default workspace

11. The Device information and the Tasks monitors are displayed on Page1.

12. To start a task, click the Start task icon in the Task monitor. When the Diversity test engine has started the status will change to Running.

13. To stop a running task, click the Stop task icon .





18

14. You can always click the Tasks button to get back to the Task monitor.

15. To be able to see measurement data in real-time, NQView must be in Live mode. You switch modes, between Live and Idle, using the Live connect function that you find in the toolbar or in the Control menu.

Figure 4-9 Live connect function

16. In Live mode, the Device information monitor shows the devices status and overview test results. Double-click a device to see more details like technology and call and test statistics.

17. To build up your workspace in a quick and easy way, you should use the predefined Workspace pages.

18. Go to menu Presentation and click Open predefined pages. The function will load the selected pages for all connected devices.

Figure 4-10 Predefined pages selection

19. To add more pages into your workspace, right-click on a page tab and select Add.

20. The Device monitors include the full set of predefined monitors that present measurement data for the devices.

21. First select which phone or data device that shall be the value source of the monitor to display. Go to the the Device panel and click on the device button. It will change the background color to beige.

Figure 4-11 Device panel, selected device

22. Select Monitors in the Navigation panel. Load Device monitors for the selected device by double-clicking.

23. The Workspaces allow you to save and reuse the display presentation. Saved Workspaces are selected from a dropdown list in the toolbar.

Figure 4-12 Workspace toolbar

24. The Events will notify you about important events and network problems during the measurement. Predefined events are defined and listed in Events in the Navigation. Green color indicates that an



Chapter 5 | FAQ


19

event is active, red color that it is deactivated. You can activate/deactivate Events by right-clicking.

25. To enter the RF Scanning settings, use button to open up the System configuration – Hardware tree and select the Scanner device.

Figure 4-13 RF scanner configuration

26. The Scanner configuration settings will be displayed in the Workspace area. You define and add scans

by clicking on the button. Click Save when you are ready.

27. When a configuration change that affects the Hardware has been saved, the Navigation panel will indicate with a text message that the Unit needs to be updated; it will also be indicated as a circle-arrows symbol in the Unit indicator. The update action is a necessary step to commit the changes to the configuration database and apply them to the devices.

Figure 4-14 Unit indicator – Status Ready – Update configuration needed

28. To update the Unit, right-click on the Unit indicator and select Update configuration. The Unit will change its status during the configuration update, this is normal. When the Device panel indicates that the Unit and the Scanner device are back in Ready state, the new Scanner configuration has been applied.

29. The Scanner devices have dedicated monitors, divided into the technologies GSM, WCDMA, CDMA and LTE. You open and manage them in the same way as with the Device monitors.

30. Several of the phone and data devices supported by Diversity Optimizer LiTE can be forced. Nokia NTM test phones supports the full set of forcing capabilities including band and channel lock. To access the forcing menu, press Ctrl-Space.

31. When the GPS indicator in the Device panel is black it indicates that the system receives GPS signal and has valid position. To see the details of the GPS information, go to Navigation Info in the Navigation panel.

5 FAQ

If you have a question about Diversity Optimizer LiTE which is not answered in this manual, please consult

the FAQ section on the Diversity Optimizer LiTE user forum or post a new topic. You sign up when you first

enter the forum web site at http://forums.swissqual.com.

http://forums.swissqual.com/

Quick Start Guide - Diversity Optimizer LiTE

Documents

Transcript of Quick Start Guide - Diversity Optimizer LiTE