inf 1

Contact Us

AMP DISPLAY INC.

QUICK START GUIDE for DWIN C Series LCM

Thank you for choosing the DWIN UART LCD

Module. This quick start guide will show you how to

simply make a connection between a computer (PC) and

DWIN C series UART module. You can also refer to

our Development Guide and Software User Guide for

further details.

What is DGUS?

DGUS, which stands for: DWIN

Graphical User Software, is intelligent

GUI design software applicable to a

wide range of applications from factory

automation to diagnostics and therapy,

process control and point-of-sale

systems. DGUS offers Original

Equipment Manufacturers (OEM)

design engineers that ability to develop

product prototypes using color TFT

LCD panels, greater flexibility, faster

development and easier upgrading

capability without the complexity of

TFT timing signals or core algorithms.

Please note: this quick guide is only for the C series models. If you have a T series

model or an S series model, (For example T series: DMT80480T07_06WT, S series:

DMT80480S070_06WT) this quick start might not be suitable for you. Please contact AMP Display if you have an S or T series and need help setting up your display.

Required Items

In order to successfully make a connection between a computer and DWIN C series module, you will need the following items:

1. Male to male USB cable Because of the 5V power-up requirement of the C series module, the display can connect directly to a PC via a USB cable.

2. 10 pin flat cable

3. HDL662 (FCC to USB connecting board)

4. Molex 10 pin connector available for your MCU connection

5. 2GB DWIN SD Card 6. Optional: HDL661 or HDL663

Adad

Contact Us

AMP Display Inc. 9856 Sixth Street, Rancho Cucamonga, CA 91730

Tel: 909-980-1310 Fax: 909-980-1410 | Email: info@ampdisplay.com www.ampdisplay.com 2

AMP Display Inc.

Instructions

Step 1

Make sure that the SD card is formatted to FAT32, and the images are formatted to 24 bit BMP with numbering sequence from zero (for example: 00.bmp, 01.bmp, 02.bmp, etc.)

Note: Only kernel drivers that are K600+ can support DGUS. Please refer to DGUS Development Guide_V3.1.0 for more information regarding DGUS working principles. You can also obtain a copy of the DGUS software on the AMP Display website under the Download Center here (Please refer to the DGUS User Guide_V3.4.0 to guide you how to use DGUS software) Customers who are using Terminal Assistant V6.0, we have Quick Guide V1.0.0 to show you how to connect and some of the basic operations of DGUS with picture illustrations

Step 2

First connect the LCD module with HDL662 using 10pin flat cable, then connect HDL662 to PC with USB cable.

Assuming that your PC is turned on, your display module should light up and automatically begin the DWIN demo slide show, in order to reference how easy it is to use this product. For more information about this demo slide show, please contact AMP sales representatives.

We strongly recommend DWIN SD

cards to use along with DWIN LCM’s,

because DWIN SD cards are

specifically used for industrial

applications and is equipped with SLC

that allows you to read-and-write

10000 times as opposed to ordinary SD

cards that only allow you to read-and-

write 2000 times. Please note that the

LCM’s specification sheet should

indicate the SD card you will need:

Standard SD card or TF card with

adaptor sleeve. Please call or email your

AMP representative should you have

any questions.

Why choose DWIN

SD Cards?

How it Works: Communication

between controller and DWIN DGUS

There are only five simple commands used during DGUS operation for storage purposes with space from 0000H-6FFFH. User can write or read the data into *VP for data variable adjustment without directly controlling the display, while the display module will automatically recognize the corresponding variables that user want to display, based on the SP settings. For detailed commands, please refer to the Development Guide. 。

For example: Register Access Command 0x80 Use this to switch to the fifth image: AA 5A 04 80 03 00 05. AA 5A: User Defined Frame Header 04: Data length (four bytes sent from 0x80 in eg) 80: Command for accessing control register 03: Register Address(*VP) 00 05: Image ID. 2

SP: Stack Pointer is a storage address for file

descriptions where you can adjust such properties

like character color, size, pixels etc. Description

files can be downloaded from Flash drive and

stored in SP.

VP: Variable Pointer is an address of variables for data which will be displayed or input.

Contact Us

Adad

Contact Us

AMP Display Inc. 9856 Sixth Street, Rancho Cucamonga, CA 91730

Tel: 909-980-1310 Fax: 909-980-1410 | Email: info@ampdisplay.com www.ampdisplay.com 3

AMP Display Inc.

(Continued)

Step 3

Once you connected the USB to a PC, the PC will alert you to install a USB driver. Please go to http://ampdisplay.com/support.php to download XR21v1410 and start manual installation. Open Computer>Properties>Device Manager>Port, then right click to install and update the driver software option by browsing the folder of XR21v1410.

Though SD cards are capable of configuring the system file, some customers still need direct data communications for detecting commands that transferred between MCU and display, such as data availability of serial port, data checking by SSCOM32 etc. In order for data communication to take place, you have to install the driver XR21v1410 to operate HDL662. If you have the HDL663, you will need both CP2102 and XR21v1410 drivers.

Step 4

Step 4: The yellow sign in Device Manager will disappear and a dialog box will show up to notify you that you’ve successfully completed the installation.

Tips: Do not save the XR21v1410 folder to your desktop because there will not be an actual path for the OS to track. Also, make sure that you have installed the driver based on your OS type (x64 bit or x86bit)

AMP Display Inc. offers the

newest DWIN technology,

the one stop solution

(software and hardware

package) to your LCD

module needs. Please click

here for more information about

DWIN and the latest product

offerings.

If you have a problem, we got

the solution. With over 10

years of experience, AMP

Display’s team of engineers and

sales representatives are ready

to assist and provide you a

solution. Please call or email us

at any time. An AMP Display

representative will be able to

assist within 24 hours.