Questionnaire Troughed Belt Conveyor
description
Transcript of Questionnaire Troughed Belt Conveyor
-
Questionnaire for Troughed Conveyor Belts
Material handled
Designation
Temperature interval C
Max. lump size mm
Lump size distribution %
Bulk density kg/m
Chemically corrosive q yes q no
Mass flow t/h
Belt speed m/s
Center distance m
Section Lengths L0, L1, L2, L3, m
Lift H m
q uphill q downhill
Lift of Section Lengths H1, H2, H3, m
Min. Curve Radius
horizontal m
vertical, convex m
vertical, concave m
Max. Inclination in the Routing
Belt width mm
Troughing angle in top/bottom strand,
Idlers
Idler spacing in top / bottom strand m
Idler station type in top / bottom strand Top:
(1-, 2-, 3-, or 5-part) Bottom:
Idler diameter top / bottom strand mm
Belt length m
(with or without splice, pulleys and sag allowances?)
Required technical data
Take Up Configuration
(automatic / rigid / gravity at head / tail)
Belt Designation (if known)
q New belt q Replacement belt
Belt mass kg / m
Belt type (EP / St) & Rubber Grade
Belt top & bottom cover plate thickness mm:mm
Belt thickness mm
Motor power installed kW
Drive Configuration (with or without frequency converter or hydraulic clutch)
(Number of Drives at Head / Intermediate / Tail)
Starting / Braking time
Drive pulley - Diameter mm
Wrap angle head drive pulley
Tail pulley - Diameter mm
Wrap angle tail drive pulley
Rotating masses (if known) t
Local Transport Limits for Belt Reels
Lmax x Hmax x Bmax m
Max. Reel Weight t
Ambient Temperature Interval C
Chute Type (Feeding conditions)
(impact wall, rock box, grizzly fingers, hood-spoon)
Drop Height m
Conveyor Belt Group
ContiTech Transportbandsysteme GmbH Breslauer Str. 14 D - 37154 Northeim [email protected] /mining
Sketch or drawing of routing & conveyor system is desired
FeedCentre distance
Discharge
Drive headwith tension loop
L0L1
L2H2
L3L4L
H3H4 H
Designation: automatic/rigid/etc: Temperature interval: Belt Designation: Max: lump size: Inclination in Routing: Reel Weight:
Lump size distribution: Belt weight: Bulk density: Belt type / Rubber Grade: Belt top / bottom cover: Belt speed: Belt thickness: Center distance: Motor power installed: Section Length: Drive Configuration: Lift H: Nr: of Drives at Head, etc:
Starting/Breaking time: Lift of Section Length: Drive pulley: Wrap angle head pulley: horizontal: Tail pulley: vertical, convex: Wrap angle tail pulley: vertical, concave: Rotating masses: Belt width: L max x H max x B max: Troughing angle: Ambient Temperature Interval: Idler spacing: Top: Bottom: impact wall, rock box, etc: Idler diameter: Belt length: splice+sag allowances?: Mass flow: Chemically corrosive yes: Chemically corrosive no: uphill: downhill: new belt: replacement belt: drop height: