Question Excerpt

22
QUESTION EXCERPT

description

2321544

Transcript of Question Excerpt

Page 1: Question Excerpt

QUESTION EXCERPT

Page 2: Question Excerpt

1 . A L W A Y S E X A M I N E T H E T O O L F O R T A M A G E S B E F O R E U S E

A T R U E

B F A L C E

Page 3: Question Excerpt

2. It is OK to wear loose clothing, dangling objects and jewellery using hand tool.

A. True

B. False

Page 4: Question Excerpt

3. Keep cords and hoses away from heat, oil and sharp edges.

A. True

B. False

Page 5: Question Excerpt

4. Use only tools and equipment in good condition.

A. True

B. False

Page 6: Question Excerpt

5. It is OK to make adjustments or clear a jam while the power tool is running.

A. True

B. False

Page 7: Question Excerpt

6. If any tool breaks or malfunctions, report it to your supervisor immediately.

A. True

B. False

Page 8: Question Excerpt

7. Before connecting to a power source, make sure the power is on.

A. True

B. False

Page 9: Question Excerpt

8. Safety glasses shall always be worn whenever you are using power hand tool.

A. True

B. False

Page 10: Question Excerpt

9. There are several types of power tools, including electric, pneumatic, hydraulic.

A. True

B. False

Page 11: Question Excerpt

10. Never use electric tools in wet conditions.

A. True

B. False

Page 12: Question Excerpt

11. When not in use, power tools should be disconnected.

A. True

B. False

Page 13: Question Excerpt

12. Keep safe distance between your hands and all moving parts of the power tool.

A. True

B. False

Page 14: Question Excerpt

13. Don’t leave a power tool unattended while it is running.

A. True

B. False

Page 15: Question Excerpt

14. It is OK to startle someone who is using a power tool.

A. True

B. False

Page 16: Question Excerpt

15. Use safety guards exactly as they are supposed to be used.

A. True

B. False

Page 17: Question Excerpt

16. When tightening a nut with an adjustable wrench, always pull the wrench toward you; never push the wrench away from you.

A. True

B. False

Page 18: Question Excerpt

17. Plastic covered handles on wire-cutting pliers may be used to cut low-voltage live electrical wire.

A. True

B. False

Page 19: Question Excerpt

18. Screwdrivers may be used for purposes other than driving or removing screws, for example as a chisel.

A. Ture

B. False

Page 20: Question Excerpt

19. When selecting a standard screwdriver be certain that the tip is almost as thick and as wide as the slot of the head of a screw.

A. True

B. False

Page 21: Question Excerpt

20. When using a hacksaw, safety glasses must be worn.

A. True

B. False

Page 22: Question Excerpt

21. When you are finished using a hacksaw, tension should be eased.

A. True

B. False