QuantumX by HBM: Ready to measure...
description
Transcript of QuantumX by HBM: Ready to measure...
-
Thema, Kopfzeile rechts
Data acquisition system - universal and decentralized
Efficient, modular system concept
S233
3-6.
1 en
H
BM: p
ublic
-
Rubrik, Kopfzeile rechts
In mobile field testsThe trimaran Hydroptre is one of the fastest sailing boats in the world and achieves a
maximum speed of over 54 knots (100 km/h).
The whole Hydroptre team is consistently pushing the limits of technical feasibility. Materials and components need to deliver peak performance. We rely on HBM measu-
rement technology on board Hydroptre to ensure our future success. Only HBM is
able to provide the reliability and precision required for our tests.
Damien Colegrave, Engineer, LHydroptre
The multifunctional tool for your test and measurement tasksHBMs QuantumX high-performance data acquisition system is the perfect tool for many test and measurement tasks. Be it mobile or stationary load analysis, measurements on a test specimen in the laboratory or test bench, or mobile road and field tests - QuantumX adapts to your requirements.
Mobile data acquisition and field test Typical applications
Mobile or stationary load data acquisition Road test for chassis optimization (ride and handling), brake or acceptance tests
QuantumX benefits in mobile use
Modular system concept Universal inputs with maximum interference suppression for the acquisition of strain, force, displacement, acceleration, rotational speed, pressure, temperature, voltage and current
Synchronous signal acquisition of analog and digital inputs and bus signals
Connection to PC or standalone data recorder
Small and rugged (5 g vibration, 35 g shock), extended temperature range (-20 65C, 5 95 % rel. humidity)
Optimally matched catman software Synchronous storage of measurement signals, CANbus, telemetry, wheel force sensors (Kistler, A&D, MTS), position (GPS, Glonass) and video
Online computation of signals (algebra, strain gauges, counting, electric, etc.)
Smart triggers
High-performance screen visualization and operation
Multiple data formats: BIN, RPC III, nCode, MAT, DAT, ASCII
Reproducible automatic test sequences (sequencer, script)
Offline parameterization
2
-
Rubrik, Kopfzeile rechtsApplications and benefits
Measurement and analysis of test specimens in the laboratory or test benchTypical applications
Static and dynamic load and analysis and fatigue life investigation Function and performance test of components, assemblies, power train components or complete vehicles in the test bench
QuantumX benefits in stationary use
Integrable system concept Universal inputs with 24 bit resolution and sample rates of up to 100 kS/s
Real-time capability (algebra, matrix, PID control, limit values, torsional vibration analysis, signal generator)
Easy integration and outputs (10 V, EtherCAT, CAN, digital inputs and outputs)
Open software concept High data throughput up to 5 MS/s using catman
Driver package for programmers: LabVIEW, .NET, Linux
Innovative test bench conceptsAn innovative universal test bench by adt-Rinck (note: Internationale
Hydraulik-Akademie) for the first time also enables the complex inter-
action between electro-hydraulic components to be tested.
We have been using HBM measurement technology in our
national and international test benches for over 10 years and
have always had the best experiences with it. We have been
convinced by the products technical features, reliability and quality.
HBM just offers the right package.
Torsten Sigmund, Project Manager, adt-Rinck
3
-
Rubrik, Kopfzeile rechts
*Transducer Electronic Datasheet: The measurement modules identify transducers as soon as they are connected and automatically configure the channel.
A reliable measuring chain Dependable results require optimal matching of transducers, data acquisition system and software. HBM provides you with the complete measuring chain: connect visualize and save analyze.
Universal and fastQuantumX provides universal inputs and supports TEDS*, the standardized electronic data sheet in the sensor for automatic channel configuration.
Rugged and preciseAcquire strain, force, torque, pressure or displacement using precise sensors and transducers from HBM.
Integrate sensors or systems from other manufacturers.
Measuring modulesSensors and transducers
4
-
Rubrik, Kopfzeile rechtsA comprehensive solution - the complete measuring chain from HBM
Intuitive and fastStore data locally in the data recorder or PC. Operation is identical.
catman allows easy computation, visualization, storage and analysis of measured values and signals.
QuantumX also can be integrated into your own programs
LabVIEW .NET
Decentralized and integrableInstall your QuantumX modules at the measuring points and connect the modules in a decentrali-zed and synchronized network.
Integrate the measurement signals in real time and analyze them in parallel using PC software.
SoftwareMeasuring modules
5
-
Rubrik, Kopfzeile rechts
Professional and project-oriented: Data handling using catman
visualize - save - analyze
6
-
Rubrik, Kopfzeile rechtsMaximum usability, minimum effort
Professional and project-oriented: Data handling using catman
A single tool allows full parameterization of all channels, visualization and control of test and measurement tasks through to fundamental data analysis: catman. Work in a project-oriented way and describe your measuring equipment and task. The traceability of data is guaranteed, you always have an overview.
catman Professional software for data acquisition and processing
Easy integration of measuring devices Fast and reusable channel configuration (sensor data base, TEDS, CAN, dbc)
Easy adding of computed channels using formula editor Plug-ins for signal analysis of rotating mechanical shafts, combustion engines, electric propulsion systems and mechanical stress and fatigue life analyses
Smart triggers based on signal analysis Individual visualization and control on multiple pages, screens or full-screen (chart recorder, digital display, table, analog meter, function key, text, video, image, test track, etc.)
Signal visualization in the time, frequency or angular range Event monitoring and activities (limit value switches, email, logbook, etc.) Wide range of storage and export formats (catman BIN, Microsoft Excel, ASCII, MDF 3/4, National Instruments DIAdem, MathWorks MATLAB, RPC III, UFF58, )
Powerful data analysis (statistics, cutting, matching, etc.) Automation of sequences using predefined functions, VBA script or AutoSequence
Reporting (direct or using Microsoft Word, Excel)
7
-
Ethernet/FireWire
WLAN/LAN
Ethernet/FireWire
Rubrik, Kopfzeile rechts
Flexible concept, consistent quality Small or large numbers of channels? Connected to a PC or standalone with data recorder? Integrated real time? Stationary or mobile application? Centralized or distributed? QuantumX offers a solution in every case.
Every measuring task has different system requirements. What remains constant is that high measurement quality is essential.
The modules can be combined in an individual system that meets your requirements. This enables solutions for a wide range of applications to be implemented. Flexible, without any compromise. Versatile and dependable.
Operator level Configuration Visualization and control Automation Recording Analysis Presentation
Single device
Data recorder Configuration Visualization Recording Analysis
System level Sync via FireWire or Ethernet
8
-
Ethernet/FireWire
WLAN/LAN
Ethernet/FireWire
Rubrik, Kopfzeile rechtsThe right configuration for your measuring task
The benefits at a glance Acquires all common mechanical, electrical and thermal quantities
Freely scalable up to 10,000 channels Decentralized and synchronized Universal inputs with automatic channel para-meterization (TEDS)
High accuracy (24 bit AD, electrical isolation, AutoCal, 6/5/4-wire circuit, carrier frequency)
Up to 100 kS/s per channel, individual filters and scaling Real-time capability Standalone with data recorder Up to 5 million measured values per second using catman Calibration data saved to every measurement module
Interfaces to GPS, Glonass, IMUs Video cameras Wheel force sensors (Kistler, A&D, MTS)
Synchronous Ethernet PTPv2, FireWire, NTP, IRIG-B
Real time Real-time modules, analog outputs, EtherCAT
Scalable 1 to 10,000 channels
1 10,000
9
-
Rubrik, Kopfzeile rechtsDie Module im berblick
MX840B / MX440B MX410B MX460B
8-channel/4-channel universal amplifier 4-channel highly dynamic universal amplifier 4-channel highly dynamic universal amplifier
Sampling rate per channel: 40 kS/s Signal bandwidth: 7.2 kHz
Sampling rate per channel: 100 kS/s (200 kS/s, 2-chan.) Signal bandwidth: 40 kHz (80 kHz, 2-channel)
Sampling rate per channel: 100 kS/s Signal bandwidth: 40 kHz
Transducer technologies
SG half or full bridge (DC or TF with 4.8 kHz)
Current-fed piezoelectric transducers (IEPE / ICP)
Piezoresistive full bridge
Resistance thermometers (PT100, PT1000)
Thermocouples (Type K, N, R, S, T, B, E, J, C)
Ohmic resistor
Potentiometric transducers
Inductive half or full bridge, LVDT
Voltage (100 mV, 10 and 60 V)
Standardized current (20 mA)
Channel 5-8, in addition: Frequency, counter, rotary encoder (incremental with/without index), SSI
MX840B Channel 1, in addition: High speed CAN (ISO 11898, read 128 signals, transmit 7 channels)
Sensor supply: 5...24 V, 0.7 W (module: 2 W)
Transducer technologies
Strain gauge half or full bridge (DC, TF with 4.8 kHz)
Current-fed piezoelectric transducers (IEPE / ICP)
Piezoresistive full bridge
Inductive half or full bridge
Voltage (10 V)
Standardized current (20 mA)
Real time: RMS, PEAK
Scalable voltage output: BNC socket, 10 V, 16 bit
Sensor supply: 5...24 V, 0.7 W (module: 2 W)
Transducer technologies
Digital high-resolution frequency inputs (HBM torque flange, pulse counter)
Encoder/incremental encoder (digital, with/without index)
Pulse counter
Passive inductive rotational speed sensors (AC coupled)
Pulse-width modulated signals (PWM)
Real time: Rotational vibration analysis, RMS, PEAK
Sensor supply: 5...24 V, 0.7 W (module: 2 W)
Connector DSubHD 15 pole
AccessoriesThermocouples: 1-THERMO-MXBOARDSG quarter bridge: 1-SCM-SG120/35010 or 300 V CAT II: 1-SCM-HVBNC adapter: 1-SUBHD15-BNC
Connector DSubHD 15 pole BNC (voltage output)
AccessoriesSG quarter bridge: 1-SCM-SG120/35010 or 300 V CAT II: 1-SCM-HVBNC adapter: 1-SUBHD15-BNC
Connector DSubHD 15 pole
QuantumX: The facts QuantumX is the freely scalable measuring system from HBM. Get a quick overview of the modules flexibility.
10
-
Rubrik, Kopfzeile rechtsDie Module im berblick
MX403B MX1615B MX1601B
4-channel voltage module VDE tested safety
16-channel bridge amplifier 16-channel standard amplifier
Sampling rate per channel: 100 kS/s Signal bandwidth: 40 kHz
Sampling rate per channel: 20 kS/s Signal bandwidth: 3 kHz
Sampling rate per channel: 20 kS/s Signal bandwidth: 3 kHz
Transducer technologies
Voltage: 10, 100 and 1000 V
Differential, electrically isolated inputs
Isolation: 1000 V CAT II / 600 V CAT III
Real time: RMS, PEAK
Transducer technologies
SG full bridge
SG half bridge
SG quarter bridge with integrated 120 and 350 ohm completion resistors
Bridge excitation: DC or CF (1200 Hz)
Internal shunt resistor 100 kOhm)
Voltage (10 V)
Resistance thermometers (PT100)
Ohmic resistor
Potentiometric transducer (poti)
Transducer technologies
Current-fed piezoelectric transducers (IEPE / ICP)
Voltage (100 mV, 10 and 60 V)
Standardized current (20 mA)
Connector 4 mm safety lab socket
AccessoriesVirtual star: 1-G068-2BNC to laboratory connector: 1-G067-2Safety laboratory cable: 1-KAB282-1,5
Connector Phoenix Push-In (8 pole)
Accessories10 connectors: 1-CON-S1015
Connector Phoenix Push-In (8 pole)
Accessories10 connectors: 1-CON-S1015
Rubrik, Kopfzeile rechtsThe modules at a glance
11
-
Rubrik, Kopfzeile rechtsDie Module im berblick Rubrik, Kopfzeile rechts
MX1609KB / MX1609TB CX22-W CX27B
16-channel thermocouple amplifier Type K/T
Data recorder with catman EtherCAT / Ethernet Gateway
Sampling rate per channel: 300 S/s Signal bandwidth: 15 Hz
Transducer technologies
Thermocouple
Type K: MX1609KB
Type T: MX1609TB
Interfaces
Ethernet 2 x Ethernet TCP/IP (LAN and WLAN)
2 x FireWire
USB
3 x USB (keyboard, mouse, touch, GPS, etc.)
1 x DVI
3 x digital input
3 x digital output with status LED
1 x RS232 (GPS)
Interfaces
2 x EtherCAT
Ethernet 2 x Ethernet TCP/IP
2 x FireWire
2 x digital input
2 x digital output with status LED
1 x Sync Out (MGCplus)
Function: Connection of QuantumX amplifiers and modules
Standalone measurement or test mode after configuration
Configuration of measurement channels using sensor data base or TEDS
Online computation of channels
Trigger for Start and Stop
Data storage on exchangeable CF-CARD
Function: Connection of QuantumX amplifiers in real time
Connector Thermo mini (green/brown)
Accessories10 type K plugs: 1-THERMO-MINI10 type T plugs: 1-THERMO-MINI-T
Special features 8 GB CF-CARD and antenna included
Special features Distributed Clock
Variable Sync-Manager
1211
-
The modules at a glance
MX471B MX878B MX879B
4-channel CAN module 8-channel analog output 8-channel analog output 32-channel digital-I/O, multi-I/O module
Signal acquisition per channel: 128 Transmit measurement signals: 200
Output signals: max. 4.8 kS/s Generate signals: max. 96 kS/s
Output sgnals: max. 4.8 kS/sGenerate signals: max. 96 kS/s
Interfaces
CAN 2.0 A/B (ISO 11898, transmit / receive)
CCP, receive XCP-on-CAN
Software selectable internal bus termination
MX Assistant can generate DBC file
Functions and outputs
8 scalable voltage outputs ( 10 V, 16 Bit)
Real time: PID control, add, multiply, matrix calculation
Output of system signals
Functions and outputs
8 scalable voltage outputs ( 10 V, 16 bit)
Real time: limit value switch, PID control, add, multiply, matrix calculation
Output of system signals (direct analog or on bus)
32 x digital input or output (TTL, 24 V)
Connector 9-pin D-Sub (male)
Connector BNC
Connector Phoenix Push-In (8 pole)
Accessories 10 connectors: 1-CON-S1015
13
-
Thema, Kopfzeile rechts
S233
3-7.
0 en
H
BM: p
ublic
www.hbm
.com
HBM Test and MeasurementTel. +49 6151 803-0 Fax +49 6151 803-9100 [email protected]
13