Quality concepts manmohan10.2.10 fn&an
-
Upload
akhileshwar-maurya -
Category
Documents
-
view
984 -
download
0
description
Transcript of Quality concepts manmohan10.2.10 fn&an
![Page 1: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/1.jpg)
PRODUCTIVITY PYRAMID
Profit
Q C D
M M M M
Product Value Condition
Improvement of 3M
MURI, MURA, MUDA
Visual Management
5S
Production Element
![Page 2: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/2.jpg)
KIND OF CUSTOMERS• EMPLOYEES• EMPLOYEE ‘S FAMILY• RETIRED EMPLOYEES • VENDORS• SUPPLIERS• CONTRACTORS • SERVICE PROVIDERS• DEALERS • AGENTS• CONSUMERS
![Page 3: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/3.jpg)
KIND OF CUSTOMERS
• SHARE HOLDERS• PROMOTERS• STAKE HOLDERS• CENTRAL GOVT.• STATE GOVT.• LOCAL ADMINISTRATION• POLITICIANS• LEGISLATION• BANKS
![Page 4: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/4.jpg)
KIND OF CUSTOMERS
• FINANCIAL INSTITUTIONS• MEDIA• ENVIRONMENT• SOCIETY AT LARGE• COLLABORATERS• INDUSTRIAL ASSOCIATIONS / PROFESSIONAL
ASSOCIATIONS• CONSULTANTS• FRIENDS & COLLEAGUES IN SIMILAR BUSINESSES• FRIENDS & COLLEAGUES IN OTHER BUSINESSES
![Page 5: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/5.jpg)
5 S OVERVIEWCLEARING OR SORTING(SEIRI)
Meaning
Distinguish between the necessary and the unnecessary, and getting rid of what `you do
not need.
Aims
• Establish criteria and stick to them in eliminating the unnecessary.
• Practice stratification management to set priorities.
• Be able to deal with the causes of dirt
Activities
• Eliminating the unnecessary.
• Dealing with the causes of dirt.
• Kaizen and standardization based on fundamentals.
Principles
• Stratification management and dealing with the causes.
![Page 6: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/6.jpg)
Means… Segregate Necessary From Unnecessary Using The Following Table
FREQUENCY OF USE (PERIOD OF QUEUEING)
GROUPING (CATEGORY)
METHOD OF DISPOSAL
Used Less Than Once In A Year Not Used Throw Away
Used About Once Every Six Months To a Year
Used Infrequently Store In A Distant Spot
Used About Once A Week Used Once A Day Used All The Times
Used About Once In Two To Six Months Used About Once a Month
Keep Handy Keep Nearby
Keep Identifiable
Organize And Keep In Work Place
Used Sometimes
Used Often
![Page 7: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/7.jpg)
Meaning
• Establish a neat layout so you can always get just as much of what you need when you need it.
Aims
• A neat looking workplace.
• Efficient ( including quality and safety) layout and placement.
• Raising productivity by eliminating the waste of looking for things.
Activities
• Functional storage based upon the 5W’s and the 1H.
• Allocate place for each and every item.
• Arrange visuals to identify items and locations
• Establish easy replacement methodsPrinciples• Functional storage and eliminating the need to look for things.
ORGANISING ( SEITON)
![Page 8: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/8.jpg)
Meaning
• Eliminating trash, dirt, and foreign matter for a cleaner workplace.
• Cleaning as a form of inspection.
Aims
• A degree of cleanliness corresponding to your needs. Achieving zero grime and zero dirt
• Finding minor problems with cleaning inspections.
• Understanding that cleaning is inspecting.
Activities
• Establishing standard cleaning Procedures
• Arranging cleaning tools for each and every place
• Preventing the dirt at the source itself.
• Inspecting equipment and remedial action.
Principles
• Cleaning is for inspection, elimination of breakdown and defects
CLEANING (SEISO)
![Page 9: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/9.jpg)
Meaning
• Keeping things organized, neat, and clean, even in personal and pollution related aspects.
Aims
• Management standards for maintaining the 5S’s.
• Innovative visible management so that abnormalities show up.
Activities
• Innovative visual controls.
• Early detection and early action devices.
• Manuals for maintaining standardization.
• Color Coding.
Principles
• Visual management and 5S standardization
STANDARDIZATION ( SEIKETSU)
![Page 10: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/10.jpg)
Meaning
• Doing the right thing as a matter of course.
Aims
• Full participation in developing good habits and follow the rules.
• Communication and feedback as daily routine.
Activities
• Five- minute 5S.
• Communication and Feedback.
• Individual responsibility.
• Practicing good habits.
Principles
• Habit formation and creating a disciplined workplace.
DISCIPLINE (SHITSUKE)
![Page 11: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/11.jpg)
SEIRImeans
Sort out items and discard the unnecessary.5 QUESTIONS ABOUT SEIRI
1. Do you find items scattered in your workplace?
2. Are there boxes, papers and other items left in a disorganized manner?
3. Are there equipment and tools placed on the floor?
4. Are all items sorted out and place in designated spots?
5. Are tools and stationary properly sorted and stored?
5 QUESTIONS ABOUT SEITON
1. Are passage ways and storage places clearly indicated?
2. Are commonly used tools and stationary separated from those seldom used?
3. Are containers and boxes stacked up properly?
4. Are fire extinguishers and hydrants readily accessible?
5. Are there grooves, cracks or bumps on the floor which hinder work or safety?
means
A place for everything, everything in its place
SEITON
![Page 12: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/12.jpg)
SEISOmeans
Clean your workplace thoroughly.5 QUESTIONS ABOUT SEISO
1. Are the floor surfaces dirty?
2. Are machines and equipment dirty?
3. Are wires and pipes dirty or stained?
4. Are machine nozzles dirtied by lubricants and ink?
5. Are shades, light bulbs and light reflectors dirty?
5 QUESTIONS ABOUT SEIKETSU
1. Is anyone’s uniform dirty or untidy?
2. Are there sufficient lights?
3. Is the noise or heat at your workplace causing discomfort?
4. Is the roof leaking?
5. Do people eat at designated places only?
means
Maintain a standard.
SEIKETSU
![Page 13: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/13.jpg)
10. SUGGESTION FORMa. Suggestion form – to be prepared by coordinatorb. Suggestion box in each floor – action by coordinatorc. Scrutinizing the suggestions – action by coordinatord. Approving the suggestions and awarding – action by coordinatore. Implementing the approved suggestions – action by zone leader
11. INTERNAL AUDIT FORMa) Preparation of internal audit form – Action by team leaderb) Preparation of audit schedule – Action by coordinatorc) Internal auditing and report – Action by team leaderd) Correction work P-D-C-A and feedback – Action by zone leader
SHITSUKE13. 5 S CORNER
a) Allocating space – action by coordinatorb) Preparation of display stands - action by coordinatorc) Furnishing the area - action by coordinatord) Collection and displaying the photos, charts and information - action by coordinator
14. TREND CHARTSa) Collection of audit scores from team leaders - action by coordinatorb) Preparation of trend charts for each zone and for each unit.
![Page 14: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/14.jpg)
BEST 5S PRACTICES1S- SEIRI
(Clearing the unwanted items) Name Team Zone
Tasks : a) Sorting the list of items / documents available in your workplaceb) Identify any EXCESS itemsc) Identify any RED TAG (Good condition but not in current use) itemsd) Identify any DAMAGED itemse) Identify any USED CONSUMABLES
Disposal action :a) Excess Items - to separate storage area (earmark storage area)b) Red Tag items - to Red Tag area ( earmark Red Tag area)c) Damaged items - to Value Yard ( earlier Scrap yard)d) Used Consumables - to disposal yard
No Unwanted item- Description Quantity Reason forNOT REQUIRED
DisposalArea /yard
![Page 15: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/15.jpg)
BEST 5S PRACTICES2S – SEITON
(Organizing the REQUIRED items)
Name Team Zone
Tasks: a) Sorting the required items in the workplace by function / subject.
b) Identify PRIMARY item – Frequently used items
c) Identify SECONDARY item –Less frequently used items
d) Identify STORAGE item – Rarely used items
Allocating places:
a) Primary items – Very near to your hands
b) Secondary items – Little away from your seat / working location
(10 to 15 steps )
c) Storage items – Away from your working location
Ensuring the items location:
a) Primary item – One inch dia. circular sticker – Yellow colour
b) Secondary item – One inch dia. circular sticker – blue colour
c) Storage area - One inch dia. circular sticker – Green colour
d) Marking lines for the storage areas
e) Labeling / Numbering of the items
f) List of items available in the locations – to be displayed
I.DNo Location
1 Table top
2 Table bottom
3 Side rack top
4 Table drawer-1
5 Table drawer-2
6 Table drawer-3
7 Side rack -inside
8 Cupboard Numbers
9 Record room
10 Stationary room
11 Display board
Location codification :
![Page 16: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/16.jpg)
BEST 5S PRACTICES3S – SEISO
(Cleaning for Checking)
Name Team Zone
Tasks:
a) Create access for cleaning the places and items
b) Identify the cleaning tools locations
c) Making the cleaning tools locations area
d) Identify the list of cleaning tools required with quantity
e) Assess the quantity of dust with period
f) Identify the source of dust
g) Identify the dust preventing actions
h) Identify the cleaning points in the location
i) Labeling / marking the cleaning points
I.D.No
Tools- Description
1 Broom
2 Hand brush
3 Stick brush
4 Mobbing brush
5 Vacuum cleaner
6 Compressed air
7 Pressurized water
8 Cleaning liquid
9 Cleaning powder
10 Cleaning cloth
11 Cleaning cotton waste
Tools codification ::
![Page 17: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/17.jpg)
SESSION VIII• KAIZEN• KAIZEN MATRIX• KAIZEN UMBRELLA
![Page 18: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/18.jpg)
KAIZEN
Kai = change
Zen = for the better
Kaizen or Continuous Improvement
![Page 19: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/19.jpg)
IMPROVEMENT MATRIX
WHO K TOOLS INVESTMENT
I S CS NO
FT CFT
M QC TOOLS
LO
SMTM
L BPRNEW QC TOOLS
SIX SIGMA
HIGHCAPITAL
![Page 20: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/20.jpg)
THE KAIZEN UMBRELLA
KAIZEN
• Customer orientation
•TQC (Total Quality Control)
• Robotics
• QC Circles
• Suggestion System
• Automation
• TPM (Total Productive
Maintenance)
• Kanban
• Quality Improvement
• Just-in-time
• Zero defects
• Small-group activities
• Productivity Improvement
![Page 21: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/21.jpg)
REFLECTIONSSl .No Learning from this module How am I going to apply this
Learning in my job
1.
2.
3.
4.
5.
![Page 22: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/22.jpg)
SESSION IX• LANGUAGE OF MONEY• COST OF QUALITY• MURI, MURA, MUDA• BILINGUAL• ELEPHANT
![Page 23: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/23.jpg)
PROFIT
P=R -C ??
![Page 24: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/24.jpg)
PROFIT• COST REDUCTION ????
• WASTE REDUCTION
• UNNECESSARY, UNWANTED, UNUTILISED
![Page 25: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/25.jpg)
CASH CAN YOU BUY MONEY?
![Page 26: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/26.jpg)
CASH TO CASH CYCLE
CASH INVESTED
FINANCE
PAYMENT COLLECTED
CUSTOMER ADMINSTRATION
CUSTOMER SATISFIED
CUSTOMER RELATIONS
RAW MATERIALS PROCURED
PURCHASE
PRODUCTS & SERVICES
MANUFACTURED
MANUFACTURING
PRODUCTS & SERVICES SOLD
MARKETING
LESS INPUT INPUT LATER MORE
OUTPUT OUTPUT SOONER
![Page 27: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/27.jpg)
White Elephant must be eaten
But
Bite By Bite Step By Step
Project By Project
![Page 28: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/28.jpg)
WORK FORCE LANGUAGE OF
THINGS (LOT)
MIDDLE
MANAGEMENT TRANSLATE LOM LOT
LANGUAGE OF MONEY SENIOR AND TOP
MANAGEMENT
BILINGUAL
![Page 29: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/29.jpg)
COST OF PREVENTIONCOST OF ACTIVITIES THAT KEEP FAILURE FROM HAPPENING.
COST OF APPRAISALCOST INCURRED TO DETERMINE CONFORMANCE WITH CUSTOMERREQUIREMENTS AFTER THE WORK HAS BEEN COMPLETED.
COST OF INTERNAL FAILURE
COST OF CORRECTING PRODUCTS OR SERVICES WHICH DO NOT CONFORM TO INTERNAL CUSTOMER REQUIREMENTS OR ARE IDENTIFIED PRIOR TO DELIVERY AS NOT MEETING THE REQUIREMENTS OF EXTERNAL CUSTOMERS.
COST OF EXTERNAL FAILURE
COSTS TO CORRECT PRODUCTS OR SERVICES AFTER DELIVERY TO CUSTOMER
COST OF EXCEEDING REQUIREMENTS
COST OF PROVIDING INFORMATION OR SERVICES WHICH ARE NOT NECESSARY OR FOR WHICH NO REQUIREMENTS HAVE BEEN ESTABLISHED
COST OF LOST OPPORTUNITIES
LOST PROFITS DUE TO THE COMPANY NOT SATISFYING OR BEING ABLE TO SATISFY, THE REQUIREMENTS OF EXTERNAL CUSTOMERS.
COST OF CONFORMANCE
COST OF NON-
CONFORMANCE
COST OF LOST OPPORTUNITIES
CO
ST O
F Q
UA
LITY
![Page 30: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/30.jpg)
MEANING OF 3 MU’S (MURI, MUDA, MURA)
Meaning
Muri1. Being difficult to do. A job that is difficult to perform.2. Doing forcibly3. Being unreasonable. Something where reason cannot be
established.
Muda1. Useless act2. Unprofitable act3. Useless or unprofitable items or works etc
Mura1. Not being uniform owing to dark or light color tones or
difference in thickness of articles2. Not regular or uniform
![Page 31: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/31.jpg)
MURI(Overburden)
• Overburdening people or equipment. • This is in some respects on the opposite
end of the spectrum from MUDA. MURI is pushing a machine or person beyond natural limits. Overburdening people results in Safety and Quality problems. Overburdening equipments causes breakdowns and defects.
![Page 32: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/32.jpg)
MURI IN WORK
• Work that needs force. (Muscle fatigue)
• Unnatural posture (Posture-related fatigue)
• Work that requires precaution (Nervous fatigue)
• Unreasonable work (Environment-related fatigue)
![Page 33: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/33.jpg)
MURA(Unevenness)
• You can view this as the resolution of the other two M’s. In normal production system, at times there is more work than the people or machines can handle and at other times there is a lack of work. Unevenness results from an irregular production schedule or fluctuating production volumes due to internal problems, like downtime or missing parts or defects. MUDA will be a result of MURA. Unevenness in production levels means it will be necessary to have on hand the equipment, materials, and people for the highest level of production – even if the average requirements are much lower than that.
![Page 34: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/34.jpg)
MURA IN WORK• Rushing type production model (evening production model,
week-end production model, month-end production model) To eliminate production variation for weekly, daily
or hourly production quantity.• Allocation of manpower (capability) and the work involved
(load) are not balanced.• Unbalanced production capability among different processes.• Making too many in one go
To produce necessary quantity of necessary items at necessary timing only.
• Working is not rhythmical.
![Page 35: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/35.jpg)
MUDA(Waste)
• Non-value added.• The most familiar M includes the seven
wastes. These are wasteful activities that lengthen lead times, cause extra movement to get parts or tools, create excess inventory, or result in any type of waiting.
![Page 36: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/36.jpg)
MUDA IN WORK• Idle state (Waiting, Monitoring)• Walking operation (walking operation of one step or a
few steps)• Work operation involving moving materials,
components, tools etc. ( pick up and placing operations)• Work operation that originated due to some incomplete
work ( Work operations associated with searching, correction, adjustment, removing stains etc.)
• Work that delay other motions – Change in holding position, or re-positioning of material or
components; counting or checking materials or components
![Page 37: Quality concepts manmohan10.2.10 fn&an](https://reader034.fdocuments.in/reader034/viewer/2022051609/54795359b4af9f30398b45e8/html5/thumbnails/37.jpg)
MUDA OF CORRECTION
MUDA OF WAITING
MUDA OF PROCESSING
MUDA OF TRANSPORT
MUDA OF OVER PRODUCTION
MUDA OF INVENTORY
MUDA IN MOTION