QUALITEK SOLDERING PRODUCTS - Philmore/Datak 288.pdf · QUALITEK SOLDERING PRODUCTS Qualitek Super...
1
QUALITEK SOLDERING PRODUCTS Qualitek Super DEOX This product is spe- cially formulated to convert the oxides of solder (known as dross) that form on solder in solder pots into good solder. Use of Super Deox can reclaim over 80% of dross into usable sol- der. This substantially reduces solder cost. 50-6304 Super Deox 4 oz. jar Qualitek Ceasolder Solder Mask Peelable Solder Mask Ceasolder is a high temperature rubber latex. It is used to temporarily mask metal surfaces from molten solder during the sol- dering process. It can be applied directly from the applicator bottle or by brush. 50-4212* Peelable Solder Mask 12 oz. *Special Order only--- 90 day shelf life Qualitek Liquid Fluxes Liquid Fluxes are formulated for general and specific applications. Qualitek offers a large variety of fluxes for the production industry. There are rosin based fluxes, Alcohol Based fluxes, and Water Soluble Fluxes as well. Liquid fluxes can be applied by brush, automation or spray depending upon the requirements. Philmore is offering two of the most popular types in several put ups. RMA Flux Rosin Based Flux Mildly Activated, clean with solvent No- Clean Flux Water-Soluble Flux Qualitek Rework-Wands The Qualitek rework-wand is a unique tool for rework and touch-up soldering. It allows a controlled application of flux, eliminating the mess from flux bottles. Rework wands are ideally suited for SMT rework, TAB assembly operations, and component applications. There are three formulas available, R.M.A. (rosin mildly active), Water-soluble, No-clean. Part Number Description Carton QTY 50-30233 #302 Low Solids No-Clean 50-28533 #285 “RMA” <25% Solids 50-73733 #737N Neutral PH Water Soluble Qualitek Paste Flux Fluxes are intended to be used to reduce solder balling, and bridging. The proper flux allows for proper solder flow and increased wetting of desired areas. Qualitek offers several different types of fluxes including Water Soluble Fluxes, and Rosin Fluxes to name only a few. Philmore is offering the most popular paste flux in two sizes. 50-4002 2 oz container 50-4016 16 oz container Delta Tip Tinner by Qualitek This flux is designed to tin soldering Iron tips. This makes the tips last longer and conduct a more even heat. Philmore offers this in the most pop- ular alloy in a convenient container with mounting tape. 20 20 20 288
Transcript of QUALITEK SOLDERING PRODUCTS - Philmore/Datak 288.pdf · QUALITEK SOLDERING PRODUCTS Qualitek Super...
QUALITEK SOLDERING PRODUCTS
Qualitek Super DEOXThis product is spe-
cially formulated toconvert the oxides ofsolder (known asdross) that form onsolder in solder potsinto good solder. Useof Super Deox canreclaim over 80% ofdross into usable sol-der. This substantiallyreduces solder cost.
50-6304 Super Deox 4 oz. jar
Qualitek Ceasolder Solder Mask
Peelable Solder Mask
Ceasolder is a high temperature rubberlatex. It is used to temporarily mask metalsurfaces from molten solder during the sol-dering process. It can be applied directlyfrom the applicator bottle or by brush.
50-4212* Peelable Solder Mask 12 oz.*Special Order only--- 90 day shelf life
Qualitek Liquid FluxesLiquid Fluxes are formulated for general and specific applications. Qualitek offers a large variety of fluxes for the production industry. There are rosin
based fluxes, Alcohol Based fluxes, and Water Soluble Fluxes as well. Liquid fluxes can be applied by brush, automation or spray depending upon therequirements. Philmore is offering two of the most popular types in several put ups.
Rosin Based
50-28502 2 oz50-28532 32oz50-28501 1 Gal
Water Soluble
50-73702 2oz50-73732 32oz50-73701 1 Gal
No-Clean
50-30202 2oz50-30232 32oz50-30201 1 Gal
RMA Flux
Rosin Based Flux Mildly Activated, clean with solvent
No- Clean Flux
No Rosin, Low Solids, needs NO Cleaning, Good wetting
Water-Soluble Flux
Highly Active, MUST CLEAN RESIDUE, Distilled Water
Qualitek Rework-WandsThe Qualitek rework-wand is
a unique tool for rework andtouch-up soldering. It allows acontrolled application of flux,eliminating the mess from fluxbottles. Rework wands are ideally suited for SMT rework, TAB assembly operations, andcomponent applications. There are three formulas available, R.M.A. (rosin mildly active),Water-soluble, No-clean.
Part Number Description Carton QTY50-30233 #302 Low Solids No-Clean50-28533 #285 “RMA” <25% Solids50-73733 #737N Neutral PH Water Soluble
LKG Acid & Cleaning BrushesThese brushes have a thousand uses. You may use them for
applying flux, remove foreign material from the surface, or to cleanparts.
50-5405 5 Pack50-5400 Bulk Pack
Qualitek Paste FluxFluxes are intended to
be used to reduce solderballing, and bridging. Theproper flux allows forproper solder flow andincreased wetting ofdesired areas. Qualitekoffers several differenttypes of fluxes includingWater Soluble Fluxes,and Rosin Fluxes toname only a few.Philmore is offering themost popular paste flux intwo sizes.
50-4002 2 oz container50-4016 16 oz container
Delta Tip Tinner by QualitekThis flux is designed to tin soldering Iron tips. This makes the tips last
longer and conduct a more even heat. Philmore offers this in the most pop-ular alloy in a convenient container with mounting tape.
50-63371 1 oz tin 63/37 alloy
202020
288
