QROPS MONEY PUR HASE TRANSFER ANALYSIS USER GUIDE UG... · 2016-08-16 · 2. QROPS Money Purchase...
Transcript of QROPS MONEY PUR HASE TRANSFER ANALYSIS USER GUIDE UG... · 2016-08-16 · 2. QROPS Money Purchase...
QROPS MONEY PURCHASE TRANSFER
ANALYSIS
USER GUIDE
1. QROPS Money Purchase User Guide Selectapension
CONTENTS
1. SELECT EITHER NEW OR EXISTING CLIENT ................................................................................. 2
NEW CLIENT .................................................................................................................................... 3
EXISTING CLIENT ............................................................................................................................. 5
SELECTING AN EXISTING CASE ........................................................................................................ 6
CREATE NEW ANALYSIS ................................................................................................................... 6
2. EXISTING PLANS ............................................................................ Error! Bookmark not defined.
EXISTING PLAN DETAILS ............................................................................................................... 7-8
EXISTING SCHEME DETAILS ........................................................................................................... 10
PROJECTIONS ........................................................................................................................... 11-11
ADDITIONAL PLAN BENEFITS ........................................................................................................ 13
3. REMUNERATION ................................................................................................................... 14
4. HOW TO BUILD AND SELECT A WRAPPER/TRUSTEE ................................................................ 15
4. PRODUCT SELECTION ............................................................................................................. 16
NEW INVESTMENT ........................................................................................................................ 16
ALTERNATIVE PRODUCTS .............................................................................................................. 16
PROVIDERS AND PRODUCTS ......................................................................................................... 17
5.RESULTS SUMMARY ................................................................................................................ 18
BESPOKING OPTIONS .................................................................................................................... 19
6. FULL COMPARISON ................................................................................................................ 20
CONSOLIDATED RESULTS .............................................................................................................. 20
INDIVIDUAL PLAN RESULTS ........................................................................................................... 20
CAPITAL VALUE OF DEATH BENEFITS ............................................................................................ 21
CHART COMPARISON OF OVERALL BENEFITS ............................................................................... 22
RECOMMENDATIONS & Report .................................................................................................... 22
7. PRINT OPTIONS ...................................................................................................................... 23
JURISDICTIONS .............................................................................................................................. 24
2. QROPS Money Purchase User Guide Selectapension
1. SELECT EITHER NEW OR EXISTING CLIENT
Welcome
Upon initially logging into Selectapension, a user will arrive at our Welcome page. This page offers three
options; create a New Client, access an Existing Client and Fund Research. This screen also provides details of
which tools are available to the individual subscription.
Selecting a New Client will enable the creation of a file containing a client’s basic details. These details will be
stored on the system and can be accessed when using any of the Selectapension tools.
The Existing Client option will bring up a library of stored clients. The client details can be viewed by clicking on
the client name. From this point a user can choose to View Stored Analyses or Create New Analysis for a
client.
Selecting Fund Research will launch our fund filtering search tool. To learn more about how to use this tool,
please see the Funds Functionality User guide.
The current stage of workflow is denoted by the underlined title. Navigation through the workflow is
controlled by Next and Back buttons. Input will be sense checked to ensure validity of the data before the
process will continue. For example, if one of the mandatory fields is left blank, (mandatory fields are shown in
yellow), the user will be unable to move to the next stage until that field has been completed.
3. QROPS Money Purchase User Guide Selectapension
NEW CLIENT
The first step to creating an analysis is creating a customer file by inputting the client data as explained below.
Yellow boxes are mandatory and must be completed before moving forward.
FIELD DESCRIPTION
Ref: Insert your reference if desired
Title: Select an option from the dropdown list. Please note that the system will
validate the choice of title against the choice of ‘Sex’
Forename: Enter the client’s forename
Middle Initials: Enter the client’s middle initials if applicable
Surname: Enter the client’s surname
4. QROPS Money Purchase User Guide Selectapension
Sex: Select the sex of the client from the dropdown list
Date of Birth: Enter the client’s date of birth in dd/mm/yyyy format. This can either be
entered manually or selected from the calendar
Employment status: Select from the dropdown list
Marital status: Select from the dropdown list
Partner’s D.O.B.: Enter partner’s date of birth if relevant in dd/mm/yyyy format. This can
either be entered manually or selected from the calendar
Partner’s name: Enter the partner’s name if applicable
Any Dependents: Select Yes or No
If Yes is selected, additional notes can be added to include details of
dependents
Attitude to Risk: Select the client’s attitude to risk from the dropdown list
Lifetime Limit Protection: Select from the dropdown list and enter the Lifetime Limit applicable
Health status: Select from the dropdown list
Notes: Any additional notes may be added and will be detailed within the report
5. QROPS Money Purchase User Guide Selectapension
EXISTING CLIENT
Select the existing client that you wish to work with by clicking the client’s name. For large client libraries the
user can search for a client using the search function or by clicking on a column header to sort by column.
Once the client details have been recalled the user can then complete a multitude of tasks.
Delete Client removes all the information created for that particular client.
Update Client Details enables editing of client information at any time.
View Stored Analyses allows access to previous cases carried out for this particular client.
Create New Analysis allows the user to create a new analysis type for a client.
6. QROPS Money Purchase User Guide Selectapension
SELECTING AN EXISTIN G CASE
Click on the case to view or edit previously entered information. Alternatively, click on Create New Analysis to
start a brand new case.
CREATE NEW ANALYSIS
Click on Create New Analysis to select an analysis suite.
Select Pensions to access QROPS Analysis.
7. QROPS Money Purchase User Guide Selectapension
You will then need to choose QROPS – Money Purchase from the two options.
2. EXISTING PLAN
EXISTING PLAN DETAILS
*If analysing multiple plans they must all be on the same projection basis.
8. QROPS Money Purchase User Guide Selectapension
*Please note: This section will only appear if the client is employed
Age(s) for analysis: Description
Proposed: The client’s retirement age according to the Plan(s)
Desired: Optional field if analysis is to an age other than the scheme’s normal retirement
age
Projection Basis: Description
Monetary Select this option if the ceding scheme has used projections in monetary terms,
such as 2%, 5% & 8%. These rates can be overtyped with any rates given by the
scheme provider
Inflation Adjusted Select this option if the ceding scheme has provided inflation adjusted
projections. The default rates are -0.5%, 2.4% & 5.4%, these can be overtyped
with any rates given by the scheme provider
Pension Status Description
Member of or Eligible to join an Occupational Pension Scheme Select Yes No or Unknown
Member of or Eligible to join a Group Personal Pension Select Yes No or Unknown
Option to transfer to an Occupational Pension Scheme Select Yes No or Unknown
Existing GPP to be included in this Analysis Select Yes No or Unknown
9. QROPS Money Purchase User Guide Selectapension
Summary of Pension Plans to be Transferred
These are the existing plans that the user wishes to analyse to a new contract. To review, change or delete a
plan, simply click on the plan name
10. QROPS Money Purchase User Guide Selectapension
EXISTING SCHEME DETAILS
Field Description
Provider Name: Enter the name of existing scheme Provider from the drop down list or select
Other and use the free text box available.
Product Name: Enter the name of existing scheme
Type: Select the type of pension to be transferred from the drop down list
Fund Valuation Date: Enter the date on which the quotation has been provided in a dd/mm/yyyy format or select the date from the calendar
Fund Value: Enter the fund value of the ceding scheme here
Transfer Value: Enter the transfer value of the ceding scheme here
Protected Rights included in the Transfer Value?
This is only relevant for illustrations issued pre-April 2012, where the provider has split the projections between protected and non-protected rights. Select Yes or No
Current Death Benefits Value:
Enter the current fund value payable in the event of death before vesting
11. QROPS Money Purchase User Guide Selectapension
PROJECTIONS
With the default set to Aggregate Rates, a user will see the following table when the analysis is being run on a monetary basis. The relevant fund projection rates can be added as per the illustration along with any paid up figures.
If an analysis is being carried out on an Inflation adjusted basis, additional options can be selected as per the terms in the illustration.
Headline Rates: This option should be selected if growth rates have been discounted by inflation but Headline Rates, i.e. 2%, 5%, 8% have been quoted.
Inflation Adjusted Rates: This option should be selected if the growth rates have been discounted by inflation and the rates given reflect this adjustment. In this case the lower growth rate will always be shown as a negative figure i.e. -0.5%, 2.4%, 5.4%.
12. QROPS Money Purchase User Guide Selectapension
If it’s not possible to obtain projections from the existing scheme, the Calculate button can be used to
generate projections to any given rates. To use this functionality, charges for the existing scheme will be
required.
Selecting Varying Rates allows a user to input specific funds that each individually have varying growth rates. For example, some providers may supply illustrations on a split basis i.e. funds invested in cash may be produced using growth rates of 0.5%, 3.5% and 6.5% and the Managed Fund illustrated using 2%, 5% and 8% growth rates. The fund spilt can either be entered as a percentage of the total (%) or as a cash amount (£). This functionality is available on both a monetary and inflation adjusted basis.
To add a new fund, click the green + button. To delete a fund, click the red X button.
*Please note splits must total 100% of the fund value before moving forward
13. QROPS Money Purchase User Guide Selectapension
ADDITIONAL PLAN BENEFITS
Benefits that are currently available with the client’s existing scheme can be confirmed here. Additional
comments can be added if necessary and will be included in the report.
A summary of plans added will now appear as shown above. To edit or view one of these plans, simply
highlight and click. To add another plan, click on Add New Plan. When all existing plans to be transferred have
been entered, click on the Next button to move forward on the case.
14. QROPS Money Purchase User Guide Selectapension
3. REMUNERATION
Remuneration to be applied – Select No if remuneration is not to be taken. Select Yes to add
remuneration. The user can specify or use the Provider Default.
Field Description
Single Premium Enter an initial percentage and/or monetary amount
Regular Premium Level N/A
Regular Premium Initial N/A
Fund Based Enter the Fund Based fee to be taken as a percentage and/or monetary
amount of single and regular premiums
15. QROPS Money Purchase User Guide Selectapension
4. HOW TO BUILD AND SELECT A WRAPPER/TRUSTEE
You can build your QROPS wrapper within Personal Settings, QROPS Trustee Wrappers and Jurisdictions,
QROPS Trustee Wrappers. Here a library of wrappers can be stored.
The user has the ability to enter a QROPS initial charge and QROPS annual charge either a percentage or cash
amount, along with any minimum and maximum charges that might apply.
Once the wrapper has been created, click Save.
Now a wrapper has been created, this can be used within the analysis.
Use the drop down to select one wrapper for the analysis. Click Next
16. QROPS Money Purchase User Guide Selectapension
4.PRODUCT SELECTION
NEW INVESTMENT
The Invest options for the new plan can be selected as Plan Default Settings, Defined Templates or DFM
Strategies. See the Funds Functionality user guide for more details.
ALTERNATIVE PRODUCTS
17. QROPS Money Purchase User Guide Selectapension
PROVIDERS AND PRODUCTS
By ticking Select all Providers and Select all Products, all available providers and products will be included in
the comparison. Alternatively, you can pick one or more providers and products from the list.
Depending on how many Providers are selected, the page will continue down highlighting the products
available for comparison. Products can be selected by ticking the appropriate boxes or by clicking the Select
all Products box as shown above. Greyed out plans are unavailable for the reason given below the plan.
Bespoke Plans, Bespoke Underlying Investments can be created within our Bespoke Plans function held in
Personal Settings. When creating the bespoke plan it can be marked for use in QROPS. Please see the Bespoke
Plans Userguide.
Existing Plan - Some provider’s charges may be subject to a large fund discount. Where a proposed plan is
identified as an ‘Existing Plan’, the effect of the total fund may reduce the charge applied to the proposed new
investment. There may also be setup or annual fees that are waived. The system will take an ‘Existing Plan’
into consideration and reflect the charges accordingly.
18. QROPS Money Purchase User Guide Selectapension
5.RESULTS SUMMARY
When the analysis has run, the products selected for comparison will be listed. The existing scheme will be
highlighted in green. The highest value, based on the mid growth rate, will be at the top. If the medium growth
rate is not available results will be ranked by the low growth rate. The RIY (reduction in yield) will also be
shown.
19. QROPS Money Purchase User Guide Selectapension
BESPOKING OPTIONS
A plan may be ‘bespoked’ on the results page to change a % AMC or a monetary charge if it differs to that held
on the system. This may be used to reflect a GPP or to include a fund charge where funds have not been
chosen. Adjustments can be made by clicking on
Example
In the example below a 0.2% adjustment has been applied.
In order to bespoke the results, use the information below to assist with completing the relevant fields.
Once the adjustments have been entered click the Recalculate button at the foot of the page. The revised
results will be shown and highlighted accordingly.
Up to three plans can now be selected for full comparison. However, should there be more than one existing
scheme, only one plan can be selected for the full comparison. Simply select the plans and click the Full
Analysis button.
FIELD DESCRIPTION
Adjust Allocation A positive value will enhance the fund. A negative value will reduce the
fund to create an additional charge/fee
Adjust AMC Select positive to increase the AMC to add an additional charge/fee. A
negative will reduce the AMC e.g. if the standard AMC is 0.9% an
adjustment of -0.2% will make the charge 0.7%
Lump Sum Select positive to enhance the fund. A negative will create a charge
Fund Splits The fund splits option can be used when the system has been run on
default settings. You are able to enter the Name, Split and AMC of the
fund to be used. This will override the default fund used.
20. QROPS Money Purchase User Guide Selectapension
6. FULL COMPARISON
CONSOLIDATED RESULTS
The table below shows the effect of multiple products consolidated to a single plan. This may well have the
benefit of large fund discounts.
The consolidated existing schemes are shown above in green. The proposed new scheme details are shown
below this. For the case above, at the mid growth rate, it is deemed a positive move to the new plan. Listed
also are details of the Rate of Return Required for the new scheme, the Effect on Fund compared to the
existing fund value and the Reduction in Yield.
INDIVIDUAL PLAN RESULTS
If there’s more than one plan to be transferred, each plan will be detailed on a standalone basis as shown
below. Any remuneration applied will also be taken off each plan.
21. QROPS Money Purchase User Guide Selectapension
The results are shown on a paid up basis as well as a redirection of premium only according to the data that
has been entered. The screen below illustrates the fund, including any contributions being made, moving to a
new scheme. The second part of the results below shows the effect of moving the contributions only.
CAPITAL VALUE OF DEATH BENEFITS
The table below highlights the day one capital value of death benefits should death apply both before (Ceding
Scheme/Plan) and after (Transferring into arrangements) a transfer is affected.
22. QROPS Money Purchase User Guide Selectapension
CHART COMPARISON OF OVERALL BENEFITS
The chart below shows an overview of the client’s existing schemes against the proposed receiving scheme(s).
RECOMMENDATIONS & REPORT
Additional text can be added to the report by clicking on Include Recommendations. Suitability or Reasons
Why letters can be pasted into this section to make the transfer report complete.
To proceed to the report print options click Report.
23. QROPS Money Purchase User Guide Selectapension
7. PRINT OPTIONS
The Additional Notes box allows for free text, which will appear in the report along with the selected product
charges. If an adjustment has been made to a product charge in the bespoking option, a reason for the change
should be recorded here.
The Analysis Label is optional. Any text entered here will appear on the report cover. This label can be used to
identify a report when different versions have been produced.
Click Create Report to produce a PDF document, this can be printed and saved. All reports produced will be
stored within Archived Reports for future reference.
24. QROPS Money Purchase User Guide Selectapension
JURISDICTIONS
Details of the QROPS rules applicable to various countries can be recorded and selected for inclusion in the report. These can be created in the Personal Settings Area.
When creating a Jurisdiction file, the data can be entered as text or numerical. The details in relation to UK pensions and the HMRC rules on QROPS are embedded within the system and can
be selected along with up to three Jurisdictions for report inclusion.