Q- Lon Rolled in Gasket (RIG) - Test Valley Windows · Rolled-in Gasket Product ... of operation....
Transcript of Q- Lon Rolled in Gasket (RIG) - Test Valley Windows · Rolled-in Gasket Product ... of operation....
Rolled-in GasketProduct
• Features
• U.V. Stable
• Unique gasket design to
Duraflex
• Low operating forces
• Memory recovery, 90%
• Exceptional performance over large temp. range ie: -20ºc to 70ºc
• Increases acoustic sound
• Benefits
• Will not discolour in direct
sunlight
• Differentiates from normal
gaskets
• Reduces wear and tear, ease
of operation.
• Retains original shape year after year and therefore gives greater seal.
• Will not freeze to mating face
• Increases acoustic sound properties of product, upto35%.
• Gasket leaves no rigid sprueafter welding
• Gasket can be hand inserted
• The gasket sight -lines of a
Duraflex window stays the same
• Mirrors sight-line of beads
• Minimises noise levels from outside environment
• Eliminates glass breakage's and provides internal and
external seal right into corners
• Can replace damaged gasket with like for like. Major advantage over any co-ex
system
• Major benefit over post co-ex
systems where large black gasket lines are currently
visible and unsightly
• Gives perfect alignment
through glass.
Page 1
Rolled-in Gasket
Sales
• Features
• Conforms to BS7412, 2002.
• BBA approved.
• Hidden gasket line.
• Lifetime guarantee.
• Meets European and World
standards.
• Benefits
• Proven product.
• Proven product.
• No unsightly black lines
• Backed by supplier.
• Proven product.
• Easily replaced if damaged.
• Been used for over 30 years in doors and windows.
• Minimal closing force.
• Vast temp. range -20�c to 70�c
• Prevents costly remarks.
• Proven track record.
• Ease of operation.
• Suits all weather conditions
and does not freeze to mating parts.
Page 2
Rolled-in Gasket
Fabricator
• Benefits
• Maintains perfect seal.
• Reduced labour costs.
• Increase production levels.
• No gaps at joints through gasket shrinkage or poor insertion techniques.
• Prevents waste and cost.
• Features
• No shrinkage once cut.
• No gasket to insert.
• Frees up shopfloor space.
• Consistent compression at
joints.
• Eliminates gasket offcutslaying around on shopfloor.
• Safer working environment.
• Frees up valuable space.
• Only one gasket required.
• Greater return on sales.
• Will eliminate shopfloorsgetting slippery through siliconised gaskets.
• Reduces stock holding.
• Common gasket for both
static and dynamic seals.
• Increased throughput
without increasing overheads.
Page 3
Rolled-in Gasket
Installation
• Features
• Fitters will not have to insert
gasket.
• Consistent glazing
compression.
• Easy to replace damaged
product on site.
• Replacement gasket
identical to original.
• Benefits
• Speeds up installation.
• Speeds up glazing.
• Prevents costly remarks.
• Customer sees no difference if damaged
• One gasket for everything.
• Cleaner gasket to handle if damaged product has to be
replaced.
(Non siliconized).
difference if damaged product has to be replaced.
• Reduces stock holding.
• Less messy on site no worries regarding skin
allergies.
Page 4
Rolled-in GasketRolled-in vs Co-Ex
• Features of Rolled in Gasket
• Can be replaced with same
product if damaged.
• Secure location.
• Consistent gasket shape.
• Easier to recycle.
• Negatives of Post Co-Ex
• Difficult to remove damaged
seal and replace with same.
• Poor co-ex adhesion leads
to costly claims.
• Post co-extruded gasket shape can be difficult to maintain.
• Contaminates re-grind.
• Easier to control external
weld sprue.
• Internal corners more forgiving when glazing.
• Dynamic seal low compression forces.
• Aesthetics (concealed gasket within frame).
• External corners can be extremely rigid, and prevent continuity of seal around frame.
• Difficult to eliminate hard sprue with out destroying
seal.
• Stiff and un-forgiving.
• Large black gasket lines visible around edge of sashes
Page 5
Rolled-in GasketTechnical
• Features• Cutting
• Easy to cut.
• Rolled-In.
• Std cutting operations.
• Std blades for PVCu.
• Dedicated Weld Blocks
• Adjustable pressure.
• Reduced weld sprue.
• Gasket inserts.
• Welding
• Butt & sash welds.
• Benefits
• No tearing.
• Does not pull out.
• No saw setting issues.
• No additional costs.
• Reduces weld sprue.
• Gives better finish.
• Provides restriction and prevents weld sprue effecting gasket compression.
• Dedicated blocks.• Butt & sash welds.
• Frames, Transom & Mullions.
• Drainage Prep
• Re-position existing cutter.
• Cleaning
• No Gasket drills.
• Reduced cycle times.
• Nibbing machine.
• Nibbing machine.
• Gasket
• Rigid foot.
• No shrinkage.
• Colour
• Black
• Dedicated blocks.
• Standard tooling.
• Prevents tearing of gasket.
• Reduced costs.
• Increased capacity, upto 17%.
• Consistency of seal.
• Guarantees no glass breakage's.
• Secure location.
• Maintains good seal.
• Matches all profile finishes.
Page 6