PZ2R x 4 Pozi Reduced Drive 3rd Hand & Little Hand ...
Transcript of PZ2R x 4 Pozi Reduced Drive 3rd Hand & Little Hand ...
693
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
PZ2R x 4 Pozi Reduced Drive
• Pozi Drive #2 Reduced Screwdriver for adjusting hinges.
• The hardened tip allows for a longer life.
Item # Length Drive Pack Qty.QS12359* 4.000” Pz#2 1
SQ2 X 1” Square Insert Impact Drive Bit
• Impact drive bits designed to take the pounding of the impact drive tools
Item # Drive Qty./Pack Length
QS11778V5* Sq#2 10 1.000”
3rd Hand
• 70 lb. capacity• 5’-12’ extension• 360° articulating top and bottom feet• Ball detents for positive locking• Neoprene grip• Dust barrier clip included
Item #FC3HAND5HD*
3rd Hand & Little Hand Accessories
• 3rd Hand Carrying Bag holds four 3rd Hands plus accessories
• UniversalFoot comes standard on all Little Hands and makes the 3rd Hand free standing
• LaserMount enables you to quickly clamp a mounting device onto the 3rd Hand pole and position your laser wherever you need it
• LaserMount is easy to install and its rotational L-bracket allows the beam to be placed at any angle
Item # Description
FCUNIVERFOOT* UniversalFoot
Little Hand
• 16.5"-22.8" extension• UniversalFOOT comes standard on all Little Hands• Can brace or clamp whenever and wherever you
might need an extra hand
Item #FC3HAND157HD*
SpeedClip
• Easily clips over pants or belt• Ideal for holding a tape measure• Features built in pencil sharpener
Item #FCSPEEDCLIP*
Crown Molding Clip
• Heavy Duty ABS is Sturdy and durable• Easy to install and remove
Item #FCCROWNMOLD*
694
ProCarpenter Tape Measure
• Built-in erasable note pad and pencil sharpener
• Heavy-duty 1” blade with 4 rivet construction
• Shock-resistant rubber casing• Dual thumb and finger locks• Easy belt clip• High-contrast black on white scale
Item # Description
FCPMS16* 16’ Metric/Standard
FCPSS16* 16’ Lefty/Righty
FCPS16* 16’ Standard
Custom Color Punch KitEdgebanding
• Punch out exactly the number of Fastcaps needed
• Ideal for matching custom colors• Kit includes: flush mount drill bit,
roll of 1” SpeedTape, 3 dies (9/16”, 11/16”, and 3/8”), and hard-shell carrying case
Item # DescriptionFCHOLEPNCHKIT* Hole Punch Kit
FCHOLEPUNCH* Hole Punch (Single)
Euro Door Stop
• Designed to use with European cabinets
• Easy to install
Item #FCEURODRSTOP*
Micro Flush Cut Trimmers
• Rounded flush side cutting surface• Allows you to get into tight spots
when removing brad nails or small slivers
Item #FCPLIERMICRO*
Power Shears
• The Power Shears are great for cutting wood veneer and laminate
• Small and compact, yet razor sharp to cut through the toughest material like canvas and burlap, and even aluminum
Item #FCPOWERSHEARS*
Flush Cut Timmers
• The Flush Cut Trimmer enables you to trim edgebanding and brad nails flush to the surface
• Works great with standard wood and PVC edgebanding
Item #FCPLIERSFLUSH*
Heavy Duty Flush Cut Trimmers
• Heavy Duty trimmers cut nails flush
Item #FCPLRHVYDTYFC*
695
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Electrical Trim Ring
• Cleans up electrical cutouts in the back of cabinets
• Can be trimmed to specific return depths
• Easy to install• Available in custom colors
Item # Desc. Depth Width Height Color
FCETRDOUBLE* Double Outlet
1[¼]” 6.25” 6.25” White
SkinsGloves
• Lightweight & tough seamless design• Ultra thin, allowing you to feel fine design• Sang, puncture and abrasion resistant• Superior grip• Machine washable and dries quickly
Item # Size
FCWORKGLVLRG* Large
FCWORKGLVMED* Medium
FastBreak Melamine Sander
• Great for any width• Sand 2 edges at once• Storage for extra sandpaper• FastBreakXL sands up to 2-3/8” and
down to 3/4” designed for entry doors and larger panels
Item # DescriptionFCFASTBREAK* Melamine Sander
FCFB180GRIT10* 180 Grit Sandpaper
FCFB80GRiT10* 80 Grit Sandpaper
Saw Hood
• Great for miter saws• Easy to set up and eliminates
billowing dust • Protective cover when working
outside in inclement weather
Item # DescriptionFCSAWHOODWH* Miter Saw Hood
DoorMag3rd Hand
• The DoorMag creates in and out access though any dust barrier wall
• Made from neodymium magnets that keep plastic tight to poles
Item #FC3HDOORMAG*
Outlet Stamp
• Accurately marks the back of cabinets for electrical outlets
• Plugs into outlet receptacle and marks four precise marks, making it easy to see where to cut
• Marks for both single and double gang boxes
• Includes five makers
Item #FCOUTLETSTAMP*
696
AccuScribe Pro
• Maintains a consistent scribe offset, staying parallel to the object surface
• Non-rocking bottom• Ideal for scribing the trim strip on
kitchen cabinets, architectural moldings, countertops, splash guards, tile, and flooring
• Features precision pencil sharpener• Removable compass point with storage clip• Articulating pencil head
Item #FCACCUSCRIBPR*
Upper Hand System Kit
• Kit includes: 2 Upper Hands, 4 6” x 6” Universal feet and carrying case
Item #FC3HDSYSTEMKT*
Plasti-Cut® File
• Designed specifically for maximum performance on decorative laminates
• Extra sharpness and hardness ensures a long life of fast, clean filing
• Excellent for edge finishing other plastics
• Select the mill for smoothest finish and the Fast® for fast cutting, coarse finish
Item # Size Description
PLPC-10F 10" Fast®
PLPC-10M 10" Mill
PLPC10DX* 10” Duplex
PLPC-12F* 12" Fast®
PLPC-12M 12" Mill
PLPC-14F 14" Fast®
PLPC-14M 14" Mill
Laminate File
• First quality, general purpose American-made file for laminate
Item # Size Description Case Qty.
PLSM12MC* 12" MIll 6
PLSM14MC* 14" Mill 6
File Card
• Ideal for cleaning all types of files (not recommended for Plasti-Cut® files)
• Tempered steel bristles are angled forward and spaced to remove stubborn clogging and restore cutting capacity
• For best results, pull the card across the file surface in a direction parallel to the grooves
• The file card with brush features a brush with stiff plastic bristles on the other side that removes most of the dust and filings (for stubborn clogs flip to card side)
Item # Size Description
PLFC-87* 8" Without Brush
PLCB-88* 10" With Brush
All-Purpose Black Maxi-Sharp File
• Black finish process results in durable, sharper teeth that last longer and improve filing efficiency
• 10" L x 31/32" W x 3/16" thick• Bastard cut on one side with finer teeth on the other side• 12/box
Item # DescriptionSI7318800 Standard
SI78188100 Best
697
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Round Straight File
• Ideal for work in corners and holes• Double cut• 6" x 1/8"• 12/box
Item #SI8418150*
Multi-Kut® Flat
• Features a diamond pattern “double chip breaker” allowing for fast stock removal while leaving a smooth finish
• Single cut, course tooth
Item # Weight Box Qty.SI73244000 4lbs, 8oz 6 per box
Hand Laminate Slitter
• Manual hand slitter can be used on high pressure laminates and veneers
• Can be utilized as a stationary tool as well as a portable one
• Bracket enables user to have both hands on the material being slit
• Replacement cutters are sold 2/set• Cutting thickness is micro adjusted and
width is easily set• Portable and lightweight• Easy to use and requires no electricity• Maximum material thickness: 1/16"• Minimum material width: 3/8"• Maximum material width: 3"• Cuts up to 4-5/16"
Item # Description
VTCO15E* Slitter
VTTK78V* Bracket
VTT78B* Replacement Cutters
Gem Orbital Sander
• Sands, polishes, and finishes wood, solid surfaces, concrete countertops and metal
• Faster than hand motion, this GEM is completely stable, with no tendency to "get away" from the operator
• Heavy-duty ball bearing capacitator motor
• No gears to grind or strip out• No carbon brushes or armature
winding to burn out• Exclusive removable shaft system• 1,700 RPM at 110v• Includes 11” dia. drive pad
Item # Drive Pad Qty.GMBWHL 11” dia. 1
GMC515CH 11” dia. 1
Gem Dust Shroud
• The shroud easily retro-fits any Gem sander (item no. GMBWHL) and operates with any standard shop vacuum
• Includes adapter to accommodate 1-1/4” vacuum hose
• Ideal for onsite installs; dust is no longer an issue
Item # Outlet PipeGMS112* 1[½]”
Screwdriver Insert BitPhillips
• Bosch reinforced screwdriver bits are designed to handle tough torque applications
• Made of the highest quality S2 tool steel for durability
• Proven sub-zero tempering process gives bits long life• Made in USA under ISO9001 standards
Item # Desc. Overall Length
Hardness
VE27021 BIT PHIL INS 000-P2 1” Extra
698
Di-Count™ Adjustable Countersink Bit
• Carbide-tipped• 2-wing• Accepts drills from 3/32" through 9/32"• Wood screw sizes #2 through #18
Item # Bevel Angle Cutting Dia. Cutting Length
Overall Length
AN20200* 45° [7/16]" - [19/32]" [7/16]" 1[¼]"
Brad Point Boring Bit70mm L, 10mm x 30mm Shank
• For drill presses only - not for use in portable drills or routers
Item # Cutting Dia. Cutting LengthAN204008* 8mm 35mm
Hinge Boring Bit57mm L, 10mm Shank, 2-Wing with Spurs
• Application: boring machines (10mm shank) and drill presses (3/8" shank)
Item # Cutting Dia.
AN203351 35mm
AN203401* 40mm
AN203355* 35mm
Metric Boring Bit
• Boring machines for shelving hardware, etc.• Use with adapters or brushings
Item # Cutting Diameter Shank Diameter OverallAN463003* 3mm 3mm 55mm
Laminate Flush TrimmersWith Euro™ Square Bearing Guide
• Designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut
• Manufactured with a non-stick Teflon® which won't mark your edge so it can be wiped clean easily
• Glue won’t stick to bearing• Beveled cutter means little or no hand filing• Will not scratch high gloss laminates• Beveled cutter can be resharpened• Replacement bearings; for bit #47148 use bearing # SQB102
Item # Radius Cutting Length
Shank Dia. Overall Length
AN47148 ¾” ⅝” ¼” 2[⅜]”
Self-Centering Vix Bit
• Saves hours of time accurately drilling holes for all hardware using screws
• All vix bits and vix-hex heads are sold in complete units that include drill guide, bit, and spring
• Precision built• Drills wood, metal, plastics, and more• Adjustable for depth
Item # Description SizeVK03 #3 Vix Bit [5/64]" dia. (for #2 & 3
screws)
VK05 #5 Vix Bit [7/64]" dia. (for #5 & 6 screws)
VK05HEX* #5 Vix-Hex Head [7/64]" dia.
VK09* #9 Vix Bit [9/64]" dia. (for #8, 9 & 10 screws)
VK09HEX* #9 Vix-Hex Head [9/64]" dia.
VK564* High Speed Bit for VK03 [5/64]"
VK764 High Speed Bit for VK05 [7/64]"
VK964* High Speed Bit for VK09 [9/64]"
699
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Super Plunge™ Router Bit1/2" Shank, 2 Flute
• Specially made plunge bit with tungsten carbide center tips
• Allows for faster and easier plunging and mortising and will stay sharper longer
• 18,000 maximum RPM for AN41452• 16,000 maximum RPM for AN41453
Item # Cutting Diameter Cutting Length Overall LengthAN41422* [½]" 1[½]' 3[⅛]"
Brad Point Boring Bit57mm L, 10mm x 27mm Shank
• For drill presses only - do not use in portable drills or routers
Item # Cutting Dia. Cutting Length
AN201005* 5mm 27mm
AN301005* 5mm 27mm
AN301008* 8mm 27mm
Solid Carbide Straight Plunge Router Bit
• • Designed for fast cutting natural exotic woods and wood composites
• Solid carbide for longer tool life and easy service
Item # CuttingDia.
CuttingLength
ShankDia.
Overall Length
AN43700* [1/8]" [7/16]" [1/4]" 2"
Carbide Tipped Counterbore Bit
• Counterbore/drill for face frame machines• Precision ground carbide-tipped counterbore
for splinter-free cutting• Will fit Evans, Ritter, Unique, Marcon and Norfield
face frame machines• Wide web design for superior strength• Replaceable HSS fishtail drills• Non-slip surface treatment for positive clamping
Item # Cutting Diameter
Counterbore Overall Length
ShankDiameter
AN424000* [⅜]" .136" 4[½]" [⅜]"
Solid Carbide Straight Plunge Router Bit
• Designed for fast cutting natural exotic woods and wood composites
• Solid carbide for longer tool life and easy service
• 2 Flute
Item # Cutting Diameter
CuttingLength
ShankDiameter
Overall Length
AN43824* [¼]" 1" [¼]" 2[½]"
Straight Plunge Router Bit1/4" Shank, Single Flute
• Single flute allows for faster feed rates, greater chip clearance and maximum stock removal
Item # Cutting Dia.
CuttingLength
Overall Length
AN45106* [¼]" [¾]" 2"
700
Straight Plunge Router Bit1/4" Shank, 2 Flute
• Solid carbide cutting edges are featured on AN45190, AN45200, AN45201, and AN45202
• Due to extreme diameter, AN45190 and AN45200 are not guaranteed, and AN45211 is not guaranteed due to its extreme length
Item # CuttingDia.
CuttingLength
Overall Length
AN45190* [1/16]" [3/16]" 1[⅝]"
AN45200* [⅛]" [7/16]" 2"
AN45202* [3/16]" [7/16]" 2"
AN45204* [¼]" [½]" 2"
AN45208* [¼]" [¾]" 2"
AN45210* [¼]" 1" 2[¼]"
AN45224* [½]" [¾]" 1[¾]"
AN45230* [¾]" [¾]" 2"
Straight Plunge Router Bit 1/2" Shank, 2 Flute
• 2 flute allows for greater balance and fine finish
• Solid carbide cutting edge featured on the AN45408• Due to extreme length, AN45415 and AN45427
are not guaranteed • 20,000 maximum RPM for AN45447• 22,000 maximum RPM for AN45449• 18,000 maximum RPM for AN45452• 12,000 maximum RPM for AN45480
Item # CuttingDia.
CuttingLength
Overall Length
AN45412* [5/16]" 1" 2[¾]"
AN45413* [⅜]" [¾]" 2[½]"
AN45415* [⅜]" 1[¼]" 3"
AN45418* [½]" 1" 2[⅝]"
AN45420* [½]" 1[¼]" 2[⅞]"
AN45422* [½]" 1[½]" 3[⅛]"
AN45426 [1/2]" 2" 4[¼]"
AN45434* [⅝]" 1[½]" 3[⅛]"
AN45433* [⅝]" 2" 3[¾]"
AN45435* [21/32]" 1[¼]" 2[⅞]"
AN45438* [¾]" 1" 2[⅝]"
AN45440 [¾]" 1[¼]" 2[⅞]"
AN45448* 1" 1[¼]" 2[⅞]"
Straight Plunge Router Bit1/2" Shank, Single Flute
• Single flute allows for faster feed rates, greater chip clearance and maximum stock removal
Item # Cutting Dia.
CuttingLength
Overall Length
AN45304* [¼]" [¾]" 2[½]"
AN45302* [⅜]" 1" 2[¾]"
AN45312* [½]" 2" 4[¼]"
Flush Trim Plunge Router BitWith Upper Ball Bearing, 2 Flute
• Very useful for template and pattern routing where the template is on top of the workpiece
• Ball bearing guide rides against the template for an exact duplication
• If used on a router table, the pattern will be on the bottom, below the workpiece
• 20,000 maximum RPM for AN45467 and AN45468
Item # CuttingDia.
CuttingLength
ShankDia.
Overall Length
AN45460 [½]" 1" [¼]" 2[½]"
AN45460S [½]" [¼]" [¼]" 1[⅝]"
AN45462* [⅝]" 1" [¼]" 2[¾]"
AN45463 [¾]" 1" [½]" 3"
AN45465 [¾]" 1[¾]" [½]" 3[¾]"
AN45468* 1[⅛]" 1[½]" [½]" 3[½]"
Mortising Router Bit 1/4" Shank, 2 Flute
• A proper mortising bit should have a large gullet between the two flutes
Item # Cutting Dia.
Cutting Length
OverallLength
AN45504* [¾]" [¾]" 2"
701
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Panel Pilot Router Bit Single Flute
• Designed for the mobile home and RV industries• Ideal for fast cut out work
Item # Cutting Dia.
Cutting Length
Shank Dia.
OverallLength
AN45506* [¼]" [¾]" [¼]" 2[½]"
Up-Shear Design Bottom Cleaning Router Bit1/2" Shank, 2 Flute
• Used for cutting or milling flat-bottom grooves or dados
• Up-shear design provides excellent finish and chip removal
Item # Cutting Diameter
Cutting Length
Overall Length
AN45564* 1" [7/16]" 2[½]"
90° V-Groove Router BitWith Upper Ball Bearings, 2 Flute
• Very useful for template and pattern routing where the template is on top of the workpiece
• Ball bearing guide rides against the template for an exact duplication
• If used on a router table, the pattern will be on the bottom, below the workpiece
• For decorative purposes, not intended for 'miter-folding', etc
• Use replacement bearing AN47701 and replacement collar AN47724
Item # Cutting Diameter
Cutting Length
Shank Diameter
Overall Length
AN45750* [½]" [½]" [¼]" 2"
Dovetail Router Bit2 Flute
• The 14º dovetail bit is designed for use with common half-blind dovetail jigs, as well as with Omnijig, Incra™, and Leigh jigs
Item # Cutting Dia.
Cutting Length
Shank Dia.
Overall Length
AN45804* [½]" [½]” [¼]" 1[¾]”
AN45806* [½]" [½]” [½]" 2[⅜]"
Core Box Router Bit2 Flute
• Use core box pattern for fluting columns and other architectural design
Item # Radius Cutting Dia.
Cutting Length
Shank Dia.
Overall Length
AN45900* [1/16]" [⅛]" [⅜]" [¼]" 1[¾]"
AN45902* [3/32]" [3/16]" [½]" [¼]" 1[¾]"
AN45906* [3/16]" [⅜]" [¼]" [¼]" 1[½]"
AN45908* [3/16]" [⅜]" [¼]" [½]" 2"
AN45912* [¼]" [½]" [⅜]" [½]" 2[⅛]"
AN45914* [5/16]" [⅝]" [7/16]" [¼]" 1[⅝]"
AN45916* [5/16]" [⅝]" [7/16]" [½]" 2"
AN45918* [⅜]" [¾]" [7/16]" [¼]" 1[¾]"
AN45924* [½]" 1" [⅝]" [¼]" 1[¾]"
702
Bowl & Tray Router Bit
• Ball Bearing Guide• 1/2” Shank• 2 Flute• Carbide Tipped
Item # Radius CuttingDiameter
CuttingLength
OverallLength
AN45990* [¼]" [¾]" [⅝]" 2[⅝]"
Spiral Plunge Router BitSolid Carbide, 2 Flute
• Spiral bits produce faster, cleaner cuts in hardwoods, plastics, Corian® and other brands of solid surface materials, etc
• ’Up-cut’ design expels chips away from the workpiece, allowing for deeper and easier mortising
• ’Down-cut’ design expels chips away from the router• Premium micro-grain carbide, increased clearance
geometry and razor-sharp cutting edges with polished flutes provides a superior finish and longer tool life
Item # CuttingDia.
CuttingLength
ShankDia.
OverallLength
AN46102* [¼]" [¾]" [¼]" 2[½]"
AN46106 [½]" 1[¼]" [½]" 3"
AN46204* [⅜]" 1[¼]" [½]" 3"
AN46206* [½]" 1[¼]" [½]" 3"
AN46207* [½]" 1[⅝]" [½]" 3[½]"
Flush Trim Router BitWith Ball Bearing Guide, 2 Flute
• For closer inside corner cutting, AN47090 and AN47092 have a 1/4" diameter; bearings not guaranteed due to size
Item # CuttingDia.
Cutting Length
ShankDia.
OverallLength
AN47090 [¼]" [½]" [¼]" 2[¼]"
AN47092 [¼]" 1" [¼]" 2[½]"
AN47100 [⅜]" 1" [¼]" 2[⅝]"
AN47102 [⅜]" [½]" [¼]" 2[⅛]"
AN47104 [½]" 1" [¼]" 2[⅝]"
AN47106 [½]" [½]" [¼]" 2[¼]"
AN47108 [½]" 1" [½]" 3[¼]"
AN47110* [½]" [½]" [½]" 2[¾]"
Compression Spiral Router BitSolid Carbide, 2 Flute
• Designed for CNC applications requiring high feed rates and a clean finish
• Particularly suitable for double-sided melamine or laminated material
• Higher quality finish than the single flute
Item # CuttingDia.
Cutting Length
ShankDia.
OverallLength
AN46190* [½]" 1[⅝]" [½]" 3[½]"
Dynabit™ Laminate Trim Router BitWith Ball Bearing Guide, 2 Flute
• Down-shear helix laminate trim bits for an excellent finish, especially in difficult materials such as melamine
• Not recommended for use in a router table
Item # Type CuttingDia.
CuttingLength
ShankDia.
OverallLength
AN47105* Flush [½]" 1" [¼]" 2[⅝]"
AN47180 Flush Helix [⅝]" [⅝]" [¼]" 2"
AN47184* 15° Bevel [¾]" [⅜]" [¼]" 2"
703
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Flush Trim Router BitWith Ball Bearing Guide, 3 Flute
• Standard replacement bearing (.500" dia.), use AN47706
• Undersized bearing (.492" dia.), use AN47715: for use after re-sharpening
Item # CuttingDia.
CuttingLength
Shank Dia.
OverallLength
AN47114 [½]" 1" [¼]" 2[⅝]"
AN47116* [½]" [½]" [¼]" 2"
AN47118* [½]" 1" [½]" 3"
Extra Long Flush Trim Router BitWith Ball Bearing Guide, 3 Flute
• Standard replacement bearing (.500" dia.), use AN47706
• Undersized bearing (.492" dia.), use AN47715: for use after re-sharpening
Item # Cutting Dia. CuttingLength
Shank Dia. OverallLength
AN47128* [½]" 1[½]" [½]" 3[⅞]"
Extra Long Flush Trim Router BitWith Ball Bearing Guide, 2 Flute
• Standard replacement bearing (.500" dia.), use AN47706
• Undersized bearing (.492" dia.), use AN47715: for use after re-sharpening
Item # Cutting Dia.
Cutting Length
Shank Dia.
OverallLength
AN47124 [½]" 1[½]" [½]" 3[⅞]"
AN47126* [½]" 2" [½]" 4[¼]"
Supertrim™ Flush Trim Router BitWith Ball Bearing Guide, 2 Flute
• Exceptional speed and super-fine finish• Furnished with steel bearing AN47714• Do not use down-shear in a router table
Item # Shear Cutting Dia.
CuttingLength
ShankDia.
OverallLength
AN47130* 3° [¾]" 1[½]" [½]" 3[⅞]"
AN47138* 3° [¾]" 2" [½]" 4[¼]"
No-File™ Router BitWith Ball Bearing Guide, 2 Flute
• Eliminates hand filing of laminates that normally follows trimming
• Specially designed to flush trim the laminate and "break" the sharp edge all in one pass
• For laminates .025-.038 thick, use AN47154• For laminates .042-.052 thick,
use AN47150 or AN47152• Use replacement bearing AN47704
Item # CuttingDia.
CuttingLength
Radius ShankDia.
OverallLength
AN47150 [½]" [⅜]" 0.059" [¼]" 1[⅞]"
AN47152* [½]" [⅜]" 0.059" [½]" 2[⅛]"
AN47154* [½]" [⅜]" .015" [¼]" 1[⅞]"
704
Router Bit Ultra-Glide™ Ball Bearing Guide
• Ultra-Glide bearing assemblies feature satin-smooth Delrin® sleeves
• Delrin® is an industrial synthetic plastic material similar to nylon and will leave no marks on the material being cut
• Applications include solid-surface materials such as Gibraltar®, SSV®, Corian®, Surell® & Fountainhead®; Plexiglas® & other clear acrylics; and plastic laminates
• Not recommended for regular wood applications due to a higher wear factor
• New Teflon® dust shields included with AN47709, AN47725, AN47726, and AN47731
Item # Hole Dia. Overall Dia. TaperAN47709* [¼]" [¾]" 0
AN47726* [¼]" [⅞]" 10°
AN47731* [¼]" [⅞]" 10°Bevel Trim Router BitWith Ball Bearing Guide, 2 Flute
• For closer inside corner cutting, AN47206 has a 3/8" diameter bearing
Item # Bevel CuttingDia.
CuttingLength
ShankDia.
Overall Length
AN47200* 15° [⅝]" [9/32]” [¼]" 1[⅞]"
AN47202* 25° [23/32]" [9/32]” [¼]" 1[⅞]"
AN47206* 25° [¾]" [7/16]" [¼]" 1[⅞]"
Overhang Trim Router BitWith Ball Bearing Guide, 2 Flute
• Used for preliminary laminate trimming, leaving a small overhang
• Reduces chipping of material caused by excessive feed-rate or vibration
• Final pass can be achieved using a standard trim bit
• Use replacement bearing AN47718
Item # CuttingDia.
CuttingLength
ShankDia.
Overall Length
Overhang
AN47192* [½]" [½]" [¼]" 2" [1/16]"
Bevel Trim Router BitWith Ball Bearing Guide, 3 Flute
• 3 flute configuration produces a very smooth cut• Solid construction reduces vibration
Item # Bevel CuttingDia.
CuttingLength
Shank Dia.
Overall Length
AN47300 23° [15/16]" [7/16]" [¼]" 1[⅞]"
AN47302* 7° [¾]" [7/16]" [¼]" 2"
Cove Router Bit With Ball Bearing Guide, 2 Flute
• The classic building blocks for many molding profiles• Use alone or in combination with beads and fillets• 18,000 maximum RPM for AN49120
Item # Radius CuttingDia.
CuttingLength
Shank Dia.
OverallLength
AN49118* [½]" 1[⅜]" [¾]" [½]" 2[½]"
705
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Router Bit Steel Ball Bearing Guide
• Bearings are double steel-shielded for extra rigidity and to inhibit dust
• A special high-performance, high-temperature grease is used for maximum life
• Solvents should not be used to clean ball bearings, as this will deteriorate the special grease
Item # Hole Dia. Overall Dia. ThicknessAN47723* [⅛]" [¼]" [7/64]"
AN47702* [3/16]" [⅜]" [⅛]"
AN47706* [3/16]" [½]" [3/16]"
AN47718* [3/16]" [⅝]" [3/16]"
AN47720* [3/16]" [¾]" [9/32]"
AN47712* [¼]" [⅝]" [3/16]"
AN47714* [¼]" [¾]" [9/32]"
AN47708* [5/16]" [⅞]" [9/32]"
AN47721* [½]" [¾]" [5/32]"
Roman Ogee Router BitWith Ball Bearing Guide, 2 Flute
• The roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee
• Curve starts at the top as a concave and fairs down into a convex curve
• Use replacement bearing AN47704
Item # CuttingDia.
Radius CuttingLength
Shank Dia.
OverallLength
AN49202* 1" [5/32]" [⅝]" [½]" 2[½]"
AN49206* 1[⅜]" [¼]" [⅞]" [½]" 2[⅝]"
Double Roman Ogee Router BitWith Ball Bearing Guide, 2 Flute
• Use replacement bearing AN47704
Item # CuttingDia.
Radius Cutting Length
ShankDia.
OverallLength
AN49210* 1" [5/32]" [⅝]" [½]" 2[½]"
Rabbet Router Bit With Ball Bearing Guide, 2 Flute
• A basic rabbeting bit• Switch to one of four optional ball bearing
guides to alter the width of cut• Use replacement bearings AN47706, AN47702,
AN47718, and AN47720
Item # Cutting Dia.
RabbetDepth
CuttingLength
ShankDia.
Overall Length
AN49302* 1[¼]" [⅜]" [½]" [½]" 2[⅜]"
Multi-Rabbet Router BitWith 6 Ball Bearings, 2 Flute
• Steps 1/16” increments from 1/8” cut width to 1/2” simply by switching ball bearing guides
• Six different ball bearings are provided
Item # CuttingDia.
RabbetDepth
CuttingLength
ShankDia.
OverallLength
AN49350* 1[⅜]" [⅛]”, [¼]", [5/16]", [⅜]", [7/16]", [½]"
[½]" [½]" 2[⅜]"
706
Chamfer Router BitWith Ball Bearing Guide, 2 Flute
• Use replacement bearing AN47704 for bits AN49400 and AN49402
• Use replacement bearing AN47706 for bits AN49404 and AN49406
• AN49404 will completely chamfer 3/4" material• AN49406 will completely chamfer 1" material• 18,000 maximum RPM for AN49406
Item # ChamferAngle
Cutting Dia.
CuttingLength
Shank Dia.
Overall Length
AN49400* 45° 1[¼]" [½]" [¼]" 2"
AN49402* 45° 1[¼]" [½]" [½]" 2[⅜]"
AN49404* 45° 2" [¾]" [½]" 2[½]"
Beading Router BitWith Ball Bearing Guide, 2 Flute
• Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass
• Use replacement bearing AN47702• 14,000 maximum RPM for AN49620
and AN49621
Item # Radius Cutting Dia.
Cutting Length
Shank Dia.
OverallLength
AN49592* [1/16]" [⅝]" [5/16]" [¼]" 1[¾]"
AN49612* [⅜]" 1[¼]" [⅝]" [¼]" 2[3/16]"
AN49618* [½]" 1[½]" [¾]" [½]" 2[⅝]"
AN49620* [¾]" 2" 1" [½]" 3[1/16]"
Stagger Tooth Plunge Cut Router Bit
• Stagger tooth design gives the greater speed and stock removal of a single flute, but with the strength and balance of 2 flute tools
Item # Cutting Dia. CuttingLength
Shank Dia. Overall Length
AN51300* [¼]" 1" [¼]" 2[¼]"
Panel Pilot Router BitSolid Carbide, 1/4” Shank, Single Flute
• Ideal laminate trimming bit for high-volume production• Solid carbide and integral pilot extend life of bit
Item # Cut Cutting Dia. CuttingLength
OverallLength
AN51200 Flush [¼]" [¼]" 1[½]"
AN51202 7° [¼]" [¼]" 1[½]"
Carbide Tipped Superabbet™ Router BitWith Ball Bearing Guide, 2 Flute
• Enables rabbet cuts from flush through 3/4" in 1/16" increments
• Particularly useful when working with large stock, or when a precise rabbet depth is required
• Supplied with a 2" diameter rabbet bit, hex key, instructions and all necessary parts for 5/8" and 3/4" depth rabbets
• 22,000 maximum RPM
Item # Cutting Dia.
RabbetDepth
Cutting Length
ShankDia.
OverallLength
AN49360* 2" [⅝]", [¾]" [⅞]" [½]" 3"
707
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Corner Rounding Router BitWith Ball Bearing Guide, 2 Flute
• Use replacement bearing AN47706• Due to extreme diameter and radius, AN49522,
AN49523, AN49524, AN49525, and AN49526 are not guaranteed; for longer tool life and smoother finish it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools
• 14,000 maximum RPM for AN49519, AN49520, AN49521, and AN49522
• 10,000 maximum RPM for AN49523, AN49524, AN49525, AN49526
Item # Radius CuttingDia.
CuttingLength
ShankDia.
OverallLength
AN49492* [1/16]" [⅝]" [5/16]" [¼]" 1[¾]"
AN49494* [1/16]" [⅝]" [5/16]" [½]" 2[¼]"
AN49496* [⅛]" [¾]" [⅜]" [¼]" 2"
AN49498* [⅛]" [¾]" [⅜]" [½]" 2[5/16]"
AN49499* [5/32]" [¾]" [⅜]" [¼]" 2"
AN49500* [3/16]" [⅞]" [½]" [¼]" 2"
AN49504* [¼]" 1" [½]" [¼]" 2"
AN49506* [¼]" 1" [½]" [½]" 2[7/16]"
AN49512* [⅜]" 1[¼]" [⅝]" [¼]" 2[3/16]"
AN49514* [⅜]" 1[¼]" [⅝]" [½]" 2[9/16]"
AN49516* [½]" 1[½]" [¾]" [¼]" 2[¼]"
AN49518* [½]" 1[½]" [¾]" [½]" 2[⅝]"
AN49520* [¾]" 2" 1" [½]" 2[⅞]"
Bullnose Radius Router Bit2 Flute
• Shape the full edge of a workpiece with a bullnose radius bit
• Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings
• 20,000 maximum RPM for AN51560• 10,000 maximum RPM for AN51564
Item # Bullnose Radius CuttingDia.
CuttingLength
Shank Dia.
Overall Length
AN51540* [⅛]" [5/64]" [17/32]" [½]" [¼]" 1[¾]"
AN51542* [3/16]" [7/64]" [19/32]" [½]" [¼]" 1[¾]"
AN51552* [3/16]" [7/64]" [19/32]" [½]" [½]" 2"
Bevel Trim Router Bit1/4" Shank, 2 Flute
• Cut, trim, and bevel laminates with one bit• Must be used with an edge or bearing
guide or fence
Item # Bevel CuttingDia.
Cutting Length
Overall Length
AN51600* 22° [13/32]" [9/32]" [15/16]"
Rip & Slotting Router BitSolid Carbide, 1/4" Shank, Single Flute
• Use for cutting sheets of laminate, paneling, and other thin material
Item # CuttingDia.
Cutting Length
OverallLength
AN51708* [¼]" [5/16]" 1[½]"
Slotting Cutter Router Bit
• Use a two-wing cutter for faster feed rates, and a three-wing cutter for better cut finish
• The AN53207 5/32" size is also used for ’biscuit-joint’ cutting
Item # Kerf Cutting Dia. BoreAN53207* [5/32]" 1[⅞]" [5/16]"
708
3 Wing Slotting Cutter Assembly
• Groove edges for T-moldings, splines or biscuits, and other purposes
• Rout tongue-and-groove joinery• Includes cutter, arbor, and ball bearing guide• The AN53407 5/32" size is also used for
’biscuit-joint’ cutting
Item # Kerf Shank Dia.AN53402* [5/64]" [¼]"
AN53406* [⅛]" [¼]"
AN53407* [5/32]" [¼]"
AN534061* [⅛]" [½]"
Classical Bead & Cove Router BitWith Ball Bearing Guide, 2 Flute
• This bead-and-cove combines the two basic forms, separating them with a fillet
• Use replacement bearing AN47706
Item # Cutting Dia.
CuttingLength
Shank Dia. OverallLength
AN54102* 1[¼]" [½]" [¼]" 2"
AN54108* 1[½]" [⅝]" [½]" 2[½]"
Ogee Fillet Router BitWith Ball Bearing Guide, 2 Flute
• This ogee pattern has a step at the end of the concave portion of the curve
• Standard 1/2" bearing AN47706 included• Optional 3/8" bearing AN47702
can be ordered separately
Item # Cutting Dia.
CuttingLength
Shank Dia.
Overall Length
AN54112* 1[⅜]" [½]" [½]" 2[½]"
AN54114* 1[⅝]" [¾]" [½]" 2[⅝]"
Classical Molding Router BitWith Ball Bearing Guide, 2 Flute
• A double quarter-round is produced by this bit• Standard 1/2" bearing AN47706 included• Optional 3/8" bearing AN47702 can
be ordered separately
Item # CuttingDia.
Radius CuttingLength
ShankDia.
Overall Length
AN54140* 1[⅛]" [5/32]" [½]" [½]" 2[⅜]"
Classical Cove & Bead Router BitWith Ball Bearing Guide, 2 Flute
• The positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing
• Standard 1/2" bearing AN47706 included• Optional 3/8" bearing AN47702 can be
ordered separately
Item # CuttingDia.
CuttingLength
Shank Dia. OverallLength
AN54134* 1[⅜]" [11/16]" [½]" 2[9/16]"
Corner Beading Router BitWith Ball Bearing Guide, 2 Flute
• Particularly suitable for antique reproductions and restoration projects
• For AN54160 use replacement bearing AN47706• Others use replacement bearing AN47716
Item # Radius CuttingDia.
Bead CuttingLength
ShankDia.
Overall Length
AN54160* [⅛]" [⅞]" [¼]" [9/16]" [¼]" 2[⅛]"
AN54164* [3/16]" 1[⅛]" [⅜]" [11/16]" [¼]" 2[¼]"
AN54166* [3/16]" 1[⅛]" [⅜]" [11/16]" [½]" 2[⅝]"
AN54170* [¼]" 1[¼]" [9/16]" ¾]" [½]" 2[⅝]"
709
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Edge Molding Router BitWith Ball Bearing Guide, 2 Flute
• Use replacement bearing AN47706
Item # Cutting Dia.
Radius CuttingLength
ShankDia.
OverallLength
AN54322* 1[¼]" [5/32]" [⅞]" [½]" 2[¾]"
Drawing Line Router BitWith Ball Bearing Guide, 2 Flute
• Use replacement bearing AN47716
Item # CuttingDia.
BeadRadius
CuttingLength
ShankDia.
Overall Length
AN54354* 1" [5/32]" [⅞]" [½]" 2[¾]"
Carbide-Tipped Countersink BitFor Wood Screws, 2 Wing
• Includes 3" long slow-spiral drill bit• Replacement set screws (2 required) AN67092
Item # Pilot Bit CuttingDia.
CuttingLength
ShankDia.
OverallLength
AN55200* [3/32]" [⅜]" [½]" [5/16]" 1[½]"
AN55202 [⅛]" [⅜]" [½]" [5/16]" 1[⅝]"
AN55204 [9/64]" [⅜]" [½]" [5/16]" 1[⅝]"
AN55206* [5/32]" [⅜]" [½]" [5/16]" 1[⅝]"
AN55208* [11/64]" [⅜]" [½]" [5/16]" 1[⅝]"
AN55210 [3/16]" [⅜]" [½]" [⅜]" 1[¾]"
2-Piece Stile & Rail SetFor 1" Materials
• Includes two complete assemblies consisting of cutters, arbors, bearings, etc
Item # Type CuttingDia.
Radius CuttingLength
ShankDia.
Overall Length
AN55430* Ogee 1[⅝]" [¼]" 1[1/16]" [½]" 3[5/16]"
Solid Surface Undermount Bowl Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute
• Undermount Application (all tools): decorative, finished edges for ’undermount’ type bowls; among others can be used for Corian® sink & bowl #’s 802S, 804S, 805S, 809S, 810S, and 871S
• Bevel Mount Application (AN57122 only): Among others, can be used for Corian® sink & bowl #’s 804A, 805A, 830A, 852LA, 852RA, and 854RA
Item # Type Angle CuttingDia.
CuttingLength
Overall Length
AN57128 Roundover 18° 2[⅛]" 1" 3"
AN57122* Bevel 10° 1" [15/16]" 3"
AN57158* Roundover 14° 2" [11/16]" 2[½]"
AN57160* Roundover 10° 2[⅛]" 1" 2[⅞]"
AN57168* Bevel 10° 1[¼]" 1" 3"
710
Solid Surface Countertop "No-Drip" Router Bit2 Flute
• Use this bit to cut a ’no-drip’ edge for kitchen and vanity countertops
• Use with 5/16" radius corner rounding bits
Item # Material Thickness
CuttingDia.
Cutting Length
ShankDia.
Overall Length
AN57148* [¾]" 1" [½]" [½]" 2[⅛]"
Solid Surface Topmount Router BitEuropean Type, 2 Flute
• Ideal for sink cut-outs and for preparing counter-tops for topmount installation of sink or bowl
• Among others, can be used for Corian® sink & bowl #'s 830A, 852RA, 852LA and 854RA
Item # Type CuttingDia.
CuttingLength
ShankDia.
OverallLength
AN57132* 15° Bevel [29/32]" [15/16]" [½]" 2[½]"
Solid Surface Corner Rounding Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute
• 5/16" radius can be used with counter-top bits and for general purpose edge ornamentation
• The other sizes can be used for decorative edge treatment or with round-under bits to achieve a full 180° bullnose
• Furnished with Ultra-Glide™ non-marring Delrin® sleeved ball bearing guide
• Includes AN5000 1/8" hex key• Use replacement Ultra-Glide™
bearing assembly AN47707
Item # Radius CuttingDia.
CuttingLength
Shank Dia.
OverallLength
AN57150* [5/16]" 1[⅛]" [½]" [¼]" 1[⅞]"
AN57152* [5/16]" 1[⅛]" [½]" [½]" 2[¼]"
Solid Surface Bowl & Sink Trim Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute
• Using a template, the first tool (over-hang) will ’rough-out’ the sink cut-out and the second tool (flush trim) will finish the cut
• Furnished with Ultra-Glide™ non-marring Delrin® sleeved ball bearing guide
• For bit AN57153 use replacement Ultra-Glide™ bearing assembly AN47726 and for bit AN57154 use bearing assembly AN47709
Item # Type CuttingDia.
CuttingLength
ShankDia.
OverallLength
AN57153* [1/16]"Overhang
[¾]" 1" [½]" 3[¼]"
AN57154 Flush Trim [¾]" 1" [½]" 3[½]"
Solid Surface Long Ogee Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute
• Use replacement Ultra-Glide™ bearing assembly AN47707
Item # CuttingDia.
CuttingLength
ShankDia.
OverallLength
AN57246* 1[¾]" 1[¼]" [½]" 3[¼]"
Solid Surface Chamfer Solid Router Bit With Ultra-Glide™ Ball Bearing Assembly, 2
Flute
• Use replacement Ultra-Glide™ bearing AN47707• 12,000 maximum RPM for AN57258
Item # CuttingDia.
Angle CuttingLength
ShankDia.
Overall Length
AN57220* 2" 45° [¾]" [½]" 2[⅝]"
711
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Insert Flush Trim Router BitWith Ball Bearing Guide, 2 Flute
• The RC-1000 has four cutting edges per knife• The RC-1004 has two cutting edges per knife• Torx® key included• Use replacement bearing #47711 and • replacement screws #67115
Item # CuttingDia.
Cutting Length
Shank Dia.
Overall Length
ANRC1000* [¾]" [15/32]" [¼]" 2[⅛]"
Vaso Sink Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute
• Undermount Application: decorative, finished edges for Corian® Vaso sinks
Item # Type Radius CuttingDia.
CuttingLength
ShankDia.
AN57170* Roundover [⅜]” [½]” 1” [½]”
Forstner Pattern Router Bit 2 Wing
• High carbon tool steel• For drilling pocket-holes, flat-bottom holes, etc.
using any 3/8" or larger portable drill or stationary drill press
• Forstner pattern bits are well known for their ability to drill clean and chip-free holes in wood
• Amana Tool® uses only the finest quality tool steel, precision machined and ground on state-of-the-art equipment
• Large gullets milled in the tool body provide exceptional chip clearance
Item # Cutting Diameter
ShankDiameter
OverallLength
ANFO095* [3/8]" [3/8]" 3[1/2]"
Hinge Boring Bit57mm L, 3/8" Shank, 2 Wing
• For use with drill presses only, right hand rotation• Economical alternative to other 35mm hinge bits
Item # Cutting Dia.ANEB351* 35mm
Heavy-Duty Carbide-Tipped Shaper CutterCorner Round, 1-1/4" Bore
• 3-wing• Counter-clockwise rotation:
wood face-down
Item # Radius CuttingDepth
Diameter
ANA30102* [3/16]" [7/16]" 4"
Insert Bevel Trim Router BitWith Ball Bearing Guide, 2 Flute
• Four cutting edges per knife• Torx® key included• Use replacement bearing AN47712
and replacement screws AN67115
Item # Bevel Cutting Dia.
CuttingLength
Shank Dia.
OverallLength
ANRC1008* 15° [13/16]" [7/16]" [¼]" 2[¼]"
ANRC1010 25° [31/23]" [7/16]" [¼]" 2[¼]"
ANAMA12* - - - - -
Allen-Type Flat Set Screw
• Case hardened• Black-oxide finish
Item # Description Use w/ Key SizeAN67092* #10-24 NC [3/32]"
712
Euro-Rip Ripping Saw Blade20° Hook
• Designed for ripping natural woods, along the grain
• Anti-kickback fingers maintain safety while limiting chip thickness, allowing for a faster, quieter cut
• Minimal feed effort is required• Cooling slots in the saw body
prevent excessive heat build-up
Item # Dia. Teeth Grind Kerf Plate BoreANRB1020* 10" 20 FT .126" 0.087 [5/8]"
General Purpose Cut-Off Saw Blade10° Hook
• For general trimming and cross-cutting of natural woods, plywood, composition material and single or double-sided plastic laminated material
Item # Dia. Teeth Grind Kerf Plate BoreAN61060130* 10" 60 TCG .126" .087" 30mm
AN61272130* 12" 72 TCG .126" .087" 30mm
AN612721* 12" 72 TCG .126" .087" 1"
Cut-Off & Cross-Cut Saw Blade10° Hook
• For general cut-off, cross-cutting and trimming of natural woods
Item # Dia. Teeth Grind Kerf Plate BoreAN610600* 10" 60 ATB .126" .087" [5/8]"
Solid Surface Saw Blade0° Hook
• Designed for cutting double-sided plastic laminate, Plexiglas® and solid-surface materials such as Dupont®, Corian®, Wilsonart®, Gibraltar® & SSV®, Fountainhead, etc
• Suitable for table saws & radial arm and similar type machines due to 0° hook angle
Item # Dia. Teeth Grind Kerf Plate BoreAN610721 10" 72 MTC .126" .095" [5/8]"
AN610721-30* 10" 72 MTC .126" .095" 30mm
AN612841* 12" 84 MTC .126" .095" 1"
Fine Cross-Cut & Cut-Off Saw Blade10° Hook
• Designed for trimming and single or double-sided veneered and plastic laminated panels
Item # Dia. Teeth Grind Kerf Plate BoreAN686401* 8" 64 TCG .118" .079" [⅝]"
AN610801* 10" 80 TCG .126" .087" [⅝]"
Double-Face Melamine & Laminate Saw Blade6° Negative Hook
• Specifically designed to cut melamine chip-free on both sides
• Features increased thickness of plate for added stability, and special ’high-ATB’ grind for extremely smooth cuts
• Easily re-sharpened
Item # Dia. Teeth Grind Kerf Plate Bore
ANMB86400* 8" 64 H-ATB .110" .087" [⅝]"
ANMB10800 10" 80 H-ATB .110" .087" [⅝]"
ANMB12960* 12" 96 H-ATB .110" .087" 1"
713
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Plywood & Plastic Cutting Saw BladePositive Hook
• Blade produces quality cuts when sizing plywood and other sheet goods with a portable circular saw
• Used for cutting plastics
Item # Dia. Teeth Grind Kerf Plate BoreANPC620* 7[¼]" 40 TCG .120" .078" [⅝]" Univ.
Dado Saw Blade Set
• For cutting grooves or dados from 1/8" through 13/16"
• Set consists of two outside saw blades and four inside chippers
• Outside saw blades feature hollow- ground plates for proper clearance and alternate top bevel (ATB) grind with every sixth tooth flat ground (FT)
• 8" diameter sets have 5° negative hook angle for smoother cuts
• AN658040: 8" x 46T set for super smooth cuts in cabinet grade plywoods and melamine
Item # Dia. Teeth Grind Kerf Range BoreAN658030* 8" 24 ATB/FT [⅛]" - [13/16]" 1"
AN658040* 8" 46 ATB/FT [⅛]" - [13/16]" [⅝]"
Taper Point Drill BitGeneral Purpose
• Cuts wood and plastic in one operation for the thread and shank of wood screws
• Wood screw size: 8• Steel
Item # FluteLength
Overall Length
Material Drill Dia.
FU20100140 1[¾]" 2[⅞]" Steel [9/64]
FU20100156* 2" 3[⅛]" Steel [9/64]
FU20100171 2[⅛]" 3[¼]" Steel [11/64]
FU20100187* 2[5/16]" 3[½]" Steel [11/64]
High Speed Steel Hole Saw Arbor
• 3/8" hex shank with 2 pins• Fits sizes 1-1/4" to 6"• Comes complete with pilot drill
Item # Shank Size No. of Pins Fits Sizes
Material
FU58000008* [⅜]" Hex 2 1[¼]" - 6" Steel
Carbide Tipped Hole Saw
• Designed for abrasive materials such as fiberglass and particleboard
• 1-7/8" cutting depth• 3 teeth per inch and carbide tipped
to resist abrasion• Not recommended for ferrous metals,
but will outlast high speed steel hole saws in applicable jobs
Item # Size Carbide GritFU58602000* 2" HLS200
Standard Type Plug Cutter4 Flute
• Chamfered plug for easy starting in counterbored hole
Item # ShankDia.
Plug Size Max.Length
FUPC38* [¼]" [⅜]" [½]"
714
Type C Countersink
• 82° included angle (bit not included)• To cut wood and plastic for heads of wood screws• Set of 7 countersinks comes in wood
holder and includes C5, C6, C7, C8, C9, C10 and C12 for #5-12 wood screws
Item # Cutting Dia. Drill Hole Size Overall LengthFUC04 [5/16]" [7/64]" [⅞]"
FUC05 [⅜]" [⅛]" [⅞]"
FUC06 [⅜]" [9/64]" [⅞]"
FUC07* [⅜]" [5/32]" [⅞]"
FUC08 [⅜]" [11/64]" [⅞]"
FUC09 [⅜]" [3/16]" [⅞]"
FUC99* Assorted Assorted Assorted
Stop Collar
• Held solidly in place with two set screws• Inside diameter fits outside diameter of the
Countersink of Counterbore
Item # Inside Dia.FUSC38* [⅜]"
Orbital Sander
• Self-Generated Vacuum System: Designed to work with 3M’s proprietary Clean Sanding self- contained dust collection system to trap and contain airborne particles during the finishing process
• Central-Vacuum: Easily attaches and detaches to your existing central vacuum system for efficient evacuation of dust and debris
• Non-Vacuum: Powerful .28 horsepower; designed to meet or exceed the highest performance standards
• Precision balanced, designed for smooth operation• 12,000 RPM
Item # SizeMM203317* 3” x 4”
Random Orbital Sander
• 3M(TM) Electric Random Orbital Sander Kit 28526 contains 3 items:
• 6 in Non-Vacuum (2.5mm), 3/16 in Orbit Sander 28429, features a whisper quiet 30 volt brushless DC motor with three speed options, an alloy steel variable speed curved throttle lever, 3M gripping material molded into the interchangeable comfort grip, built-in wrist support, conveniently located speed controls, 3M Stikit(TM) Disc Pad 20354 included
• Kit also includes a 3M(TM) Power Cord 28434 (Low Voltage, 18AWG, 12 feet, UL approved) and a 3M(TM) Power Supply with AC Power Cord 28436 (AC input 100-240 volt, Full Range, DC output 30 volt, 5 amp, features removable side bumpers and pre-drilled mounting flange, UL approved)
• 3M(TM) AC Power Cord 28478 (Three Prong, 110 volt, UL ap-proved) is also sold separately.
• New image is forthcoming
Item # Size StrokeMM203195* 5” [3/16]”
MM203270* 6” [3/16]”
MM203171 5” [3/16]”
MM203256* 6” [3/32]”
MM285269 6” [3/16]”
MM204529 Large -
MM203386* Fits all 3M conversion kits -
3M™ Clean Sanding Hookit™System Accessories
• Whatever your application, 3M™ is sure to have an accessory to allow you to maximize your sanding productivity
Item # Description Pack Qty.MM204437* 5” - 31 Hole Hook Saver 20