Pyroelectric Infrared Sensors - Farnell element14Pyroelectric Infrared Sensors Cat.No.S21E-5 Murata...

Pyroelectric InfraredSensors

Cat.No.S21E-5

MurataManufacturing Co., Ltd.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note S21E.pdf08.10.22

for EU RoHS Compliant • All the products on this catalog are complied with EU RoHS. • EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use

of Certain Hazardous Substances in Electrical and Electronic Equipment". • For more details, please refer to our website 'Murata's Approach for EU RoHS'

(http://www.murata.com/info/rohs.html).




CONTENTS

SMD-Dual Type Pyroelectric Infrared Sensor IRS-A200ST01 Series

Dual Type Pyroelectric Infrared Sensor IRA-E700 Series

Quad Type Pyroelectric Infrared Sensor IRA-E900 Series

Quad Type Pyroelectric Infrared Sensor IRA-E940ST1 Series

Temperature Compensation Single Type Pyroelectric Infrared Sensor

IRA-E420 Series

2

3

4

5

6

7

9

12

16

1

2

3

4

5

Fresnel Lens

Notice

Pyroelectric Infrared Sensor IRA/IRS Series Characteristics Data

Part Numbering

Recycled Paper

HIC® in this catalog are the trademarks ofMurata Manufacturing Co., Ltd.

1

2

3

4

5







2

o Part Numbering

Pyroelectric Infrared Sensor

1Product ID

2Type

3Characteristics

4Individual Specification Code

* Part Number shows only an example which might be differentfrom actual part number.* "3Characteristics" and "4Individual Specification Code" mighthave different digit number from actual Part Number.

(Part Number) IR S- A200ST 01

1 2 3 4

-R1

5




1

3

Part Number

Responsivity (500K, 1Hz, 1Hz)

Field of View

Optical Filter

Electrode

Supply Voltage

Operating Temperature

Storage Temperature

3.8mVp-p (Typ.)

±50°

5µm long-pass

(2.5Z0.55mm)Z2

2 to 15V

-40 to 70D

-40 to 85D

IRS-A200ST01

SMD-Dual Type Pyroelectric Infrared Sensor IRS-A200ST01 Series

Pyroelectric Infrared Sensors for Reflow Soldering

SMD type Pyroelectric infrared sensors, IRS series, exhibithigh sensitivity and reliable performance made possible byMurata's ceramic technology and packaging technologydeveloped over many years.IRS-A200ST01 series realizes cost benefits and higherperformance with a new improved material of infraredceramics.

! Features1. High sensitivity and excellent S/N ratio2. High stability to temperature changes3. 240°C peak Reflow soldering is available.4. High immunity to external noise (Vibration, RFI etc.)5. Higher in cost-performance

! Applications1. Security2. Lighting appliances3. Household or other appliances

!Rating (25˚C)

! Dimensions & Circuit Diagrams

g

sRG

d

0.55 0.55 0.55(in mm)

2.5

3.8

5.76.5

0.8 4.3

GND

4.8

2.5

6.7

4-0.

8

0.550.550.55

1.4

2.0

1.4

2.6

01

x

Optical Filter Pyro-Element

Out put terminal(Vout)

Power Supply Terminal (Vin)

General tolerance: ±0.2(in mm)

[ Top view ] [ Bottom view ]




2

4

Dual Type Pyroelectric Infrared Sensor IRA-E700 Series

Pyroelectric Infrared Sensors

Pyroelectric infrared sensors, IRA series, exhibit highsensitivity and reliable performance made possible byMurata's ceramic technology and Hybrid IC techniqueexpertise developed over many years.IRA-E700 series realizes cost benefits and higherperformance with a new infrared sensor element ofimproved material parameters and fabrication.IRA-E700 series is available in two types.IRA-E710ST0 has enhanced immunity to RFI (RadioFrequency Interference).

! Features1. High sensitivity and excellent S/N ratio2. High stability to temperature changes3. Slight movement can be detectable.4. High immunity to external noise (Vibration, RFI etc.)5. Custom design is available.6. Higher in cost-performance


!Rating (25˚C)


g

sRG

d

g

sRG

d

5.0±0.05 ∗

d s

g

9.2

4.7±0.1

3.7±

0.1

11.0

±2φ0.45±0.05

4.7

45°

45°3.

6

1.0 1.0 1.0

2.0

Pyroelectric element

IRA-E700ST0

(in mm)

∗ Specified on the bottom of stem

General Tolerance : ±0.2

(in mm)

IRA-E710ST0

Part Number


Field of View

Optical Filter

Electrode

Supply Voltage


Storage Temperature

4.3mVp-p (Typ.)

θ1=θ2=45°

5µm long-pass

(2.0Z1.0mm)Z2

2 to 15V

-40 to 70D

-40 to 85D

IRA-E700ST0 IRA-E710ST0




3

5

Quad Type Pyroelectric Infrared Sensor IRA-E900 Series


Pyroelectric infrared sensors, IRA series, exhibit highsensitivity and reliable performance made possible byMurata's ceramic technology and Hybrid IC techniqueexpertise developed over many years.IRA-E900 series realizes cost benefits and higherperformance with a new infrared sensor element ofimproved material parameters and fabrication.IRA-E900 series is available in two types.IRA-E910ST1 has enhanced immunity to RFI (RadioFrequency Interference).

! Features1. High sensitivity and excellent S/N ratio2. High stability to temperature changes3. Slight movement can be detectable.4. Non directional sensing with wide F.O.V.5. High immunity to external noise (Vibration, RFI etc.)6. Custom design is available.7. Higher in cost-performance


! Rating (25˚C)


5.08±0.05∗

d s

g

1.1 1.0 1.1

9.2

4.7±0.1

1.1

1.0

1.1

g

s

RG

YWWYYWWY

WYYW

WYYW

d

g

s

RG

YWWYYWWY

WYYW

WYYW

d

11.0

±2φ0.45±0.05

4.7

41°

3.6

41°


IRA-E900ST1

(in mm)

(in mm)

IRA-E910ST1


General Tolerance : ±0.2Part Number


Field of View

Optical Filter

Electrode

Supply Voltage


Storage Temperature

3.3mVp-p (Typ.)

θ1=θ2=41°

5µm long-pass

(1.1Z1.1mm)Z4

3 to 15V

-25 to 55D

-40 to 85D

IRA-E900ST1 IRA-E910ST1




4

6

Quad Type Pyroelectric Infrared Sensor IRA-E940ST1 Series


Pyroelectric infrared sensors, IRA series, exhibit highsensitivity and reliable performance made possible byMurata's ceramic technology and Hybrid IC techniqueexpertise developed over many years.IRA-E940ST1 realizes cost benefits and higher performancewith a new infrared sensor element of improved materialparameters and fabrication.IRA-E940ST1 which has quad elements and 2 outputs willdetect the human body more correctly with OR/AND logiccircuit.

! Features1. High sensitivity and excellent S/N ratio2. High stability to temperature changes3. High immunity to external noise (Vibration, RFI etc.)4. Higher in cost-performance5. Custom design is available.


! Rating (25˚C)


5.08±0.05∗

s1 d

s2g

1.0 0.8

(Y) W

(Y) W

Y (W)

Y (W)

1.0

9.2

4.7±0.1

1.35

0.3

1.35

RG

RG

s1

d

s2

g

11.0

±2φ0.45±0.05

4.7

55°

3.6

50°


(in mm)

(in mm)


General Tolerance : ±0.2

Part Number


Field of View

Optical Filter

Electrode

Supply Voltage


Storage Temperature

3.3mVp-p (Typ.)

θ1=55°, θ2=50°

5µm long-pass

(1.35Z1.0mm)Z4

2 to 15V

-25 to 55D

-40 to 85D

IRA-E940ST1




5

7

(IRA-E420SW1)! Dimensions & Circuit Diagrams

(IRA-E420S1, IRA-E420QW1)

1.5

max

.

9.2

3.6 4.

5

d s

g

5.08±0.05∗

ø0.45±0.05

50°

11±2

3.0±0.1

5.08±0.05∗

d s

g

11.0

±2

ø0.45±0.05

4.9

9.2

2.4±0.1

17°

17°

3.6

1.8Pyroelectric element

1.6Pyroelectric element

RGs

g

d

(in mm)

Temperature Compensation Single Type Pyroelectric Infrared Sensor IRA-E420 Series


Single type pyroelectric infrared sensors IRA-E420 serieshave a temperature compensation element.They are suitable for flame detection and gas detection.

! Features1. High stability against abrupt ambient temperature changes2. High immunity to external noise (Vibration, RFI etc.)3. Custom design is available with varying optical filter.

! Applications

Part Number

IRA-E420S1

IRA-E420QW1

IRA-E420SW1

Silicon

4.30µm band-pass

4.45µm band-pass

1-15µm infrared detection

Flame detection

Flame detection

Optical Filter Applications

(in mm)


General Tolerance : ±0.2(in mm)


General Tolerance : ±0.2(in mm)




5

8

! Rating (25˚C)

* 700K, 5Hz, 1Hz

Part Number


Field of View

Optical Filter

Electrode

Supply Voltage


Storage Temperature

3.4mVp-p (Typ.)

Silicon

-25 to 70D

IRA-E420S1

1.3mVp-p (Typ.)*

4.3µm band-pass

-25 to 55D

IRA-E420QW1

θ1=θ2=17°

ø1.6mm

3 to 15V

-30 to 100D

0.45mVp-p (Typ.)

θ1=θ2=50°

4.45µm band-pass

ø1.8mm

-25 to 70D

IRA-E420SW1




5

9


! Spectral Response of Window Materials

! Frequency Characteristics

2.5

4000 3500 3000 2500 2000 1800

Wave number (cm-1)

Tra

nsm

ittan

ce (

%)

Wave length (µm)

4.3µm Band-Pass Filter

7µm Long-Pass Filter

Silicon Filter

1600 1400 1200 1000 800

100

0

20

40

60

80

3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0

5µm Long-Pass Filter

1.0

Chopping Frequency (Hz)

Rel

ativ

e R

espo

nsiv

ity (

RV

)

1

10

10




5

10


! Test Method of Sensitivity

140mm

Black Body

500K*1

Mechanical Chopper1Hz*1

Infrared Sensor

Oscilloscope

g

s

47kΩ

W22µF

d

W5V

Lock-in Amplifier (1Hz)

D

g

B102K LM358330k B222K

260k 100k 4 8

1CB103K

R

5

2

6

7

3

100k

2SD596

µPD5555G

100k

1k

Photo Coupler

Relay

220k

220k

NJM2903M

330k

3.3µ16V

10µ16V

100k

100k

S

B102K

100k120k

4.7µ16V

1

120k B102K

10M

10M

B222K

1S184 B102KW

W

WW

10µ16V

LM358

1S184

100µ16V

100µ16V

9Y15

GND

78L05

3 Terminal Regulater

TH=1.1ZC (µF) Z R (MΩ) second

W

W W

! Typical Application Circuit (Human Detection)

*1 IRA-E420QW1

IRA-E420SW1

IRA-E700/E900 SeriesIRS-A200ST01 Series

700K

400K

500K

Black Body

5Hz

2.5Hz

1Hz

Mechanical Chopper




5

11


After test completion, leave for three hours in

normal humidity temperature conditions, and

then measure.

1. External appearance:

No significant damage

2. Sensitivity:

Tolerance within 20% deviation from original

value

3. Noise:

Maximum tolerance W100mV of original value

No generation of bubbles

! Reliability TestIRS-A200ST01 series, IRA-E700 series, IRA-E900 series

IRA-E420 series

Item

High Temperature

Low Temperature

Humidity

Heat Cycle

Vibration

Shock

Soldering Heat

Hermetic Sealing

100D for 500 hrs.

Y40D for 500 hrs.

60D, 95% RH for 500 hrs.

20 times of following cycle.

Y25D, 30 min.eRoom temp., 30 min.h

gRoom temp., 30 min.f55D, 30 min.

Apply vibration of amplitude of 1.5mm with 10 to 55Hz band to each of 3

perpendicular directions for 60 min.

Apply shock of 100G sinewave by standard shock tester to each of 3

perpendicular directions.

Immerse up to 3.0mm from can case in solder bath of 260T5D for 10T1 s.

Conform to MIL-STD-202F chapter 112D, condition D.

Immerse in fluorocarbon bath (FC-40) of 125T5D for 20 s.

Test Conditions Criteria

Item

High Temperature

Low Temperature

Humidity

Heat Cycle

Vibration

Shock

Soldering Heat

Hermetic Sealing

100D for 500 hrs.

Y30D for 500 hrs.

60D, 95% RH for 500 hrs.

20 times of following cycle.

Y25D, 30 min.eRoom temp., 30 min.h

gRoom temp., 30 min.f55D, 30 min.

Apply vibration of amplitude of 1.5mm with 10 to 55Hz band to each of 3

perpendicular directions for 60 min.

Apply shock of 100G sinewave by standard shock tester to each of 3

perpendicular directions.

Immerse up to 3.0mm from can case in solder bath of 260T5˚C for 10T1 s.

Conform to MIL-STD-202F chapter 112D, condition D.

Immerse in fluorocarbon bath (FC-40) of 125T5D for 20 s.

Test Conditions

After test completion, leave for three hours in

normal humidity temperature conditions, and

then measure.

1. External appearance:

No significant damage

2. Sensitivity:

Tolerance within 20% deviation from original

value

3. Noise:

Maximum tolerance W100mV of original value

No generation of bubbles

Criteria




5

12

m3.0

2.0

1.0

0

1.0

2.0

3.0 1.0 2.0 3.0 4.0 5.0 m

1.0 2.0

7.7m

29.6R

9m

10m

9m

7.7m

2m

1m1.6m

3.5m 10m

12°

3.0 4.0

BB' A

CC'

C'

C'B'

B'

BD

BC

C

D'

D'

D

A

A

D, D'

E, E'

30°

22.5°

5.0 m

m4.0

3.0

2.0

1.0

0

Horizontal Area Vertical Area

Horizontal Area Vertical Area

Sensor

29.6R

0.7max.

810

21.5

44.5

Lens plane

Sensor

16.3

C

DD

'

EE

'

BA

B'

C'

2.24

11.6

4 R

3.60

6.4

5.0

3.64

Cross-Sectional View

E'

E16.0

φ21.0

φ20.0

51.5

56.5

(in mm)

(in mm)

PPGI0601

PPGI0902

Pyroelectric Infrared Sensors/Fresnel Lens




5

13

16.5

6

12.9SR

Y

C12 C2

C11 C3

C1

C10X

C9 C5

C4 Z

0.8m

2.2m

2.5m

0.5m

YY

32

10

12

3

C

(m)

BA

BC

A : 0°B : 21.8°C : 48°

C8 C6

C7

B1

B4

B5

B6

B3

B2

12.1SR

3

3.6

Pyr

oele

ctric

elem

ent

2 3

φ23T0.2

φ21.4

φ19.4

A

B

C

Detection area on the floor

B : 60° pitch C : 30° pitch

(in mm)

PPGI0626


1) Insert a sensor into Fresnel lens like each tab is overlapped.(In case there are two tabs on Fresnel lens, the field of view is determined by your choice (TabA or B on Fresnel lens).Please see following page(s) for more details to see which characteristic of field of view is preferable for your application.)

2) Push the sensor into Fresnel lens until the top face of sensor reaches to the stopper inside Fresnel lens.

3) Please prepare a housing yourself that is put onto Fresnel lens as shown in FigureA. The hatching area shown in Figure A, must be obscured by the housing in order to prevent mis-detection. Unless otherwise unexpected infrared ray comes though the hatching area.

4.5

Tab

5.7

8.65

4.05.

5

1.15

ø9.0

5.2 5.7

R4.8

3.01.15

4.353.

4

Pyro-Element

Step

ø8.2

(in mm)General tolerance : ±0.2

Housing

9.15

(4.3

5)

Figure A

13º13º (4.5)

*Assembled with Murata sensor IRA-E700 series

Horizontal

10.8

m35

º35

º

0m

6m

6m

Vertical

1.8m

5m

0m

2m

2m

IML-0635




5

14






Housing

9.15

(4.3

5)

Figure A

13º13º (4.5)

4.5

Tab0.5

0.5

8.65

ø9.0

ø10.4

3.4

0.5

Focal point (Pyro-Element)

Step

ø8.2

Horizontal

5.54

m


6.6m

19.3

º19

.3º

19.3

º19

.3º

0m

4m

4mVertical

5m

0m

3m

3m

Freshel lens are available upon request.

IML-0636





Housing

9.15

(4.3

5)

Figure A

13º13º (4.5)

4.5

Tab0.5

0.5

8.65

ø9.0

ø10.4

3.4

0.5

Focal point (Pyro-Element)

Step

ø8.2


Horizontal Vertical

1.8m

5m

0m

2m

2m

2.7m

5m

0m

2m

2m

IML-0637




4.5

Tab

5.7

8.65

4.05.

5

1.15

ø9.0

5.2 5.7

R4.8

3.01.15

4.353.

4

Pyro-Element

Step

ø8.2


Housing

9.15

(4.3

5)

Figure A

13º13º (4.5)

6.11m

4.91m

3m

3m

0m

Vertical

3m

On the Floor

3m

45.5°

3m0m

45.5°

42°

42°

Horizontal

Vertical

Pyroelectric ElementHorizontal

Assembled with Murata sensor IRA-E700 Series.

IML-0638

5

15




86.7

2.75

5.279

4.4

6.79

5.2

(0.19)

68

(1.0

25)

(C1.4)(O

0.85

)

R1

R0.3

4-R1-754-C1.25

Please see following age(s) for more details to see which characteristic of field of view is preferable for your application.)Push the sensor into Fresnel lens until the top face of sensor reaches to the stopper inside Fresnel lens.

(in mm)

General tolerance : ±0.2

・Horizontal Vertical

3m

0m

3m

3m

3m

0m

3m

3m

IML-0642

9

(5.0

09)

(7.7

6)

7.16

2.75

A

A

R5.15

SR6

ø9

20.

6

ø95000

Side View Front View

(5279)

(1723)

(8780)

(5224)

(1475)

(269

4)

(223

4)

(337

0)

(875

8)

(82.

43°)

(62.

47°)

IML-0658

Please see following age(s) for more details to see which characteristic of field of view is preferable for your application.)Push the sensor into Fresnel lens until the top face of sensor reaches to the stopper inside Fresnel lens.

(in mm)

General tolerance : ±0.2

・


16




Notice

1. Caution (Design)(1) Please make sure that your product has been evaluated

and confirmed against your specifications when ourproduct is mounted to your product.

(2) Be sure to provide an appropriate fail-safe function onyour product to prevent a second damage that may becaused by the abnormal function or the failure of ourproduct.

(3) In case of outdoor use, suitable optical filter and waterand humidity proof structure should be applied.

(4) To prevent failure or malfunction, please use a stabilizedpower supply.

(5) Please avoid using the sensor in the following conditionsbecause it may cause failure or malfunction.(a) in such a fluid as water, alcohol etc. corrosive gas

(SO2, Cl2, NOX etc.) or sea breeze(b) in high humidity(c) in a place exposed directly to sunlight or headlights of

automobile(d) in a place exposed to rapid ambient temperature

change(e) in a place exposed directly to an air-conditioner or

heat vent(f) strong vibrations(g) in a place exposed to strong electromagnetic field(h) in such a place where infrared ray is shaded(i) in any other place similar to the above (a) through (h)

2. Caution (Mounting)(1) Soldering

(a) Hand soldering should be applied.

(b) Soldering should be done quickly as following.

(c) Soldering flux should be rosin flux and not containmore than 0.2wt% chlorine.Soldering flux should be removed after soldering.

(2) CleaningSoldering flux should be removed after soldering.Soldering flux may cause malfunction or degradation ofcharacter unless sufficiently cleaned.

3. Caution (Handling and Storage)(1) The optical filter of the sensor should not be scratched or

soiled.(2) Strong shock should be avoided.(3) Electrostatics and strong electromagnetic field should be

avoided.(4) The sensor should be kept on conductive sponge.(5) High temperature, high humidity, fluid such as water or

alcohol etc., corrosive gas (SO2, Cl2, NOX etc.) and seabreeze should be avoided.

! Notice

Temperature of soldering iron : 350˚C

Distance from can case

1 to 3mm

Over 3mm

Period of time

Within 3 seconds per point

Within 10 seconds per point

Note:1. Export Control

<For customers outside Japan>No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, orotherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)goods or systems specially designed or intended for military end-use or utilization by military end-users.<For customers in Japan>For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is requiredfor export.

2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especiallyhigh reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use inapplications other than those specified in this catalog.q Aircraft equipment w Aerospace equipmente Undersea equipment r Power plant equipmentt Medical equipment y Transportation equipment (vehicles, trains, ships, etc.)u Traffic signal equipment i Disaster prevention / crime prevention equipmento Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above

3. Product specifications in this catalog are as of May 2007. They are subject to change or our products in it may be discontinued without advance notice. Pleasecheck with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or productengineers.

4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications ortransact the approval sheet for product specifications before ordering.

6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effectof our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described orcontained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentionedabove under licenses without our consent.

7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.

International Division3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]

Head Office1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, JapanPhone: 81-75-951-9111

http://www.murata.com/




Pyroelectric Infrared Sensors - Farnell element14Pyroelectric Infrared Sensors Cat.No.S21E-5 Murata...

Documents

Transcript of Pyroelectric Infrared Sensors - Farnell element14Pyroelectric Infrared Sensors Cat.No.S21E-5 Murata...