Pyroelectric Infrared Sensors - docs-emea.rs-online.com · CONTENTS SMD-Dual / Parallel Quad Type...

22
Pyroelectric Infrared Sensors Cat.No.S21E-7 • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Note P17E.pdf 10.11.1

Transcript of Pyroelectric Infrared Sensors - docs-emea.rs-online.com · CONTENTS SMD-Dual / Parallel Quad Type...

Pyroelectric Infrared Sensors

Cat.No.S21E-7

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

for EU RoHS Compliant • All the products on this catalog are complied with EU RoHS. • EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use

of Certain Hazardous Substances in Electrical and Electronic Equipment". • For more details, please refer to our website 'Murata's Approach for EU RoHS'

(http://www.murata.com/info/rohs.html).

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

CONTENTS

SMD-Dual / Parallel Quad Type Pyroelectric Infrared Sensor IRS Series

Dual Type Pyroelectric Infrared Sensor IRA-E700 Series

Quad Type Pyroelectric Infrared Sensor IRA-E900 Series

2

3

5

6

7

10

18

1

2

3

Lens

Notice

Pyroelectric Infrared Sensor IRS/IRA Series Characteristics Data

Part Numbering

Recycled Paper

HIC® in this catalog are the trademarks of Murata Manufacturing Co., Ltd.

1

2

3

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

2

◦Part Numbering

Pyroelectric Infrared Sensor

❶Product ID

❷Type

❸Characteristics

❹Individual Specification Code

* Part Number shows only an example which might be different from actual part number.* "❸Characteristics" and "❹Individual Specification Code" might have different digit number from actual Part Number.

(Part Number) IR S- B210ST 01

❶ ❷ ❸ ❹

-R1

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

1

3

2.4

0.5

0.6 0.6

0.5

4.7

4.9

3.8

3.8

4.7

1.9

1.0

0.4

3.3

2.5

GND Out Put Terminal (Vout)

Power Supply Terminal(Vin)

General Tolerance: ±0.2(in mm)

Part Number

Responsivity (500K, 1Hz, 1Hz)

Field of View

Optical Filter

Electrode

Supply Voltage

Operating Temperature

Storage Temperature

3.6mVp-p (Typ.)θ1=70° θ2=50°3μm long-pass

−2 to 15V

-40 to 70℃-40 to 85℃

IRS-B210ST01

SMD-Dual Type Pyroelectric Infrared Sensor IRS-B210ST01 Series

Pyroelectric Infrared Sensors for Reflow Soldering

SMD type Pyroelectric infrared sensors, IRS series, exhibit high sensitivity and reliable performance made possible by Murata's ceramic technology and packaging technology developed over many years.IRS-B series is approximately 50% smaller in volume and 10% thinner than our previous surface mount model. Compared with common lead-type models, it is significantly smaller with a lower profile approximately 20% less in volume and 50% less in thickness than the former.

▊Features1. Reflow surface-mounting support2. Smallest and ultra-thin throughout the trade

(4.7×4.7×2.4mm)3. High sensitivity4. Achieves superior electromagnetic noise resistance characteristics

▊Applications1. Human detection2. TV3. Air conditioning 4. Digital photo-frame5. Personal computers6. Automatic switches for lighting equipment7. WEB cameras (IP cameras)8. Automatic warm water cleaning toilet seats9. Security devices10. Other automatic switches (ex. :LCD monitors, Air purifiers, Ventilation fans)11. Home electronics for Eco

▊Rating (25˚C)

▊Dimensions & Circuit Diagrams

1.20

0.80

2.50

(in mm)

d

s

g

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

1

4

2.4

0.5

0.60.6

0.5

4.7

(4)(3)(2)(1)

(5)

4.9

3.81.4

3.8

4.7

0.9

02X

1.9

1.0

0.4

3.3

2.5

0.3

GND

Out Put Terminal(Vout)

Power SupplyTerminal

(Vin)

General Tolerance: ±0.2(in mm)

SMD-Parallel Quad Pyroelectric Infrared Sensor IRS-B340ST02 Series

Pyroelectric Infrared Sensors for Reflow Soldering

Part Number

Responsivity (500K, 1Hz, 1Hz)

Field of View

Optical Filter

Electrode

Supply Voltage

Operating Temperature

Storage Temperature

3.6mVp-p (Typ.)θ1=70° θ2=50°3μm long-pass

−2 to 15V

-40 to 70℃-40 to 80℃

IRS-B340ST02

SMD type Pyroelectric infrared sensors, IRS series, exhibit high sensitivity and reliable performance made possible by Murata's ceramic technology and packaging technology developed over many years.IRS-B series is approximately 50% smaller in volume and 10% thinner than our previous surface mount model. Compared with common lead-type models, it is significantly smaller with a lower profile approximately 20% less in volume and 50% less in thickness than the former.

▊Features1. Reflow surface-mounting support2. Smallest and ultra-thin throughout the trade

(4.7×4.7×2.4mm)3. High sensitivity4. Achieves superior electromagnetic noise resistance characteristics

▊Applications1. Human detection2. TV3. Air conditioning 4. Digital photo-frame5. Personal computers6. Automatic switches for lighting equipment7. WEB cameras (IP cameras)8. Automatic warm water cleaning toilet seats9. Security devices10. Other automatic switches (ex. :LCD monitors, Air purifiers, Ventilation fans)11. Home electronics for Eco

▊Rating (25˚C)

▊Dimensions & Circuit Diagrams

0.40

1.10

1.10

2.60

1.35

0.40 0.4750.475 (in mm)

d (Vin)

s (Vout)

g (GND)

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

2

5

(in mm)

(in mm)

Dual Type Pyroelectric Infrared Sensor IRA-E700 Series

Pyroelectric Infrared Sensors

Pyroelectric infrared sensors, IRA series, exhibit high sensitivity and reliable performance made possible by Murata's ceramic technology and Hybrid IC technique expertise developed over many years.IRA-E700 series realizes cost benefits and higher performance with a new infrared sensor element of improved material parameters and fabrication.IRA-E700 series is available in two types.IRA-E710ST0 has enhanced immunity to RFI (Radio Frequency Interference).

▊Features1. High sensitivity and excellent S/N ratio2. High stability to temperature changes3. Slight movement can be detectable.4. High immunity to external noise (Vibration, RFI etc.)5. Custom design is available.6. Higher in cost-performance

▊Applications1. Security2. Lighting appliances3. Household or other appliances

▊Rating (25˚C)

▊Dimensions & Circuit Diagrams

IRA-E700ST0

∗Specified on the bottom of stem

General Tolerance : ±0.2

IRA-E710ST0

Part Number

Responsivity (500K, 1Hz, 1Hz)

Field of View

Optical Filter

Electrode

Supply Voltage

Operating Temperature

Storage Temperature

4.3mVp-p (Typ.)θ1=θ2=45°

5μm long-pass(2.0×1.0mm)×2

2 to 15V-40 to 70℃-40 to 85℃

IRA-E700ST0 IRA-E710ST0

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

3

6

Quad Type Pyroelectric Infrared Sensor IRA-E900 Series

Pyroelectric Infrared Sensors

Pyroelectric infrared sensors, IRA series, exhibit high sensitivity and reliable performance made possible by Murata's ceramic technology and Hybrid IC technique expertise developed over many years.IRA-E900 series realizes cost benefits and higher performance with a new infrared sensor element of improved material parameters and fabrication.IRA-E900 series is available in two types.IRA-E910ST1 has enhanced immunity to RFI (Radio Frequency Interference).

▊Features1. High sensitivity and excellent S/N ratio2. High stability to temperature changes3. Slight movement can be detectable.4. Non directional sensing with wide F.O.V.5. High immunity to external noise (Vibration, RFI etc.)6. Custom design is available.7. Higher in cost-performance

▊Applications1. Security2. Lighting appliances3. Household or other appliances

▊Rating (25˚C)

▊Dimensions & Circuit Diagrams

IRA-E900ST1

(in mm)

(in mm)

IRA-E910ST1

∗Specified on the bottom of stem

General Tolerance : ±0.2Part Number

Responsivity (500K, 1Hz, 1Hz)

Field of View

Optical Filter

Electrode

Supply Voltage

Operating Temperature

Storage Temperature

3.3mVp-p (Typ.)θ1=θ2=41°

5μm long-pass(1.1×1.1mm)×4

3 to 15V-25 to 55℃-40 to 85℃

IRA-E900ST1 IRA-E910ST1

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

3

7

▊Spectral Response of Window Materials (IRA Series)

▊Frequency Characteristics

100

04000

Wave Number (cm–1)

80

60

40

20

3500 3000 2500 2000 1800 1600 1400 1200 1000 800

2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0

Wave Length (μm)

(%)

Pyroelectric Infrared Sensor IRS/IRA Series Characteristics Data

▊Spectral Response of Window Materials (IRS Series)

04500 4000 3500 3000 2500 2000 1750

Wave Number (μm)1500 1250 1000 750 500

10

20

30

40

50

60

70

80

90

100%T

Tran

smis

sion

Rat

io (%

)

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

5

8

Pyroelectric Infrared Sensor IRS/IRA Series Characteristics Data

▊Test Method of Sensitivity

▊Typical Application Circuit (Human Detection)

*1 IRA-E700/E900 Series

IRS-A200ST01 Series500K

Black Body

1Hz

Mechanical Chopper

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

5

9

After test completion, leave for three hours in normal humidity temperature conditions, and then measure.1. External appearance:

No significant damage2. Sensitivity:

Tolerance within 20% deviation from original value

3. Noise:Maximum tolerance +100mV of original value

No generation of bubbles

▊Reliability TestIRS series, IRA-E700 series, IRA-E900 series

Item

High Temperature

Low Temperature

Humidity

Heat Cycle

Vibration

Shock

Soldering Heat

Hermetic Sealing

100℃ for 500 hrs.—40℃ for 500 hrs.60℃, 95% RH for 500 hrs.20 times of following cycle.—25℃, 30 min.⇨Room temp., 30 min.⇩⇧Room temp., 30 min.⇦55℃, 30 min.Apply vibration of amplitude of 1.5mm with 10 to 55Hz band to each of 3 perpendicular directions for 60 min.Apply shock of 100G sine wave by standard shock tester to each of 3 perpendicular directions.Immerse up to 3.0mm from can case in solder bath of 260±5℃ for 10±1 s.Conform to MIL-STD-202F chapter 112D, condition D.Immerse in fluorocarbon bath (FC-40) of 125±5℃ for 20 s.

Test Conditions Criteria

Pyroelectric Infrared Sensor IRS/IRA Series Characteristics Data

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

Note • Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

5

10

Pyroelectric Infrared Sensors/Lens(IRS Series)

IML-0650

1.7(

m)

0.6(

m)

6.0(m)

2.8(m)

Unit: mDistance: 4.0m

ø11ø9.5

ø9.5

2

(1.8)

60˚

(5.13)

(1.4

5)(4

.5)

4.3

3.55

10.2

52.

8

2.8

0.1

(6.6

6)

ø8

0.75 5R6.5

0.75

0.79902B

4-ø0.5

ø12.79ø10.2

5

(in mm)General tolerance: ±0.15mm

1.7(

m)

0.6(

m)

6.0(m)

2.8(m)

Unit: mDistance: 4.0m

Sensor : IRS-B210ST01

Sensor : IRS-B340ST02

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

Note • Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

11

Pyroelectric Infrared Sensors/Lens(IRS Series)

IML-0654

Unit: mDistance: 1.0m

1.00

0.50

0.00

-0.50

-1.00-1.50 -1.00 -0.50 0.00 0.50 1.00 1.50

Unit: mDistance: 1.0m

1.00

0.50

0.00

-0.50

-1.00-1.50 -1.00 -0.50 0.00 0.50 1.00 1.50

SR49.5

0.40.6

(0.5)0.5

(1.277)

16.2

15SR50

13

A

1110(0.5)

(0.5)

(0.6)

(0.5

)

1.52

8.5

14 60º

section A

hook

hook

11 8 7

6.1

3.2

1.58

1.4

(1)

(1.4

)

87.

5

3.2

(1.777)

3.22º 2º

Sensor : IRS-B210ST01

Sensor : IRS-B340ST02

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

12

Pyroelectric Infrared Sensors/Lens(IRA Series)

IML-0669

Thickness 0.4t

21.5

ø11

ø10.

2ø1

2R6.5

SR5.5 1.25

43.

257.

254

0.90.5

0.07

1.55

1.13

0.57

Sensor: IRS-B210ST01Fresnel Lens: IML-0669

Distance: 2.5m

max: 7.5m

Dis

tanc

e: 2

.5m

max

: 6.0

m

Unit: mDistance: 2.5m

Sensor: IRS-B210ST01Fresnel Lens: IML-0669

Distance: 2.5m

max: 7.5m

Dis

tanc

e: 2

.5m

max

: 6.0

m

Distance: 2.5m

Dis

tanc

e: 2

.5m

Unit: mDistance: 2.5m

Sensor : IRS-B210ST01

Sensor : IRS-B340ST02

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

5

13

Pyroelectric Infrared Sensors/Lens(IRA Series)

IML-0636

IML-0635

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

5

14

Pyroelectric Infrared Sensors/Lens(IRA Series)

IML-0637

IML-0638

6.11m

4.91m

3m

3m

0m

Vertical

3m

On the Floor

3m

45.5º

3m0m

45.5º

42º

42º

Horizontal

Vertical

Pyroelectric ElementHorizontalAssembled with Murata sensor IRA-E700 Series.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

5

15

(in mm)

PPGI0601

Pyroelectric Infrared Sensors/Lens(IRS/IRA Series)

PPGI0626

(in mm)

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

16

(in mm)

Pyroelectric Infrared Sensors/Lens(IRS/IRA Series)

PPGI0902

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

17

Pyroelectric Infrared Sensors/Lens(IRA Series)

Fresnel lens are available upon request.

IMD-FL01G

IMD-FL01W

15 deg.

0

1.0

2.0

m

1.0

2.0

Angle of Vertical

Angle of Horizontal

0

1.0

2.0

3.0

m

1.0

2.0

3.0

5.04.0 m

52 deg.

34 deg.

12.5 deg.

1.0 3.02.0 5.04.0 m1.0 3.02.0

ï Assembled with Murata sensor IMD series

15 deg.

0

1.0

2.0

m

1.0

2.0

Angle of Vertical

Angle of Horizontal

0

1.0

2.0

3.0

m

1.0

2.0

3.0

5.04.0 m

52 deg.

34 deg.

12.5 deg.

1.0 3.02.0 5.04.0 m1.0 3.02.0

ï Assembled with Murata sensor IMD series

15 deg.

0

1.0

2.0

m

1.0

2.0

Angle of Vertical

Angle of Horizontal

0

1.0

2.0

3.0

m

1.0

2.0

3.0

5.04.0 m

52 deg.

34 deg.

12.5 deg.

1.0 3.02.0 5.04.0 m1.0 3.02.0

ï Assembled with Murata sensor IMD series

15 deg.

0

1.0

2.0

m

1.0

2.0

Angle of Vertical

Angle of Horizontal

0

1.0

2.0

3.0

m

1.0

2.0

3.0

5.04.0 m

52 deg.

34 deg.

12.5 deg.

1.0 3.02.0 5.04.0 m1.0 3.02.0

ï Assembled with Murata sensor IMD series

5.020.522.5

ø2.0

1.0

16.4

5.1

Focal point (Pyro-Element)

12.8

16.5

21.5

26.5

(in mm)General tolerance : ±0.4

5.020.522.5

ø2.0

1.0

16.4

5.1

Focal point (Pyro-Element)

12.8

16.5

21.5

26.5

(in mm)General tolerance : ±0.4

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

18

Notice

1. Caution (Design)(1) Please make sure that your product has been evaluated

and confirmed against your specifications when our product is mounted to your product.

(2) Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product.

(3) In case of outdoor use, suitable optical filter and water and humidity proof structure should be applied.

(4) To prevent failure or malfunction, please use a stabilized power supply.

(5) Please avoid using the sensor in the following conditions because it may cause failure or malfunction.(a) in such a fluid as water, alcohol etc. corrosive gas

(SO2, Cl2, NOX etc.) or sea breeze(b) in high humidity(c) in a place exposed directly to sunlight or headlights of

automobile(d) in a place exposed to rapid ambient temperature

change(e) in a place exposed directly to an air-conditioner or

heat vent(f) strong vibrations(g) in a place exposed to strong electromagnetic field(h) in such a place where infrared ray is shaded(i) in any other place similar to the above (a) through (h)

2. Caution (Handling and Storage)(1) The optical filter of the sensor should not be scratched or

soiled.(2) Strong shock should be avoided.(3) Electrostatics and strong electromagnetic field should be

avoided.(4) The sensor should be kept on conductive sponge.(5) High temperature, high humidity, fluid such as water or

alcohol etc., corrosive gas (SO2, Cl2, NOX etc.) and sea breeze should be avoided.

▊Notice

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

19

Notice

3.Caution (Mounting)

(IRS Series)

Soldering Conditions

Following figure shows temperature profile when reflow soldering.

・Cleaning after reflow soldering should not be applied.・Flow soldering should not be applied.・Please contact us when using other reflow profile except following reflow profile.

(1) Cleaning after reflow soldering should not be applied. Optical filter of sensor should not be soiled because it may cause failure or malfunction.(2) Please follow soldering conditions described in the specification. This product can permanently stop operating if the

piezoelectric(pyroelectric) characteristic is decreased due to excessive heating.

3.Caution (Mounting)

(IRA Series)(1) Soldering

(a) Hand soldering should be applied.

(b) Soldering should be done quickly as following.

(c) Soldering flux should be rosin flux and not contain more than 0.2wt% chlorine.Soldering flux should be removed after soldering.

(2) CleaningSoldering flux should be removed after soldering.Soldering flux may cause malfunction or degradation of character unless sufficiently cleaned.

▊Notice

245ºC

220ºC

180ºC150ºC

100ºC

Temp. (ºC)

Heating period80-100 sec.

(20sec.min.)

30-40sec.max.

120 sec.min.

Pre-Heating150-180ºC

Heating220ºCmin.

Gradual in air

Time (sec.)

2ºC/sec. max.

Peak temperature on product surface 245ºC, 5sec. max.

1. Cleaning after reflow soldering should not be applied.Optical filter of sensor should not be soiled because it may cause failure or malfunction.

2. Please follow soldering conditions described in the specification. This product can permanently stop operating if the piezoelectric(pyroelectric) characteristic is decreased due to excessive heating.

Temperature of soldering iron : 350˚C

Distance from can case1 to 3mmOver 3mm

Period of timeWithin 3 seconds per point

Within 10 seconds per point

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Note P17E.pdf10.11.1