PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection...

16
1 PWM Solar Charge Controller www.lgis.cc The PV solar charge controller is a smart device which designed for the large-scale photovoltaic off-grid power generation system. The controller can control multi-line solar arrays matrix and achieve the battery groups charging and discharging functions, in accordance with the trend of the battery terminal voltage automatic control PV arrays turn on or cut away, not only can take full advantage of the valuable resource of solar module, battery pack but also to ensure a safe and reliable work. The controller can control charging and discharging automatically by the advanced algorithm. This would optimize charging and discharging process to improve system performance and increase the battery’s service life. Meanwhile, the controller has multiple self-diagnosis and electronic protection function, such as under-voltage protection, over-voltage protection, thunder stroke protection, etc. All of these will extend the service life of the controller. Products are mainly used independent home PV system, telecommunications base stations, fishermen and herdsmen of electricity, as well as in remote mountainous and border posts PV power supply. To meet different power stationsneed, there are 24V48V96V120V192V220V240V360V492V and other normal series voltage level base on different battery voltage of off-grid PV power station system project. General Description

Transcript of PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection...

Page 1: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

1

PWM Solar Charge Controller

www.lgis.cc

The PV solar charge controller is a smart device which designed for the large-scale

photovoltaic off-grid power generation system. The controller can control multi-line solar

arrays matrix and achieve the battery groups charging and discharging functions, in

accordance with the trend of the battery terminal voltage automatic control PV arrays turn

on or cut away, not only can take full advantage of the valuable resource of solar module,

battery pack but also to ensure a safe and reliable work. The controller can control charging

and discharging automatically by the advanced algorithm. This would optimize charging

and discharging process to improve system performance and increase the battery’s service

life. Meanwhile, the controller has multiple self-diagnosis and electronic protection function,

such as under-voltage protection, over-voltage protection, thunder stroke protection, etc. All

of these will extend the service life of the controller. Products are mainly used independent

home PV system, telecommunications base stations, fishermen and herdsmen of electricity,

as well as in remote mountainous and border posts PV power supply.

To meet different power stations’need, there are 24V、48V、96V、120V、192V、220V、

240V、360V、492V and other normal series voltage level base on different battery voltage

of off-grid PV power station system project.

General Description

Page 2: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

2

For desolate area like mountain, island, pasturing area, etc.

For transportation system like beacon light, traffic light, street light, etc.

For communication system: unattached operation microwave middle station, optical

cable maintenance station, etc.

Independent Home PV power station

Outdoor advertising project, government demonstration project, Landscape lighting

Projects.

Digital design, modular structure, stable and reliable.

LCD panel (backlighting) show working parameters and the status.

High efficiency by PWM charging method.

Be able to offer DC power supply (optional).

Anti-reverse connection protection make there is no reversely charging in night. Also

with over-charge, limited charging current &voltage protections for battery.

Users can adjust the working parameters, such as over-charge voltage, over-charge

recovery voltage, delay time to cut off charging and delay time to recovery charging,

etc.

With alarm function in system to tell the abnormal status.

Equipped with data communication function (optional).

Day and night double process mode.

Scientific cooling design which make the PCB board always work under best

temperature environment. This will greatly increase the life of the controller.

Wall mounting type is easy for installation.

Performance Features

Application Area

Page 3: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

3

SDC-24V Series 50A-80A

System Capability

Model SDC24V-50A SDC24V-60A SDC24V-80A

Rated PV power watts 1200W 1440W 1920W

Module arrays input [array] 1

Rated charging current [A] 50A 60A 80A

Rated battery bank voltage [V] 24V

VOC of PV arrays Max. ≤48V

Over-charge voltage of batteries 30V adjustable

Over-charge recovery voltage 27V adjustable

Battery float charging voltage 28V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Technical parameters

Page 4: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

4

SDC-24V Series 100A-150A

System Capability

Model SDC24V-100A SDC24V-120A SDC24V-150A

Rated PV power watts 2400W 2880W 3600W

Module arrays input [array] 1 or 2

Rated charging current [A] 100A 120A 150A

Rated battery bank voltage [V] 24V

VOC of PV arrays Max. ≤48V

Over-charge voltage of batteries 30V adjustable

Over-charge recovery voltage 27V adjustable

Battery float charging voltage 28V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 5: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

5

SDC-48V Series 50A-80A

System Capability

Model SDC48V-50A SDC48V-60A SDC48V-80A

Rated PV power watts 2400W 2880W 3840W

Module arrays input [array] 1

Rated charging current [A] 50A 60A 80A

Rated battery bank voltage [V] 48V

VOC of PV arrays Max. ≤96V

Over-charge voltage of batteries 60V adjustable

Over-charge recovery voltage 54V adjustable

Battery float charging voltage 56V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 6: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

6

SDC-48V Series 100A-150A

System Capability

Model SDC48V-100A SDC48V-120A SDC48V-150A

Rated PV power watts 4800W 5760W 7200W

Module arrays input [array] 1 or 2

Rated charging current [A] 100A 120A 150A

Rated battery bank voltage [V] 48V

VOC of PV arrays Max. ≤96V

Over-charge voltage of batteries 60V adjustable

Over-charge recovery voltage 54V adjustable

Battery float charging voltage 56V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 7: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

7

SDC-96V Series 50A-80A

System Capability

Model SDC96V-50A SDC96V-60A SDC96V-80A

Rated PV power watts 4800W 5760W 7680W

Module arrays input [array] 1

Rated charging current [A] 50A 60A 80A

Rated battery bank voltage [V] 96V

VOC of PV arrays Max. ≤96V

Over-charge voltage of batteries 120V adjustable

Over-charge recovery voltage 108V adjustable

Battery float charging voltage 112V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 8: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

8

SDC-96V Series 100A-150A

System Capability

Model SDC96V-100A SDC96V-120A SDC96V-150A

Rated PV power watts 9600W 11.52W 14.4KW

Module arrays input [array] 1 or 2

Rated charging current [A] 100A 120A 150A

Rated battery bank voltage [V] 96V

VOC of PV arrays Max. ≤96V

Over-charge voltage of batteries 120V adjustable

Over-charge recovery voltage 108V adjustable

Battery float charging voltage 112V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 9: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

9

SDC-120V Series 50A-80A

System Capability

Model SDC120V-50A SDC120V-60A SDC120V-80A

Rated PV power watts 6000W 7200W 9600W

Module arrays input [array] 1

Rated charging current [A] 50A 60A 80A

Rated battery bank voltage [V] 120V

VOC of PV arrays Max. ≤240V

Over-charge voltage of batteries 150V adjustable

Over-charge recovery voltage 135V adjustable

Battery float charging voltage 140V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 10: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

10

SDC-120V Series 100A-150A

System Capability

Model SDC120V-100A SDC120V-120A SDC120V-150A

Rated PV power watts 12KW 14.4KW 18KW

Module arrays input [array] 1 or 2

Rated charging current [A] 100A 120A 150A

Rated battery bank voltage [V] 120V

VOC of PV arrays Max. ≤240V

Over-charge voltage of batteries 150V adjustable

Over-charge recovery voltage 135V adjustable

Battery float charging voltage 140V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 11: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

11

SDC-192V Series 50A-80A

System Capability

Model SDC192V-50A SDC192V-60A SDC192V-80A

Rated PV power watts 9600W 11.52KW 15.36KW

Module arrays input [array] 1

Rated charging current [A] 50A 60A 80A

Rated battery bank voltage [V] 192V

VOC of PV arrays Max. ≤384V

Over-charge voltage of batteries 240V adjustable

Over-charge recovery voltage 216V adjustable

Battery float charging voltage 224V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 12: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

12

SDC-192V Series 100A-150A

System Capability

Model SDC192V-100A SDC192V-120A SDC192V-150A

Rated PV power watts 19.2KW 23KW 28.8KW

Module arrays input [array] 1 or 2

Rated charging current [A] 100A 120A 150A

Rated battery bank voltage [V] 192V

VOC of PV arrays Max. ≤384V

Over-charge voltage of batteries 240V adjustable

Over-charge recovery voltage 216V adjustable

Battery float charging voltage 224V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 13: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

13

SDC-220V Series 50A-80A

System Capability

Model SDC220V-50A SDC220V-60A SDC220V-80A

Rated PV power watts 11KW 13.2KW 17.6KW

Module arrays input [array] 1

Rated charging current [A] 50A 60A 80A

Rated battery bank voltage [V] 220V

VOC of PV arrays Max. ≤440V

Over-charge voltage of batteries 275V adjustable

Over-charge recovery voltage 250V adjustable

Battery float charging voltage 256V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 14: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

14

SDC-220V Series 100A-150A

System Capability

Model SDC220V-100A SDC220V-120A SDC220V-150A

Rated PV power watts 22KW 26.4KW 33KW

Module arrays input [array] 1 or 2

Rated charging current [A] 100A 120A 150A

Rated battery bank voltage [V] 220V

VOC of PV arrays Max. ≤440V

Over-charge voltage of batteries 275V adjustable

Over-charge recovery voltage 250V adjustable

Battery float charging voltage 256V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 15: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

15

SDC-240V Series 50A-80A

System Capability

Model SDC240V-50A SDC240V-60A SDC240V-80A

Rated PV power watts 12KW 14.4KW 19.2KW

Module arrays input [array] 1

Rated charging current [A] 50A 60A 80A

Rated battery bank voltage [V] 240V

VOC of PV arrays Max. ≤480V

Over-charge voltage of batteries 300V adjustable

Over-charge recovery voltage 270V adjustable

Battery float charging voltage 280V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg

Page 16: PWM Solar Charge Controller filePWM Solar Charge Controller ... Anti-reverse connection protection make there is no reversely charging in night. ... Consumption at standby [mA]

16

SDC-240V Series 100A-150A

System Capability

Model SDC240V-100A SDC240V-120A SDC240V-150A

Rated PV power watts 24KW 28.8KW 36KW

Module arrays input [array] 1 or 2

Rated charging current [A] 100A 120A 150A

Rated battery bank voltage [V] 240V

VOC of PV arrays Max. ≤480V

Over-charge voltage of batteries 300V adjustable

Over-charge recovery voltage 270V adjustable

Battery float charging voltage 280V

Time delay to cut-off charge default are 1 minutes Time delay to charge recovery default are 10 minutes

Performance

Consumption at standby [mA] <50mA (backlight off)

Consumption at night [mA] <20mA (backlight off)

Control PWM

Running mode Working continuously

Function Charge and Control

Operating Temperature Range -25℃ to +50℃

Cooling Method Convection with double cooling fans

Ambient Humidity 0%~98% Non-condensing

Altitude [m] ≤2000m (without power derating)

General Data

Terminal Universal KE series

LCD Display LCD

Display Language English

Data communication RS232 or RS485

Ingress Protection Class IP20 (indoor)

Noise [dB] <40dB

Mounting Wall mounting type

Dimensions (W*D*H) [mm] 345*155*395

Net weight [kg] 12Kg