DC Isolation switch

The DC Isolators Switches are used for isolating generation & loads. DC Isolators Switches are used between high voltage DC PV arrays and grid-connect inverters. DC Isolator Switch for solar power installations is specifically developed for arduous DC disconnect applications.

DC Isolators Switches located adjacent to the inverter and are required to provide means of manually isolating the entire PV array during system installation or any subsequent maintenance.

There are Two Types of DC Isolators Switch :

DC Isolators. AC Isolators.

A Switch for isolating an electrical circuit from its source of power; it is intended to be operated only after the circuit has been opened by some other means. The use of isolating switches makes it possible to simplify the arrangement of switching points and transformer substations and to eliminate expensive high- voltage circuit breakers.

Benefits of DC Isolators Switch : Small size. Easy to install. Protecting people against electric

shock. Protection against overvoltage. Degree of protection to IP66. What do they look like? The DC IsolatIon switches are a rotary type, and the most common version has a red switch with a yellow background around the switch. Avanco brand switches have the brand on the front. Alternatively the isolator may be installed in lockable enclosure with a flip opaque or clear lid. Under the lid is a black switch and there is external labeling of the AVANCO brand on the front.

For More Information Visit Website: http://www.pvconnections.com/